O slideshow foi denunciado.
Utilizamos seu perfil e dados de atividades no LinkedIn para personalizar e exibir anúncios mais relevantes. Altere suas preferências de anúncios quando desejar.

CCNA 2 Routing and Switching v5.0 Chapter 10

CCNA 2 Routing and Switching v5.0 Chapter 10

  • Seja o primeiro a comentar

CCNA 2 Routing and Switching v5.0 Chapter 10

  1. 1. Chapter 10: DHCP Routing & Switching © 2008 Cisco Systems, Inc. All Presentation_ID rights reserved. Cisco Confidential 1
  2. 2. Chapter 10 10.0 Introduction 10.1 Dynamic Host Configuration Protocol v4 10.2 Dynamic Host Configuration Protocol v6 10.3 Summary Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 2
  3. 3. Chapter 10: Objectives  Describe the operation of DHCPv4 in a small-to-medium-sized business network.  Configure a router as a DHCPv4 server.  Configure a router as a DHCPv4 client.  Troubleshoot a DHCP configuration for IPv4 in a switched network.  Explain the operation of DHCPv6.  Configure a stateless DHCPv6 for a small-to-medium-sized business.  Configure a stateful DHCPv6 for a small-to-medium-sized business.  Troubleshoot a DHCP configuration for IPv6 in a switched network. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 3
  4. 4. 10.1 Dynamic Host Configuration Protocol v4 © 2008 Cisco Systems, Inc. All Presentation_ID rights reserved. Cisco Confidential 4
  5. 5. DHCPv4 Operation Introducing DHCPv4 DHCPv4 uses three different address allocation methods:  Manual Allocation – The administrator assigns a pre-allocated IPv4 address to the client, and DHCPv4 communicates only the IPv4 address to the device.  Automatic Allocation – DHCPv4 automatically assigns a static IPv4 address permanently to a device, selecting it from a pool of available addresses.  Dynamic Allocation – DHCPv4 dynamically assigns, or leases, an IPv4 address from a pool of addresses for a limited period of time chosen by the server, or until the client no longer needs the address. This method is the most commonly used. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 5
  6. 6. DHCPv4 Operation DHCPv4 Operation Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 6
  7. 7. DHCPv4 Operation DHCPv4 Message Format Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 7
  8. 8. DHCPv4 Operation Format DHCPv4 Discover and Offer Messages Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 8
  9. 9. DHCPv4 Operation Configuring a DHCPv4 Server A Cisco router running the Cisco IOS software can be configured to act as a DHCPv4 server. To set up DHCP: 1. Exclude addresses from the pool. 2. Set up the DHCP pool name. 3. Define the range of addresses and subnet mask. Use the default-router command for the default gateway. Optional parameters that can be included in the pool – dns server, domain-name. To disable DHCP, use the no service dhcp command. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 9
  10. 10. DHCPv4 Operation Verifying a DHCPv4 Server  Commands to verify DHCP: show running-config | section dhcp show ip dhcp binding show ip dhcp server statistics  On the PC, issue the ipconfig /all command. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 10
  11. 11. DHCPv4 Operation DHCPv4 Relay Using an IP helper address enables a router to forward DHCPv4 broadcasts to the DHCPv4 server. Acting as a relay. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 11
  12. 12. Configuring a DHCPv4 Client Configuring a Router as a DHCPv4 Client Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 12
  13. 13. Troubleshoot DHCPv4 Troubleshooting Tasks Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 13
  14. 14. Troubleshoot DHCPv4 Verifying the Router DHCPv4 Configuration Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 14
  15. 15. Troubleshoot DHCPv4 Debugging DHCPv4 Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 15
  16. 16. 10.2 Dynamic Host Configuration Protocol v6 © 2008 Cisco Systems, Inc. All Presentation_ID rights reserved. Cisco Confidential 16
  17. 17. SLAAC and DHCPv6 Stateless Address Autoconfiguration Stateless Address Autoconfiguration (SLAAC) is a method in which a device can obtain an IPv6 global unicast address without the services of a DHCPv6 server. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 17
  18. 18. SLAAC and DHCPv6 SLAAC Operation Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 18
  19. 19. SLAAC and DHCPv6 SLAAC and DHCPv6 Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 19
  20. 20. SLAAC and DHCPv6 SLAAC Option Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 20
  21. 21. SLAAC and DHCPv6 Stateless DHCP Option Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 21
  22. 22. SLAAC and DHCPv6 Stateful DHCP Option Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 22
  23. 23. SLAAC and DHCPv6 DHCPv6 Operations Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 23
  24. 24. Stateless DHCPv6 Configuring a Router as a Stateless DHCPv6 Server Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 24
  25. 25. Stateless DHCPv6 Configuring a Router as a Stateless DHCPv6 Client Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 25
  26. 26. Stateless DHCPv6 Verifying Stateless DHCPv6 Verify the stateless DHCP client using the following commands:  show IPv6 interface  debug ipv6 dhcp detail Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 26
  27. 27. Stateful DHCPv6 Configuring a Router as a Stateful DHCPv6 Server Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 27
  28. 28. Stateful DHCPv6 Verifying Stateful DHCPv6  Verify the stateful DHCPv6 server using the following commands: show ipv6 dhcp pool show ipv6 dhcp binding  Verify the stateful DHCPv6 client using the show ipv6 interface command. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 28
  29. 29. Stateful DHCPv6 Configuring a Router as a Stateful DHCPv6 Relay Agent Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 29
  30. 30. Troubleshooting DHCPv6 Troubleshooting Tasks Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 30
  31. 31. Troubleshooting DHCPv6 Verifying the Router DHCPv6 Configuration Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 31
  32. 32. Troubleshooting DHCPv6 Debugging DHCPv6 Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 32
  33. 33. 10.3 Summary © 2008 Cisco Systems, Inc. All Presentation_ID rights reserved. Cisco Confidential 33
  34. 34. Chapter 10: Summary  All nodes on a network require a unique IP address to communicate with other devices.  DHCPv4 includes three different address allocation methods: Manual Allocation Automatic Allocation Dynamic Allocation  There are two methods available for the dynamic configuration of IPv6 global unicast addresses: Stateless Address Autoconfiguration (SLAAC) Dynamic Host Configuration Protocol for IPv6 (Stateful DHCPv6) Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 34
  35. 35. Chapter 10: Summary (cont.) The same tasks are involved when troubleshooting DHCPv4 and DHCPv6:  Resolve address conflicts.  Verify physical connectivity.  Test connectivity using a static IP address.  Verify the switch port configuration.  Test the operation on the same subnet or VLAN. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 35
  36. 36. Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 36

    Seja o primeiro a comentar

    Entre para ver os comentários

  • rezakoohey

    Dec. 22, 2014
  • suba240

    Jun. 16, 2015
  • PrincessLaureto

    Sep. 22, 2015
  • JohnCarloCatacutan

    Nov. 14, 2015
  • AngelicaGryt

    Dec. 11, 2015
  • StephenLynch18

    Jan. 3, 2016
  • catacutanjcsantos

    Mar. 10, 2016
  • AdrianRaeAdamos

    Jan. 3, 2017
  • DanielBuri

    Jan. 20, 2017
  • FatmaAlraisi4

    Apr. 7, 2017
  • abdoabdoh

    Aug. 10, 2017
  • MonicaBernal19

    Sep. 19, 2017
  • huytran18594

    Oct. 17, 2017
  • AngeLlyne2

    Dec. 6, 2017
  • AnesreEsaner

    Feb. 11, 2018
  • vuonlentamcaomoi

    Jun. 21, 2018
  • MiftahDula

    Sep. 26, 2020

CCNA 2 Routing and Switching v5.0 Chapter 10

Vistos

Vistos totais

11.316

No Slideshare

0

De incorporações

0

Número de incorporações

17

Ações

Baixados

2.130

Compartilhados

0

Comentários

0

Curtir

17

×