SlideShare uma empresa Scribd logo
1 de 7
Baixar para ler offline
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2377
Design and Fabrication of an Electric Bike
A Karthi 1,N Afridhin2, D Aravind3, G Kamalesh4, K Rathish Kumar5
1Assistant Professor, Department of Automobile Engineering, SNS College of Technology, Coimbatore,
TamilNadu, India.
2,3,4,5Students, Department of Automobile Engineering, SNS College of Technology, Coimbatore, TamilNadu, India.
---------------------------------------------------------------------***----------------------------------------------------------------------
Abstract - The main aim of this project is to give the exact
view by bridling the various sources of energy available to
mankind. In today’s modernized world travelling is very
essential for human beings in order to protract in this world.
And to do so his travelling should be donein minimumpossible
way. This project details about the Electric Bike whichruns on
the battery thereby providing voltage to the motor. This
project compromises with design and fabrication of Electric
Bike which makes use of Electric energyastheprimarysource.
The electrical power generated which is used to run the bike
can give better fuel economy compared to conventional
vehicle, better performance and also causes less pollution. To
reduce the air pollution and the noise pollution. It provide an
ecofriendly vehicle and reduces the usage of fuels.Thus here
transmission
is also used as to control the speed of the vehicle as by
increasing and decreasing.The speed can be varied as like gas
powered motorcycle.
Key Words: 1.Travelling, 2.Electric bike, 3.Electric
energy, 4.Fuel economy, 5.Pollution, 6.Ecofriendly,
7.Transmission
1. INTRODUCTION
The Electric bike is a bike which is driven with the
help of battery which is coupled to electric motor. Energy
crisis is one of the major concerns in today’s world due to
fast depleting resources of petrol, diesel and natural gas. In
combination with this, environmental decay is an additional
factor which is contributing to the depletion of resources
which is an alarming notification. Our project has the
solution for this above perilous problems. Thesystemwhich
we innovated is the Electric Bike. This project has various
benefits both to the members of the team and also external
benefits thereby making awareness of using alternative
modes of transport. The Electric Bike which works on the
battery that is powered by the motor is the general mode of
transport for a local trip. The solar panels can be alternative
source for this by adding it to the system. The Electric bike
which will be running on battery, the power is supplied by
the motor, thereby supplying this power to drive the other
gear components. The main purpose of using this E-bike is
that it is user friendly, economical and relatively cheap. The
efficiency of this system undeniable compared to
conventional modes of transport. E-bike comprises the
features like high mobility efficiency, compact, electrically
powered, comfortable riding experience, light weight
vehicle. E-bike is the most versatile future vehicle
considering its advantages. Electric motorcycles and
scooters are plug-in electric vehicles with two or three
wheels. The electricity is stored on board in a rechargeable
battery, which drives one or more electric motors.
1.1 Instrumentation and Description
A. Working principle
It works on the principle that the electromotive force of
an A.C. motor which receives electrical energy stored in D.C.
battery is converted with the help of D.C. to A.C. converter.
B. WORKING
An electric motorcycle works essentially the same way a
gas-powered motorcycle works it is propelled by an engine,
and that engine requires fuel. The main difference is thatthe
gas fuel in a conventional motorcycle is replaced by either
batteries or fuel cells in an electric version. The operating
principle of an electric motor is quite similar to that of a gas
engine. In both cases motorcycles are powered by
mechanical energy, but only in one case aretheypowered by
rechargeable batteries. Electric vehicles run on electricity,
that causes a pole into the motor to spin it. It isn’t so much a
fuel-powered motor but rather a battery that can travel a
range of 40 to 100 miles between charges .When the battery
is ON the current flows to the motor and the power is
transmitted to the rear wheels with the help of chain drive
shaft.
1.2 Block Diagram
The diagram shows the parts and the connection between
them so it can be easily identified. The parts are as follows:
 Battery
 Motor
 Controller
 Shaft drive
 Throttle
 Charger
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2378
Fig:1 Block diagram
1.3 Components
A. Battery
Lithium batteries are primary batteries that have
metallic lithium as an anode. These types of batteries are
also referred to as lithium-metal batteries. They stand apart
from other batteries in their high charge density (long life)
and high cost per unit.
Fig:2 Battery
The three primary functional components of a lithium-ion
battery are the positive and negative electrodes and
electrolyte. Generally, the negative electrode of a
conventional lithium- ion cell is made from carbon. The
positive electrode is a metal oxide, and the electrolyte is a
lithium salt in an organic solvent.
B. Motor
A DC motor is any of a class of rotary electrical machines
that converts direct current electrical energy into
mechanical energy. The most common types rely on the
forces produced by magnetic fields. Nearly all types of DC
motors have some internal mechanism, either
electromechanical or electronic, to periodically change the
direction of current flow in part of the motor. DC motors
were the first form of motor widely used, as they could be
powered from existing direct-current lighting power
distribution systems. A DC motor's speed can be controlled
over a wide range, using either a variable supply voltage or
by changing the strength of current in its field windings.
Small DC motors are used in tools, toys, and appliances.
Larger DC motors are currentlyused inpropulsionof electric
vehicles, elevator and hoists, and in drives for steel rolling
mills.
This output could either be DCAC-DC transformation or
DC-DC conversion, based on the selection of a DC brushed
motor. The motor is having 750 watt. Capacity with
maximum 1000 rpm. Its specifications are as follows
Fig: 3 DC Motor
• Rated Operating Voltage : 48V
• Rated Power : 750W
• No Load Current : 4.0A
• Rated Torque : 102 kg-cm
• Rated Speed : 400 rpm
• Rated Current : 13.4A
• Efficiency : 80%
• Gear Ratio : 6.1
C. Chain drive
Chain drive is a way of transmitting mechanical power
from one place to another. It isoftenusedtoconveypower to
the wheels of a vehicle, particularly bicycles and
motorcycles. It is also used in a wide variety of machines
besides vehicles.
Fig: 4 Chain Drive
A chain-drive system uses one or more roller
chains to transmit power from a differential to the rear
axle. This system allowed for a great deal of vertical axle
movement (for example, over bumps), and was simpler to
design and build than a rigid driveshaft in a workable
suspension. Also, it had less unsprung weight at the rear
wheels than the Hotchkiss drive, which would have had half
the weight of the driveshaft, and differential to carry aswell.
2. TRANSMISSION
A transmission is a machine in a power transmission
system, which provides controlled application ofthe power.
Often the term transmission refers simply to the gearbox
that uses gears and gear trains to provide speed and torque
CHARGING
BATTERY CONTROLLER MOTOR TRANSMISSION
SHAFT
OUTPUT
THROTTLE
ELECTRICAL
ACCESSORIES
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2379
conversions from a rotating power source toanotherdevice.
The most common use is in motor vehicles, where the
transmission adapts the output of the internal combustion
engine to the drive wheels. Often, a transmission has
multiple gear ratios (or simply "gears") with the ability to
switch between them as speed varies. Thisswitching maybe
done manually (by the operator) or automatically.
2.1 Manual Transmission
A manual transmission is basically a more powerful
version of a bicycle’s gear shifter. Even though there’s no
chain in your car like there is in a bicycle, the engine and
transmission have to be temporarily disconnectedjustlikea
bicycle chain is temporarily lifted off of the gears when you
shift up or down. In your car, pushing the clutch disconnects
the engine and transmission. When you adjust the gear
shifter, it has the same effect as moving the bicyclechainand
moves your car into a new gear. Once you’re in a new gear,
you can release the clutch and drive on.
A manual transmission is basically a more powerful
version of a bicycle’s gear shifter. Even though there’s no
chain in your car like there is in a bicycle, the engine and
transmission have to be temporarily disconnectedjustlikea
bicycle chain is temporarily lifted off of the gears when you
shift up or down. In your car, pushing the clutch disconnects
the engine and transmission.
2.2 Automatic Transmission
An automatic transmission is essentially an automatic
gear shifter. Instead of manually shifting the gears with a
clutch on a manual transmission car or a gear shifter on a
bicycle, the automatictransmissiondoeseverythingfor you..
A car with an automatic transmission has a torqueconverter
that senses these changes as you accelerate and shiftsyou to
a highergear. The same process works inreverseasyouslow
down. Automatic transmissions are easy to use. However, in
the past, someautomatic transmissions ofthistypehave had
a number of problems; they were complex and expensive,
sometimes had reliability problems (which sometimes
caused more expenses in repair), have often been less fuel-
efficient than their manual counterparts(dueto"slippage"in
the torque converter), and their shifttime was slower thana
manual making them uncompetitive for racing. With the
advancement of modern automatic transmissions this has
changed(which sometimes caused moreexpenses inrepair).
The same process works in reverse as you slow down.
3. CONTROLLER
Fig 5: Controller
The mechanism of an electric speed controller varies
depending on whether you own an adaptive or purpose-
build electric bike. An adaptive bike includes an electric
drive system installed on an ordinary bicycle. A purpose-
built bike, more expensive than an adaptive bike, provides
easier acceleration and affords more features. The electric
bike speed controller sends signals to the bike's motor hub
in various voltages. These signals detect the direction of a
rotor relative to the starter coil. The proper function of a
speed control depends on the employment of various
mechanisms. In a purpose-built electric bike, Hall effect
sensors help detect the orientation oftherotor.Ifyourspeed
controller does not include such sensors -- and the speed
controller on an adaptive bike may not the electromotive
force of the undriven coil is calculated to get the rotor
orientation. The analog control systems on this bike are a
result of the need for user operation of the motor control
elements. A half-twist throttle has been selected as the
method for user interface to these elements.
Due to the output level of the throttle beingobservedasa
hall-effect driven DC voltage bias level, the analog circuitry
needs to handle the conversion from that voltage level to a
duty cycle on output waveform. Additionally, the control
circuit needs to function as a mode selection switch. As the
user adjusts the half twist throttle, the mode must change at
a predefined location that could be made adjustable for the
user with the inclusion of various components in future
iterations of design. A measurable, though small, amount of
hysteresis is necessary in this circuit to preventringingfrom
occurring- changing the modes quickly and randomly for a
few milliseconds would provide the user with discomfort as
the power circuits bounce back and forth between driving
and braking. Specifications of the controller are as follows:
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2380
• Rated Power : 750W
• Rated Current : 30A
• Under-voltage protection : DC41.5V+-0.5V
• Current Limited : 30A+-0.5A
• Efficiency : >=83%
• Consumption : <1.5W
3.1 Throttle
The throttle mode is similar to how a motorcycle
operates. When the throttle is engaged the motor provides
power and propels you and the bike forward. The motor
power can be increased or decreased by the restriction of
current (by use of a throttle), but usually decreased. The
term throttle has come to refer, informally, to any
mechanism by which the power or speed of an engine or
motor is regulated. A few e-bikes have a throttle, which may
conjure visions of a motorcycle’s twist grip, but in reality is
usually just a small electric button. Pressing the throttle
works justlikedepressing the gas pedal on yourcarnoother
action is required to accelerate or continue forward
Fig:6 Throttle
3.2 Charger
Fig:7 Charger
The Charger can be used to charge batteries of Bikes and
Cars. It has provision to set the charging current to 2A or
4A. The charging time for bike will be 3 to 4 hours and the
charging time for car will be 8 to 10 hours. Anyhow if the
battery isnot fully discharged then the charging time will be
lesser. Batteries do not like to be stored in very hot or very
cold conditions, or to be subject to conditions of high
moisture. They also do not like to be left in a fully discharged
state.
If Lithium batteries are left flat for an extended period
they maynolonger befunctional.Storeyourbatterybetween
15 °C (59 °F) and 25 °C (77 °F) in a dry area. (The conditions
found in a normal domestic house). Lithium batteries (and
indeed any type of rechargeable battery) do not liketobeleft
discharged. It is good practice to recharge as soon as is
reasonably possible after the battery goes flat. We
recommend charging after every ride, that way your electric
bike is always ready for your next outing. Do not charge at
temperatures below 0 °C (32 °F) Switch off the battery
before charging. (If the battery has a switch on it). Battery
can be charged on or off the bike. Always make sure the
battery and charger are on a non- flammable, dry surface
away from sources of heat, humidity and flammable
materials. Do not cover the battery or charger while
charging. Only use the charger supplied. Even if not in use,
recharge your battery a minimum of once a month.
4. Motor Power Rating Calculation
The motor power will be selected based on power
required to propel the vehicle. This is depends on weight of
the vehicle and top speed have to go. To find out the power
required to propel the vehicle calculations are done using
vehicle dynamics.
4.1 Wheel Speed
Initially we assumed that motor rated speed is
1750rpm from this we can calculate the wheel speed.
Nw =
Nw = = 437 rpm
4.2 Velocity
From the wheel speed velocity of the bike is
calculated
V=
V=
V=41.21km/hr
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2381
S.
No
Component Weight
1.
2.
3.
Vehicle
Battery
Motor
130 kg
4 kg
12 kg
Total 146 kg
Table.1 Weight of the individual components
4.3 Power Required
P=
P=
P = 0.7 Hp ≈ 1Hp
4.4 Torque @ 750 RPM
T=
T=
T = 4.35 N-m
4.5 Tractive Effort
TE=
TE=
TE = 62.64 N
4.6 Acceleration
F = ma
F = TE-Rt
TE = 62.64 N
Rt = 26.31 N
F = 62.64-26.31 = 36.33 N
m = 146 kg
a = = = 0.248 m/s2
a =
t =
V = 41.21 km/hr
= 41.21X
V = 11.4 m/s
t = = 46 sec
5. METHADOLOGY
Study on
existing
Identification
of the problem
Selection of
materials
Identify the input
and output
parameters by
literature survey
Fabrication and
optimization
Statistical analysis
of results
Validation of data
and final product
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2382
6. FABRICATED MODEL OF PROJECT
Fig:8 Bike
Fig: 9 Engine & Transmission
Fig: 10 Modified engine
Fig:11 DC Motor fixed with engine
Fig:12 E-Bike with transmission
7. RESULT
As the future of automobiles will be mostly of electrical
and electronics this would help in such way. While the
market abounds in motorbikes, electric bikes will soon be
the mode of communication for almost every
household.Thus the cost of the fuel and the economical
affects that are being faced can be reduced .Electric bike is
quite eco friendly and itcan bring a huge development to the
society in the future here in our project the charging is being
the major drawback and the alternate source can be found
and it will be rectified as soon as possible.
Advantages
a. Deployable batteries can be taken inside house
b. Cost of the unit is very low.
c. Easy to carry since it is portable.
d. Less energy consumed.
e. High efficiency can be obtained if inverter is used.
f. If using solar panel, free utilization of energy can be done.
8. FUTURE WORK
 The implementation of the project depend upon
the amount of time and resource todo the project
in an effective manner.
 Alternate source for charging is to be found soon
and it also may be implemented.
 Process of increasing the efficiency and power is
to be improved and further steps will be taken.
9. CONCLUSION
With the increasing consumption of natural resources of
petrol, diesel it is necessary to shift our way towards
alternate resources likethe Electric bike and others because
itisnecessary to identify new way of transport. Electric bike
isa modification of the existing cycle byusingelectricenergy
and also solar energy if solar panels areprovided,that would
sum up to increase in energy production. Since it is energy
efficient, electric bike ischeaper and affordable to anyone.It
can beused for shorter distances by people of any age. It can
be contrived throughout the year.
The most vital feature of the electric bike is that it does not
consume fossil fuels thereby saving crores of foreign
currencies. The second most important feature is it is
pollution free, ecofriendly and noiseless in operation. For
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072
© 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2383
offsetting environmental pollution using of on – board
Electric Bike is the most viable solution. It can be charged
with the help of AC adapter if there is an emergency. The
Operating cost per/km isvery less and with the help of solar
panel itcan lessen up more. Since ithas fewer components it
can beeasily dismantledtosmall components,thusrequiring
less maintenance.
10. REFERENCES
[1] Aikenhead, G. S. (2011). Bicycle Applications for On-
Board Solar Power Generation. 9,10.
[2 ]Barve, D. S. (2016). Design and Development of Solar
Hybrid Bicycle. International Journal of CurrentEngineering
and Technology, 377,378,379,380.
[3] Barve, D. S. (March 2016). Design and Development of
Solar Hybrid Bicycle. International Journal of Current
Engineering and Technology, 378,379.
[4] Barve, D. S. (March 2016). Design and Development of
Solar Hybrid Bicycle. International Journal of Current
Engineering and Technology, 380.
[5] FOGELBERG, F. (2014). Solar Powered Bike Sharing
System. Goteberg, Sweden: Viktoria Swedish ICT.
[6] FOGELBERG, F. (2014). Solar Powered Bike Sharing
System with. Goteborg, sweden: Viktoria Swedish ICT.
[7] GOODMAN, J. D. (2010, Jan 31). An Electric Boost for
Bicyclists. The New York Times.
[8] Prof. Palak Desai, P. D. (June 2016). Design and
Fabrication of Solar Tri Cycle. International Journal of
Engineering Sciences & Research, 664.
[9] Hameed Majeed Saber and Deepak Lal, Assessment of
Solar Energy Distribution For Installing Solar Panels Using
Remote Sensing & GIS Techniques, International Journal of
Advanced Research inEngineeringandTechnology(IJARET)
Volume 5, Issue 10, October (2014), pp. 157-164.
[10]Srijan Manish, Jitendra KumarRajak,VishnuKantTiwari
and Rakesh, Quad Bike Design And Simulation: A Pre-
Manufacturing Methodology, International Journal of
Advanced Research in Engineering and Technology
(IJARET)Volume 5, Issue 6, June (2014), pp. 6876
[11] T.Bhavani. (April 2015). Novel Design of Solar Electric
Bicycle with Pedal. International Journal & Magazine of
Engineering, 108.
[12]Wolf,A.;Seebauer,S. Technology adoption of
electricbicycles: A survey among earlyadopters.Transp.Res.
Part A Policy Pract. 2014, 69, 196–211

Mais conteúdo relacionado

Mais procurados

Project report on Chainless Bicycle
Project report on Chainless BicycleProject report on Chainless Bicycle
Project report on Chainless BicycleAlok Prakash Singh
 
Coupling clutch brake
Coupling clutch brakeCoupling clutch brake
Coupling clutch brakeTanuj Parikh
 
Chainless bicycle ppt presentation
Chainless bicycle ppt presentationChainless bicycle ppt presentation
Chainless bicycle ppt presentationAlok Prakash Singh
 
Design and fabrication of motorized screw jack
Design and fabrication of motorized screw jackDesign and fabrication of motorized screw jack
Design and fabrication of motorized screw jackshashin vyas
 
Final year project report on scissor lift
Final year project report on scissor liftFinal year project report on scissor lift
Final year project report on scissor liftDhiraj Rane
 
The benefits of electric scooters
The benefits of electric scootersThe benefits of electric scooters
The benefits of electric scootersscooteretticompany
 
Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION
Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION
Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION Anubhav Maheshwari
 
FORCE CALCULATION IN UPRIGHT OF A FSAE RACE CAR
FORCE CALCULATION IN UPRIGHT OF A FSAE RACE CARFORCE CALCULATION IN UPRIGHT OF A FSAE RACE CAR
FORCE CALCULATION IN UPRIGHT OF A FSAE RACE CARIAEME Publication
 
Hydraulic Scissor Lift PPT
Hydraulic Scissor Lift PPTHydraulic Scissor Lift PPT
Hydraulic Scissor Lift PPTMechXplain
 
Suspension Lecture
Suspension  LectureSuspension  Lecture
Suspension Lectureguest252b17
 
Magnetic bearings
Magnetic bearingsMagnetic bearings
Magnetic bearingshome!
 
E- BICYCLE PPT.pptx
E- BICYCLE PPT.pptxE- BICYCLE PPT.pptx
E- BICYCLE PPT.pptxShiweshRai1
 
Report on Studies of Electric Vehicle Technologies
Report on Studies of Electric Vehicle TechnologiesReport on Studies of Electric Vehicle Technologies
Report on Studies of Electric Vehicle TechnologiesMAYANK ACHARYA
 
Analysis of Rack and Pinion under dynamic conditions
Analysis of Rack and Pinion under dynamic conditionsAnalysis of Rack and Pinion under dynamic conditions
Analysis of Rack and Pinion under dynamic conditionsnagaraju kondrasi
 

Mais procurados (20)

Project report on Chainless Bicycle
Project report on Chainless BicycleProject report on Chainless Bicycle
Project report on Chainless Bicycle
 
PARAMETRIC STRESS ANALYSIS OF HELICAL GEAR USING FEA
PARAMETRIC STRESS ANALYSIS OF HELICAL GEAR USING FEAPARAMETRIC STRESS ANALYSIS OF HELICAL GEAR USING FEA
PARAMETRIC STRESS ANALYSIS OF HELICAL GEAR USING FEA
 
T1 1 rolling resistance
T1 1 rolling resistanceT1 1 rolling resistance
T1 1 rolling resistance
 
Steering System.pdf
Steering System.pdfSteering System.pdf
Steering System.pdf
 
Coupling clutch brake
Coupling clutch brakeCoupling clutch brake
Coupling clutch brake
 
Chainless bicycle ppt presentation
Chainless bicycle ppt presentationChainless bicycle ppt presentation
Chainless bicycle ppt presentation
 
Design and fabrication of motorized screw jack
Design and fabrication of motorized screw jackDesign and fabrication of motorized screw jack
Design and fabrication of motorized screw jack
 
Helical Gear - 1.pptx
Helical Gear - 1.pptxHelical Gear - 1.pptx
Helical Gear - 1.pptx
 
Final year project report on scissor lift
Final year project report on scissor liftFinal year project report on scissor lift
Final year project report on scissor lift
 
The benefits of electric scooters
The benefits of electric scootersThe benefits of electric scooters
The benefits of electric scooters
 
Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION
Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION
Virtual BAJA 2015_(16190)_(Team Prayog)_PRESENTATION
 
Project Report
Project ReportProject Report
Project Report
 
FORCE CALCULATION IN UPRIGHT OF A FSAE RACE CAR
FORCE CALCULATION IN UPRIGHT OF A FSAE RACE CARFORCE CALCULATION IN UPRIGHT OF A FSAE RACE CAR
FORCE CALCULATION IN UPRIGHT OF A FSAE RACE CAR
 
Hydraulic Scissor Lift PPT
Hydraulic Scissor Lift PPTHydraulic Scissor Lift PPT
Hydraulic Scissor Lift PPT
 
Suspension Lecture
Suspension  LectureSuspension  Lecture
Suspension Lecture
 
Magnetic bearings
Magnetic bearingsMagnetic bearings
Magnetic bearings
 
E- BICYCLE PPT.pptx
E- BICYCLE PPT.pptxE- BICYCLE PPT.pptx
E- BICYCLE PPT.pptx
 
Report on Studies of Electric Vehicle Technologies
Report on Studies of Electric Vehicle TechnologiesReport on Studies of Electric Vehicle Technologies
Report on Studies of Electric Vehicle Technologies
 
Analysis of Rack and Pinion under dynamic conditions
Analysis of Rack and Pinion under dynamic conditionsAnalysis of Rack and Pinion under dynamic conditions
Analysis of Rack and Pinion under dynamic conditions
 
Applications of Belt, Rope and Chain Drives
Applications of Belt, Rope and Chain DrivesApplications of Belt, Rope and Chain Drives
Applications of Belt, Rope and Chain Drives
 

Semelhante a IRJET - Design and Fabrication of an Electric Bike

Self Power Generating Electrical Bicycle
Self Power Generating Electrical BicycleSelf Power Generating Electrical Bicycle
Self Power Generating Electrical BicycleIRJET Journal
 
IRJET- An Overview of Electric Vehicle Concept and its Evolution
IRJET- An Overview of Electric Vehicle Concept and its EvolutionIRJET- An Overview of Electric Vehicle Concept and its Evolution
IRJET- An Overview of Electric Vehicle Concept and its EvolutionIRJET Journal
 
IRJET- Review on Modified Vehicles for Differently Abled People
IRJET- Review on Modified Vehicles for Differently Abled PeopleIRJET- Review on Modified Vehicles for Differently Abled People
IRJET- Review on Modified Vehicles for Differently Abled PeopleIRJET Journal
 
IRJET- Design and Implementation of Electric Vehicle
IRJET- Design and Implementation of Electric VehicleIRJET- Design and Implementation of Electric Vehicle
IRJET- Design and Implementation of Electric VehicleIRJET Journal
 
IRJET- Performance Analysis of Electric Bike using Battery and Supercapacitor
IRJET- Performance Analysis of Electric Bike using Battery and SupercapacitorIRJET- Performance Analysis of Electric Bike using Battery and Supercapacitor
IRJET- Performance Analysis of Electric Bike using Battery and SupercapacitorIRJET Journal
 
DESIGN OF POWER GENERATING SPEED BREAKER
DESIGN OF POWER GENERATING SPEED BREAKERDESIGN OF POWER GENERATING SPEED BREAKER
DESIGN OF POWER GENERATING SPEED BREAKERIRJET Journal
 
IRJET- Smart Shock Absorber
IRJET- Smart Shock AbsorberIRJET- Smart Shock Absorber
IRJET- Smart Shock AbsorberIRJET Journal
 
IRJET- Design and Manufacturing of Hybrid Bicycle
IRJET-  	  Design and Manufacturing of Hybrid BicycleIRJET-  	  Design and Manufacturing of Hybrid Bicycle
IRJET- Design and Manufacturing of Hybrid BicycleIRJET Journal
 
IRJET- Internally Charging E-Bike using Pedalling
IRJET-  	  Internally Charging E-Bike using PedallingIRJET-  	  Internally Charging E-Bike using Pedalling
IRJET- Internally Charging E-Bike using PedallingIRJET Journal
 
IRJET- Electric Vehicle Mechanism
IRJET-  	  Electric Vehicle MechanismIRJET-  	  Electric Vehicle Mechanism
IRJET- Electric Vehicle MechanismIRJET Journal
 
ELECTRIC POWER HAND TRUCK
ELECTRIC POWER HAND TRUCKELECTRIC POWER HAND TRUCK
ELECTRIC POWER HAND TRUCKIRJET Journal
 
Internship ppt format (1) (1).pptx
Internship ppt format (1) (1).pptxInternship ppt format (1) (1).pptx
Internship ppt format (1) (1).pptxJagadeeshJaya
 
Free Powered Electric Vehicle_Designed by Pranav Navathe
Free Powered Electric Vehicle_Designed by Pranav NavatheFree Powered Electric Vehicle_Designed by Pranav Navathe
Free Powered Electric Vehicle_Designed by Pranav NavathePranavNavathe
 
Electrical bicycle using lead acid battery.
Electrical bicycle using lead acid battery.Electrical bicycle using lead acid battery.
Electrical bicycle using lead acid battery.IRJET Journal
 
IRJET- Railway Track based Electrical Power Generation
IRJET-  	  Railway Track based Electrical Power GenerationIRJET-  	  Railway Track based Electrical Power Generation
IRJET- Railway Track based Electrical Power GenerationIRJET Journal
 

Semelhante a IRJET - Design and Fabrication of an Electric Bike (20)

SMART CYCLE
SMART CYCLESMART CYCLE
SMART CYCLE
 
Self Power Generating Electrical Bicycle
Self Power Generating Electrical BicycleSelf Power Generating Electrical Bicycle
Self Power Generating Electrical Bicycle
 
IRJET- An Overview of Electric Vehicle Concept and its Evolution
IRJET- An Overview of Electric Vehicle Concept and its EvolutionIRJET- An Overview of Electric Vehicle Concept and its Evolution
IRJET- An Overview of Electric Vehicle Concept and its Evolution
 
Regenerative braking
Regenerative brakingRegenerative braking
Regenerative braking
 
IRJET- Review on Modified Vehicles for Differently Abled People
IRJET- Review on Modified Vehicles for Differently Abled PeopleIRJET- Review on Modified Vehicles for Differently Abled People
IRJET- Review on Modified Vehicles for Differently Abled People
 
IRJET- Design and Implementation of Electric Vehicle
IRJET- Design and Implementation of Electric VehicleIRJET- Design and Implementation of Electric Vehicle
IRJET- Design and Implementation of Electric Vehicle
 
IRJET- Performance Analysis of Electric Bike using Battery and Supercapacitor
IRJET- Performance Analysis of Electric Bike using Battery and SupercapacitorIRJET- Performance Analysis of Electric Bike using Battery and Supercapacitor
IRJET- Performance Analysis of Electric Bike using Battery and Supercapacitor
 
IJMET_08_03_027.pdf
IJMET_08_03_027.pdfIJMET_08_03_027.pdf
IJMET_08_03_027.pdf
 
DESIGN OF POWER GENERATING SPEED BREAKER
DESIGN OF POWER GENERATING SPEED BREAKERDESIGN OF POWER GENERATING SPEED BREAKER
DESIGN OF POWER GENERATING SPEED BREAKER
 
IRJET- Smart Shock Absorber
IRJET- Smart Shock AbsorberIRJET- Smart Shock Absorber
IRJET- Smart Shock Absorber
 
energies-16-00160.pdf
energies-16-00160.pdfenergies-16-00160.pdf
energies-16-00160.pdf
 
IRJET- Design and Manufacturing of Hybrid Bicycle
IRJET-  	  Design and Manufacturing of Hybrid BicycleIRJET-  	  Design and Manufacturing of Hybrid Bicycle
IRJET- Design and Manufacturing of Hybrid Bicycle
 
IRJET- Internally Charging E-Bike using Pedalling
IRJET-  	  Internally Charging E-Bike using PedallingIRJET-  	  Internally Charging E-Bike using Pedalling
IRJET- Internally Charging E-Bike using Pedalling
 
IRJET- Electric Vehicle Mechanism
IRJET-  	  Electric Vehicle MechanismIRJET-  	  Electric Vehicle Mechanism
IRJET- Electric Vehicle Mechanism
 
ELECTRIC POWER HAND TRUCK
ELECTRIC POWER HAND TRUCKELECTRIC POWER HAND TRUCK
ELECTRIC POWER HAND TRUCK
 
Internship ppt format (1) (1).pptx
Internship ppt format (1) (1).pptxInternship ppt format (1) (1).pptx
Internship ppt format (1) (1).pptx
 
Free Powered Electric Vehicle_Designed by Pranav Navathe
Free Powered Electric Vehicle_Designed by Pranav NavatheFree Powered Electric Vehicle_Designed by Pranav Navathe
Free Powered Electric Vehicle_Designed by Pranav Navathe
 
HyBrid Motor Cycle...
HyBrid Motor Cycle...HyBrid Motor Cycle...
HyBrid Motor Cycle...
 
Electrical bicycle using lead acid battery.
Electrical bicycle using lead acid battery.Electrical bicycle using lead acid battery.
Electrical bicycle using lead acid battery.
 
IRJET- Railway Track based Electrical Power Generation
IRJET-  	  Railway Track based Electrical Power GenerationIRJET-  	  Railway Track based Electrical Power Generation
IRJET- Railway Track based Electrical Power Generation
 

Mais de IRJET Journal

TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
 
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURESTUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
 
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...IRJET Journal
 
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil CharacteristicsEffect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil CharacteristicsIRJET Journal
 
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...IRJET Journal
 
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...IRJET Journal
 
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...IRJET Journal
 
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...IRJET Journal
 
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADASA REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADASIRJET Journal
 
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...IRJET Journal
 
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD ProP.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
 
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare SystemSurvey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare SystemIRJET Journal
 
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridgesReview on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridgesIRJET Journal
 
React based fullstack edtech web application
React based fullstack edtech web applicationReact based fullstack edtech web application
React based fullstack edtech web applicationIRJET Journal
 
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...IRJET Journal
 
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.IRJET Journal
 
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...IRJET Journal
 
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignMultistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignIRJET Journal
 
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...IRJET Journal
 
Solving Linear Differential Equations with Constant Coefficients
Solving Linear Differential Equations with Constant CoefficientsSolving Linear Differential Equations with Constant Coefficients
Solving Linear Differential Equations with Constant CoefficientsIRJET Journal
 

Mais de IRJET Journal (20)

TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...
 
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURESTUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTURE
 
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...
 
Effect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil CharacteristicsEffect of Camber and Angles of Attack on Airfoil Characteristics
Effect of Camber and Angles of Attack on Airfoil Characteristics
 
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...
 
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...
 
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...
 
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...
 
A REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADASA REVIEW ON MACHINE LEARNING IN ADAS
A REVIEW ON MACHINE LEARNING IN ADAS
 
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...
 
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD ProP.E.B. Framed Structure Design and Analysis Using STAAD Pro
P.E.B. Framed Structure Design and Analysis Using STAAD Pro
 
Survey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare SystemSurvey Paper on Cloud-Based Secured Healthcare System
Survey Paper on Cloud-Based Secured Healthcare System
 
Review on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridgesReview on studies and research on widening of existing concrete bridges
Review on studies and research on widening of existing concrete bridges
 
React based fullstack edtech web application
React based fullstack edtech web applicationReact based fullstack edtech web application
React based fullstack edtech web application
 
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...
 
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.
 
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...
 
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignMultistoried and Multi Bay Steel Building Frame by using Seismic Design
Multistoried and Multi Bay Steel Building Frame by using Seismic Design
 
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...
 
Solving Linear Differential Equations with Constant Coefficients
Solving Linear Differential Equations with Constant CoefficientsSolving Linear Differential Equations with Constant Coefficients
Solving Linear Differential Equations with Constant Coefficients
 

Último

Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid BodyAhmadHajasad2
 
Guardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSecGuardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSecTrupti Shiralkar, CISSP
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxNaveenVerma126
 
Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsYusuf Yıldız
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxwendy cai
 
Test of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxTest of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxHome
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptxSaiGouthamSunkara
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxrealme6igamerr
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxKISHAN KUMAR
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxjasonsedano2
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxLMW Machine Tool Division
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvementVijayMuni2
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfNaveenVerma126
 
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...Sean Meyn
 
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfJulia Kaye
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesDIPIKA83
 

Último (20)

Lecture 4 .pdf
Lecture 4                              .pdfLecture 4                              .pdf
Lecture 4 .pdf
 
計劃趕得上變化
計劃趕得上變化計劃趕得上變化
計劃趕得上變化
 
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
Engineering Mechanics  Chapter 5  Equilibrium of a Rigid BodyEngineering Mechanics  Chapter 5  Equilibrium of a Rigid Body
Engineering Mechanics Chapter 5 Equilibrium of a Rigid Body
 
Guardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSecGuardians and Glitches: Navigating the Duality of Gen AI in AppSec
Guardians and Glitches: Navigating the Duality of Gen AI in AppSec
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
 
Présentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdfPrésentation IIRB 2024 Marine Cordonnier.pdf
Présentation IIRB 2024 Marine Cordonnier.pdf
 
Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovations
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptx
 
Test of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptxTest of Significance of Large Samples for Mean = µ.pptx
Test of Significance of Large Samples for Mean = µ.pptx
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptx
 
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptxUNIT4_ESD_wfffffggggggggggggith_ARM.pptx
UNIT4_ESD_wfffffggggggggggggith_ARM.pptx
 
Mohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptxMohs Scale of Hardness, Hardness Scale.pptx
Mohs Scale of Hardness, Hardness Scale.pptx
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptx
 
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptxVertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
Vertical- Machining - Center - VMC -LMW-Machine-Tool-Division.pptx
 
Landsman converter for power factor improvement
Landsman converter for power factor improvementLandsman converter for power factor improvement
Landsman converter for power factor improvement
 
Litature Review: Research Paper work for Engineering
Litature Review: Research Paper work for EngineeringLitature Review: Research Paper work for Engineering
Litature Review: Research Paper work for Engineering
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
 
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
Quasi-Stochastic Approximation: Algorithm Design Principles with Applications...
 
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdfsdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
sdfsadopkjpiosufoiasdoifjasldkjfl a asldkjflaskdjflkjsdsdf
 
Graphics Primitives and CG Display Devices
Graphics Primitives and CG Display DevicesGraphics Primitives and CG Display Devices
Graphics Primitives and CG Display Devices
 

IRJET - Design and Fabrication of an Electric Bike

  • 1. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072 © 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2377 Design and Fabrication of an Electric Bike A Karthi 1,N Afridhin2, D Aravind3, G Kamalesh4, K Rathish Kumar5 1Assistant Professor, Department of Automobile Engineering, SNS College of Technology, Coimbatore, TamilNadu, India. 2,3,4,5Students, Department of Automobile Engineering, SNS College of Technology, Coimbatore, TamilNadu, India. ---------------------------------------------------------------------***---------------------------------------------------------------------- Abstract - The main aim of this project is to give the exact view by bridling the various sources of energy available to mankind. In today’s modernized world travelling is very essential for human beings in order to protract in this world. And to do so his travelling should be donein minimumpossible way. This project details about the Electric Bike whichruns on the battery thereby providing voltage to the motor. This project compromises with design and fabrication of Electric Bike which makes use of Electric energyastheprimarysource. The electrical power generated which is used to run the bike can give better fuel economy compared to conventional vehicle, better performance and also causes less pollution. To reduce the air pollution and the noise pollution. It provide an ecofriendly vehicle and reduces the usage of fuels.Thus here transmission is also used as to control the speed of the vehicle as by increasing and decreasing.The speed can be varied as like gas powered motorcycle. Key Words: 1.Travelling, 2.Electric bike, 3.Electric energy, 4.Fuel economy, 5.Pollution, 6.Ecofriendly, 7.Transmission 1. INTRODUCTION The Electric bike is a bike which is driven with the help of battery which is coupled to electric motor. Energy crisis is one of the major concerns in today’s world due to fast depleting resources of petrol, diesel and natural gas. In combination with this, environmental decay is an additional factor which is contributing to the depletion of resources which is an alarming notification. Our project has the solution for this above perilous problems. Thesystemwhich we innovated is the Electric Bike. This project has various benefits both to the members of the team and also external benefits thereby making awareness of using alternative modes of transport. The Electric Bike which works on the battery that is powered by the motor is the general mode of transport for a local trip. The solar panels can be alternative source for this by adding it to the system. The Electric bike which will be running on battery, the power is supplied by the motor, thereby supplying this power to drive the other gear components. The main purpose of using this E-bike is that it is user friendly, economical and relatively cheap. The efficiency of this system undeniable compared to conventional modes of transport. E-bike comprises the features like high mobility efficiency, compact, electrically powered, comfortable riding experience, light weight vehicle. E-bike is the most versatile future vehicle considering its advantages. Electric motorcycles and scooters are plug-in electric vehicles with two or three wheels. The electricity is stored on board in a rechargeable battery, which drives one or more electric motors. 1.1 Instrumentation and Description A. Working principle It works on the principle that the electromotive force of an A.C. motor which receives electrical energy stored in D.C. battery is converted with the help of D.C. to A.C. converter. B. WORKING An electric motorcycle works essentially the same way a gas-powered motorcycle works it is propelled by an engine, and that engine requires fuel. The main difference is thatthe gas fuel in a conventional motorcycle is replaced by either batteries or fuel cells in an electric version. The operating principle of an electric motor is quite similar to that of a gas engine. In both cases motorcycles are powered by mechanical energy, but only in one case aretheypowered by rechargeable batteries. Electric vehicles run on electricity, that causes a pole into the motor to spin it. It isn’t so much a fuel-powered motor but rather a battery that can travel a range of 40 to 100 miles between charges .When the battery is ON the current flows to the motor and the power is transmitted to the rear wheels with the help of chain drive shaft. 1.2 Block Diagram The diagram shows the parts and the connection between them so it can be easily identified. The parts are as follows:  Battery  Motor  Controller  Shaft drive  Throttle  Charger
  • 2. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072 © 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2378 Fig:1 Block diagram 1.3 Components A. Battery Lithium batteries are primary batteries that have metallic lithium as an anode. These types of batteries are also referred to as lithium-metal batteries. They stand apart from other batteries in their high charge density (long life) and high cost per unit. Fig:2 Battery The three primary functional components of a lithium-ion battery are the positive and negative electrodes and electrolyte. Generally, the negative electrode of a conventional lithium- ion cell is made from carbon. The positive electrode is a metal oxide, and the electrolyte is a lithium salt in an organic solvent. B. Motor A DC motor is any of a class of rotary electrical machines that converts direct current electrical energy into mechanical energy. The most common types rely on the forces produced by magnetic fields. Nearly all types of DC motors have some internal mechanism, either electromechanical or electronic, to periodically change the direction of current flow in part of the motor. DC motors were the first form of motor widely used, as they could be powered from existing direct-current lighting power distribution systems. A DC motor's speed can be controlled over a wide range, using either a variable supply voltage or by changing the strength of current in its field windings. Small DC motors are used in tools, toys, and appliances. Larger DC motors are currentlyused inpropulsionof electric vehicles, elevator and hoists, and in drives for steel rolling mills. This output could either be DCAC-DC transformation or DC-DC conversion, based on the selection of a DC brushed motor. The motor is having 750 watt. Capacity with maximum 1000 rpm. Its specifications are as follows Fig: 3 DC Motor • Rated Operating Voltage : 48V • Rated Power : 750W • No Load Current : 4.0A • Rated Torque : 102 kg-cm • Rated Speed : 400 rpm • Rated Current : 13.4A • Efficiency : 80% • Gear Ratio : 6.1 C. Chain drive Chain drive is a way of transmitting mechanical power from one place to another. It isoftenusedtoconveypower to the wheels of a vehicle, particularly bicycles and motorcycles. It is also used in a wide variety of machines besides vehicles. Fig: 4 Chain Drive A chain-drive system uses one or more roller chains to transmit power from a differential to the rear axle. This system allowed for a great deal of vertical axle movement (for example, over bumps), and was simpler to design and build than a rigid driveshaft in a workable suspension. Also, it had less unsprung weight at the rear wheels than the Hotchkiss drive, which would have had half the weight of the driveshaft, and differential to carry aswell. 2. TRANSMISSION A transmission is a machine in a power transmission system, which provides controlled application ofthe power. Often the term transmission refers simply to the gearbox that uses gears and gear trains to provide speed and torque CHARGING BATTERY CONTROLLER MOTOR TRANSMISSION SHAFT OUTPUT THROTTLE ELECTRICAL ACCESSORIES
  • 3. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072 © 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2379 conversions from a rotating power source toanotherdevice. The most common use is in motor vehicles, where the transmission adapts the output of the internal combustion engine to the drive wheels. Often, a transmission has multiple gear ratios (or simply "gears") with the ability to switch between them as speed varies. Thisswitching maybe done manually (by the operator) or automatically. 2.1 Manual Transmission A manual transmission is basically a more powerful version of a bicycle’s gear shifter. Even though there’s no chain in your car like there is in a bicycle, the engine and transmission have to be temporarily disconnectedjustlikea bicycle chain is temporarily lifted off of the gears when you shift up or down. In your car, pushing the clutch disconnects the engine and transmission. When you adjust the gear shifter, it has the same effect as moving the bicyclechainand moves your car into a new gear. Once you’re in a new gear, you can release the clutch and drive on. A manual transmission is basically a more powerful version of a bicycle’s gear shifter. Even though there’s no chain in your car like there is in a bicycle, the engine and transmission have to be temporarily disconnectedjustlikea bicycle chain is temporarily lifted off of the gears when you shift up or down. In your car, pushing the clutch disconnects the engine and transmission. 2.2 Automatic Transmission An automatic transmission is essentially an automatic gear shifter. Instead of manually shifting the gears with a clutch on a manual transmission car or a gear shifter on a bicycle, the automatictransmissiondoeseverythingfor you.. A car with an automatic transmission has a torqueconverter that senses these changes as you accelerate and shiftsyou to a highergear. The same process works inreverseasyouslow down. Automatic transmissions are easy to use. However, in the past, someautomatic transmissions ofthistypehave had a number of problems; they were complex and expensive, sometimes had reliability problems (which sometimes caused more expenses in repair), have often been less fuel- efficient than their manual counterparts(dueto"slippage"in the torque converter), and their shifttime was slower thana manual making them uncompetitive for racing. With the advancement of modern automatic transmissions this has changed(which sometimes caused moreexpenses inrepair). The same process works in reverse as you slow down. 3. CONTROLLER Fig 5: Controller The mechanism of an electric speed controller varies depending on whether you own an adaptive or purpose- build electric bike. An adaptive bike includes an electric drive system installed on an ordinary bicycle. A purpose- built bike, more expensive than an adaptive bike, provides easier acceleration and affords more features. The electric bike speed controller sends signals to the bike's motor hub in various voltages. These signals detect the direction of a rotor relative to the starter coil. The proper function of a speed control depends on the employment of various mechanisms. In a purpose-built electric bike, Hall effect sensors help detect the orientation oftherotor.Ifyourspeed controller does not include such sensors -- and the speed controller on an adaptive bike may not the electromotive force of the undriven coil is calculated to get the rotor orientation. The analog control systems on this bike are a result of the need for user operation of the motor control elements. A half-twist throttle has been selected as the method for user interface to these elements. Due to the output level of the throttle beingobservedasa hall-effect driven DC voltage bias level, the analog circuitry needs to handle the conversion from that voltage level to a duty cycle on output waveform. Additionally, the control circuit needs to function as a mode selection switch. As the user adjusts the half twist throttle, the mode must change at a predefined location that could be made adjustable for the user with the inclusion of various components in future iterations of design. A measurable, though small, amount of hysteresis is necessary in this circuit to preventringingfrom occurring- changing the modes quickly and randomly for a few milliseconds would provide the user with discomfort as the power circuits bounce back and forth between driving and braking. Specifications of the controller are as follows:
  • 4. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072 © 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2380 • Rated Power : 750W • Rated Current : 30A • Under-voltage protection : DC41.5V+-0.5V • Current Limited : 30A+-0.5A • Efficiency : >=83% • Consumption : <1.5W 3.1 Throttle The throttle mode is similar to how a motorcycle operates. When the throttle is engaged the motor provides power and propels you and the bike forward. The motor power can be increased or decreased by the restriction of current (by use of a throttle), but usually decreased. The term throttle has come to refer, informally, to any mechanism by which the power or speed of an engine or motor is regulated. A few e-bikes have a throttle, which may conjure visions of a motorcycle’s twist grip, but in reality is usually just a small electric button. Pressing the throttle works justlikedepressing the gas pedal on yourcarnoother action is required to accelerate or continue forward Fig:6 Throttle 3.2 Charger Fig:7 Charger The Charger can be used to charge batteries of Bikes and Cars. It has provision to set the charging current to 2A or 4A. The charging time for bike will be 3 to 4 hours and the charging time for car will be 8 to 10 hours. Anyhow if the battery isnot fully discharged then the charging time will be lesser. Batteries do not like to be stored in very hot or very cold conditions, or to be subject to conditions of high moisture. They also do not like to be left in a fully discharged state. If Lithium batteries are left flat for an extended period they maynolonger befunctional.Storeyourbatterybetween 15 °C (59 °F) and 25 °C (77 °F) in a dry area. (The conditions found in a normal domestic house). Lithium batteries (and indeed any type of rechargeable battery) do not liketobeleft discharged. It is good practice to recharge as soon as is reasonably possible after the battery goes flat. We recommend charging after every ride, that way your electric bike is always ready for your next outing. Do not charge at temperatures below 0 °C (32 °F) Switch off the battery before charging. (If the battery has a switch on it). Battery can be charged on or off the bike. Always make sure the battery and charger are on a non- flammable, dry surface away from sources of heat, humidity and flammable materials. Do not cover the battery or charger while charging. Only use the charger supplied. Even if not in use, recharge your battery a minimum of once a month. 4. Motor Power Rating Calculation The motor power will be selected based on power required to propel the vehicle. This is depends on weight of the vehicle and top speed have to go. To find out the power required to propel the vehicle calculations are done using vehicle dynamics. 4.1 Wheel Speed Initially we assumed that motor rated speed is 1750rpm from this we can calculate the wheel speed. Nw = Nw = = 437 rpm 4.2 Velocity From the wheel speed velocity of the bike is calculated V= V= V=41.21km/hr
  • 5. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072 © 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2381 S. No Component Weight 1. 2. 3. Vehicle Battery Motor 130 kg 4 kg 12 kg Total 146 kg Table.1 Weight of the individual components 4.3 Power Required P= P= P = 0.7 Hp ≈ 1Hp 4.4 Torque @ 750 RPM T= T= T = 4.35 N-m 4.5 Tractive Effort TE= TE= TE = 62.64 N 4.6 Acceleration F = ma F = TE-Rt TE = 62.64 N Rt = 26.31 N F = 62.64-26.31 = 36.33 N m = 146 kg a = = = 0.248 m/s2 a = t = V = 41.21 km/hr = 41.21X V = 11.4 m/s t = = 46 sec 5. METHADOLOGY Study on existing Identification of the problem Selection of materials Identify the input and output parameters by literature survey Fabrication and optimization Statistical analysis of results Validation of data and final product
  • 6. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072 © 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2382 6. FABRICATED MODEL OF PROJECT Fig:8 Bike Fig: 9 Engine & Transmission Fig: 10 Modified engine Fig:11 DC Motor fixed with engine Fig:12 E-Bike with transmission 7. RESULT As the future of automobiles will be mostly of electrical and electronics this would help in such way. While the market abounds in motorbikes, electric bikes will soon be the mode of communication for almost every household.Thus the cost of the fuel and the economical affects that are being faced can be reduced .Electric bike is quite eco friendly and itcan bring a huge development to the society in the future here in our project the charging is being the major drawback and the alternate source can be found and it will be rectified as soon as possible. Advantages a. Deployable batteries can be taken inside house b. Cost of the unit is very low. c. Easy to carry since it is portable. d. Less energy consumed. e. High efficiency can be obtained if inverter is used. f. If using solar panel, free utilization of energy can be done. 8. FUTURE WORK  The implementation of the project depend upon the amount of time and resource todo the project in an effective manner.  Alternate source for charging is to be found soon and it also may be implemented.  Process of increasing the efficiency and power is to be improved and further steps will be taken. 9. CONCLUSION With the increasing consumption of natural resources of petrol, diesel it is necessary to shift our way towards alternate resources likethe Electric bike and others because itisnecessary to identify new way of transport. Electric bike isa modification of the existing cycle byusingelectricenergy and also solar energy if solar panels areprovided,that would sum up to increase in energy production. Since it is energy efficient, electric bike ischeaper and affordable to anyone.It can beused for shorter distances by people of any age. It can be contrived throughout the year. The most vital feature of the electric bike is that it does not consume fossil fuels thereby saving crores of foreign currencies. The second most important feature is it is pollution free, ecofriendly and noiseless in operation. For
  • 7. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 07 Issue: 02 | Feb 2020 www.irjet.net p-ISSN: 2395-0072 © 2020, IRJET | Impact Factor value: 7.34 | ISO 9001:2008 Certified Journal | Page 2383 offsetting environmental pollution using of on – board Electric Bike is the most viable solution. It can be charged with the help of AC adapter if there is an emergency. The Operating cost per/km isvery less and with the help of solar panel itcan lessen up more. Since ithas fewer components it can beeasily dismantledtosmall components,thusrequiring less maintenance. 10. REFERENCES [1] Aikenhead, G. S. (2011). Bicycle Applications for On- Board Solar Power Generation. 9,10. [2 ]Barve, D. S. (2016). Design and Development of Solar Hybrid Bicycle. International Journal of CurrentEngineering and Technology, 377,378,379,380. [3] Barve, D. S. (March 2016). Design and Development of Solar Hybrid Bicycle. International Journal of Current Engineering and Technology, 378,379. [4] Barve, D. S. (March 2016). Design and Development of Solar Hybrid Bicycle. International Journal of Current Engineering and Technology, 380. [5] FOGELBERG, F. (2014). Solar Powered Bike Sharing System. Goteberg, Sweden: Viktoria Swedish ICT. [6] FOGELBERG, F. (2014). Solar Powered Bike Sharing System with. Goteborg, sweden: Viktoria Swedish ICT. [7] GOODMAN, J. D. (2010, Jan 31). An Electric Boost for Bicyclists. The New York Times. [8] Prof. Palak Desai, P. D. (June 2016). Design and Fabrication of Solar Tri Cycle. International Journal of Engineering Sciences & Research, 664. [9] Hameed Majeed Saber and Deepak Lal, Assessment of Solar Energy Distribution For Installing Solar Panels Using Remote Sensing & GIS Techniques, International Journal of Advanced Research inEngineeringandTechnology(IJARET) Volume 5, Issue 10, October (2014), pp. 157-164. [10]Srijan Manish, Jitendra KumarRajak,VishnuKantTiwari and Rakesh, Quad Bike Design And Simulation: A Pre- Manufacturing Methodology, International Journal of Advanced Research in Engineering and Technology (IJARET)Volume 5, Issue 6, June (2014), pp. 6876 [11] T.Bhavani. (April 2015). Novel Design of Solar Electric Bicycle with Pedal. International Journal & Magazine of Engineering, 108. [12]Wolf,A.;Seebauer,S. Technology adoption of electricbicycles: A survey among earlyadopters.Transp.Res. Part A Policy Pract. 2014, 69, 196–211