This is a slide presentation used in Udemy teaching course explaining the use of sketchup to produce the Preliminary Design Document as part of the Architects Regular Design Service. It includes other Preliminary Design Presentation Documents submitted by the architect to the client.

1. Design Presentation of a
A Three Bedroom Residence using
A Preliminary Design Presentation Stage
of the Regular Design Practice of Architecture

2. The Plan Layout
Floor Plan
Space Requirements
• Entrance Foyer
• Living Room
• Terrace
• Dining Area
• Kitchen with breakfast nook
• 2 Car Garage
• Master’s Bedroom with T&B
• 3 Bedrooms (1 with own T&B)
• Common Toilet
• Powder Room
Powder
Room

3. The Elevations
Front Elevation
NOTE: Windows are not shown on the Left Side, Right Side and Rear Elevation
Left Side Elevation
Right Side ElevationRear Elevation

4. The Perspective Views
A Schematic Design Presentation
of a Three Bedroom Residence

5. Is used to produce all these
Drawing Documents and arranged
in a Presentation Format.

6. This is applied to the
Preliminary Design Presentation stage
in the
Regular Design Practice
of the
Architect.

7. The Preliminary Design
Presentation include other
documents such as;

8. A Technical Specification

9. And A Budgetary Estimate

10. Calculated by the Total Floor
Area Multiplied by
The Current Cost Parameter
per square meter

11. Example
Total Floor Area:
297 square meter
Current Cost Parameter per
square Meter
$500
(varies from low cost, medium
and high depending on the
material finishes to be
specified)

12. Example
Budgetary Estimate
297sm x $500 =
$148,500

13. Thank You Very Much