1. QUALITY CONTROL ENGINEER
(SPECIFICATION CODES – PROCEDURES – ITP – NDT TECHNIQUE)
NADER MOHAMMED RIZQ
17 SAMMY RAOUF ST. MIAMI ALEXANDRIA
002-01063794528 / 002-01147222950 /002-03-5774305
002-03-5577930
Ndr_mohammed@yahoo.com
Nationality : EGYPTIAN
Date of birth: 06 / 11 / 1981
Marital status: MARRIED
Military status: FINAL EXEMPTED
Objective  • Total of Around 11 years experience in Inspection, Quality Control and Non Destructive Testing of
Pressure Vessels, Heat Exchangers, Plant Piping and Structures for Petrochemical Plants, Thermal
Power Stations, Refineries, Oxygen Plant & Steel Plant, Cross country Pipelines, Oil & Gas Pipeline
(Offshore & Onshore) Projects and Storage Tanks.
 Leading the inspection personnel to achieve the targets and plan to maintain the integrity of piping
and equipments by allocating appropriate personnel to suit the requirement.
 Review / Preparation of Quality Assurance Plan (QAP) to meet ISO 9000 standards. Follow up a
corrective action to improve the Quality system.
Review / Preparation of Quality Control Procedures, WPS, PQR and Welders Qualification Test.
Review / Interpretation of Radiographic films of weld as per the applicable codes.
 Witness of all Destructive testing, Chemical testing, Painting / Coating, Holiday test, Hydrostatic test.
 Co-ordination with third party inspection / client as per the contractual requirement.
 And also Worked as Client/Owner Representative, Project Management Consultant (PMC) & Third Party
Inspection (TPI).
Summary of Offshore Experience
Total of Around 6 Years Continuously Working in Offshore - Quality Control & Inspection of Welding,
AUT, Non Destructive Testing and Painting / Coating of Pipe Lay Installation, Jacket Installation, Top
side and Hookup Projects.

2. NADER MOHAMMED RIZQ
2 
Inspection Activities includes but not limited to in Offshore as Follows
Automated Ultrasonic Testing (AUT)
 Review / Verify AUT System Verification Documents and Inspection Personal Qualifications.
 Verify all documentation to execute the work such as approved AUT procedures.
 Check the AUT Calibrations (Cal. IN & Cal. OUT) and as per the Procedures.
 Online Monitoring and Evaluate the Scan result of Girth Welds Using Tomo Viewer.
 Witness & inspection of AUT, MUT activities, Review of AUT, MUT Documents & Has the
authority to reject defective work and Carried out the Weekly Auditing.
Welding
 Review the WPS & PQR. Vitness the WPQT & Mechanical Test. Check that all onshore/offshore-related
QA/QC work is carried out in accordance with the approved PQP and Inspection & Test plan.
 Check all documentation to execute the work such as approved welding procedures, Quality Control
procedures, NDT procedures, Codes; standards are available at work site.
 Check that all applicable equipment is calibrated and has valid certification.
 Check installation processes are carried out in accordance with approved procedures & specification &
Inspection and confirmation of welding consumables as per the specifications.
 Witness & inspection of all Welding activity, Review of Inspection Documents & Has the authority to reject
defective work.
Skills  WORD, EXEL, POWERPOINT, INTERNET SERVICE, AUTOCAD, 3D MAX AND
FORTRAN.

3. NADER MOHAMMED RIZQ
3 
Education
ALEXANDRIA UNIVERSITY•
Degree: B.SC. IN ENGINEERING SCIENCE
(MARINE DEPT.& NAVAL ARCHTECTURE)
2004
GRADE :GOOD
 Erosion & Corrosion Protection.
 Surface Preparation methods & standards.
 Surface Contaminants& tests for detection.
 Welding type and procedure.
 Shipyard courses.
 ASNT-TC-1A LEVEL II ULTRASONIC INSPECTION.
 ASNT-TC-1A LEVEL II RADIOGRAPHIC INSPECTION.
 ASNT-TC-1A LEVEL II LIQUID PENETRANT INSPECTION.
 ASNT-TC-1A LEVEL II MAGNETIC PARTICLE INSPECTION.
 Automatic control course.
 Membership in American welding society (AWS) with no. 602311.
 PREPARE API 510 COURSE.
Language
Arabic (Mother Language)
English (SECOND LANGUAGE)
Experience
[Alex petroleum
maintenance
co.]
[from may 2008
until now]
[QA_QC MANAGER]
Construction project:
Responsibilities
As a Welding and NDT engineer.
 APC ASPHALT TANK CONNECTION PROJECT.
 PETROPEL CO. INSPECTION MAINTENANCE FOR
GLYCOLE REGENERATION.
 SURVEY ON AGIBA 16" LINE FROM MELEHA TO HAMRA
PORT INTERNATIONAL.
 SURVEY ON HAMRA OIL TANK.
 INSPECTION MAINTENANCE FOR PETROGAS CO.
SPHERE.

4. NADER MOHAMMED RIZQ
4 
Maintenance project: (ELAB CO. & MIDOR CO.)
Responsibilities
 Plant, welding and NDT inspector engineer in Egypt liner alkyl
benzene ( ELAB ) plant and MIDOR plant( preventive,
corrective and predictive maintenance).
 INSPECTION OF PRESSURE VESSELS, TANKS, TOWERS AND
HEATERS IN ELAB AND MIDOR PLANT.
 Inspection of heat exchanger and air cooler in elab plant.
 Complete internal inspection for tanks.
 Thicness measurement plan for all pipeline in the elab plant.
[Petrol Playem
co.]
[from February
2004 to may
2008]
[Mechanical inspector engineer]
1)
2)
3)
4)
5) ON SHORE WELDING AND NDT ACTIVITIES:
 Follow up PF gasoline reboiler A inspection activities:
- UT thickness measurement to the coils.
- Making Hydrotest to valves.
- Making pneumatic test.
- Making leak test.
 Follow up Wakar gasoline reboiler C inspection activities.
 Follow up PF gasoline reboiler B inspection activities.
 Follow up Temsah gasoline reboiler A inspection activities.
 Follow up Temsah gasoline reboiler D inspection activities.
 Follow up Temsah gasoline reboiler B inspection activities.
- Follow up thermal insulation activities.
 Follow up Temsah gasoline reboiler C inspection activities.

 Making UT thickness measurement to skids (0193-XY-
001,002& 003).
 Making UT thickness measurement to 422-005-FG-3"-B01
 Making UT thickness measurement to 422-005-FG-2"-B01

5. NADER MOHAMMED RIZQ
5 
 Making UT thickness measurement to (fuel gas heater
0420-XY-001) to (0210-XY-006 fuel gas skid)
 Making UT thickness measurement to (420-003-FG-4"-
B01), (420-003-FG-4"-A01)
 Making UT thickness measurement to 420-009-FG-3"-A01
 Making UT thickness measurement for 4" cond. Pipeline
from LTS of PF, Wakar, D1,D2, & D3 to sweet preheated
manifold, 10" cond. Pipe line from sweet preheated
manifold to sweet pre heater and 6" fuel gas pipeline from
36" sales gas line to PF fuel gas skid, T/C fuel gas heater
and T/C fuel gas skid.
 Making UT thickness measurement for (0210-XY-001).
 Making UT thickness measurement for Semman scrubber.
3.
4. OFF SHORE WELDING AND NDT ACTIVITIES:
5.
 UT thickness measurement above risers, flow line of all
platforms and agypode from well head to manifold.
(Temsah 4, TNW2, Darfeel, Port Fouad).
 Flow up the flow line and riser every month.
 Flow up any change in dimension and make as built
drawing onshore and offshore.
 Follow up laying riser and pipe line for PFSW2 egypode.
Note:
 Sometimes mobile not available because I am offshore,
 So, please: leave a voice mail on mobile or send SMS, or send me email.
Availability & Job Requested
 Availability : I am able to start work after 2 weeks from announcement.
 As : Full Time.
 Rank : QUALITY CONTROL ENGINEER.