Assembly of Machine vice, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Team Lead Succeed – Helping you and your team achieve high-performance teamwo...
Assembly of Machine vice
1. Tutorial on Machine vice
Hareesha N G
Dept of Aeronautical Engg
Dayananda Sagar College of Engg
Bangalore-78
4/16/2013 1Hareesha N G, DSCE, Blore-78
3. Exploded view of machine vice
4/16/2013 3Hareesha N G, DSCE, Blore-78
4. Exploded view of machine vice
4/16/2013 4Hareesha N G, DSCE, Blore-78
5. 4/16/2013 5
Hareesha N G, DSCE, Blore-78
Part 1: Body
Sketch on front plane or XZ plane as shown in fig. Sym protrusion distance 100 mm.
Create round R 10mm
6. 4/16/2013 6Hareesha N G, DSCE, Blore-78
Sketch on Top face or XY plane as shown in fig. Cut out using depth 57 mm
Create rounds at all corners Rad 5mm
7. 4/16/2013 7Hareesha N G, DSCE, Blore-78
Sketch on the plane as shown in fig.
select outer rectangle cutout giving 10mm depth.
select inner rectangle cutout giving 13 mm depth.
8. 4/16/2013 8Hareesha N G, DSCE, Blore-78
Select the plane as shown in fig. create sketch,. Protrude it giving 5mm height.
Create round using rad 5mm. Mirror to other side.
9. 4/16/2013 9Hareesha N G, DSCE, Blore-78
Select the plane as shown in fig. create sketch,. Protrude it giving 20 mm height.
Mirror to other side.
10. 4/16/2013 10Hareesha N G, DSCE, Blore-78
Select the parallel plane as shown in fig. create sketch,. Protrude it giving 3 mm height.
Mirror to other side.
11. 4/16/2013 11Hareesha N G, DSCE, Blore-78
Select the plane as shown in fig. create hole of dia 20mm.
Select the other end as shown in fig. create hole of dia 12 mm
12. 4/16/2013 12Hareesha N G, DSCE, Blore-78
Select the plane as shown in fig. set hole options as shown. Place the holes as shown.
Create threaded holes as shown in fig.
13. 4/16/2013 13Hareesha N G, DSCE, Blore-78
Select the plane as shown in fig. set hole options as shown. Place the holes as shown.
Counter sink holes,
use up-to next
14. 4/16/2013 14Hareesha N G, DSCE, Blore-78
Part 2: Movable Jaw
Sketch on front plane or XZ plane as shown in fig
Symmetric protrusion distance 100 mm
15. 4/16/2013 15Hareesha N G, DSCE, Blore-78
Select the plane as shown. Create sketch as shown.
Cut out through all
16. 4/16/2013 16Hareesha N G, DSCE, Blore-78
Select the plane as shown. Create threaded holes as shown use the dimensions given
in sketch as shown.
17. 4/16/2013 17Hareesha N G, DSCE, Blore-78
Select the plane as shown. Create threaded holes as shown use the dimensions given
in sketch as shown.
18. 4/16/2013 18Hareesha N G, DSCE, Blore-78
Part 3: Jaw Grip
Sketch on Top plane or XY plane as shown in fig
Symmetric protrusion distance 8 mm
Create counter sink hole of diameter 6.3 mm, countersink dia of 12 mm
19. 4/16/2013 19Hareesha N G, DSCE, Blore-78
Part 4: Screw M6
Step 1: Revolved protrusion
Sketch on front plane or XZ plane as shown in fig
Use revolve protrusion angle 1800
20. Part 5: Screw Rod
Step 1: Revolved Protrusion
Sketch on front plane or XZ plane as shown in fig
Use revolve protrusion angle 1800
4/16/2013 20Hareesha N G, DSCE, Blore-78
21. Step 2: Cut out & Thread
Sketch on Right plane or YZ plane as shown in fig
Use symmetric cut out through all
Create thread on cylindrical body
4/16/2013 21Hareesha N G, DSCE, Blore-78
22. Part 6: Washer
Create sketch on top plane or XY plane as shown in fig
Symmetric protrusion distance 3 mm
4/16/2013 22Hareesha N G, DSCE, Blore-78
23. Part 7: Nut
Create sketch on Top plane or XY plane as shown in fig
Symmetric protrusion distance 8 mm
4/16/2013 23Hareesha N G, DSCE, Blore-78
24. Part 8: Nut
Create sketch on Top plane or XY plane as shown in fig
Symmetric protrusion distance 5 mm
4/16/2013 24Hareesha N G, DSCE, Blore-78
25. Part 8: Clamping Plate
Create sketch on Top plane or XY plane as shown in fig
Symmetric protrusion distance 8 mm
Create countersink hole of dia 6.3 mm and countersink dia 12 mm
4/16/2013 25Hareesha N G, DSCE, Blore-78