1. PROTECÇÃO do AMBIENTE
e
SEGURANÇA
Seminário: I Jornada de Ambiente da Força Aérea, 10 de Dezembro 2010
ACARE:
Advisory Council for Aeronautics Research in Europe
ACARE PLENARY COUNCIL
Co-Chairmanship: . Technical
. Institutional
ACARE Plenary Council
• 27 Member States
• European Commission Integration Team
• Manufacturing Industry (ASD)
• Airlines (IATA, AEA) Strategy
• Airports (ACI Europe) MEMBERS
Member
• Aeronautical Research STATES
States
Implementation
Establishments (EREA)
• Universities (EASN) HR &
Communication Research
• Regulators ( EASA, Providers
EUROCONTROL) infrastructure
Over 40 Members
Stakeholders of the European Air Transport System
2
2. ACARE and Clean Sky
Vision 2020 (January 2001)
• To meet Society’s needs
• To achieve global leadership for Europe
ACARE
October 2002 : The Strategic Research Agenda (SRA) 5 Challenges
Air Transport
Quality and
Environment
Safety System EfNiciency Security
Affordability
CLEAN SKY
October 2004 : The SRA 2 High level Target Concepts
Very Low Ultra Green Highly Highly time Ultra Secure
Customer 22nd Century
Cost ATS ATS efNicient ATS ATS
oriented ATS
• 80% cut in NOx emissions
• Halving perceived aircraft noise
• 50% cut in CO2 emissions per passenger‐Km by drastic fuel consumption
reduction
• A green design, manufacturing, maintenance and disposal product life cycle
3
Joint Technology Initiative
Within FP7, « level 3 projects »
System‐level integration into full scale demonstrators
Affordability and competitiveness
Timeliness
Involvement of all sectors of aeronautics
« Integrated Technology Demonstrators »
Clean Sky Joint Technology Initiative
With a strong involvement of the large aeronautic companies:
internal R&T capabilities + knowledge of the market constraints for
future aircraft
4
3. Benefits of investing in aeronautics technologies
Environment
Greener products into service sooner
Less noise, lower emissions
Reduced fuel consumption
Greener design, production and maintenance
Faster introduction of innovative technologies
Application across all commercial aircraft
Socio-economic impact
Integrating European industry
Open access to SMEs and New Member States
Expected multiplier effect via complementary National Programmes
A competitive European industry leading the introduction of more
environmentally friendly products and sustaining the creation of
highly qualified jobs
Major contribution to sustainable growth in Europe
5
Aerospace Technology 2010, Stockholm,
Technology Readiness Level
6
4. Towards a High maturity
A high level of « technology readiness »: the technologies
are integrated into large demonstrators, in-flight or on-
ground
Demonstrators definition close to the market needs: the
demonstrator is the last R&T phase, before starting a
development
Schedule is key to keep this link (be neither too early, nor too
late)
A large part of this downstream research activity lays within
big players, « integrators » - a typical feature of aeronautics
These activities must be thoroughly coordinated
A large programme focused on environment…
… and compe++veness
These features create the condi0ons for a Public‐
Private Partnership 7
Aerospace Technology 2010, Stockholm,
PublicPrivate Partnership
• Start: 02/2008
• Multi‐year research project on Greening of
Aeronautics: up to 2017 to the latest
• Total budget 1.6 billion €, one of the largest
• European research programmes ever
• 800 million € from Commission incash
• 800 million € from industry inkind
8
5. Split of the 800 M€ public funding
~500 partners (*) through calls
74 associates
ITD leaders
Up to 50%
Up to 25%
At least
25%
(*) ~100 today
MEMBERS are committed for the full duration of CSJU
PARTNERS are committed for the duration of their topic(s)
9
Integrated Technology Demonstrators
Smart Fixed Wing Aircraft
Green Rotorcraft
Green Regional Aircraft
Eurocopter & AgustaWestland
Alenia &
Airbus & EADS-CASA
SAAB
DLR & Thales
Eco-Design
Technology Evaluator
Sustainable and
Green Engines
Dassault & Fraunhofer
Systems for Green
Operations
Rolls-Royce &
Safran Thales &
Liebherr
10
6. Targets
Preliminary targets were set for each Integrated Technology
Demonstrator »: CO2, NOx, noise
Integrated at aircraft level (2020 as compared to 2000)
Targets to be refined by end of October 2010
Wide Narrow Regional Bizjets Rotor
body body craft ACARE targets:
- 50% C02
CO2 - 30% - 20% - 40% - 30% - 30%
- 50% noise
NOX - 30% - 20% - 40% - 30% - 60%
- 80% Nox
Noise - 20 dB - 15 dB - 20 dB - 10 dB - 10dB in 2020 vs 2000
11
Expected results from Clean Sky
12
Aerospace Technology 2010, Stockholm,
7. 50%CO2
80% NOx
50%
noise
Green
design..
13
• Engines
• Loads & Flow Control
Reduced fuel consumption • New Aircraft ConNigurations
Reduction of CO2 and NOX
• Low weight
• Aircraft Energy Management
• Mission & Trajectory Management
• Engines
External noise reduction • Mission & Trajectory Management
• ConNigurations
• Rotorcraft Noise Reduction
“Ecolonomic” life cycle Aircraft Life Cycle
14
8. Links with:
“Sustainable and Green Engines” – ITD Smart Wing Technologies
CROR engine Technology Development
“System for Green Operation” – ITD”
Technology Integration
Management of Aircraft / Large Scale Flight Demonstration
Management of Trajectories and Natural Laminar Flow (NLF)
Missions Hybrid Laminar Flow (HLF)
Active and passive load control
Novel enabling materials
Innovative manufacturing scheme
Innovative Powerplant Integration
Technology Integration
Large Scale Flight Demonstration
Impact of airframe flow field on Propeller design
(acoustic, aerodynamic, vibration)
Impact of open rotor configuration on airframe
(Certification capabilities, structure, vibrations...)
Innovative empennage design
Output providing data to:
CleanSky Technology Evaluator
15
SFWA technologies for a Green
Air Transport System
16
9. 17
Aerospace Technology 2010, Stockholm,
Smart Passive Laminar Flow Wing
Design of an all new natural laminar wing
Proof of natural laminar wing concept in wind tunnel tests
Use of novel materials and structural concepts
Exploitation of structural and system integration together with tight tolerance / high quality
manufacturing methods in a large scale ground test demonstrator
Large scale flight test demonstration of the laminar wing in operational conditions
Port wing Starboard wing
Laminar wing structure Laminar wing structure
concept option 2 concept option 1
18
10. Reduced fuel • Engines
consumption (CO2 & • Loads & Nlow control
NOx reduction • New Aircraft ConNigurations
CO up to 20% • Low weight
• Aircraft Energy Management
NOx up to 60% • Mission & Trajectory Management
External noise • Engines
reduction • Mission & Trajectory Management
• ConNiguration
Noise up to 20 dB
• Rotorcraft noise reduction
« Ecolonomic »
life cycle
• Aircraft Life Cycle
19
To develop and validate technologies
Contributing to the environmental targets
On 5 complementary demonstrator engines for regional, narrow body, wide body & rotorcraft
applications
Raising the Technology Readiness Levels to TRL 6
Contra-rotating open rotor (CROR) propulsion Advanced engine externals & installations including novel
systems, demonstrating noise attenuation
Feasibility of both geared & direct drive power
transmission
Ability to control contra-rotating propeller blade pitch For advanced geared fan engine concepts
Ability to control system noise levels equal to or better High efficiency LP spool technology
than current engines High speed LP turbine design
Aggressive mid turbine interduct
Lightweight Low Pressure (LP) systems for
turbofans, including For next generation rotorcraft engine
Composite fan blades & fancase High efficiency & lightweight compressor
Lightweight structures High efficiency & lightweight turbine
High efficiency low pressure turbine Low emission combustion chamber
20
12. Pitch Change
Mechanism
PGB
Modules, sub-systems, nacelle Rotating structure Power Turbine items Nacelle items
Bearings
items Airframer requirements
and installations Shafts PGB for alternate
Design integration, assembly architecture
Test Programme
Interim Review Prelim. DR Project completion
Nov. 2009 June 2011 2013
Open rotor technology development → full-scale engine demonstration
Concept studies Prelim. design Detail design Build and
Demo spec. Partner selection Manufacture test
Project launch Concept DR Critical DR
1 June 2008 Sept. 2010 Dec. 2011
23
• Power plant
Reduced fuel • Loads & Flow Control
consumption (CO2 & • New Aircraft ConNigurations
NOx reduction) • Low weight
• Aircraft Energy Management
• Mission & Trajectory Management
• Power Plant
External noise • Mission & Trajectory Management
reduction • ConNigurations
• Rotorcraft Noise Reduction
"Ecolonomic"
life cycle • Aircraft Life Cycle
24
13. Power plant
Reduced fuel Loads & Flow Control
consumption (CO2 & New Aircraft ConNigurations
NOx reduction) Low weight
Aircraft Energy Management
Mission & Trajectory Management
Power Plant
External noise Mission & Trajectory Management
reduction Con`igurations
Rotorcraft Noise Reduction
"Ecolonomic"
life cycle Aircraft Life Cycle
25
1. Innovative Rotor Blades
• Active blade devices
• Blade stall alleviation, pro`ile drag reduction (tayloring of blade design)
2. Drag reduction, required power reduction
Passive and active `low controls for helicopter and tiltorotor components
Integration of MR pylon, hub, aft body, tail, turboshaft engine installation
3. More electrical Helicopter
Elimination of noxious hydraulic `luid; optimised on‐board energy ; weight reduction
4. Lean powerplant
installation of a Diesel engine on a light single HC for low CO2 emission
5. EnvironmentFriendly Flight Path
Noise abatement with optimized `light procedures in VFR & IFR including ATM constraints
Fuel consumption and pollutant emissions reduction through a mission pro`ile
optimization
6. EcoDesign
Participation to generic studies +demo on speci`ic rotorcraft technologies & components
7. Technical Evaluator
Interfacing to the assessment of actual impact of selected technologies for rotorcraft
26
14. • Power plant
Reduced fuel • Loads & Flow Control
consumption (CO2 & • New Aircraft ConNigurations
NOx reduction) • Low weight
• Aircraft Energy Management
• Mission & Trajectory Management
• Power Plant
External noise • Mission & Trajectory Management
reduction • ConNigurations
• Rotorcraft Noise Reduction
"Ecolonomic"
life cycle Aircraft Life Cycle
27
►Management of Aircraft Energy (MAE)
branch of SGO ITD encompasses all
aspects of on-board energy provision, Technology Development
storage, distribution and consumption
►MAE aims at developing electrical
system technologies and energy
management functions to reduce fuel
consumption and overall aircraft Electrical WIPS
Electrical Power Electrical Power Distribution
emissions through: Drive Systems and Management
• Development of all-electrical system
architectures and equipment
• Validation and maturation of electrical
technologies to TRL 6 by large scale
ground and flight demonstrations. Electrical Engine Start Thermal Management
Electrical ECS Equipment
and Power Generation
Ground Tests
Flight Demonstration
28
COPPER Test Rig at Hispano -Suiza PROVEN Test Rig at Airbus Flight Test Aircraft
15. ►Management of Trajectory and
Mission (MTM) branch of SGO ITD Technology Development
aims at reducing the environmental
impact in the way the aircraft manages
its trajectory either on ground or in flight
►Two main fields of research :
• Improve in-flight trajectories,
including overall missions profiles
• Reduce the need to use main engines
during taxiing operations Green FMS Robustness to Weather Electrical taxiing
T/O Climb Cruise Descent Approach
Noise
NOx
Contrails
SESAR
CO2
Fuel
29
Multi-criteria optimisation
6 EcoDesign
• Power Plant
Reduced fuel • Loads & Flow Control
consumption (CO2 & • New Aircraft ConNigurations
NOx reduction) • Low Weight
• Aircraft Energy Management
• Mission & Trajectory Management
• Power Plant
External noise • Mission & Trajectory Management
reduction • ConNigurations
• Rotorcraft Noise Reduction
"Ecolonomic"
life cycle • Aircraft Life Cycle
30
16. EcoDesign
LifeCycle Modelling and Simulation
Eco-Design for Airframe (EDA) main objective Eco-Design for Systems (EDS) main objective
To design airframes for decreasing inputs, outputs and To design architectures of a/c systems, towards the
nuisances during A/C design & production and withdrawal more/all electrical a/c, with the objective of reducing
phases use of non-renewable and noxious fluids/materials
Modelling
31
EcoDesign
32
17. ws
ws
&
&
flo
flo
cts
cts
Current technology
pa
pa
Aircraft (Reference)
im
im
Without
Clean
Sky
2000 2020 / 2020+ forecast Deltas
(incl. SESAR)
Promising
technologies
from ITDs
Generic fleet
With inserted into traffic
Clean List of Clean Sky
Sky Conceptual Aircraft
Performances
Performances of
of technologies aircraft Environment impacts
33