O SlideShare utiliza cookies para otimizar a funcionalidade e o desempenho do site, assim como para apresentar publicidade mais relevante aos nossos usuários. Se você continuar a navegar o site, você aceita o uso de cookies. Leia nosso Contrato do Usuário e nossa Política de Privacidade.
O SlideShare utiliza cookies para otimizar a funcionalidade e o desempenho do site, assim como para apresentar publicidade mais relevante aos nossos usuários. Se você continuar a utilizar o site, você aceita o uso de cookies. Leia nossa Política de Privacidade e nosso Contrato do Usuário para obter mais detalhes.
This template can be used as a starter file for presenting training materials in a group setting.
Sections Right-click on a slide to add sections. Sections can help to organize your slides or facilitate collaboration between multiple authors.
Notes Use the Notes section for delivery notes or to provide additional details for the audience. View these notes in Presentation View during your presentation. Keep in mind the font size (important for accessibility, visibility, videotaping, and online production)
Coordinated colors Pay particular attention to the graphs, charts, and text boxes. Consider that attendees will print in black and white or grayscale. Run a test print to make sure your colors work when printed in pure black and white and grayscale.
Graphics, tables, and graphs Keep it simple: If possible, use consistent, non-distracting styles and colors. Label all graphs and tables.
What will the audience be able to do after this training is complete? Briefly describe each objective how the audience will benefit from this presentation.
Power line carrier communication(with awesome animation work)
POWER LINE CARRIER
CGI/ECE/ 7TH SEM/15
• TRAINING OVERVIEW
• BASIC PRINCIPAL OF PLCC
• SIGNALS FOR PLCC
• PLCC STATION
• BLOCK DIAGRAM OF
• BASIC COUPLING
• MAINTAINENCE AND
Name Of Industry : Rajasthan Rajya Vidyut Prasaran Nigam
Location: 220KV GSS PREMISES, RIICO INDUSTRIAL
Reporting Officer: A. K. MITTAL
Duration of training : 3rd June to 18th July, 2014
Department of training :Electronics & Communication
PLCC is the method of transmitting information
using power network.
Its equipment are used for point-to-point
communication over high voltage power lines
It’s equipments are used to send/receive
It’s the most economical and reliable method of
communication for medium or long distance.
BASIC PRINCIPAL OF PLCC
The telephone communication system cannot be
directly connected to the high voltage lines so,
we use suitably designed coupling devices for
These usually consist of high voltage capacitor
used in conjunction with suitable line matching
unit (LMU) for matching the impedance of line
to that of the coaxial cable connecting the unit
to the PLC transmiter-receiver equipment.
SIGNALS FOR PLCC
The signal that can be transmitted over the PLCC
Speech signal (300-2000Hz )
Data signal (2000-3000Hz)
• PLCC station
• Line matching Unit
• Earth Switch
• Lightening Arrestor
• Wave Trap
• Co axial Cable
• It is the station where (modulation)Transmission ,
Receiving (Demodulation ) , Amplification and
Filtration are performed.
• Transmitter :
• It is Control Voltage transformer/ Coupling capacitor.
• This is used for blocking the high voltage entering
to the PLCC equipment.
• This is used at the time of maintenance of LMU.
• Used to protect the system from the
damaging effect of lightening.
• It works as an insulator between light
and the power line.
Co axial Cable
• This is used for inter connection
between PLCC & L.M.U for carrying the
high frequency signal.
Line Matching Unit
The out-put of PLCC is connected to the matching unit
before the power lines to achieve the proper impedance
matching and protection in between PLCC Equipments
and power line.
• Consists of a number choke
coils connected in series.
• It is connected in series with the
power line and prevents carrier
entering to the power
• Offer negligible impedance to
power frequency & high
impedance to carrier frequency.
BASIC COUPLING ARRANGEMENT
The power frequency and radio frequency currents are
sorted by this arrangement .
Carrier currents are prevented to enter station bus by
wave trap & power frequency current is blocked by
coupling capacitor, from the PLC equipment.
Hence we get power current at the bus & carrier current
at PLC equipment.
• PLCC work on rectified AC or main supply, when supply
goes off, we make use of a device for proper functioning
of PLCC called battery charger.
• This is the device that provide supply to the PLCC
equipment for uninterrupted working.
• It provide DC to the panel by battery.
Maintenance & Fault Tracking
• FAULT ANALYSIS
In fault analysis the faulty devices are checked in
this serial or manner:-
1. Telephone or tale operation signal
2. Cabling low frequency circuit or DC power supply
3. PLC equipment
4. HF transmission path
MAINTAINANCE AND FAULT TRACING
1. The control circuit boards should be inserted far
2. The charger should be switch off once in every
3. The battery terminal should be connected first and
the AC input after that.
4. All mounting bolts should be checked before
No separate wires are needed for
Both communication and power transfer can
be possible on same circuit.
Power lines provides the shortest route
between the power station.
Lower attenuation over long distance.
Implementation cost is reduced.
Reflection are produced on spur lines connected
to high voltage line. This increased attenuation
and create other problem.
High voltage lines have transformer connections,
which attenuate carrier currents.
Noise introduced by power lines is far more than
in case of telephone lines.
• PLCC is mainly used for telecommunication, tele-protection
and tele-monitoring between electrical
substations through power lines.
• In a PLCC system the communication is established
through the power line.
• The carrier frequency range is allocated to include
the audio signal, protection and the pilot frequency.
The Training was based on communication over
existing power line.