Introduction to the 3 d print & scan workshop on the digital days at ucn
1. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
Welcome to the 3D scan & print workshop
• Examples of the 3D printing technology mostly concerning
buildings
• Examples of the 3D technology in other areas
• Local 3D-developers visiting on The Digital Days
• Some useful programs for the workshop
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
2. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
ESA building a lunar base with 3D printing
ESA = The European Space Agency
Lunar Base Design
http://www.esa.int/Our_Activities/Technology/Building_a_lunar_base_with_3D_
printing
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
3. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
Working on the lunar base
http://inhabitat.com/foster-partners-unveil-plans-
for-3d-printed-moon-
base/foster_partners_lunar_base2/?extend=1
http://www.fosterandpartners.com/news/foster-+-partners-works-with-european-space-agency-to-3d-
print-structures-on-the-moon/
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
4. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
The ‛paper material‛ for ESA`s 3D-printed lunar base
‚The UK’s Monolite supplied the D-Shape printer for ESA's 3D-printed lunar base study, with a mobile printing array of
nozzles on a 6 m frame to spray a binding solution onto a sand-like building material.
3D ‘printouts’ are built up layer by layer – the company more typically uses its printer to create sculptures and is
working on artificial coral reefs to help preserve beaches from energetic sea waves. First the simulated lunar material
with magnesium oxide – turning it into ‘paper’ to print with. Then for structural ‘ink’ a binding salt is applied which
converts material to a stone-like solid.‛
http://spaceinimages.esa.int/Images/2013/01/D-Shape_printer
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
5. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D printed Protohouse
Softkill Design, an english architecture team, has entered the race of creating and building the first 3D
printed house
http://www.gizmag.com/softkill-3d-printed-house/26305/
http://www.softkilldesign.com/project/
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
6. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
The Canal House
‛The Canal House‛ from DUS Architects in Amsterdam. They intend to print it ‛on site‛, and are planning to print the
first facades and rooms in this year 2013,
http://inhabitat.com/dus-architects-plan-to-3d-print-an-entire-canal-house-for-amsterdam/
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
7. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
The Canal House and the KamerMaker
Video about KamerMaker http://vimeo.com/36027546#
To develop their 3D printed Canal House DUS Architects has invented their
own 3D printer, which is 6 meter tall and called KamerMaker
http://www.dusarchitects.com/news.php?newsid=168
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
8. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
The Landscape House
‛The Landscape House‛, A twisted loopy 3D-printed building by the dutch architect Janjaap Ruijssenaar to
be finished building in 2014
http://news.cnet.com/8301-11386_3-57565073-76/3d-printer-to-carve-out-worlds-first-full-size-building/
http://www.3ders.org/articles/20130115-dutch-architect-to-build-endless-house-with-3d-printer.html
http://www.dezeen.com/2013/01/24/3d-printed-house-interview/
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
9. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D eco-system
Paul Brody, CEO at IBM, see the 3D-printing, Intelligent Robotics and Open Source Electronics as three
Technologies that will transform manufacturing and as an eco-system of open source software, 3D scanners,
crowdfunding and material-technology which will challenge the production industry and course a rapid need for
change:
http://ing.dk/artikel/ibm-3d-print-kan-aendre-hele-produktionsindustrien-157337
See his slideshow here :http://www.slideshare.net/pbrody/the-software-defined-supply-chain
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
10. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D print technology in other areas
3D-printing on nano level
http://ing.dk/artikel/lasershow-booster-3d-
printere-print-et-mikro-rumskib-paa-under-et-
minut-157343
3D print = The next industrial revolution
http://ing.dk/artikel/fremtidsforsker-3d-print-
bliver-den-tredje-industrielle-revolution-134489
3D-printed headphones
http://3dprintingindustry.com/2012/10/15/3d-printable-
headphone-design-experiment/
3D-printed dresses you cant sew
http://ing.dk/artikel/3d-printede-skorter-pa-catwalken-i-paris-135801
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
11. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D measure, scan & print company(visiting)
How to scan:
http://www.youtube.com/watch?v=8wAMZo9lFrg
http://www.kvejborg.dk/
Measurement:
http://www.youtube.com/watch?v=QZ2p8xIblAA
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
12. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D-print- and printermaking company(visiting)
www.thy3d.dk
Build-your-own-printer-kits
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
13. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D modelling apps
A free 3D modelling program: http://www.123dapp.com/
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
14. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D modelling apps
http://www.123dapp.com/make
http://www.youtube.com/watch?feature
=player_embedded&v=jo5TxtKLmjM
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
15. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
3D modelling apps
http://www.youtube.com/watch?feature=
player_embedded&v=6aU2s85Zw3A
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
16. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
www.thingiverse.com
3D- & Robotic things and apps you can make
http://www.thingiverse.com/
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk
17. Introduction to the 3D Scan & Print Workshop on the Digital Days at UCN
Instructables.com
Go to the 123Dgroup at instructables.com for help and
inspiration
http://www.instructables.com/group/123d/
http://www.instructables.com/id/One-Washing-
Machine-Selector-Knob-to-end-all-Washi/
http://www.instructables.com/id/A-fully-3D-printable-GlaDOS-
Robotic-ceiling-arm-la/
That`s all for now.
Have a nice workshop on The Digital Days
April 2013 - Ulla lunde Ringtved - ulr@ucn.dk . ulr@hum.aau.dk