Wireless Video Architecture projects

1. Public Safety
Broadband
Wireless Video
Surveillance Camera
system catalog

2. PSB Wireless Video Surveillance Camera System catalog
Compact easily repositionable design 4.9 Optional Removable 4 hr. UPS
Camera, Wireless, NVR, & Power supply all Omni Under 10lbs
integrated into one compact enclosure under 20lbs Antenna
Quick Disconnect Water
High-Flow Blower Cooling 20-122° F Tight connector for 24VDC
battery Backup Input or AC
Power Input
Water Tight External Ethernet Port with
POE power for AXIS Q1755 Fixed camera
or External Wireless Routers (Cisco,
Proxim, Motorola, or SkyPilot).
Wireless AXIS Q1755 AXIS Q1755
4.9 GHz Wireless AP/Client 802.3af Power over Ethernet
City Wide 4.9 wireless AP
Evidence Quality Video Storage Evidence Quality Video Storage
2.3 days of storage 2.3 days of storage
@ 12fps 1280x720 @ 12fps 1280x720

3. Available field upgradable options, integrated into camera enclosure
High-Flow Blower Cooling 20-122° F Optional Removable 4 hr. UPS
Under 10lbs
Thermal Electric Cooling 20-150° F
Optional AgentVI Video Analytics at the edge
Optional Self-test with automatic reboot
Optional POE for external equipment
Optional AXIS 233D IP camera
Optional built In 5 Port Ethernet Switch
Optional Bosch Encoder with hard drive
Optional Analog Cameras
Optional 2.4 or 4.9 WiFi AP/Client
Optional Wireless CPEs
Proxim AP4900 Mesh AP/Client
Proxim MP11 Subscriber unit
Optional Fiber Interface
Optional 1 TB RAID Network Video Recorder
Optional 32GB of Video Storage at the edge
Optional Cellular Router
Optional Device Serial Server
Optional SNMP Alarm & Control module
8 Analog/Universal Alarm Inputs
2 Control outputs
RS485/232 Serial Port Modbus RTU option
 External Sensors
 Motion detectors
 Intrusion sensors
 Door Alarms
 Air Conditioning control
 Hazardous gases sensors
 Biological sensors
 Traffic control sensors
 Temperature sensors
 Vehicle Detection sensors
 1,000s of Modbus smart Wireless AXIS Q1755 AXIS Q1755
4.9 GHz Wireless AP/Client AC or 802.3af POE power
sensors
City Wide 4.9 Evidence Quality Video Storage Evidence Quality Video Storage
Wireless AP 2.3 days of storage 2.3 days of storage
@ 12fps 1280x720 @ 12fps 1280x720

4. Flexible Video Surveillance
Configuration 1
PSB-WVSCS-PTZ Camera system Configuration 2
PSB-WVSCS-PTZ
PSB-4.9-CPE-AP
AXIS 7401 Encoder AXIS 7401 Encoder
Analog Camera Analog Camera
Configuration 7 4.9 WiFi AP/Client
PSB-FIX-4.9-CPE-AP
Fiber
Drop
Wireless AXIS Q1755
with built in 4.9 GHz Vendor X
Wireless AXIS Q1755
Wireless AP/Client City Wide with built in 4.9 GHz
4.9 Wireless AP Wireless AP/Client
Configuration 8
PSB-FIX-AC-802.3af
Configuration 3 Configuration 4
PSB-WVSCS-PTZ PSB-WVSCS-PTZ
PROXIM-AP4900 PSB-SWITCH-POE-3
Ethernet Switch
AXIS 7401 Encoder AXIS 7401 Encoder
AXIS Q1755
Analog Camera Analog Camera
AC or 802.3af POE power
Proxim AP4900 Vendor X POE
Optional Vendor X
POE to power
collocated APs Fiber
Drop
Proxim City Wide Vendor X
Wireless AXIS Q1755 City Wide
4.9 Wireless with built in 4.9 GHz
Mesh AP 4.9 Wireless AP Wireless AXIS Q1755
Wireless AP/Client
with built in 4.9 GHz
Wireless AP/Client
Configuration 5 Configuration 6
PSB-WVSCS-PTZ
PSB-WVSCS-PTZ
PSB-4.9-CPE-AP
PSB-POE-3
PSB-SWITCH-POE-8
Ethernet Switch
AXIS 7401 Encoder
AXIS 7401 Encoder
Analog Camera
Optional 803.2af
803.2af POE
POE to power Analog Camera
4.9 WiFi AP/Client collocated fixed
cameras Vendor X POE
Optional Vendor X
POE can power
collocated APs
Vendor X Vendor X
Wireless AXIS 802.3af Power Wireless AXIS Q1755
City Wide City Wide with built in 4.9 GHz
Q1755 with built in over Ethernet
4.9 Wireless AP AXIS Q1755
4.9 Wireless AP Wireless AP/Client
4.9 GHz Wireless
AP/Client

5. Wireless Video Surveillance Camera system Wireless Network Topology
City Wide 4.9
Wireless AP City Wide 4.9
Wireless AP
Video can be stream to
Police Vehicles in the
area using low cost 4.9
card bus radios install in
laptops
Optional 802.3af
Power over Ethernet
AXIS Q1755
Optional POE Power
supply and Ethernet
switch built in, which
can power collocated
APs or Cameras
Optional built in 4.9
GHz AP, which can
provide a backup
connection to the
fiber for other local
wireless cameras, if
the City Wireless
network is out of
range.
Fiber Drop
Optional Wireless
AXIS Q1755 with built in
4.9 or 2.4 Wireless AP/Client,
City Wide 4.9
Wireless AP
Optional Portable Wireless Video
Surveillance Camera system with
built in 4.9 GHz & 5hr battery

6. Axis H.264 Q7401 Video Encoder
The Public Safety Broadband Wireless Video Surveillance camera system (Model PSB-WVSCS-TEC) is equipment with an AXIS Q7401 Video
Encoder. AXIS Q7401 Video Encoder is a high performance, single channel solution that integrates an analog camera into an IP-based video
surveillance system. With outstanding video processing capabilities, AXIS Q7401 delivers superb video quality and significant savings in bandwidth
and storage. The AXIS Q7401 offers the highly efficient H.264 video compression, which drastically reduces bandwidth and storage requirements
without compromising image quality. The encoder can stream multiple H.264 streams. Motion JPEG is also supported for increased flexibility. AXIS
Q7401 can deliver multiple, individually configurable video streams simultaneously at full frame rate in all resolutions up to D1 (720x480 in NTSC,
720x576 in PAL). This means that several video streams can be configured with different compression formats, resolutions and frame rates for
different needs. AXIS Q7401 includes intelligent capabilities such as enhanced video motion detection, active tampering alarm and audio detection.
The encoder’s external inputs and outputs can be connected to devices such as sensors and relays, enabling the system to react to alarms and activate
lights or open/close doors.
32GB of local Network video storage at the edge
The PSB 32GB of local Network video storage at the edge allows you to store evidence quality video at the edge at 30fps, 4CIF, H.264 while
streaming a second H.264 video stream at a much lower frame rate and resolution of 12fps, 2CIF over the wireless network, back to the NOC. This
allows you to scale your camera network up to hundreds of camera without running out of bandwidth on your wireless network. The evidence
quality video on the edge, can be uploaded at any time using FTP and then loaded into the Insight Video Net (CMS) Central Management System,
which is a powerful software solution that manages critical digital evidence and automates video filing and storage across a wide area network. The
frame rate and resolution for the wireless video stream can be easily increased with a few key strokes, when needed to view a live incident at a higher
frame rate and resolution.
When the network connection from the Image Server to the camera is not operational, the Camera-Sub-System continually stores video at the edge
for up to 7 days at H.264, 30fps, 2CIF. When the network connection is back up, this stored video at the edged can be uploaded using FTP.
See the chart below for the number of days of video storage for 32GB of video storage at the edge. The bandwidth required for 50 AXIS 233D
cameras configured for evidence quality video of MPEG-4, 30fps, 4CIF is 130 Mbits. When using local video storage you can configure the AXIS
Q7401 to stream video back to the server at H.264, 12fps, 2CIF, which requires a total bandwidth of 12 Mbits. The bandwidth is reduced by 118
Mbits as compared to an AXIS 233D solution. The total Disk Storage for 30 days of video is reduced by 36 TB.
Reduced bandwidth requirements for the AXIS Q7401 H.264 Video encoder as compared to the AXIS 233D
Compress Bandwidth Disk space Storage
Model Type fps Res. Comp Image scenario Bandwidth for 50 300 cameras Days
level cameras for 30 days for 32GB
AXIS 233D MPEG-4 12 2CIF 10 Intersection (daytime) 0.67 Mbits 34 Mbits 9 TB
AXIS 233D MPEG-4 12 4CIF 10 Intersection (daytime) 1.3 Mbits 65 Mbits 20 TB
AXIS 233D MPEG-4 30 2CIF 10 Intersection (daytime) 1.3 Mbits 65 Mbits 20 TB
AXIS 233D MPEG-4 30 4CIF 10 Intersection (daytime) 2.6 Mbits 130 Mbits 39 TB
AXIS Q7401 H.264 12 2CIF 10 Intersection (daytime) 0.23 Mbits 12 Mbits 3 TB 14.0 days
AXIS Q7401 H.264 12 4CIF 10 Intersection (daytime) 0.46 Mbits 22 Mbits 9 TB 6.8 days
AXIS Q7401 H.264 30 2CIF 10 Intersection (daytime) 0.45 Mbits 23 Mbits 7 TB 7.0 days
AXIS Q7401 H.264 30 4CIF 10 Intersection (daytime) 0.91 Mbits 46 Mbits 14 TB 3.4 days
Samsung SCC-C6403 32X analog camera option
The SCC-C6403 Pan-Tilt-Zoom camera from SAMSUNG Electronics is a perfect solution for your advanced surveillance needs at a competitive
cost. The camera contains a 32X built-in optical lens and 10X digital zoom to offer up to 320X zoom capability. The dome includes 350° panning
and is the perfect choice for pole mount, wall mount and corner mount applications. Other features include true Day/ Night Function with removable
mechanical cut filter, motion detection and auto white balance. Minimum Scene Illumination: 0.005 Lux @ 15IRE, Sens-Up x128 , Color; 0º ~ 180º
Tilting.
Samsung SCC-C6407 32X analog camera option
The SCC-C6407 is the ultimate speed dome with all the expected innovative features in most surveillance systems. This product contains a 32X
built-in optical lens and 10X digital zoom to offer up to 320X zoom capability. The camera can detect an object at great distance with high clarity via
the auto focus function. The Day/Night function allows the camera to automatically switch from color mode to black and white mode according to
the light conditions to display the best picture quality. The camera also employs a WDR (Wide Dynamic Range) function that provides clear images
even under severe backlight circumstances where illumination intensity can vary excessively. Key Features: 1/4 Inch Ex-View HAD CCD; Minimum
Scene Illumination: 0.0005 Lux Color/ 0.00005 Lux B/W @ 15IRE, Sens-Up x160; DSP (Digital Signal Processing); 360º Panning, 0º ~ 180º Tilting;
8 Alarm Inputs, 3 Alarm Outputs
Samsung SCC-C7478 36X analog camera option
The SAMSUNG Electronics SCC-C7478 camera is a Power Zoom camera systems which excel in sharpness and high resolution. The SCC-C7478
also uses the unique True Wide Dynamic Range to resolve clear images through both glare and shadow. This camera system features a 36x Auto
Focus Optical lens and 12x digital zoom combining to provide 432x zoom. Key features: 1/4” 410K/470K Pixels ExView-HAD Progressive Scan
CCD; Day/Night function (Moving Filter); 360° Endless PAN (Slip-ring), 0~180° Tilt Vector Driving (Pan/Tilt operation
simultaneously)

7. Pelco Spectra IV 35X Day/Night analog camera option
The Spectra IV SE dome drive’s unique integrated optics package incorporates many advanced features that allow the system to produce high
quality video in the most difficult environments. The Spectra IV feature LowLight™ technology allowing the cameras to compensate for scenes
where minimal light is present. The 35X day/night camera features built-in motion detection and advanced 128X wide dynamic range that enables
the system to compensate for scenes where dramatic contrasts in lighting are present. Electronic image stabilization digitally reduces blurring of the
camera image due to vibration caused by external sources such as wind and traffic. Spectra IV variable speed capabilities range from a smooth, fast
pan motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree per second. The system is capable of continuous 360 degrees rotation
and has an “auto flip” feature that allows the dome to rotate 180 degrees and reposition itself for uninterrupted viewing of any subject that passes
directly beneath the dome.
Optional AXIS 233D 35X IP camera
AXIS 233D Network Dome Camera provides exceptional features such as progressive scan, 35x optical zoom, and fast and precise pan/tilt
mechanics for superb performance and image quality. AXIS 233D is designed for use in demanding security installations such as airports, casinos,
stadiums and ports.
AXIS 233D’s powerful zoom capabilities (35x optical and 12x digital zoom) enable distant objects to be monitored in sharp detail. Its unique area
zoom feature enables immediate zoom to any desired part of a scene.
Other factors also contribute to the camera’s high image quality. They include progressive scan, which provides full resolution images of moving
objects without distortion; Electronic Image Stabilizer (EIS), which reduces the effect of vibrations caused by traffic or wind; and 128x Wide
Dynamic Range (WDR), which ensures high-quality video even in complex lighting conditions.
AXIS Q1755 fixed wireless camera enclosure
The AXIS Q1755 outdoor environmental housing comes with a wall or pole mounting bracket. The enclosure can also
house several other fixed cameras. The unit can be equipped with either an AC to 12VDC power supply or powered by
802.3af POE when using an 802.3af compatible camera. Includes either a 2.4 or 4.9 wireless AP/Client built in module.
This built in wireless Client can interface to several wireless platforms that have a standards base WiFi 802.11 Access
Point built into their solution, including Cisco, Tropos, Proxim, Skypilot, BelAir Networks and others. The wireless
module also has a built in 2.4 or 4.9 Access Point, which allows local wireless connection to the camera from Police
Vehicles’ wireless clients. The wireless module uses a high power 400mW radio to extend its coverage. Includes
integrated Omni antenna. The fixed camera enclosure is also available without the wireless module and with 802.3af POE
connection, which allows you to connect collocated Fix cameras directly to a PTZ camera enclosure.
Bandwidth requirements for the AXIS Q7155 H.264 fixed camera
Bandwidth Disk space Storage
Compress Comp for 300 300 cameras Days
Model Type fps Res. level Image scenario Bandwidth cameras for 30 days for 32GB
AXIS Q1755 H.264 12 800x450 10 Intersection (daytime) 0.53 Mbits 159 Mbits 48 TB 5.90 days
AXIS Q1755 H.264 12 1280x720 10 Intersection (daytime) 1.30 Mbits 390 Mbits 122 TB 2.30 days
AXIS Q1755 H.264 12 1920x1080 10 Intersection (daytime) 3.0 Mbits 900 Mbits 276 TB 1.02 days
AXIS Q1755 H.264 30 1280x720 10 Intersection (daytime) 2.7 Mbits 810 Mbits 245 TB 1.14 days
AXIS Q1755 H.264 30 1920x1080 10 Intersection (daytime) 6.1 Mbits 1,830 Mbits 554 TB 0.50 days
Optional Ground Test Remote Copper Theft Monitor
Ventev’s GTRM 100 is a small, easy-to-install monitoring device that connects to your site’s grounding system creating its own monitoring circuit.
When the circuit is interrupted, an alert message will notify the NOC through an Ethernet or contact closure connection. The GTRM 100 was
specifically designed to be a smart, simple, economical, and reliable monitoring solution to increase the site manager’s awareness of potential
atastrophic failures. Copper theft remains an operational threat and the GTRM 100 is an elegant solution to an expensive problem.
Ground Test Remote Copper Theft Monitor
 Email Alert Notification
 SNMP Alert Notification
 Ability to monitor five separate grounds
 Clip-on toroid ground
 Ability to monitor five ground location
 IP addressable device which connections to camera enclosure external Ethernet connector
 Web based interface to configure individual devices remotely or locally

8. Optional AgentVi Video Analytics at the edge
Agent Vi delivers the next generation in enterprise video analytics software solutions for improved security, business intelligence and operations.
Agent Vi dramatically lowers installation and operational costs by minimizing hardware and network bandwidth requirements, delivering cost effective, next generation
video analytics to customers facing a diverse set of surveillance and operational challenges.
Agent Vi addresses public safety and operations, immediately reporting:
 Person walking on rail/subway tracks or entering a tunnel
 Vehicles blocking railroad crossings or parked in fire lanes
 Vehicles stopped in time-sensitive or restricted zones
 Lines that exceed thresholds at ticketing and check points
 Slip-and-fall detection to identify potential pedestrian injuries, fraudulent claims and liability issues
 Automatic PTZ tracking
 Intrusion detection along perimeters and gates
 Vehicles traveling in unauthorized directions
 People or vehicles attempting to access restricted areas
 Tailgating through secure access areas and parking garages
 People loitering in an area of interest
 Objects left unattended in or near sensitive areas
 Alert to camera blocking

9. Optional Built in 2.4 or 4.9 Wireless AP/Client
The PSB wireless camera systems have an optional built in 2.4 or 4.9 Wireless AP/Client. This built in wireless Client can interface to several
wireless platforms that have a standards base WiFi 802.11 Access Point built into their solution, including Cisco, Tropos, Proxim, Skypilot, BelAir
Networks and others. The wireless module also has a built in 2.4 or 4.9 Access Point, which allows local wireless connection to the camera from
Police Vehicles’ wireless clients. Other Fixed or PTZ wireless cameras in the area can also connect wirelessly to the build in Access Point, to extend
a Fiber connection. The wireless module uses a high power 400mW radio to extend its coverage. Includes integrated Omni antenna.
Other optional wireless interfaces
The Public Safety Broadband Wireless Video Surveillance camera system has several optional built in Wireless Client interfaces to multiple
industry-leading wireless platforms including SkyPilot Networks, Firetide, InfiNet Wireless, BelAir Networks, Cisco, Mesh Dynamics, Tropos,
Nortel, RoamAD, Meshcom, and Proxim. Integrated Wireless board options available for Proxim AP4900 Mesh AP/Client, Proxim MP11 Subscriber
unit. Integrated optional POEs that support multiple industry-leading external wireless routers and IP cameras.
Optional built in Self-Test with Automatic-Reboot module
The self-test with automatic-reboot module uses a heart-beat management program that resides on the server in Network Operation Center. This
program provides the Camera-Sub-System a heart beat by sending commands to the Video-Encoder or IP-Camera output relay over the wireless
network. The Encoder or Camera’s output relay provides a heart-beat to a failsafe device inside the camera enclosure. If this heartbeat fails because
of a Video-Encoder, IP camera, Ethernet-Switch, or Wireless-Router lockup, the failsafe device resets these components automatically to bring the
camera system back on line within seconds of a component lockup.
Optional built in Camera System Alarm module
The alarm module monitors the temperature and humidity inside the camera enclosure to identify problems before there is a failure. With the
optional UPS, the AC power is also monitored. If the Temperature/Humidly threshold are exceeded or there is AC Power failure, a alarm is sent to
the Video Management system through either the Video Encoder or IP Camera alarm inputs.
Optional 1-TB RAID Network Video Recorder computer module
Allows local Video storage at the camera site. The optional 1-TB RAID Network Recorder module includes a 1.6 GHz Intel Atom computer that
supports several Network Video Recording software. The 1-TB RAID Network Video Recorder can be install in a Dotworkz D2 or D2 enclosure.
The computer module can support up to 4 cameras. The computer comes with XP-Pro loaded, and also supports Linux, Win CE and XPe. The
computer has two SATA 3/Gb/s 500GB hard drives mounted in a removable RAID case. The drives can be configured for several RAID
configurations including Mirror, which provides a complete backup of all stored video. When configured for Mirror, there is 500GB of video
storage available, which can store more than 30 days of video at H.264/30fps/4CIF. When configured for Span, there is 1TB of video storage
available, which can store more than 60 days of video at H.264/30fps/4CIF. In the event of a wireless PTP link failure or power outage, the video
storage can be retrieved by removing the drive case from the camera enclosure. The video can also be retrieve at the camera site from the ground by
accessing the Camera-Sub-System’s optional built in 2.4 or 4.9 GHz router and downloading the video to your laptop.
Genetec Omnicast-Standard pre-installed on 1-TB RAID Network Video Recorder
Genetec Omnicast Standard remote Archiveer server pre-installed on the 1-TB RAID Network Video Recorder computer module, installed in camera
enclosure. IP Video Surveillance for fewer than 50 cameras. With Omnicast’s Standard video surveillance package, you get only what you really
need. You get a powerful and reliable video surveillance system that works off one server, with just the right features. You get a surveillance
system that lets you easily upgrade from analog to IP, one camera at a time. You get an IP surveillance system that allows you to keep existing
hardware and leverage your infrastructure. When your business grows beyond 50 cameras, your solution is future-proof. You will be able to simply
change your license for an Omnicast package that better meets your growing needs.
Genetec Omnicast-Pro pre-installed on Dell PowerEdge T320 Server
Your video surveillance needs are not overly extensive. But you still want a reliable and flexible solution that will support your security camera
count. The Omnicast Pro package is designed for you. An Omnicast Pro video surveillance system offers you the very best video surveillance
features from Genetec, without the added scalability and redundancy features that you don’t need right now. Get a user-friendly solution that
supports up to 100 cameras. If you want to move to an Omnicast Enterprise package later, it’s easy. No new software is installed, just a simple
license change.
Tower computer:
 Dell PowerEdge T320 Server
 Intel Xeon E5-2430 2.20GHz
 8GB of RAM
 Microsoft Small Business Server 2011
 Raid controller
 2 each 500GB hard drives
 DVD ROM Drive

10. Optional SNMP Alarm Monitoring and Control module
Public Safety Broadband has design an optional custom SNMP Remote Monitoring and Control solution integrated into
the camera enclosure, which can monitor components of the Camera sub-system or external sensors.
- Failure notifications are via Email, SNMP traps or HTTP Get.
- Web interface including user HTML wrapper & CGI processing
- User programmable via Script Basic
- Data Trending, Plotting
- Template or rule based alarm processing with email notification and or I/O activation in response to events
- Interfaces to multiple sensors: Hazardous gases sensors, Biological sensors, Traffic control sensors, Radar speed sensors, and Perimeter
Violations sensors.
- 8 inputs which accept analog input form thermistors or 0-10V sensors, or discrete inputs from dry contacts
- 2 Discrete relay outputs
- Interfaces to multiple sensors: Motion detectors, Intrusion sensors, Door Alarms, Hazardous gases sensors, Biological sensors, Traffic
control sensors, Vehicle Detection sensors, and many other sensors.
- Optional RS-485/232 Serial Port Modbus RTU, which provides an interface to Power Meters, Flow Meters, Air Conditioning control or
any other smart sensors that communicates with Modbus protocol.
We also offer an optional SNMP network management solution, which is integrated with the SNMP Remote Monitoring
and Control solution inside the camera enclosure. This SNMP network management solution can reside at the Area
Station control room or at the vendors location that is providing the management and maintenance of the LAPD network.
In addition to monitoring the SNMP Remote Monitoring and Control solution inside the camera enclosure, this solution
also provides the following features:
 Advanced fault management which minimizes equipment downtime
 Inventory Management provides configuration of each Camera Sub-system i.e.: License info,
installed software, installed options
 Tended Performance, Status, and Service monitoring
 Built-in Reporting and Graphing
 Application Monitoring
Optional Network Device Serial Server
- Enables network connectivity to access, monitor and control any City Wide equipment, which is equipped with a
Serial-Port.
- RS-232, RS422, RS-485 serial support
- Configurable via internal web server or Telnet
- In modem emulation mode, which replaces dial-up modems.
- Windows COM Port Redirector software simplifies the integration process by extending the functionality of
(serial) COM port-based Windows applications.
Optional UPS module
The optional UPS module is integrated with the camera enclosure. The removable UPS module slips in behind the
camera and can be easily removed by disconnecting the quick discount connectors. The UPS module provides 4 hours of
backup power for the Camera, Video Encoder, SNMP Monitor and Video Network Recorder. The 4 hour UPS module
weigh less than 10 lbs.
Optional Portable Wireless Video Surveillance Camera system
The PSB light weight Camera System has an optional integrated 24VDC UPS which can
power the camera in a portable deployment for up to 5 hours. The Camera-Sub-System can
easily be mounted to a tripod. The Camera System also has an optional 3G Router for portable
applications. Two fixed IP camera can also be installed on the tripod. The totally integrated
wireless camera weights less then 20lbs. With the combination of the 4.9 GHz Wireless mesh
router and the Network video recorder, the system provides a complete self-sustained video
surveillance system with local access.

11. Optional built in 3rd party POE with Ethernet switch
The optional built in POE power supply with 5 port Ethernet switch, allows you to power collocated wireless CPE
equipment or 802.3af fixed cameras from the PTZ camera enclosure. The camera mounting bracket also accommodates
the mounting of Wireless proprietary CPEs from multiple industry-leading wireless platforms including SkyPilot
Networks, Firetide, BelAir Networks, Cisco, Tropos, Nortel, and Proxim.
Other Options
The PSB wireless camera system also supports several other optional modules i.e.: Cellular Router module; Fiber
interface module; License Plate Reader option; Multiple Broadband Wireless interface for the industry-leading wireless
platforms; GPS Module and Video analytics at the edge. The PSB wireless camera system is compatible with 99% of IP
and analog PTZ camera including models from Axis, Sony, Bosch, Toshiba, Canon and many more. Integrated Video
Encoders form Verint, AXIS, Bosch, Mango & others. Optional Thermal-Electric active cooling to extend temperature
range to 150 degrees F. Optional 12VDC Solar or Battery Power.
Pubic Safety Broadband Wireless Camera system easy installation
The Public Safety Broadband wireless camera system is very easily mountable by a single person. The module design
makes it very easy to mount the camera. The system can be easily repositioned from one location to the next in minutes.
You first mount the camera mounting bracket with the optional UPS slot. Then you slip in the UPS module into the
camera mounting bracket, which is less than 10lbs. Then slip on the camera, which is less than 15lbs. All the connections
to the PSB camera and UPS are quick discount watertight connectors. The PSB UPS has a wide range input and accepts
90-280 AC and can be moved between 120VAC and 220VAC Streetlights.
Second step
Slip in Optional
UPS Module
First step
Mount camera/UPS
mounting bracket to pole
Camera
mounting bolts
Third Step
Slip camera on
bottom mounting
bolts and then
install top bolts
Attached
Photocell
power tap
With Optional UPS
Attached 24VDC UPS
power to quick connect
connector
Without Optional UPS
The Photocell AC power
cord is connected directly
to the camera enclosure
connector