2. What we will Learnā¦
ā¢ What is a current?
ā¢ How to draw electric circuit diagrams
ā¢ What is potential difference, voltage and E.M.F?
ā¢ What is resistance?
ā¢ S/E: Circuits arranged in series versus parallel
ā¢ S/E: Fixed resistors versus variable resistors
ā¢ Effects of electric current
3. What is Electricity???
Definition:
Electricity is a form of energy that can
be easily changed to other forms.
4. Where does Electricity come from?
Mainly 2 sources:
1) Power Stations
- Supply a lot of electricity
- Used in many electrical
appliances
2) Electric Cells (batteries)
- Supply a little electricity
- Portable
- Safe
5.
6. How does an Electrical
Appliance Work?
ā¢ To make an electrical appliance work,
electricity must flow through it.
ā¢ The flow of electricity is called an electric
current.
ā¢ The path along which the electric current
moves is called the electric circuit.
7. What is an Electric
Current???
electric
cell connecting
wire
filament
flow of electrons
Definition:
An electric current is the rate of flow of electric
charges in a circuit.
8. Electric Charges
ā¢ Electric charges are made up of positive
charges (protons) and negative charges
(electrons).
ā¢ When these charges flow in a circuit, a
current is produced.
9. How does electricity flow?
ā¢ The battery in a circuit gives energy to
the electrons and pushes them around
a circuit, from the negative terminal of
the cell, round the circuit and back to
the positive terminal of the cell.
10. How to Measure Current?
ā¢ The SI unit for electric current is ampere (A).
ā¢ Smaller currents are measured in
milliamperes (mA).
1 A = 1,000 mA
1 mA = 0.001 A
ā¢ Different electrical components and
appliances require different sizes of current
to turn them on.
11. Instrument to Measure Current
ā¢ An ammeter is an instrument used for
measuring electric current.
12. Ammeter
ā¢ It must be connected in series in the circuit.
ā¢ Positive side of ammeter must be connected
nearest to the positive terminal of the battery
(electric cell), and vice versa.
13.
14. Electric Circuits
ā¢ Electric circuits are connecting wires
made up of electrical
components electric cell
ā¢ These components
must be joined
together without any
gap in between to
light bulb circuit board
form a closed circuit.
Note:
Components refer to the
light bulb, wires, battery
15. Electric Circuits
ā¢ Incomplete circuits are called open circuits.
connecting wire is no source of
missing electrical energy
Both the circuits in the diagram are incomplete, hence they are known
as āopen circuitsā.
16. An electric current flows
only when there is:
ā¢ a source of electrical energy and
ā¢ a closed circuit
connecting wires
electric cell
light bulb circuit board
17. How to draw Circuit Diagrams
Component Symbol Component Symbol
+ +
An electric cell Battery
Switch (open)
Light bulb (lamp) Switch Switch (closed)
Connecting wires Connecting wires
(not joined) (joined)
Symbols are used to represent the various electrical
components in circuits.
21. Switches
A switch is used to open or close a circuit.
Main switch used
in buildings
Switches used on circuit
22. Circuit diagrams for open
and closed circuits
Open circuit. Close circuit.
Bulb does not Bulb will light
light up when up when the
the switch is switch is
23. Series and Parallel
There are 2 ways in which an
electric circuit can be
arranged:
1. Series
2. Parallel
24. Series Circuit
ā¢ A series circuit connects the components one
after the other
ā¢ A single loop is formed
ā¢ A break in any part of a series circuit stops the
flow of current in the whole circuit.
25. Parallel Circuit
ā¢ A parallel circuit divides into two or more branches.
ā¢ The current divides and flows through each parallel
branch.
ā¢ If a component breaks or is removed, the other
components remain on.
26. Which of the following is a
series circuit?
Which is a parallel circuit?
Series Circuit Parallel Cir
27. Draw the circuit diagram for
the following set up and state
whether it is a series or
parallel circuit.
28. Draw the circuit diagram for
the following set up and state
whether it is a series or
parallel circuit.
30. Which of the following is a
series circuit?
Which is a parallel circuit?
Series Circuit Parallel Circ
31.
32. Voltage
ā¢ An electric cell gives energy to the electrons and
pushes them round a circuit. Voltage is a measure
of how much energy the electrons receive.
ā¢ Different voltages are supplied by different cells and
batteries.
1.5 V Dry Cell
12 V Car Battery 9 V Dry Cell
33. How to Measure
Voltage?
ā¢ The SI unit for voltage is volt
(V).
ā¢ A voltmeter is an instrument
used for measuring voltages.
34. Voltmeter
ā¢ Voltmeters must be connected
in parallel to the circuit.
ā¢ The positive side of voltmeter
is connected to the positive
terminal of the cell, and vice
versa.
35. Recall: Ammeter!!!
ā¢ It must be connected in series in the
circuit.
ā¢ Positive side of ammeter must be
connected nearest to the positive
terminal of the battery (electric
cell), and vice versa.
36. Electromotive Force
(e.m.f)
ā¢ Electromotive force is the
same as voltage.
ā¢ E.m.f refers to the amount of
energy supplied by the electric
source (eg. battery) to each unit
of electric charge.
39. Potential Difference
ā¢
(p.d)
Remember Diffusion?
ā¢ High ļ Low
electric
ā¢ Similarly, electric charges cell connecting
wire
will flow from a point of
filament
higher potential (energy) to
lower potential
flow of electrons
ā¢This difference in electric potential between 2 points in a
circuit is known as the potential difference. It is the same
as VOLTAGE also.
40.
41. Resistance
ā¢ When an electric current flows
through a circuit, there will be
some resistance that opposes it.
(similar to friction)
ā¢ It can be measuredRbyResistance
V = dividing
R=
voltage by the current.
I V = Voltage
I = Current
42. Resistance
ā¢ Good conductors of electricity
have LOW RESISTANCE. (Eg. Metal
objects)
ā Electricity is able to flow
through them very easily
ā¢ Poor conductors of electricity
have HIGH RESISTANCE. (Eg. Wood,
cloth)
ā Electricity is not able to
43. Resistance
ā¢ The SI unit for resistance is ohm (ļ)
ā¢ Different electrical components
have different resistance
ā¢ For example, nichrome wires have a
higher resistance than copper wires.
So should we use
nichrome or copper
to make wires?
44. Example 1
ā¢ An electric rice cooker
operates at 240 V and uses a
current of 8 A. What is the
Voltage (V) of the rice cooker?
resistance
240
= 240 V R=
8
Current (I)
= 30 ļ
=8A V
R=
I
45. Resistors
ā¢ An electrical component that is specially made to have a
certain resistance is called a resistor.
ā¢ They can be connected in a circuit to resist the current
flow.
46. Fixed Resistors and
Variable Resistors
ā¢ Fixed resistors have only one resistance value
ā¢ Variable resistors can be adjusted to change
the resistance.
fixed resistor symbol variable resistor symbol
ā¢Variable
resistors are
useful in light
dimmers and
47. S/E: Resistors
ā¢ Resistors can be connected in
series or parallel
extra resistor in
Resistors connected
series results in
dimmer bulb
in SERIES
extra resistor in
Resistors connected
parallel results
in brighter bulb
single resistor
in PARALLEL
48. S/E: Resistors in
Series
ā¢ When resistors
are connected in
series, the
resistance will
2ļ 3ļ
add up and
increase.
ā¢ R = RThe totalR3ā¦
1 + R2 + resistance for this circuit is:
2ļ+3ļ=5ļ
49. S/E: Resistors in
Parallel
ā¢ When resistors are
connected in parallel, the
resistance will decrease
ā¢ This is because they will
provide alternate routes for
the current to flow.
50. S/E: Resistors in
Parallel
1 1 1 1
= + +
R R1 R2 R3
What is the 6ļ
resistance of the
circuit? + 1
1 1 6ļ
=
R 6 6
1
=
2
=
1
R = 3ļ The final
6
R 3
resistance is
51. What we will Learnā¦
ā¢ What is a current?
ā¢ How to draw electric circuit
diagrams
ā¢ What is potential difference, voltage
and E.M.F?
ā¢ What is resistance?
ā¢ S/E: Circuits arranged in series versus
parallel
52.
53. Heating Effect of
ā¢
Electric Current
When an electric current flows through
a wire, the wire heats up. Electrical
energy has been converted into heat
energy.
ā¢ The greater the resistance of the wire,
the greater the amount of heat
produced. This heating effect is used in
common electrical appliances.
Iron Kettle Hair Dryer
54. A kettle uses both copper and nichrome wires.
Copper has low resistance while nichrome has high resistance.
Which material, copper or nichrome, should be used for the heating
element, and for the external wire?
Use copper wire
for the external
wire as it has low
resistance &
produces less heat
Use nichrome wire for the heating
element as it has high resistance&
produces a lot of heat
55. Heating Effect of
Electric Current
ARGON (inert/unreactive gas)
filament wire produces
heat and light
In a light bulb, the
heated filament which is
also a resistance wire,
becomes so hot that
light is also emitted.
56. Chemical Effect of
Electric Current
What is ELECTROLYSIS?
Definition:
ā¢ Electrolysis is the chemical change that occurs when an electric
current passes through solutions or molten compounds.
58. 1. Electroplating
ā¢ In electroplating, a key is
covered with a thin layer of
copper when electricity is
- +
passed through the solution.
key copper copper on
wire the key
copper
sulphate
solution
start after a few minutes
60. 2. Extraction of metals
ā¢ Some metals (eg. sodium, aluminium) are obtained
by electrolysis.
ā¢ To extract the metal
ā heat the solid compound of the metal until it melts
ā pass an electric current through the molten
compound
61. Magnetic Effect of a
ā¢
Current near a
A straight wire is placed
compass. When an electric current
flows through the wire, the
compass needle is deflected. This
shows that an electric current has
a magnetic effect.
current
in wire
compass needle is
deflected
62. Electromagnet
ā¢ An electromagnet is a magnet that
is made by using electricity
ā¢ It consist of a wire coiled around a
metal rod (eg. of wire
coil Iron)
iron core
to battery
compass needle is strongly
attracted to iron core
63. Electromagnet
The magnetic effect of the electromagnet can be
increased by:
1. increasing the current (by using more batteries)
2. increasing the number of turns of wire in the coil
3. Using an iron rod
64. Differences between an
electromagnet and a magnet:
Electromagnet Magnet
A permanent magnet
A temporary magnet which retains
which can be turned magnetism until it is
on and off using purposely
electric current. demagnetised
(spoilt).
Magnet can be made Magnet remains the
stronger or weaker same strength
65. Uses of
Electromagnets
ā¢ Cranes that lift
iron/steel
ā¢ Iron/steel
separators crane
ā¢ Electric bells
ā¢ Magnetically
levitated trains
ā¢ Electric motors
Electric bell
Electric motor in fans