O SlideShare utiliza cookies para otimizar a funcionalidade e o desempenho do site, assim como para apresentar publicidade mais relevante aos nossos usuários. Se você continuar a navegar o site, você aceita o uso de cookies. Leia nosso Contrato do Usuário e nossa Política de Privacidade.
O SlideShare utiliza cookies para otimizar a funcionalidade e o desempenho do site, assim como para apresentar publicidade mais relevante aos nossos usuários. Se você continuar a utilizar o site, você aceita o uso de cookies. Leia nossa Política de Privacidade e nosso Contrato do Usuário para obter mais detalhes.
The steering gear mechanism is used for
changing the direction of two or more of the wheel
axles with reference to the chassis. Usually, Back
wheel axle is fixed in direction with reference to
the chassis and the steering is done by means of
the front wheels.
When the vehicle takes turn, the front wheels
along with the respective axles turn about
corresponding povited points.
Also, the back wheels remain straight and do not
turn. Therefore, steering is done by means of the
In order to avoid skidding(slipping of the wheels of
sideways),the two front wheels must turn about
the same instantaneous centre which lies on the
axis of the back wheels. if this does not happen,
the skidding on the front or back wheels will
definitely take place, which will in turn produce
more wear and tear on the tyres.
EI EF FI a FI
AE AE b
a FI FI a
b b b
= = =
∴ − = − =
This is an exact steering gear mechansm. This
mechanism fulfils the above steering condition. But due
to presence of more sliding members, the wear will be
increased and this eliminates the accuracy.
It is much simpler than Davis mechanism.
Difference between Davis and ackerman
◦ The whole mechanism is on back of the front wheels ,
whereas in Davis ,it is in front of the wheels.
◦ It consists of turning pairs, whereas in Davis, it consists
of sliding pairs.
When the vehicle moves along straight path, the
longer links AB and CD are parallel and the
shorter links BC and AD are equally inclined to the
longitudinal axis of the vehicle.
When the vehicle moves left, the position of the
gear is shown by dotted lines in fig.