So einfach geht modernes Roaming fuer Notes und Nomad.pdf
New haz com presentation
1. Hazard Communication System
◦ OSHA estimates:
7 million workplaces
100 million employees
945,000 hazardous chemical products
2. All employees will be trained in the safe
use of all chemicals used in the
workplace!
This training will be refreshed on a yearly
basis or when a new
Chemical or process is introduced
9/18/2013jars inc.
3. sds sheets will be kept in the store or on line
for all chemicals used in our operation and
updated on a regular basis to satisfy the
employees’ right to know
Retraining will take place when a new
chemical or procedure is introduced
any questions as to interpretation of sds
sheets may be directed to the safety manager
An inventory shall be supplied upon request
9/18/2013jars inc.
4. No new chemicals will be introduced into the
operation without an safety data sheet and
not without approval of the operator/ safety
manager.
Use of consumer style products is highly
discouraged and may be construed as a
violation of safety standards according to
usage
9/18/2013jars inc.
5. Chemicals shall kept in their original
container or properly labeled spray bottle.
Read the label before use make sure the
chemical is designed for the task at hand.
Any non-routine task will require a special
training session by a qualified person.
9/18/2013jars inc.
6. Check labels for any personal protective
equipment needed!
The use of unlabeled spray bottles is
PROHIBITED!
labels will not be removed or defaced
9/18/2013jars inc.
7. All chemicals shall be stored in a designated
place away from food prep areas ,intense
heat sources food containers or open flames.
sds sheets for fire extinguishers and
compressed gases will be kept at the main
office.
9/18/2013jars inc.
8. DO NOT MIX ANY TWO CHEMICALS
TOGETHER. THE RESULTS CAN BE DEADLY!!
9/18/2013jars inc.
13. Signal Words
◦ The words “Danger” and “Warning” are being used as
signal words to emphasize the hazard and indicate the
relative level of the severity of the hazard as assigned by
a GHS hazard class and category
Danger – For more “severe” hazards
Warning – For less “severe” hazards
14. Examples of GHS Pictograms
Information from
the Globally
Harmonized
System (GHS)
/Purple Book
15. Hazard & Precautionary Statements
◦ Hazard statements have been standardized and given
phrases that describe the hazard(s) as found in the
hazard classification
◦ If there is more than one hazard, then the appropriate
hazard statement should be included for all identified
hazards
18. Safety Data Sheets
◦ Under GHS, (Material) Safety Data Sheets (SDS) will
be in a common format for all materials which
require a SDS
◦ The format is intended to provide an easier to read
document and allow for quicker identification of
hazards and dangers of a product
◦ The SDS should contain 16 headings and is derived
as a combination of document formats from
ISO – International Organization of Standardization
EU – European Union
ANSI – American National Standards Institute
19. Safety Data Sheets
◦ The minimum recommended information includes:
Section 1 – Identification of the substance or mixture and the
supplier
GHS Product Identifier
Recommended uses
Supplier details (address, phone number)
Emergency phone numbers
Section 2 – Hazard identification
GHS classification of the substance/mixture
GHS label elements (precautionary statements, hazard
symbols)
Other hazards not classified by GHS (ie dust explosion
hazard)
20. Safety Data Sheets
◦ The minimum recommended information includes:
Section 3 – Composition / Ingredients
Chemical Identity – common name, synonyms, CAS
number, impurities/stablizers, concentrations or
concentration ranges
Section 4 – First Aid
First aid measures based on the different routes of
exposure, most important symptoms/effects, indication of
immediate medical attention if necessary
Section 5 – Firefighting
Suitable / unsuitable extinguishing media
Special protective equipment and precautions for
firefighters
21. Safety Data Sheets
◦ The minimum recommended information includes:
Section 6 – Accidental Release
Personal precautions, environmental precautions and
containment / cleanup materials and methods
Section 7 – Handling and Storage
Precautions for safe handling
Conditions for safe storage
Section 8 - Exposure controls
Control parameters, engineering controls and individual
protective measures – PPE
22. Safety Data Sheets
◦ The minimum recommended information includes:
Section 9 – Physical / Chemical Properties
Properties about the material (e.g.
state, appearance, odor, pH, flash point, vapor
density, etc)
Section 10 – Stability / Reactivity
Chemical stability, reaction possibilities, conditions to
avoid, incompatibilities, decomposition products
Section 11 – Toxicological Information
Likely routes of exposure
Symptoms associated with physical, chemical and
toxicological characteristics
Numerical measures of toxicity
23. Safety Data Sheets
◦ The minimum recommended information includes:
Section 12 – Ecological Information
Aquatic / Soil Toxicity
Persistence and degradability
Bioaccumulation potential
Section 13 – Disposal
Recommended disposal methods
Section 14 – Transportation
UN Number, Proper Shipping Name, Hazard Class, Packing
Group
Marine Pollutant (Yes/No)
Special Precautions
24. Safety Data Sheets
◦ The minimum recommended information includes:
Section 15 – Regulatory Information
Regulatory bodies that govern the chemical / mixtures
(e.g. SARA, TCSC, FIFRA)
Section 16 – Other Information
Preparation and revisions on SDS should be in this section
25. Safety Data Sheets
◦ With uniform data fields and common
terminology, information can easily be found on the
sheets
◦ Worker understanding of the dangers will also be easier
to define
26. Training
◦ Under the current hazard communication
system, employers are required to train employees
on the hazard associated with products
◦ Right-to-Know stations must be provided
◦ GHS does not change this requirement and stresses
the importance of training for employees
◦ The GHS harmonization with labels / SDS
/terminology is intended to make training easier for
all
27. GHS Reference
◦ A Guide to The Globally Harmonized System of
Classification and Labeling of Chemicals (GHS)
http://www.osha.gov/dsg/hazcom/ghsguideoct05.pdf
29. Hazard Class Hazard Category
Explosives Unstable
Explosives
Div 1.1 Div 1.2 Div 1.3 Div 1.4 Div 1.5 Div 1.6
Flammable Gases 1 2
Flammable Aerosols 1 2
Oxidizing Gases 1
Gases under Pressure
Compressed Gases
Liquefied Gases
Refrigerated Liquefied Gases
Dissolved Gases
1
Flammable Liquids 1 2 3 4
Self-Reactive Chemicals Type A Type B Type C Type D Type E Type F Type G
Pyrophoric Liquids 1
Pyrophoric Solid 1
Pyrophoric Gases Single
category
Self-heating Chemicals 1 2
Chemicals, which in
contact with water, emit
flammable gases
1 2 3
Oxidizing Liquids 1 2 3
Oxidizing Solids 1 2 3
Organic Peroxides Type A Type B Type C Type D Type E Type F Type G
Corrosive to Metals 1
Combustible Dusts Single
Category
34. Employers are responsible for maintaining the labels
on the containers, including, but not limited
to, tanks, totes, drums, and for training their
employees on the hazards listed on the labels in
the workplace.
Labels must continue to be:
legible
contain the pertinent information (such as the
hazards and directions for use)
not able to be defaced, (i.e., fade, get washed
off,) or removed in any way as stated in revised
Hazard Communication Standard, 29
CFR 1910.1200(f)(9)
35. FLAMMABLE LIQUIDS
(Classified in Accordance with Appendix B.6)
Pictogram
Flame
Hazard
category
Signal
word
Hazard statement
1 Danger Extremely flammable
liquid and vapor
2 Danger Highly flammable
liquid and vapor
3 Warning Flammable liquid and
vapor
Pictogram
No Pictogram
Hazard
category
Signal
word
Hazard statement
4 Warning Combustible liquid
36. Effective Completion Date
Requirement's) Who
December 1, 2013 Train employees on the new label
elements and safety data sheet (SDS)
format.
Employers
June 1, 2015*
December 1, 2015
Compliance with all modified
provisions of this final rule, except:
The Distributor shall not ship
containers labeled by the chemical
manufacturer or importer unless it is a
GHS label
Chemical manufacturers, importers,
distributors and employers
June 1, 2016 Update alternative workplace labeling
and hazard communication program
as necessary, and provide additional
employee training for newly identified
physical or health hazards.
Employers
Transition Period to the effective
completion dates noted above
May comply with either 29 CFR
1910.1200 (the final standard), or the
current standard, or both
Chemical manufacturers, importers,
distributors, and employers
37. After viewing this presentation please sign
and date the documentation sheet which
will be kept in your file.
Thanks ,and work safely!!
9/18/2013jars inc.
38. Questions? Call me
740 353 0990
Tony Layne
if this is presented in a written form please
sign the following slide
This table shows the hazard classes and categories OSHA adopted in its final rule.As with health hazards, OSHA tried to maintain the scope of Haz Com 1994 for physical hazards in Haz Com 2012. Therefore, you will notice this list also includes pyrophoric gases and combustible dusts. The definition for pyrophoric gas is contained in paragraph (c) and the label elements are presented in Appendix C.For combustible dust, we are treating as we always have. The definition for this hazard is provided in the Combustible Dust NEP (Directive CPL 03-000-008). Guidance on this hazard is provided using existing documents, including those on OSHA’s webpage. In addition there are a number of voluntary consensus standards (particularly those from NFPA) that address combustible dust.Deana will now talk about the hazard communication program and labels.
In the final rule OSHA decided not to phase in compliance based on whether a product is a substance or a mixture. OSHA concluded that adequate information is available for classifiers to use to classify substances and mixtures.Therefore, under the revised standard, covered employers must complete all training regarding the new label elements and SDS format by December 1, 2013 since, employees will begin seeing the new style labels considerably earlier than the compliance date for labeling. All other provisions to be in effect by June 1, 2015, except: Distributors who are passing on manufacturer labels to customers shall ensure all labels are updated by December 1, 2015 ( these distributors have an extra six months) IF distributors are not passing along manufacturer labels they MUST comply with the June 1, 2015 date for labels.Employers will also be given an additional year (by June 1, 2016) to update their hazard communication programs or any other workplace signs, if applicable.You may be curious about, or get asked “Why did OSHA pick June 1, 2015 for an effective date for labels?” This is because it coincides with the EU date for classifying mixtures.