O slideshow foi denunciado.
Utilizamos seu perfil e dados de atividades no LinkedIn para personalizar e exibir anúncios mais relevantes. Altere suas preferências de anúncios quando desejar.

Powerpoint orthographic projections

19.353 visualizações

Publicada em

Publicada em: Tecnologia
  • Sex in your area is here: ♥♥♥ http://bit.ly/2F4cEJi ♥♥♥
    Tem certeza que deseja  Sim  Não
    Insira sua mensagem aqui
  • Dating direct: ❤❤❤ http://bit.ly/2F4cEJi ❤❤❤
    Tem certeza que deseja  Sim  Não
    Insira sua mensagem aqui

Powerpoint orthographic projections

  1. 1. Orthographic projection Module 1 Understanding Projection By: Jeremy Smith
  2. 2. Top View
  3. 3. This is the same box. Who would havethought from the first picture that there was ahole going through it. This is why we usedifferent line types to show “change indirection”.
  4. 4. Visible, Hidden and Center linesvisible – are continuous lines used to depict edges directly visible froma particular angle.hidden – are short-dashed lines that may be used to represent edges thatare not directly visible.center – are alternately long- and short-dashed lines that may be used torepresent the axes of circular features. Visible line Hidden line Center line Top View Isometric View
  5. 5. This is a top view of an object. 4Top View 4 Is this object a 4x4 box? Lets look at the front view to give us another prospective.
  6. 6. As you see this object is more complex that it first appeared. Thevisible line should have been your first clue. Visible line Top View Front ViewWhat have we learned so far? 1) Objects are not always what they seem. 2) That objects can not be clearly understood without different line types and with just one view.
  7. 7. 6 Principle ViewsThere are six principal views in a multi-view orthographicprojection. These are the front, back, top, bottom, and left-and right-side views.
  8. 8. Principal DimensionsThe three principal dimensions of an object are width,height, and depth. Now that we are familiar with the different views and the principal dimensions, lets look at some examples.
  9. 9. What dimension can we get from the front view? Front View
  10. 10. What dims can we get from the top view? Top View
  11. 11. Now since we have an idea of the 6principle views and the 3 principledimensions lets drive-in and seehow well you have it.