1.Melting Point Apparatus - It is usable to estimate the Melting Point of chemicals, Pharamaceuticals, Food Etc., This is very useful to determine the melting point if any subsatance. Max Temp. up to 3500C. Consist with aluminium cylindrical block for heating, Radial holes admits a thermometer and glass capillary. Temp. Controlled by energy regulator. Regulator fitted ti the unit and with high, low heat switch. 2. ESCR Apparatus- E.S.C.R. Apparatus is used for determination of suceptibility of ethylene plastics to environmental stress cracking when subjected to certain conditions. Bent specimens of the plastics each having a controlled imperfection on the surface are exposed to the action of a surface active agent, oils or detergent. The proportion of the total number of specimens that crack in a goven times is observed.

1. SHAMBHAVI LAB
INSTRUMENTS
Presentation on :
1.Melting Point Apparatus
2. ESCR Apparatus
Contact us : http://www.tensiletestingmachineutm.com

2. 1. Melting Point Apparatus
It is usable to estimate the Melting Point of
chemicals, Pharamaceuticals, Food Etc.,
This is very useful to determine the melting point if
any subsatance.
Max Temp. up to 3500C. Consist with aluminium
cylindrical block for heating, Radial holes admits a
thermometer and glass capillary.
Temp. Controlled by energy regulator.
Regulator fitted ti the unit and with high, low heat
switch.

3. 2.E.S.C.R. Apparatus.
E.S.C.R. Apparatus is used for determination of
suceptibility of ethylene plastics to environmental
stress cracking when subjected to certain conditions.
Bent specimens of the plastics each having a
controlled imperfection on the surface are exposed
to the action of a surface active agent, oils or
detergent. The proportion of the total number of
specimens that crack in a goven times is observed.

4. Specifications :
Specification Accessories
Insode bath is of S.s. and
outside bath
1 Blanking dle 1No.
is M.s. with heat insulation. 2 Nicking jig 1No.
The heating system is having
a RTD,
3 Bending cum
transfering device
1No.
Heater and digital temp.
Controller (PID)
4 Specimen holder 10Nos.
Max. Temperature 1500C 5 Test Tubes 10Nos.
Max. Temperature - R.T.,
Resolution = 0.100C
6 Corks 10Nos.
Accuracy = 0.500C

5. THANKYOU !
Contact us : http://www.tensiletestingmachineutm.com