O slideshow foi denunciado.
Utilizamos seu perfil e dados de atividades no LinkedIn para personalizar e exibir anúncios mais relevantes. Altere suas preferências de anúncios quando desejar.

OSSEU18: NVDIMM and Virtualization - George Dunlap, Citrix

169 visualizações

Publicada em

NVDIMM is a standard for allowing non-volatile memory to be exposed to as normal RAM, which can be directly mapped to guests. This simple concept has the potential to dramatically change the way software is written; but also has a number of surprising problems to solve. Furthermore, this area is plagued with incomplete specifications and confusing terminology.

This talk will attempt to give an overview of NVDIMMs from an operating system perspective: What the terminology means, how they are discovered and partitioned, issues relating to filesystems, a brief description of the functionality available in Linux, and so on. It will then describe the various issues and design choices a Xen system has to make in order to allow Xen systems to use NVDIMMs effectively.

Publicada em: Tecnologia
  • Seja o primeiro a comentar

  • Seja a primeira pessoa a gostar disto

OSSEU18: NVDIMM and Virtualization - George Dunlap, Citrix

  1. 1. NVDIMM Overview Technology, Linux, and Xen
  2. 2. Who am I?
  3. 3. What are NVDIMMs? • A standard for allowing NVRAM to be exposed as normal memory • Potential to dramatically change the way software is written
  4. 4. But.. • They have a number of surprising problems to solve • Incomplete specifications and confusing terminology
  5. 5. Goals • Give an overview of NVDIMM concepts, terminology, and architecture • Introduce some of the issues they bring up WRT operating systems • Introduce some of the issues faced wrt XEN
  6. 6. Caveats • I’m not an expert • (So some of this information may be not be 100%) • The situation is still developing • (so some of this information may be outdated)
  7. 7. Current Technology • Currently available: NVDIMM-N • DRAM with flash + capacitor backup • Strictly more expensive than a normal DIMM with the same storage capacity
  8. 8. Coming soon: Terabytes • Almost as cheap as disk • Almost as fast as DRAM
  9. 9. Page Tables SPA Terminology • Physical DIMM • DPA: DIMM Physical Address • SPA: System Physical Address DPA 0 DPA $N
  10. 10. SPA DPA 0 DPA $N • DRAM-like access • 1-1 Mapping between DPA and SPA • Interleaved across DIMMs • Similar to RAID-0 • Better performance • Worse reliability PMEM: RAM-like access
  11. 11. PBLK: Disk-like access • Disk-like access • Control region • 8k Data “window” • One window per NVDIMM device • Never interleaved • Useful for software RAID • Also useful when SPA space < NVRAM size • 48 address bits (256TiB) • 39 physical bits (0.5 TiB) SPA DPA 0 DPA $N
  12. 12. How is this mapping set up? • Firmware sets up the mapping at boot • May be modifiable using BIOS / vendor-specific tool • Exposes information via ACPI
  13. 13. ACPI: Devices • NVDIMM Root Device • Expect one per system • NVDIMM Device • One per NVDIMM • Information about size, manufacture, &c
  14. 14. ACPI: NFIT Table • NVDIMM Firmware Interface Table • PMEM information: • SPA ranges • Interleave sets • PBLK information • Control regions • Data window regions
  15. 15. Practical issues for using NVDIMM • How to partition up the NVRAM and share it between operating systems • Knowing the correct way to access each area (PMEM / PBLK) • Detecting when interleaving / layout has changed
  16. 16. Dividing things up: Namespaces • “Namespace”: Think partition • PMEM namespace and interleave sets • PBLK namespaces • “Type UUID” to define how it’s used • think DOS partitions: “Linux ext2/3/4”, “Linux Swap”, “NTFS”, &c
  17. 17. How do we store namespace information? • Reading via PMEM and PBLK will give you different results • PMEM Interleave sets may change across reboots • So we can’t store it inside the visible NVRAM
  18. 18. Label area: Per-NVDIMM storage • One “label area” per NVDIMM device (aka physical DIMM) • Label describes a single contiguous DPA region • Namespaces made out of labels • Accessed via ACPI AML methods • Pure read / write NVRAM Label Areas
  19. 19. • Read ACPI NFIT to determine • How many NVDIMMs you have • Where PMEM is mapped • Read label area for each NVDIMM • Piece together the namespace described • Double-check interleave sets with the interleave sets (from NFIT table) • Access PMEM regions by offsets in SPA sets (from NFIT table) • Access PBLK regions by programming control / data windows (from NFIT table) SPA How an OS Determines Namespaces Label Areas
  20. 20. Key points • “Namespace”: Partition • “Label area”: Partition table • NVDIMM devices / SPA ranges / etc defined in ACPI static NFIT table • Label area accessed via ACPI AML methods
  21. 21. NVDIMMs in Linux
  22. 22. ndctl • Create / destroy namespaces • Four modes • raw • sector • fsdax • devdax
  23. 23. The ideal interface • Guest processes map a normal file, and magically get permanent storage
  24. 24. The obvious solution • Make a namespace into a block device • Put a filesystem on it • Have mmap() map a file to the NVRAM memory directly
  25. 25. Issue: Sector write atomicity • Disk sector writes are atomic: all-or-nothing • memcpy() can be interrupted in the middle • Block Translation Table (BTT): an abstraction that guarantees write atomicity • ‘sector mode’ • But this means mmap() needs a separate buffer
  26. 26. Issue: Page struct • To keep track of userspace mappings, Linux needs a ‘page struct’ • 64 bytes per 4k page • 1 TiB of PMEM requires 7.85GiB of page array • Solution: Use PMEM to store a ‘page struct’ • Use a superblock to designate areas of the namespace to be used for this purpose (allocated on namespace creation)
  27. 27. Issue: Filesystems and block location • Filesystems want to be able to move blocks around • Difficult interactions between write() system call (DMA)
  28. 28. Issue: Interactions with the page cache
  29. 29. Mode summary: Raw • Block mode access to full SPA range • No support for namespaces • Therefore, no UUIDs / superblocks; page structs must be stored in main memory • Supports DAX
  30. 30. Mode summary: Sector • Block mode with BTT for sector atomicity • Supports namespaces • No DAX / direct mmap() support
  31. 31. Mode summary: fsdax • Block mode access to a namespace • Supports page structs in main memory, or in the namespace • Must be chosen at time of namespace creation • Supports filesystems with DAX • But there’s some question about the safety of this
  32. 32. Mode summary: devdax • Character device access to namespace • Does not support filesystems • page structs must be contained within the namespace • Supports mmap() • “No interaction with kernel page cache” • Character devices don’t have a “size”, so you have to remember
  33. 33. Summary • Four ways of mapping with different advantages and disadvantages • Seems clear that Linux is still figuring out how best use PMEM
  34. 34. NVDIMM, Xen, and dom0
  35. 35. Issue: Xen and AML • Reading the label areas can only be done via AML • Xen cannot do AML • ACPI spec requires only a single entity to do AML • That must be domain 0
  36. 36. Issue: struct page • In order to track mapping to guests, the hypervisor needs a struct page • “frametable” • 32 or 40 bits
  37. 37. Issue: RAM vs MMIO • Dom0 is free to map any SPA • RAM: Page reference counts taken • MMIO: No reference counts taken • Want to ref-count dom0 mappings to be sure we can safely pass PMEM to untrusted guests
  38. 38. Circular dependency • To do refcounting, we need page structs • To do page structs we need some ‘scratch’ area of PMEM • To know where namespaces are we need AML • To interpret a superblock dom0 needs to map it • To map it, we want refcounts…
  39. 39. Simple solution • Allocate a full namespace just for Xen • Have dom0 read the label areas and pass the namespace range to Xen before accessing any PMEM ranges (enforced by Xen)
  40. 40. Questions?