1. NESTOR V. ALEGA
Address: Maluno Norte, Benito Soliven, Isabela Philippines
Email Address : nestor_alega@yahoo.com
Mobile No. +639213417117 /+639283604541/ (Phil.)
Skype : alega.n
SUMMARY:
POSITION APPLIED :
ELECTRICAL TECHNICIAN/COMMISIONING AND MAINTENANCE
• With overseas experience in the Oil and Gas industries; and Nickel Mining,
Industries, knowledge of both onshore Maintenance and Commissioning, Start-
up.
• The ability to effectively carry out, motivate, organize and co-ordinate the
activities of a multi- cultural workforce with performance evaluating and
coaching skills;
• The ability to conduct and document tool-box safety talks as a safety tool;
• A systematic approach to Maintenance and Commissioning Start-up,
troubleshooting and diagnosing problems associated with electrical
distribution, and AC drives.
• A high standard of health and safety awareness.
• The ability to ensure the correct operation of a Permit-to-Work system is achieved;
• Interpretation and application of electrical engineering schematic and wiring
diagrams;
WORK EXPERIENCE:
POSITION : ELECTRICAL TECHNICIAN (COMMISIONING)
COMPANY : DAEWOO SHIPBUILDING MARINE ENGINEERING CO.
DATE : SEPTEMBER 25, 2014 TO MARCH 28,2015
JOBSITE : CHEVRON PLATFORM WHEASTONE PROJECT FOR OIL/GAS
SOUTH KOREA
DUTIES AND RESPONSIBLITIES:
Perform pre-commissioning and commissioning procedure of medium voltage MCC
switchboard and auxiliary control circuit. Solo run the motor uncouple/couple run
test(take reading on motor starting current, motor vibration(vertical & horizontal
bearing temperature of 415v,6.6kv and 11kv motor, That include operation and
functional test on the motor control.

2. Testing and carried out site pre-commission/commissioning of electrical equipment
(11kv.6.6kv.400v transformer switchgear and motor distribution panels lighting and
outlet devices and HV-LV cables and leading to energization of electrical equipment,
attending and inspection of punch list for satisfactory in compliance with the
standard, test and safety procedure.
Responsible for daily report, preparation and accomplishment of required document
such as check and test sheet record and punch list items and coordinate with client to
witness the inspection/testing activities and obtain approval/signature.
POSITION : ELECTRICAL TECHNICIAN (MAINTENANCE)
COMPANY : SHERRITT INTERNATIONAL (OG OWNERS GROUP)
DATE : OCTOBER 22, 2011 TO NOVEMBER 30, 2013
JOBSITE : AMBATOVY, NICKEL MINING PROCESSING PLANT
MADAGASCAR, SOUTH AFRICA
Duties and Responsibilities:
Carries out any work of maintenance, repair of a wide range of high voltage equipment and
associated systems such as generator, motor, transformers, uninterrupted power systems
(UPS) rectifiers, batteries, desalinators, switch gears, protection relays, microprocessor based
control and protection systems, variable speed drives, VFD, tests relay, control panel and
substation, and we use tough book to check or verify the fault on the tests relay.
Perform isolate/de-isolate/energized of electrical equipment up to low voltage level certified
after taking the required isolation certification test. And receives incoming work request from
supervisor with comment on required work, examines faulty equipment to determine work
scope and requirement, obtain necessary tools and spare parts and proceeds to worksite to
carry out the job. Ensure that all regulatory and safety devices, such as fuses, circuit breaker
etc, are properly installed, ensuring areas are clearly marked and sealed off and that the
appropriate safety and work permit have been obtain. Daily contact with operations and
maintenance personnel up to supervisor level to acquire information on and obtain necessary
permits to isolate and deal with, faulty electrical equipment.
POSITION : ELECTRICAL TECHNICIAN (COMMISIONING/MAINTENANCE)
COMPANY : QATAR KENTZ/KELLOGS BROWN AND ROOT
DATE : FEBRUARY 15, 2009 to MARCH 13, 2011
JOBSITE : PEARL GTL-PROJECT (RLIC-Doha-Qatar)
Duties and Responsibilities:
Carries out the routine predictive and preventive maintenance check on electrical equipment
such as high and low motors, transformer, turbines, generator equipment, motorized valves,
high and low voltage switch gear, control panels and relay station tests relay and VFDs. Work

3. includes visual inspection of equipment, checking the bearing of various motors, measuring
and recording details of winding resistance and I.R test, and tightening terminals, connections,
etc, checks for oil leakages, investigate terminal box desiccators for incorrect color code and
removing and laying out as necessary.
Performs routine electrical maintenance, repair arid test on a variety of electrical equipment,
system and tools. Includes regular checks on battery banks and topping-up electrolyte level.
Maintains street and building lighting system through replacement of lamp and starters,
Repairing circuit and fault, and checking water heater, power socket and distribution boxes.
Maintain the electrical motors of a variety of work shop tools and equipment on lathes, drill
and welding site. Also carries out all electrical activities during plant shutdown. Carries out
any new electrical installations, modification and reconnection of electrical equipment and
system under supervisor’s direction.
Complies with safety and fire rules and regulations, including the use of protective clothing
and equipment, and ensures that all personnel working in his area comply with
POSITION : ELECTRICAL TECHNICIAN (COMM, MAINTENANCE)
COMPANY : QATAR KENTZ
DATE : NOVEMBER 19, 2006 to DECEMBER 27, 2008
JOBSITE : RAS GAS OFF PLANT PROJECT LPG (RLIC-Doha-Qatar)
Duties and Responsibilities:
Testing and commissioning of substation switchgear and switchboard, rack in and rack out
position 11 kv,6.6kv and 690 v substation, testing and commissioning of power transformer
from high to low voltage, IR test, each unit protections, ratio, polarization index and zero
sequence test. Testing and commissioning of protection, Rtd module pt 100 relay,
multifunction numerical relays, distance current differential, auto-reclose, bus bars
impedance, breaker failure, motor and generator protection. Testing of external tripping,
upstream and downstream, Functional check of LTMR { Tests T } protection relays, Set up
parameters, Verify input and output, test local start and stop, remote start and stop and test
all the protection setting. Testing of NER { I Guard } sigma monitoring, sepam series protection
relay and motor control station. Setup VFD parameters and conduct functional check, Repairs
and troubleshooting, Testing of current transformer, micro logic test, VFD’s capacitor bank,
current injection and bus duct test, Includes also transformer, winding temperature test,
pressure { SF6 } and interlocking system and synchronization check operation. Testing and
trouble shooting of profibus and modbus. perform also operation and maintenance job, Q,A,
and Q.C. works, punchlist, lock out-tag out and barricade and preparation of test plan,
schedules, test reports,6Q’s and 7Q’s coordination with vendor and contractors.
POSITION : ELECTRICAL TECHNICIAN (COMMISIONING-START-UP)
COMPANY : QATAR KENTZ
JOBSITE : Dolpin Onshore gas processing and compressing facilities
Oil and Gas (Doha Qatar Ras Laffan)
Duties and Responsibilities:

4. Loop check, Functional Test of all Switchgear LV,HV and MCC cubicles, Trans former, Ups and
all Motors and protection Relays, protective Devices and Circuit Breakers, { ABB REM &
Protection Relays, MCU Areva Switchgear, Siemens VFD. Carry out Proper and Safety Isolation
& De-Isolation { LOTO } in the Plant for Low and High Voltage Switch Gear. Conduct
Preliminary inspections upon completion of works before commissioning. As built and
updating of issued drawing includes single line diagram. Inspection of installed MCC, motor,
switchgear, VFD’s { ALLEN Bradley },power panels, electrical equipment’s, power transformer {
HV/MV/LV } and submit sufficiency quality report to QC manager. Also diagnose repairs,
troubleshooting and modification testing and carry out site Pre commissioning
/commissioning of electrical equipment (132kv,33kv,11kv,6.6kv, 415v transformer,
switchgear and motor), distribution panels, lightings, devices and HV-LV cables and leading to
energization of electrical equipment, attending and inspection of punch list for satisfactory in
compliance with the standard, test and safety procedure.
POSITION : ELECTRICAL TECHNICIAN (COMMISIONING)
COMPANY : BECHTEL
DATE : August 08, 2004 to September 23, 2006
JOBSITE : LNG Liquid Natural Gas
EG Malabo Equatorial Guinea Africa
Duties and Responsibilities:
Test perform and conducted are Insulation Resistance, Winding Resistance, TTR and P.I. test,
AC/DC High Potential Testing, Primary and Secondary current injection, ducter test,
polarity/ratio, burden test of CT/VT, Circuit Breaker/contactor timing test and earthing test.
AREVA/ABB, SIEMEN Switchgear inter cubicle wiring checks & troubleshooting to verify
compliance to design drawings. Oil filled type power transformer testing. This includes oil
filtering and conditioning to meet dielectric breakdown requirement. Motor
uncoupled/coupled run test (take reading on motor starting current, motor vibration (vertical
& horizontal), bearing temperature of 415V, 6.6kV and11kV motors. That includes operational
and functional test on the motor control. Perform pre-commissioning and commissioning
procedure on medium voltage MCC switchboard and auxiliary control circuit. Knowledgeable
in the cable fault troubleshooting using TDR and cable locator. Responsible for daily report,
preparation and accomplishment of required documents such as check and test sheet records
and punchlist items and coordinate with client to witness the inspection/testing activities and
obtain approval /signature. Operation of equipment’s such as; Programma primary/secondary
current injection set, sverker 760, CSU 600AT, Hipotronics, VLF, and Biddle AC/DC Hipot test,
Megger ( CTER, MPRT, OTS 100A/F),DLRO micro-ohmmeter, Vanguard Inst. CT 3500, Fluke,
etc.
POSITION : ELECTRICAL TECHNICIAN (COMM. MAINTENANCE)
COMPANY : ENEL POWER
DATE : May 14, 2002 to June 04, 2004
JOBSITE : DEWA-Power Plant
Jibel Ali Dubai, United Arab Emirates

5. Duties and Responsibilities:
Commissioning and testing of distribution board, control and panel board and wiring of
equipment like motors, switch gears and transformer, wiring of lightings, power out let,
switches and control, fixing of some instruments like fire alarm, smoke detector, level, flow
and pressure transmitter and level switches, cable pulling loop and continuity checking
voltmeter and merger check, terminator, testing and commissioning, sometimes maintenance
of backup power generators, supply to motors, replacements of breakers, fuses, contactors,
grounding installations and each measurements, point to point resistance check, motor
jogging and motor run testing, lock out and tag out works and troubleshooting, Involved and
performs duties on modernization of various project of the company which deals on
engineering and technician works, from constructions to commissioning tasks. Have
knowledge on electrical drawings and involved in start-up commissioning and maintenance.
Involved and part of electrical equipment’s and cables installation testing, IR test, Hi-pot, duct
test, current injection, pressure test, protection check and loop check, Start-up
commissioning, troubleshooting, repairs and modify impedance check, primary and secondary
current injection test, motor dry run and load test, phase rotation check, neutral earthing
resistor check, micro logic functional test, upstream and downstream, external tripping
protection test, Rack in and Rack out of 11kv,6.6kv,690v,and 415v switchboard, lock out tag
out and barricades and heat trace testing. Inspect and monitors daily work progress with a
quality and safety jobs assigned. Testing and commissioning MCC,UPS,PLC,ATS and AVR. Fire
alarm lighting fixture testing and photocell sensor. Assist to supervisor on maintaining
appropriate standards of discipline and behaviors.
EDUCATIONAL BACKGROUND:
Undergraduate (Electrical Engineering)
VOCATIONAL COURSE:
ELECTRICAL TECHNOLOGY (NC-2)
TECHNICAL TRAINING ATTENDED
MERALCO FOUNDATION INSTITUTE
Pasig City, Philippines
Advanced Industrial Motor Control Hands on train on the Basic Programmable Logic Controller
(PLC) equipment programming( Siemen s7200),Variable Frequency Drive (VFD) Programming.
ADDITIONAL SKILLS:
Driving – with Philippines License.

6. SEMINARS ATTENDED:
H2S Gas Training
Permit To Work (PTW)
• Safety Task Assignment (STA)
Confined Space Entrance
Lockout Tagout (LOTO)
PERSONAL INFORMATION:
Date of Birth : March 15, 1966
Age : 48 y/o
Marital Status : Married
Nationality : Filipino
Gender : Male
CHARACTER REFERENCE:
.
CLIFFORD YAMUAH
Electrical Specialist
Of sherritt ambatovy
Email add:oilgas@live.ca
NORDIEL BOMBALE RODRIQUEZ
Electrical Specialist
Of sherritt ambatovy
Email add:nbombale@gmail.com

7. SEMINARS ATTENDED:
H2S Gas Training
Permit To Work (PTW)
• Safety Task Assignment (STA)
Confined Space Entrance
Lockout Tagout (LOTO)
PERSONAL INFORMATION:
Date of Birth : March 15, 1966
Age : 48 y/o
Marital Status : Married
Nationality : Filipino
Gender : Male
CHARACTER REFERENCE:
.
CLIFFORD YAMUAH
Electrical Specialist
Of sherritt ambatovy
Email add:oilgas@live.ca
NORDIEL BOMBALE RODRIQUEZ
Electrical Specialist
Of sherritt ambatovy
Email add:nbombale@gmail.com