A paving stone or brick made in any desired shape that can be used for pavements, building bricks or other purposes. these 'eco-friendly' paving bricks are cheaper than the classic model. Paving stones can be manufactured from waste plastics without requiring significant capital investment. The main component of the mixture can be made from plastic packaging (like bags and transparent films) and it is possible to mix other types of plastic waste in. The process is simple, melting the plastics down and mixing with sand. This mixture can then be moulded into any desired shape to produce paving tiles (such as for pavements) There are several steps to production. The plastic serves to bind the materials together. The plastic is then melted in a vat over a wood fire. You then add sand and mix it. Then, you pour the mix into a mould and let it dry for 15 minutes.

1. A THECHNICAL PRESENTATION
ON
“PLASTIC BRICKS”
By
Sk.M.Rahamath Shareef
1

2. INTRODUCTION
PREPERATION PROCESS
ADVANTAGES
DISADVANTAGES
FUTURE SCOPE
REFERENCES
CONTENTS
2

3.  plastic waste is increasing due to increase
in population, urbanization and
development
 The disposal of waste plastic has become
a serious problem globally due to their
non-biodegradability.
INTRODUCTION:
3

4. PREPERATION PROCESS:
Collecting the wasteplastic
Melting the mixture
Mixing
Moulding
Drying
4

5. COLLECTING THE WASTEPLASTIC:
 Bags and bottles
 Plastic covers
 Buy them from middle-men who collect 5

6. MELTING THE MIXTURE:
a simple drum(sheet metal )
safety equipment,
 including eye protection,
breathing apparatus, gloves,
6

7. MIXING:
Coarse Sand is added and mixed in up to
a smooth consistency .
7

8. MOULDING:
Metal moulds.
Different
shapes.
8

9. DRYING:
 Placed In The Sun To Dry For Up To 24 Hours.
9

10. THE TEAM WHO PREPARED “PLASTIC BRICKS”
10

11. Low Cost
Eco Friendly
High Strength
High Profit
Creating Jobs
ADVANTAGES:
11

12. Less fire resistant
Release of harm full gases at time of preparation
DISADVANTAGES:
12

13. FUTURE SCOPE:
Establishing the industries.
Increasing their strength by adding other material.
Recycling the plastic and using as a construction material.
Protection of environment.
13

14. PUBLISHED IN EENADU PAPER DATED:18-10-2016.
AN APPRECIATION FORM MEDIA & COLLEGE MANAGEMENT:
14

15. REFERENCES:
 Ch.Naga Siva Sai Nadh (Asst. Proff) Civil Dept. Mekapati
Rajamohan Reddy Institute of Technology & Science.
15

16. 16

17. 17