Diagnostico empresarial

798 visualizações

Publicada em

Apresentação teste

0 comentários
1 gostou
Estatísticas
Notas
  • Seja o primeiro a comentar

Sem downloads
Visualizações
Visualizações totais
798
No SlideShare
0
A partir de incorporações
0
Número de incorporações
1
Ações
Compartilhamentos
0
Downloads
40
Comentários
0
Gostaram
1
Incorporações 0
Nenhuma incorporação

Nenhuma nota no slide
  • Clear disk with floating text(Advanced)To reproduce the shape effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Press and hold SHIFT to constrain the shape to a circle, and then on the slide, drag to draw a circle. Select the circle. Under DrawingTools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.07”.In the Shape Width box, enter 4.54”.Under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, clickMore Fill Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 204, Green: 255, Blue: 153.Under Drawing Tools, on the Format tab, in the Shape Styles group, clickShape Outline, and then click No Outline. Under Drawing Tools, on the Format tab, in the Shape Styles group, clickShape Effects, and then do the following:Point to Bevel, and then under Bevel click Convex (second row, third option from the left). Point to 3-D Rotation, and then under Perspective click Perspective Relaxed (second row, third option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click 3-D Rotationin the left pane, and then do the following in the right pane under Rotation:In the Y box, enter 289.6°.In the Perspective box, enter 30°.Also in the Format Shape dialog box, click 3-D Formatin the left pane, and then do the following in the right pane:Under Bevel, click the button next to Bottom, and then under Bevel click Circle (first row, first option from the left). Under Depth, in the Depth box, enter 25 pt. Under Surface, click the button next to Material, and then under Translucent click Clear (third option from the left). Click the button next to Lighting, and then under Neutral click Balance (first row, second option from the left). Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the right pane:In the Transparency box, enter 85%.In the Size box, enter 100%. In the Blur box, enter 21 pt.In the Angle box, enter 90%.In the Distance box, enter 27 pt. To reproduce the text effects on this slide, do the following:On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box.Enter text in the text box, select the text, and then on the Home tab, in the Font group, select Gill Sans MT Condensedfrom the Font list, select 80 from the Font Size list, click the arrow next to Font Color,and then under Theme Colors click White, Background 1, Darker 50% (sixth row, first option from the left).On the Home tab, in the Paragraph group, click Center to center the text in the text box. Under Drawing Tools, on the Format tab, in the WordArt Styles group, click Text Effects, and then do the following:Point to Reflection, and then under Reflection Variations click Tight Reflection, 4 pt offset (second row, first option from the left). Point to 3-D Rotation, and then under Parallel click Off Axis 2 Left (second row, fourth option from the left). Under Drawing Tools, on the Format tab, in the bottom right corner of the WordArt Styles group, click the Format Text Effects dialog box launcher. In the Format Text Effects dialog box, click 3-D Format in the left pane, and then do the following in the right pane:Under Depth, click the button next to Color and under Theme Colorsthen click White, Background 1 (first row, first option from the left). In the Depth box, enter 6.5 pt. Under Surface, click the button next to Material and then under Standard click Warm Matte (second option from the left). Click the button next to Lighting, and then under Neutral click Soft (first row, third option from the left). To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then clickFormat Background.In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then clickLinear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter46%.Click the button next to Color, and then under Theme Colorsclick White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following:In the Stop position box, enter100%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 228, Green: 245, Blue: 193.
  • Custom animation effects: page turns in open book(Difficult)Tip: You will need to use drawing guides and the ruler to position the objects on this slide. For instructions on animating an opening book cover, refer to the previous slide (Custom animation effects: open book) for instructions.To display the drawing guides and the ruler, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.Right-click the slide background area, and then click Grid and Guides.In the Grid and Guides dialog box, underGuidesettings, select Display drawing guides on screen. (Note: One horizontal and one vertical guide will display on the slide at 0.00, the default position. The spine of the book will be aligned to the vertical drawing guide.) On the View tab, in the Show/Hide group, select Ruler. To reproduce the first shape in the Inside-left page 1 group on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Rectangles, click Rounded Rectangle (second option from the left). On the slide, drag to draw a rounded rectangle.Select the rounded rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.5”.In the Shape Width box, enter 3.33”.On the rounded rectangle, drag the yellow diamond adjustment handle to the left to reduce the amount of rounding on the corners.On the Home tab, in the bottom right corner of theDrawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).In the Angle box, enter 180°.Under Gradient stops, click Add or Remove until two stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Red, Accent 2, Darker 50% (sixth row, sixth option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickRed Accent 2, Darker 25% (fifth row, sixth option from the left).Also in the FormatShape dialog box, click LineColor in the left pane. In the LineColor pane, select Noline. On the slide, drag the rectangle until the right edge is against the vertical drawing guide.On the Home, tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.To reproduce the second shape in the Inside-left page 1 group on this slide, do the following:On the Home tab,in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left).On the slide, drag to draw a rectangle.Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.33”.In the Shape Width box, enter 3.15”.On the Home tab, in the bottom right corner of theDrawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).In the Angle box, enter 180°.Under Gradient stops, click Add or Remove until five stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, the first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 5%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 3 from the list, and then do the following: In the Stop position box, enter 18%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 5% (second row, first option from the left).Select Stop 4 from the list, and then do the following: In the Stop position box, enter 38%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 5 from the list, and then do the following: In the Stop position box, enter 93%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Also in the FormatShape dialog box, click LineColor in the left pane. In the LineColor pane, select Noline.Also in the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next toPresets, under Outer click OffsetRight (second row, first option from the left), and then do the following:In the Transparency box, enter 60%.In the Size box, enter 100%.In the Blur box, enter 4 pt.In the Angle box, enter 0°.In the Distance box, enter 3 pt.On the slide, drag the rectangle until the right edge is against the vertical drawing guide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.On the Home tab, in the Editing group, click Select and then click SelectAll.On the Home tab, in the Drawing group, click Arrange, and then click Group.On the Home tab, in the Editing group, click Select, and then click Selection Pane. In the Selection and Visibility pane, double-click the group to edit the name, and then enter Inside-left page 1. To reproduce the first shape in the Inside-right page 3group on this slide, do the following:On the SelectionandVisibility pane, select the Inside-left page 1group.On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click MoreRotationOptions. In the SizeandPosition dialog box, on the Size tab, under Sizeandrotation, in the Rotation box, enter 180°.On the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-right.On the slide, drag theInside-right group until the left edge is against the vertical drawing guide.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.To reproduce the text box in the Inside-right page 3group on this slide, do the following:On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, select Bodoni MT Condensed.In the Font Size list, select 16.Drag the text box onto the right-side page to the right of the vertical drawing guide. If the text is wider than the page, drag the adjustment handles on the text box to decrease the width, and then repeat the previous step to reposition. To reproduce the page edges in the Inside-right page 3group on this slide, do the following:On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line.Select the vertical line.Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 4.32”.Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow to the right of Shape Outline, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process until there is a total of six lines.On the slide, drag the lines until they are bunched together in a dense group, no wider than 0.5”. In the Selection and Visibility pane, press and hold CTRL, and then select the six straight connectors (lines).On the Home tab, in the Drawing group, click Arrange, andthen do the following:Point to Align, and then click Align Selected Objects. Point to Align, and then click Distribute Horizontally.Point to Align, and then click Align Middle.Click Group. On the slide, drag the group of lines until the right edge is touching the right edge of the white rectangle to the right of the vertical drawing guide.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.In the Selection and Visibility pane, press and hold CTRL, and then select the group of lines, the text box, and the Inside-right group.On the Home tab, in the Drawing group, click Arrange, and then click Group.In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right page 3.To reproduce the first shape in the Inside-left page 2group on this slide, do the following: On the Home tab,in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left).On the slide, drag to draw a rectangle.Under Drawing Tools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 4.33”.In the Shape Width box, enter 3.15”.On the Home tab, in the bottom right corner of theDrawing group, click the Format Shape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, select Gradientfill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Left (first row, fifth option from the left).In the Angle box, enter 180°.Under Gradient stops, click Add or Remove until five stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors clickWhite, Background 1, Darker 35% (fifth row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 5%.Click the button next to Color, and then under Theme Colors clickWhite, Background 1 (first row, first option from the left).Select Stop 3 from the list, and then do the following: In the Stop position box, enter 18%.Click the button next to Color, and then under Theme Colors clickWhite, Background 1, Darker 5% (second row, first option from the left).Select Stop 4 from the list, and then do the following: In the Stop position box, enter 38%.Click the button next to Color, and then under Theme Colors clickWhite, Background 1 (first row, first option from the left).Select Stop 5 from the list, and then do the following: In the Stop position box, enter 93%.Click the button next to Color, and then under Theme Colors clickWhite, Background 1 (first row, first option from the left).Also in the FormatShape dialog box, click LineColor in the left pane. In the LineColor pane, select Noline.Also in the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, click the button next to Presets, under Outer click OffsetRight (second row, first option from the left), and then do the following:In the Transparency box, enter 60%.In the Size box, enter 100%.In the Blur box, enter 4 pt.In the Angle box, enter 0°.In the Distance box, enter 3 pt.On the slide, drag the rectangle until the right edge is against the vertical drawing guide.On the Home tab, in the Drawing group, click the arrow under Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.To reproduce the page edge in the Inside-left page 2group on this slide, do the following: On the Home tab, in the Drawing group, click Shapes, and then under Lines click Line (first option from the left). On the slide, press and hold SHIFT, and then drag to draw a straight, vertical line.Select the vertical line.Under Drawing Tools, on the Format tab, in the Size group, in the Shape Width box, enter 4.32”.Under Drawing Tools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Outline, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).On the slide, drag the line near the edge of the left-side page (white rectangle to the left of the vertical drawing guide). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.In the Selection and Visibility pane, press and hold CTRL, and then select the rectangle and the straight connector (line).On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-left page 2.To reproduce the first shape in the Inside-right page 2group on this slide, do the following: In the Selection and Visibility pane, select the Inside-left page 2 group.On the Home tab, in the Clipboard group, click the arrow under Paste, and then clickDuplicate.With the duplicate group still selected, on the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.In the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-right.In the Selection and Visibility pane, select the new Inside-right group. On the slide, drag the selected group until the left edge is against the vertical drawing guide.On the Home, tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.ClickAlign Middle. On the Insert tab, in the Illustrations group, click Picture.In the InsertPicture dialog box, select a picture, and then click Insert.On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Sizeand Position dialog box launcher. Select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 1.4” and the Width box is set to 2.1”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the slide, drag the picture until the left edge is 0.5” to the right of the vertical drawing guide and the bottom edge is 0.5” above the horizontal drawing guide.To reproduce the text boxin the Inside-right page 2group on this slide, do the following: On the Insert tab, in the Text group, click Text Box. On the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, select Bodoni MT Condensed.In the Font Size list, select 16.On the slide, drag the text box untilthe left edge of the textis 0.5” to the right of the vertical drawing guide and the top edge of the text is against the horizontal drawing guide.If the text is too wide for the page, drag the adjustment handles on the text box to adjust the width, and then repeat the previous step to reposition. To reproduce the page edgesin the Inside-right page 2group on this slide, do the following: In the Selection and Visibility pane, select the Inside-right group you just created.On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.In the Selection and Visibility pane, select the straight connector (line) that you just ungrouped from the page.On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process for a total of six lines. On the slide, drag the six lines until they are bunched together in a dense group, no wider than 0.5”. In the Selection and Visibility pane, press and hold CTRL, and then select the six straight connectors (lines). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align Selected Objects.Click Distribute Horizontally.Click Align Middle. With the group of lines still selected, on the Home tab, in the Drawing group, click Arrange, and then clickGroup.On the slide, drag the group until the right edge of the group of lines is touching the right edge of the page.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines and the rectangle. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.Also in the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right.Also in the Selection and Visibility pane, press and hold CTRL, and then selectthe Inside-right group, the text box, and the picture.On the Home tab, in the Drawing group, click Arrange, and then click Group.In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right page 2.To reproduce the first shape in the Inside-left page 3 group, do the following: In the Selection and Visibility pane, select the Inside-left page 2 group.On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. In the Selection and Visibility pane, double-click the duplicate group to edit the name, and then enter Inside-left.On the slide, drag the rectangle until the right edge is against the vertical drawing guide.On the Home, tab, in the Drawing group, click Arrange, point to Align, and then do the following:ClickAlign to Slide.Click Align Middle. To reproduce the picture in the Inside-left page 3 group, do the following: On the Insert tab, in the Illustrations group, click Picture.In the InsertPicture dialog box, select a picture, and then click Insert.On the slide, select the picture. Under Picture Tools, on the Format tab, in the bottom right corner of the Size group, click the Size and Position dialog box launcher. In the Size and Position dialog box, on the Size tab, resize or crop the picture as needed so that under Size and rotate, the Height box is set to 1.4” and the Width box is set to 2.1”. Resize the picture under Size and rotate by entering values into the Height and Width boxes. Crop the picture under Crop from by entering values into the Left, Right, Top, and Bottom boxes. On the slide, drag the picture until the left edge is 0.5” to the right of the vertical drawing guide and the top edge is 0.25” below the horizontal drawing guide.To reproduce the text box in the Inside-left page 3 group, do the following: On the Insert tab, in the Text group, click Text Box, and then on the slide, drag to draw the text box. Enter text in the text box, and then select the text. On the Home tab, in the Font group, do the following:In the Font list, select Bodoni MT Condensed.In the Font Size list, select 16.On the slide, drag the text box until the right edgeof the text is 0.5” to the left of the vertical drawing guide and the bottom edge of the text is 0.25” above the horizontal drawing guide.If the text is too wide for the page, drag the adjustment handles on the text box to decrease the width, and then repeat the previous step to reposition. To reproduce the page edges in the Inside-left page 3 group, do the following: In the Selection and Visibility pane, select the Inside-left group you just created. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.In the Selection and Visibility pane, select the straight connector (line) that you just ungrouped from the page.On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. On the slide, drag the duplicate line until it is very close to the original line. In the Selection and Visibility pane, press and hold CTRL, and then select the two straight connectors (lines). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align Selected Objects.Click Align Middle. With the group of lines still selected, on the Home tab, in the Drawing group, click Arrange, and then clickGroup.On the slide, drag the group until the leftedge of the group of lines is touching the left edge of the rectangle.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines, the rectangle, the text box, and the picture. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.Also in the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-left page 3.To reproduce the first shape in the Inside-right page1group on this slide, do the following:In the Selection and Visibility pane, select the Inside-left page 2 group.On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate.In the Selection and Visibility pane, double-click the new group to edit the name, and then enter Inside-right.In the Selection and Visibility pane, select the Inside-right group. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and then click More Rotation Options. In the Size and Position dialog box, on the Size tab, under Size and rotation, in the Rotation box, enter 180°.On the slide, drag the group until the left edge is against the vertical drawing guide. On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle. To reproduce the text box in the Inside-right page1group on this slide, do the following:On the Insert tab, in the Text group, click TextBox. Drag to draw a text box on the slide.Enter text in the text box (to match the example above, enter Introduction), and then select the text. On the Home tab, in the Font group, do the following:In the Font list, select Vivaldi.In the Font Size list, select 18.On the Home tab, in the Paragraph group, click Center to center the text in the text box.On the slide, drag the text box until the left edge of the text is 0.75” to the right of the vertical drawing guide and the bottom edge of the text is 0.5” above the horizontal drawing guide.If the text is too wide for the page, drag the adjustment handles on the text box to decrease the width, and then repeat the previous step to reposition. To reproduce the page edges in the Inside-right page1group on this slide, do the following:In the Selection and Visibility pane, select the Inside-right group you just created.On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.In the Selection and Visibility pane, select the straight connector (line) that you just ungrouped from the page.On the Home tab, in the Clipboard group, click the arrow under Paste, and then click Duplicate. Repeat this process for a total of six lines. On the slide, drag the six lines until they are bunched together in a dense group, no wider than 0.5”. In the Selection and Visibility pane, press and hold CTRL, and then select the six straight connectors (lines). On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align Selected Objects.Click Distribute Horizontally.Click Align Middle. With the group of lines still selected, on the Home tab, in the Drawing group, click Arrange, and then clickGroup.On the slide, drag the group until the right edge of the group of lines is touching the right edge of the page.On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:Click Align to Slide.Click Align Middle.In the Selection and Visibility pane, press and hold CTRL, and then select the new group of lines, the rectangle, and the text box. On the Home tab, in the Drawing group, click the arrow under Arrange, and then click Group.Also in the Selection and Visibility pane, press and hold CTRL, double-click the new group to edit the name, and then enter Inside-right page 1.Right-click the slide background area, and then click Grid and Guides. In the Grid and Guides dialog box, under Guide settings, clear Display drawing guides on screen.On the View tab, in the Show/Hide group, clear Ruler.In the Selection and Visibility pane, the final arrangement of the six groups of objects should be the following (from top to bottom):Inside-right page 1Inside-left page 3Inside-right page 2 Inside-left page 2Inside-right page 3Inside-left page 1To move a group of objects up in the Selectionand Visibility pane, do the following:In the Selection and Visibility pane, select the group of objects.On the Home tab, in the Drawing group, click Arrange, and then click BringForward.To move a group of objects down in the Selectionand Visibility pane, do the following:In the Selection and Visibility pane, select the group of objects.On the Home tab, in the Drawing group, click Arrange, and then clickSend Backward.To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation. In the Selection and Visibility pane, select the Inside-right page 1 group. In the CustomAnimation task pane, do the following:Click Add Effect, point to Exit, and then click MoreEffects. In the AddExitEffect dialog box, under Moderate, click Collapse.Select the first animation effect (collapse effect for the Inside-right page 1 group). Under Modify: Collapse,do the following:In the Start list, select WithPrevious. In the Direction list, select To Left.In the Speed list, select Fast. In the Selection and Visibility pane, select the Inside-left page 2 group. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Moderate, click Stretch.Select the second animation effect (stretch effect for the Inside-left page 2 group). Under Modify: Stretch,do the following:In the Start list, select AfterPrevious.In the Direction list, select FromRight. In the Speed list, select Fast. In the Selection and Visibility pane, select the Inside-right page 2 group. In the CustomAnimation task pane, do the following:Click Add Effect, point to Exit, and then click MoreEffects. In the AddExitEffect dialog box, under Moderate, click Collapse.Select the third animation effect (collapse effect for the Inside-right page 2 group). Under Modify: Collapse,do the following:In the Start list, select On Click.In the Direction list, select To Left.In the Speed list, select Fast. In the Selection and Visibility pane, select the Inside-left page 3 group. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Moderate, click Stretch.Select the fourth animation effect (stretch effect for the Inside-left page 3 group). Under Modify: Stretch,do the following:In the Start list, select AfterPrevious.In the Direction list, select FromRight. In the Speed list, select Fast. To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 63%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1, Lighter 50% (second row, fifth option from the left).
  • SmartArt custom animation effects: trapezoid list(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Trapezoid List (fifth row, second option from the left), and then click OK to insert the graphic into the slide.To create a fourth shape in the graphic, select the third shape from the left, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow under AddShape and select AddShapeAfter.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bulleted list below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Accent 5 click Gradient Range - Accent 5 (third option from the left).Click More, and then under 3-D click Polished (first row, first option from the left).On the Home tab, in the Font group, select TwCen MT Condensed from the Font list, and then select 24 from the Font Size list. Select the text in one of the headings. On the Home tab, in the Font group, select 28 from the Font Size list. Repeat this process for the text in the other headings. Press and hold SHIFT, and then select all four of the quadrangles in the graphic. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane, click Text Box. In the Text Box pane, under Text layout, in the Vertical alignment list, select Middle.Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 3.74”.In the Width box, enter 6.67”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Moderate, click Stretch. Under Modify: Stretch, in the Direction list, select From Right.Under Modify: Stretch, in the Speed list, select Fast.Also in the CustomAnimation task pane, click Add Effect, point to Motion Paths, and then click Right. On the slide, right-click the motion path effect, and then click ReversePathDirection.Press and hold CTRL, and then select both animation effects in the Custom Animation task pane. Click the arrow to the right of the secondanimation effect (right motion path), and then click EffectOptions. In the Motion Path dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under each of the animation effects to expand the contents of the list of effects.Press and hold CTRL, and then select the first, second, third, and fourth animation effects (stretch effects) in the Custom Animation task pane. Under Modify: Stretch, in the Start list, select After Previous.Press and hold CTRL, select the fifth, sixth, seventh, and eighth animation effects (right motion paths) in the Custom Animation task pane, and then do the following: Under Modify: Right, in the Start list, select With Previous.Under Modify: Right, in the Speed list, select Fast.Also in the Custom Animation task pane, do the following to reorder the list of effects:Drag the fifth animation effect (first right motion path) until it is second in the list of effects.Drag the sixth animation effect (second right motion path) until it is fourth in the list of effects.Drag the seventh animation effect (third right motion path) until it is sixth in the list of effects.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction list, click From Corner (fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickWhite, Background 1, Darker 35% (fifth row, first option from the left).
  • SmartArt custom animation effects: bending process(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click Vertical Bending Process (fifth row, third option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Accent 1 click Colored Fill – Accent 1 (second option from the left).Click More, and then under 3-D click Polished (first option from the left).On the Home tab, in the Font group, select Gill Sans MT from the Font list, and then select 24 from the Font Size list. Select the top left shape (starting point)in the graphic, and then do the following: Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, and then under Theme Colors click Olive Green, Accent 3, Darker 25% (fifth row, seventh option from the left).Under SmartArtTools, on the Format tab, in the Shapes group, click Change Shape, and then under Flowchart click Off-page Connector (second row, second option from the left).Select the bottom right shape (ending point) in the graphic, and then do the following:Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, and then under Theme Colors click Red, Accent 2, Darker 25% (fifth row, sixth option from the left).Under SmartArtTools, on the Format tab, in the Shapes group, click Change Shape, and then under Basic Shapes click Hexagon (first row, eighth option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimationtask pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Fade.Under Modify: Fade, in the Speed list, select Fast.Also in the Custom Animation task pane, select the fade effect. Click the arrow to the right of the fade effect, and then click EffectOptions. In the Fade dialog box, on the SmartArtAnimation tab, in the Group graphic list, select One by one, and then click OK.Also in the Custom Animation task pane, click the double arrow under the fade effect to expand the contents of the list of effects,and then do the following:Press and hold CTRL, select the first, third, fifth, seventh, ninth, 11th, 13th, 15th, and 17th animation effects (fade effects for the rectangles), and then do the following:Click Change, point to Entrance, and then click MoreEffects. In the Change Entrance Effect dialog box, under Moderate, click Stretch.Under Modify: Stretch, in the Start list, select With Previous. Under Modify: Stretch, in the Speed list, select Fast.Press and hold CTRL, and then select the first, third, fifth, 15th, and 17thanimation effects (stretch effects for the first, second, third, eighth, and ninth rectangles in the path). Under Modify: Stretch, in the Direction list, select From Top.Press and hold CTRL, and then select the seventh and 13th animation effects (stretch effects for the fourth and seventh rectangles in the path). Under Modify: Stretch, in the Direction list, select From Left. Press and hold CTRL, and then select the ninth and 11th animation effects (stretch effects for the fifth and sixth rectangles in the path). Under Modify: Stretch, in the Direction list, select From Bottom.Press and hold CTRL, and then select the second, fourth, sixth, eighth, 10th, 12th, 14th, and 16th animation effects (fade effects for the connectors). Under Modify: Fade, in the Start list, select After Previous.Select the eighth animation effect (fade effect for the connector between the fourth and fifth rectangle). Click the arrow to the right of the eighth animation effect, and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5, and then click OK.Select the 10th animation effect (fade effect for the connector between the fifth and sixth rectangle). Click the arrow to the right of the 10th animation effect, and then click Timing. In the Fade dialog box, on the Timing tab, in the Delay box, enter 0.5.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Down(first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colorsclick Blue, Accent 1, Darker 25% (fifth row, fifth option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 71%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1 (first row, second option from the left).
  • SmartArt custom animation effects: expand and peek in(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Matrix. In the Matrix pane, click Titled Matrix (second option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following: Click ChangeColors, and then under Colorful click Colorful - Accent Colors (first option from the left).Click More, and then under Best Match for Document click Moderate Effect (fourth option from the left).On the Home tab, in the Font group, select Calibri from the Font list, and then select 24 from the Font Size list.On the slide, select the text in the center rounded rectangle of the graphic.On the Home tab, in the Font group, select 28 from the Font Size list, click the arrow next to Font Color,and then under Theme Colors click White, Background 1 (first row, first option from the left).Right-click the rounded rectangle in the center of the graphic, and then click Format Shape.In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until three stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 80%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).Select Stop 3 from the list, and then do the following:In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15%(third row, first option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following: Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Expand. Under Modify: Expand, in the Speed list, select Fast.Also in the Custom Animation task pane, select the expand effect. Click the arrow to the right of the expand effect, and then click Effect Options. In the Expand dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the expand effect to expand the contents of the list of effects.Press and hold CTRL, and then select all five expand effects in the Custom Animation pane. Under Modify: Expand, in the Start list, select With Previous.Press and hold CTRL, select the second, third, fourth, and fifth expand effects in the Custom Animation pane, and then do the following:Under Modify: Expand, click Change, point to Entrance, and then click More Effects. In the Change Entrance Effect dialog box, under Basic, click Peek In, and then click OK.Under Modify: Peek In, in the Speed list, select Fast.Also in the CustomAnimation task pane, do the following:Select the second expand effect. Under Modify: Peek In, in the Start list, select After Previous.Select the third expand effect. Under Modify: Peek In, in theDirection list, select From Left.Select the fourth expand effect. Under Modify: Peek In, in the Direction list, select From Right.Select the fifth expand effect. Under Modify: Peek In, in the Direction list, select From Top.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Corner (second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (third row, first option from the left).
  • 3-D tiles with texture(Intermediate)To reproduce the first rectangleon this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and then under Rectangles click Rectangle (first option from the left). On the slide, drag to draw a rectangle. Select the rectangle. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter2.22”.In the ShapeWidth box, enter2.68”.Right-click the rectangle and select EditText. Enter 1, and then select the text. On the Home tab, in the Font group, in the Font list select Calibri, and in the FontSize box enter 100 pt. On the Home tab, in the Paragraph group, click Center.Under DrawingTools, on the Format tab, in the WordArtStyles group, in the bottom right corner, click the FormatTextEffects dialog box launcher.In the FormatTextEffects dialog box, click TextFill in the left pane. In the TextFill pane, select Solidfill, click the button next toColor, and then under Theme Colors clickTan, Background 2, Darker 25% (third row, third option from the left).Also in the FormatTextEffects dialog box, click Shadow in the left pane, and in the Shadow pane, under Presets , under Inner, click InsideDiagonalTopLeft (first row, first option from the left).Select the rectangle.On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane. Select Picture or texture fill in the Fill pane, click the button next to Texture, and then click RecycledPaper (third row, fourth option from the left).Also in the same dialog box (now the Format Picture dialog box), click Line Color in the left pane, and then in the Line Color pane, select No line. Also in the FormatPicture dialog box, click Shadow in the left pane. In the Shadow pane, click the button next toPresets, and then under Outer click Offset Diagonal Bottom Right (first row, first option from the left). Also in the FormatPicture dialog box, click 3-D Format in the left pane, and then in the 3-D Format pane do the following:Under Bevel, in the Top list, selectAngle (second row, first option from the left). Next to Top, in the Width box, enter 6 pt, and in the Height box, enter 6 pt. Under Bevel, in the Bottom list, select Circle (first row, first option from the left).Next to Bottom, in the Width box, enter 6 pt, and in the Height box, enter 6 pt.Under Depth, in the Depth box, enter 4.5 pt.Under Surface, in the Material list, under Standard, select WarmMatte (second option from the left).Under Surface, in the Lighting list, under Neutral, select Soft (first row, third option from the left), and in the Angle box, enter 280°.Also in the FormatPicture dialog box, click 3-D Rotation in the left pane. In the 3-D Rotation pane, in thePresets list, under Perspective, selectPerspectiveAbove (second row, first option from the left), and then do the following:In the Y box, enter 300°. In the Perspective box, enter60°.Drag the rectangle to the left side of the slide.To reproduce the other rectangles on this slide, do the following:Select the rectangle. On the Home tab, in the Clipboard group, click the arrow under Paste and select Duplicate.Select the text in the second rectangle, and enter 2. On the Home tab, in the Font group, click the arrow next to FontColor and then under Theme Colors select Black, Text 1, Lighter 50% (second row, second option from the left).Select the second rectangle. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane select Picture or texture fill. In the Texture list select Granite (third row, second option from the left).Also in the same dialog box (now the FormatPicture dialog box), click 3-DRotation in the left pane, and in the 3-DRotation pane, in the Presets list, under Perspective selectPerspectiveContrastingRight (third row, first option from the left).Also in the FormatPicture dialog box, click Shadow in the left pane, and in the Shadow pane, in the Presets list, under Perspective, select PerspectiveDiagonalUpperLeft (first row, first option from the left).Drag the second rectangle to the center of the slide.Select the first rectangle. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.Select the text in the third rectangle and enter 3. On the Home tab, in the Font group, click the arrow next to FontColor, and then under Theme Colors select White, Background 1, Darker 50% (sixth row, first option from the left).Select the third rectangle. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter3.0”.In the ShapeWidth box, enter3.26”.With the third rectangle still selected, on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane select Picture or texture fill. In the Texture list select White Marble (second row, fifth option from the left).Also in the same dialog box (now the FormatPicture dialog box), click 3-DRotation in the left pane, and in the 3-DRotation pane, under Rotation, do the following:In the X box, enter 63.7°.In the Y box, enter 319.3°.In the Z box, enter 289.4°.In the Perspective box, enter 90°.Drag the third rectangle to the right side of the slide.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 162, Green: 152, Blue: 138.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 54%.Click the button next to Color, and then click Black, Text 1, Lighter 15% (fifth row, second option from the left).
  • Glowing 3-D buttons(Intermediate)To reproduce the shape effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes click Oval (first row, second option from the left). Press and hold SHIFT to constrain the shape to a circle, and then on the slide, drag to draw a circle. Select the circle. Under DrawingTools, on the Format tab, in the Size group, do the following:In the Shape Height box, enter 0.88”.In the Shape Width box, enter 0.88”.On the Home tab, in the Drawing group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial. Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add or Remove until three stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%. Click the button next to Color, and then under Theme Colorsclick Olive Green, Accent 3, Lighter 80% (second row, seventh option from the left). Select Stop 2 from the list, and then do the following:In the Stop position box, enter 41%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 124, Green: 220, Blue: 52.Select Stop 3 from the list, and then do the following:In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colorsclick Black, Text 1, Lighter 5% (sixth row, second option from the left). Also in the Format Shape dialog box, click Line Color in the left pane, and then in the Line Color pane, select No line. Also in the Format Shape dialog box, click Shadow in the left pane, and then do the following in the Shadow pane:Click the button next to Presets, and then under Outer click Offset Center (second row, second option from the left).In the Transparency box, enter 60%.In the Size box, enter 102%.In the Blur box, enter 5 pt. In the Angle box, enter 0⁰.In the Distance box, enter 0 pt. Also in the Format Shape dialog box, click 3-D Format in the left pane, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Soft Round (second row, second option from the left). Next to Top, in the Width box, enter 18.5 pt, and in the Height box, enter 6.5 pt.Under Surface, click the button next to Material, and under Translucent click Powder (first option from the left). Click the button next to Lighting, and under Special, click Flat (first option from the left). In the Angle box, enter 310°.On the Home tab, in the Drawing group, click Shape Effects, point to Glow, and then do the following:ClickAccentcolor1, 8 pt glow (second row, first option from the left). Point to More Glow Colors, and then click White, Background 1, Darker 35% (fifth row, first option from the left).Select the circle. On the Home tab, in the Clipboard group, click the button under Paste, and then click Duplicate. On the slide, drag the duplicate circle away from the first circle. Select the duplicate circle. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:Under Gradient stops, click Add or Remove until three stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%. Click the button next to Color, and then under Theme Colorsclick Olive Green, Accent 3, Lighter 80% (second row, seventh option from the left). Select Stop 2 from the list, and then do the following:In the Stop position box, enter 41%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 11, Green: 189, Blue: 245.Select Stop 3 from the list, and then do the following:In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colorsclick Black, Text 1, Lighter 5% (sixth row, second option from the left). Select the duplicate circle. On the Home tab, in the Clipboard group, click the button under Paste, and then click Duplicate. On the slide, drag the new duplicate circle away from the second circle. Select the new duplicate circle. Under Drawing Tools, on the Format tab, in the bottom right corner of the Shape Styles group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:Under Gradient stops, click Add or Remove until three stops appear in the drop-down list. Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 255, Green: 209, Blue: 159.Select Stop 2 from the list, and then do the following:In the Stop position box, enter 41%. Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 255, Green: 134, Blue: 1.Select Stop 3 from the list, and then do the following:In the Stop position box, enter 100%. Click the button next to Color, and then under Theme Colorsclick Black, Text 1, Lighter 5% (sixth row, second option from the left). Press and hold SHIFT and select all three circles. On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and then click Align to Slide.Point to Align, and then click Align Middle.Point to Align, and then click Align Horizontally. Click Group.Point to Align, and then click Align Center. To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then clickFormat Background.In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then clickFrom Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter0%.Click the button next to Color, and then under Theme Colorsclick White, Background 1(first row, first option from the left).Select Stop 2 from the list, and then do the following:In the Stop position box, enter100%.Click the button next to Color, and then under Theme Colorsclick White, Background 1, Darker 50%(sixth row, first option from the left).
  • Diagnostico empresarial

    1. 1. DIAGNÓSTICO EMPRESARIAL<br />
    2. 2. O DiagnósticoEmpresarial é premissabásicapara o sucessoorganizacional.<br />Porquefazer ?<br />. Avaliação<br />.Reorganização .Direcionamento<br />
    3. 3. Quando é necessário? <br />
    4. 4. Ajustando os Processos<br />A<br />P<br />D<br />C<br />• Colocar em prática<br />• Padronizar<br />•Identificação<br />•Métodos<br />•Metas<br />•Desenhar processos<br />•Treinar<br />•Testar<br />• Corrigir<br />
    5. 5. Áreas Críticas<br />
    6. 6. Análise SWOT<br />
    7. 7. Análise Ambiente Externo<br />Ambiente Social<br />Economia<br />Ambiente Competitivo<br />Ambiente Natural<br />Política e Legislação<br />Tecnologia<br />
    8. 8. As mudanças são nossa única certeza!<br />

    ×