1. 1
NANO TECHNOLOGY
Nanotechnology (sometimes shortened to "nanotech") is the manipulation of matter on an
atomic, molecular, and supramolecular scale.
The earliest, widespread description of nanotechnology referred to the particular
technological goal of precisely manipulating atoms and molecules for fabrication of
macroscale products, also now referred to as molecular nanotechnology. A more generalized
description of nanotechnology was subsequently established by the National Nanotechnology
Initiative, which defines nanotechnology as the manipulation of matter with at least one
dimension sized from 1 to 100 nanometers.
Nanoparticle
Nanoparticles, are between 1 and 100 nanometers in size. Nanoparticles may or may not
exhibit size-related properties that differ significantly from those observed in fine particles or
bulk materials. Although the size of most molecules would fit into the above outline,
individual molecules are usually not referred to as nanoparticles.
Although, in general, nanoparticles are considered a discovery of modern science, they
actually have a very long history. Nanoparticles were used by artisans as far back as the ninth
century in Mesopotamia for generating a glittering effect on the surface of pots. Even these
days, pottery from the Middle Ages and Renaissance often retain a distinct gold- or copper-
colored metallic glitter. This luster is caused by a metallic film that was applied to the
transparent surface of a glazing. The luster can still be visible if the film has resisted
atmospheric oxidation and other weathering.
Properties
Nanoparticles are of great scientific interest as they are, in effect, a bridge between bulk
materials and atomic or molecular structures. A bulk material should have constant physical
properties regardless of its size, but at the nano-scale size-dependent properties are often
observed. Thus, the properties of materials change as their size approaches the nanoscale and
as the percentage of atoms at the surface of a material becomes significant. For bulk materials
larger than one micrometer (or micron), the percentage of atoms at the surface is insignificant
in relation to the number of atoms in the bulk of the material. The interesting and sometimes
unexpected properties of nanoparticles are therefore largely due to the large surface area of
the material, which dominates the contributions made by the small bulk of the material.
Other size-dependent property changes include quantum confinement in
semiconductor particles, surface plasmon resonance[10]
in some metal particles and
superparamagnetism in magnetic materials. What would appear ironic is that the changes in
physical properties are not always desirable. Ferromagnetic materials smaller than 10 nm can
switch their magnetisation direction using room temperature thermal energy, thus making
them unsuitable for memory storage.
The high surface area to volume ratio of nanoparticles provides a tremendous driving
force for diffusion, especially at elevated temperatures. Sintering can take place at lower
temperatures, over shorter time scales than for larger particles. In theory, this does not affect
the density of the final product, though flow difficulties and the tendency of nanoparticles to
agglomerate complicates matters. Moreover, nanoparticles have been found to impart some
extra properties to various day to day products. For example, the presence of titanium dioxide
nanoparticles imparts what we call the self-cleaning effect, and, the size being nano-range, the
particles cannot be observed. Zinc oxide particles have been found to have superior UV
blocking properties compared to its bulk substitute. This is one of the reasons why it is often
used in the preparation of sunscreen lotions,[33]
and is completely photostable.
2. 2
Optical Properties
Nanoparticles often possess unexpected optical properties as they are small enough to confine
their electrons and produce quantum effects. For example gold nanoparticles appear deep-red
to black in solution. Nanoparticles of yellow gold and grey silicon are red in color. Gold
nanoparticles melt at much lower temperatures (~300 °C for 2.5 nm size) than the gold slabs
(1064 °C);. Absorption of solar radiation is much higher in materials composed of
nanoparticles than it is in thin films of continuous sheets of material. In both solar PV and
solar thermal applications, controlling the size, shape, and material of the particles, it is
possible to control solar absorption
Synthesis
There are several methods for creating nanoparticles, including both attrition and pyrolysis. In
attrition, macro- or micro-scale particles are ground in a ball mill, a planetary ball mill, or
other size-reducing mechanism. The resulting particles are air classified to recover
nanoparticles. In pyrolysis, a vaporous precursor (liquid or gas) is forced through an orifice at
high pressure and burned. The resulting solid (a version of soot) is air classified to recover
oxide particles from by-product gases. Pyrolysis often results in aggregates and agglomerates
rather than single primary particles.
THERMAL PLASMA
A thermal plasma can also deliver the energy necessary to cause vaporization of small
micrometer-size particles. The thermal plasma temperatures are in the order of 10,000 K, so
that solid powder easily evaporates. Nanoparticles are formed upon cooling while exiting the
plasma region. The main types of the thermal plasma torches used to produce nanoparticles
are dc plasma jet, dc arc plasma, and radio frequency (RF) induction plasmas. In the arc
plasma reactors, the energy necessary for evaporation and reaction is provided by an electric
arc formed between the anode and the cathode. For example, silica sand can be vaporized
with an arc plasma at atmospheric pressure. The resulting mixture of plasma gas and silica
vapour can be rapidly cooled by quenching with oxygen, thus ensuring the quality of the
fumed silica produced.
RF INDUCTION PLASMA
In RF induction plasma torches, energy coupling to the plasma is accomplished through the
electromagnetic field generated by the induction coil. The plasma gas does not come in
contact with electrodes, thus eliminating possible sources of contamination and allowing the
operation of such plasma torches with a wide range of gases including inert, reducing,
oxidizing, and other corrosive atmospheres. The working frequency is typically between
200 kHz and 40 MHz. Laboratory units run at power levels in the order of 30–50 kW,
whereas the large-scale industrial units have been tested at power levels up to 1 MW. As the
residence time of the injected feed droplets in the plasma is very short, it is important that the
droplet sizes are small enough in order to obtain complete evaporation. The RF plasma
method has been used to synthesize different nanoparticle materials, for example synthesis of
various ceramic nanoparticles such as oxides, carbours/carbides, and nitrides of Ti and Si (see
Induction plasma technology).
INERT-GAS CONDENSATION
Inert-gas condensation is frequently used to make nanoparticles from metals with low melting
points. The metal is vaporized in a vacuum chamber and then supercooled with an inert gas
stream. The supercooled metal vapor condenses into nanometer-size particles, which can be
entrained in the inert gas stream and deposited on a substrate or studied in situ.
3. 3
RADIATION CHEMISTRY.
Nanoparticles can also be formed using radiation chemistry. Radiolysis from gamma rays can
create strongly active free radicals in solution. This relatively simple technique uses a
minimum number of chemicals. These including water, a soluble metallic salt, a radical
scavenger (often a secondary alcohol), and a surfactant (organic capping agent). High gamma
doses on the order of 104
Gray are required. In this process, reducing radicals will drop
metallic ions down to the zero-valence state. A scavenger chemical will preferentially interact
with oxidizing radicals to prevent the re-oxidation of the metal. Once in the zero-valence
state, metal atoms begin to coalesce into particles. A chemical surfactant surrounds the
particle during formation and regulates its growth. In sufficient concentrations, the surfactant
molecules stay attached to the particle. This prevents it from dissociating or forming clusters
with other particles. Formation of nanoparticles using the radiolysis method allows for
tailoring of particle size and shape by adjusting precursor concentrations and gamma dose
Sol-gel
Typical precursors are metal alkoxides and metal chlorides, which undergo hydrolysis and
polycondensation reactions to form either a network "elastic solid" or a colloidal suspension
(or dispersion) – a system composed of discrete (often amorphous) submicrometer particles
dispersed to various degrees in a host fluid. Formation of a metal oxide involves connecting
the metal centers with oxo (M-O-M) or hydroxo (M-OH-M) bridges, therefore generating
metal-oxo or metal-hydroxo polymers in solution. Thus, the sol evolves toward the formation
of a gel-like diphasic system containing both a liquid phase and solid phase whose
morphologies range from discrete particles to continuous polymer networks.[38]
In the case of the colloid, the volume fraction of particles (or particle density) may be so low
that a significant amount of fluid may need to be removed initially for the gel-like properties
to be recognized. This can be accomplished in any number of ways. The most simple method
is to allow time for sedimentation to occur, and then pour off the remaining liquid.
Centrifugation can also be used to accelerate the process of phase separation.
Removal of the remaining liquid (solvent) phase requires a drying process, which is typically
accompanied by a significant amount of shrinkage and densification. The rate at which the
solvent can be removed is ultimately determined by the distribution of porosity in the gel. The
ultimate microstructure of the final component will clearly be strongly influenced by changes
implemented during this phase of processing. Afterward, a thermal treatment, or firing
process, is often necessary in order to favor further polycondensation and enhance mechanical
properties and structural stability via final sintering, densification, and grain growth. One of
the distinct advantages of using this methodology as opposed to the more traditional
processing techniques is that densification is often achieved at a much lower temperature.
Characterization
Nanoparticle characterization is necessary to establish understanding and control of
nanoparticle synthesis and applications. Characterization is done by using a variety of
different techniques, mainly drawn from materials science. Common techniques are electron
microscopy (TEM, SEM), atomic force microscopy (AFM), dynamic light scattering (DLS),
x-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (XRD), Fourier transform
infrared spectroscopy (FTIR), matrix-assisted laser desorption/ionization time-of-flight mass
spectrometry (MALDI-TOF), ultraviolet-visible spectroscopy, dual polarisation
interferometry and nuclear magnetic resonance (NMR).
4. 4
Bottom-up approaches
These seek to arrange smaller components into more complex assemblies.
DNA nanotechnology utilizes the specificity of Watson–Crick basepairing to
construct well-defined structures out of DNA and other nucleic acids.
Approaches from the field of "classical" chemical synthesis (inorganic and organic
synthesis) also aim at designing molecules with well-defined shape (e.g. bis-
peptides[30]
).
More generally, molecular self-assembly seeks to use concepts of supramolecular
chemistry, and molecular recognition in particular, to cause single-molecule
components to automatically arrange themselves into some useful conformation.
Atomic force microscope tips can be used as a nanoscale "write head" to deposit a
chemical upon a surface in a desired pattern in a process called dip pen
nanolithography. This technique fits into the larger subfield of nanolithography.
Top-down approaches
These seek to create smaller devices by using larger ones to direct their assembly.
Many technologies that descended from conventional solid-state silicon methods for
fabricating microprocessors are now capable of creating features smaller than
100 nm, falling under the definition of nanotechnology. Giant magnetoresistance-
based hard drives already on the market fit this description,[31]
as do atomic layer
deposition (ALD) techniques. Peter Grünberg and Albert Fert received the Nobel
Prize in Physics in 2007 for their discovery of Giant magnetoresistance and
contributions to the field of spintronics.[32]
Solid-state techniques can also be used to create devices known as
nanoelectromechanical systems or NEMS, which are related to
microelectromechanical systems or MEMS.
Focused ion beams can directly remove material, or even deposit material when
suitable pre-cursor gasses are applied at the same time. For example, this technique is
used routinely to create sub-100 nm sections of material for analysis in Transmission
electron microscopy.
Atomic force microscope tips can be used as a nanoscale "write head" to deposit a
resist, which is then followed by an etching process to remove material in a top-down
method.
Carbon nanotube
Carbon nanotubes (CNTs) are allotropes of carbon with a cylindrical nanostructure.
Nanotubes have been constructed with length-to-diameter ratio of up to 132,000,000:1,[1]
significantly larger than for any other material. These cylindrical carbon molecules have
unusual properties, which are valuable for nanotechnology, electronics, optics and other fields
of materials science and technology. In particular, owing to their extraordinary thermal
conductivity and mechanical and electrical properties, carbon nanotubes find applications as
additives to various structural materials. For instance, nanotubes form a tiny portion of the
material(s) in some (primarily carbon fiber) baseball bats, golf clubs, or car parts.[2]
Nanotubes are members of the fullerene structural family. Their name is derived from their
long, hollow structure with the walls formed by one-atom-thick sheets of carbon, called
graphene. These sheets are rolled at specific and discrete ("chiral") angles, and the
combination of the rolling angle and radius decides the nanotube properties; for example,
whether the individual nanotube shell is a metal or semiconductor. Nanotubes are categorized
as single-walled nanotubes (SWNTs) and multi-walled nanotubes (MWNTs). Individual
nanotubes naturally align themselves into "ropes" held together by van der Waals forces,
more specifically, pi-stacking.
5. 5
Terminology
There is no consensus on some terms describing carbon nanotubes in scientific literature: both
"-wall" and "-walled" are being used in combination with "single", "double", "triple" or
"multi", and the letter C is often omitted in the abbreviation; for example, multi-walled carbon
nanotube (MWNT).
Single-walled he translation vector is bent,
while the chiral vector stays
straight
Graphene nanoribbon
The chiral vector is bent,
while the translation vector
stays straight
Zigzag Chiral
Most single-walled nanotubes (SWNT) have a diameter of close to 1 nanometer, with
a tube length that can be many millions of times longer. The structure of a SWNT can be
conceptualized by wrapping a one-atom-thick layer of graphite called graphene into a
seamless cylinder. The way the graphene sheet is wrapped is represented by a pair of indices
(n,m). The integers n and m denote the number of unit vectors along two directions in the
honeycomb crystal lattice of graphene. If m = 0, the nanotubes are called zigzag nanotubes,
and if n = m, the nanotubes are called armchair nanotubes. Otherwise, they are called chiral.
SWNTs are an important variety of carbon nanotube because most of their properties
change significantly with the (n,m) values, and this dependence is non-monotonic (see
Kataura plot). In particular, their band gap can vary from zero to about 2 eV and their
electrical conductivity can show metallic or semiconducting behavior. Single-walled
nanotubes are likely candidates for miniaturizing electronics. The most basic building block
of these systems is the electric wire, and SWNTs with diameters of an order of a nanometer
can be excellent conductors.[3][4]
One useful application of SWNTs is in the development of
the first intermolecular field-effect transistors (FET). The first intermolecular logic gate using
SWCNT FETs was made in 2001.[5]
A logic gate requires both a p-FET and an n-FET.
Because SWNTs are p-FETs when exposed to oxygen and n-FETs otherwise, it is possible to
protect half of an SWNT from oxygen exposure, while exposing the other half to oxygen.
This results in a single SWNT that acts as a NOT logic gate with both p and n-type FETs
within the same molecule.+
Multi-walled
Multi-walled nanotubes (MWNT) consist of multiple rolled layers (concentric tubes)
of graphene. There are two models that can be used to describe the structures of multi-walled
6. 6
nanotubes. In the Russian Doll model, sheets of graphite are arranged in concentric cylinders,
e.g., a (0,8) single-walled nanotube (SWNT) within a larger (0,17) single-walled nanotube. In
the Parchment model, a single sheet of graphite is rolled in around itself, resembling a scroll
of parchment or a rolled newspaper. The interlayer distance in multi-walled nanotubes is close
to the distance between graphene layers in graphite, approximately 3.4 Å. The Russian Doll
structure is observed more commonly. Its individual shells can be described as SWNTs,
which can be metallic or semiconducting. Because of statistical probability and restrictions on
the relative diameters of the individual tubes, one of the shells, and thus the whole MWNT, is
usually a zero-gap metal.
Double-walled carbon nanotubes (DWNT) form a special class of nanotubes because
their morphology and properties are similar to those of SWNT but their resistance to
chemicals is significantly improved. This is especially important when functionalization is
required (this means grafting of chemical functions at the surface of the nanotubes) to add
new properties to the CNT. In the case of SWNT, covalent functionalization will break some
C=C double bonds, leaving "holes" in the structure on the nanotube and, thus, modifying both
its mechanical and electrical properties. In the case of DWNT, only the outer wall is modified.
DWNT synthesis on the gram-scale was first proposed in 2003[6]
by the CCVD technique,
from the selective reduction of oxide solutions in methane and hydrogen.
Fullerene
A fullerene is any molecule composed entirely of carbon, in the form of a hollow
sphere, ellipsoid, tube, and many other shapes. Spherical fullerenes are also called buckyballs,
and they resemble the balls used in football (soccer). Cylindrical ones are called carbon
nanotubes or buckytubes. Fullerenes are similar in structure to graphite, which is composed of
stacked graphene sheets of linked hexagonal rings; but they may also contain pentagonal (or
sometimes heptagonal) rings.[1]
The first fullerene molecule to be discovered, and the family's namesake,
buckminsterfullerene (C60), was prepared in 1985 by Richard Smalley, Robert Curl, James
Heath, Sean O'Brien, and Harold Kroto at Rice University. The name was a homage to
Buckminster Fuller, whose geodesic domes it resembles. The structure was also identified
some five years earlier by Sumio Iijima, from an electron microscope image, where it formed
the core of a "bucky onion."[2]
Fullerenes have since been found to occur in nature.[3]
More
recently, fullerenes have been detected in outer space.[4]
According to astronomer Letizia
Stanghellini, "It’s possible that buckyballs from outer space provided seeds for life on
Earth."[5]
The discovery of fullerenes greatly expanded the number of known carbon allotropes,
which until recently were limited to graphite, diamond, and amorphous carbon such as soot
and charcoal. Buckyballs and buckytubes have been the subject of intense research, both for
their unique chemistry and for their technological applications, especially in materials
science, electronics, and nanotechnology.
Buckminsterfullerene C60
7. 7
Types of fullerene
Since the discovery of fullerenes in 1985, structural variations on fullerenes have evolved
well beyond the individual clusters themselves. Examples include:[17]
Buckyball clusters: smallest member is C
20 (unsaturated version of dodecahedrane) and the most common is C
60;
Nanotubes: hollow tubes of very small dimensions, having single or multiple walls;
potential applications in electronics industry;
Megatubes: larger in diameter than nanotubes and prepared with walls of different
thickness; potentially used for the transport of a variety of molecules of different
sizes;[18]
polymers: chain, two-dimensional and three-dimensional polymers are formed under
high-pressure high-temperature conditions; single-strand polymers are formed using
the Atom Transfer Radical Addition Polymerization (ATRAP) route;[19]
nano"onions": spherical particles based on multiple carbon layers surrounding a
buckyball core; proposed for lubricants;[20]
linked "ball-and-chain" dimers: two buckyballs linked by a carbon chain;[21]
fullerene rings
Buckminsterfullerene
Buckminsterfullerene is the smallest fullerene molecule containing pentagonal and
hexagonal rings in which no two pentagons share an edge (which can be destabilizing, as in
pentalene). It is also the most common in terms of natural occurrence, as it can often be found
in soot. The structure of C60 is a truncated icosahedron, which resembles an association
football ball of the type made of twenty hexagons and twelve pentagons, with a carbon atom
at the vertices of each polygon and a bond along each polygon edge.