O slideshow foi denunciado.
Utilizamos seu perfil e dados de atividades no LinkedIn para personalizar e exibir anúncios mais relevantes. Altere suas preferências de anúncios quando desejar.

Compressed gas cil safety

1.444 visualizações

Publicada em

Publicada em: Indústria automotiva
  • Seja o primeiro a comentar

Compressed gas cil safety

  1. 1. For the user of this presentation:This presentation has animation that can only be seen when you select“View Show” from the “Slide Show” menu item.Author uses this presentation for Compressed Gas Cylinder TrainingDuring the “what is wrong with this picture” segment. Trainees haverated this segment as the best part of the training.If you have other photos you care to submit, send them directly torcoll@fnal.gov with a note as to what is wrong in the photo.I will continue adding to this presentation and posting to theVermont SIRI.Thanks,Rafael Coll (630) 840-8518 Compressed Gas
  2. 2. Subject to damage from other activities in the vicinity Electrical cord inCylinder laying Contact with thein a horizontal cylinderposition. Compressed Gas
  3. 3. ChainCylinders are not protected from falling. Notethat the Chain is not secured across. Compressed Gas
  4. 4. Electrical Cord1. Cylinder not 2. Cylinder should be stored3. Subject to damage. secured 4. Electrical cord draped over. Compressed Gas
  5. 5. 1. Small cylinder not tied off 2. Combustibles stored with cylinders 3. Bad housekeeping4. Acetylene and Oxygen storedtoo close together and no chain. Compressed Gas
  6. 6. 1. Cylinder with no valve or cap installed 2. Laying horizontal on the ground3. Subject to damage Compressed Gas
  7. 7. Electrical arcdamageCylinder is damaged. Should be taken out of service immediately! Compressed Gas
  8. 8. Cylinder should be in storage protected from damage and notlaying on the ground regardless if it is full or empty Compressed Gas
  9. 9. Old, corroded cylinder that should have been disposedof a long time ago. Compressed Gas
  10. 10. Forklift1. Cylinders laying on the ground and improperly stored2. Subject to damage from forklift operation in vicinity Compressed Gas
  11. 11. 1. Feed line exposed to damage/leak that could cause a fire/explosion2. Tripping Hazard Compressed Gas
  12. 12. 1. Inadequate housekeeping2. Valve caps should be installed. Compressed Gas
  13. 13. Acetylene Cylinder1. Unsecured acetylene cylinder 2. Exposed to damage Compressed Gas
  14. 14. Unsecured cylinders Compressed Gas
  15. 15. Regulator left pressurized after use Compressed Gas
  16. 16. Improper Storage Compressed Gas
  17. 17. Tie Off?Compressed Gas
  18. 18. Improper storage ofcylinders- acetyleneand oxygen storednext to each other Compressed Gas
  19. 19. Evidence of smoking next toacetylene cylinders Compressed Gas
  20. 20. This cylinder should be taken to storage and housekeeping should be improved. Compressed Gas
  21. 21. UnsecuredcylinderCompressed Gas
  22. 22. Unsecured Cylinder Compressed Gas
  23. 23. Cooking equipmentwithin 20 ftof containers Compressed Gas
  24. 24. Not Tied Tied Compressed Gas
  25. 25. oxy-acetylene torch connectedTo bottles without the torchconnected. Compressed Gas
  26. 26. Not in use.No cap installed Should be Stored.Housekeeping Compressed Gas
  27. 27. Cylinder not in usewith regulators stillOn the cylinder Free standing cylinder Compressed Gas
  28. 28. Free standingcylinder Compressed Gas
  29. 29. Free standing cylindersChain Compressed Gas
  30. 30. Cylindertied onlyWith a bungeecord Compressed Gas
  31. 31. Cylinders notSecured properly Compressed Gas
  32. 32. Free standingExposed to damage cylindersFrom constructionActivities in area Compressed Gas
  33. 33. Free standingcylinders Compressed Gas
  34. 34. Cylinder laying on its side Compressed Gas
  35. 35. What a pressurizedContainer can doWhen the right amountof heat is applied. Compressed Gas
  36. 36. How not to blow yourself upOr, the importance of usingflashbackarrestors on oxy-acetylene cartsandkeeping spark producing activitiesAway From You (min 35 ft.). ft.) Compressed Gas
  37. 37. An Ironworker crew was modifying a temporary structural steel bridgeusing an Oxygen/Acetylene torch setup on a cart, a portable welder,and a grinder. Apparently the Acetylene hose developed a leak andignited during the grinding operation ( Monday June 18, 2001 ) Compressed Gas
  38. 38. The torch setup was not equipped with a “flashback” arrestorcheck valve and the fire traveled through the hose into thecompressed cylinder. All Oxygen/Acetylene setups must have a “Flashback” arrestor check valve at the regulators, NOT the torch head, to prevent this type of occurrence. This little device would have prevented this fire. Compressed Gas