38. MODES OF A ROUTER COMMANDS USED IN DIFFERENT MODES
39.
40.
41.
42.
43. Some Privileged Mode Commands Copies from one file to another, or one configuration to another Copy Turns debugging functions off Undebug Debugging functions Debug Runs setup utility Setup Sends a message to other tty lines Send Reboots the router Reload Now gives a lot more options including router configuration Show
44.
45.
46.
47.
48.
49. Interface Configuration Example Tera Term - ciscolab.esage.com F ile E dit S etup C ontrol W indow H elp tr1(config)#interface ethernet 0 tr1(config-if)#ip address 10.0.10.1 255.255.255.0 tr1(config-if)#no shutdown 5d01h: %LINK-5-CHANGED: Interface ethernet0, changed state to initializing 5d01h: %LINK-3-UPDOWN: Interface ethernet0, changed state to up 5d01h: %LINEPROTO-5-UPDOWN: Line protocol on Interface ethernet0, changed state to up tr1(config-if)#^Z 5d01h: %SYS-5-CONFIG_I: Configured from console by console tr1#ping 10.0.10.254 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.0.10.254, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/9/32 ms tr1#