Product Catologue Of Oil Mill

HAND OPERATED OIL EXPELLER

Low cost Oil Expeller very useful to crush varieties of Non edible & Edible seeds.It has many advantages the
foremost you can get a pure oil within minutes for more information please visit our website
www.rajkumaragromachinery.com
PERCENTAGES
Name Of Edible Ground Nut Groundnut
Seed Without With Husk Til Kardi Sunflower Ambadi Linseed
Husk
Oil Yield Per 100
40 –42% 25 – 32% 40 – 50% 20 - 25% 28 – 35% 20 – 22% 35 – 39%
Kgs.

Name Of Edible
Mustard Khopra Jagni Castor Cotton
Seed
Oil Yield Per 100
34 –39% 60 – 65% 35 – 38% 32 - 35% 14 – 16%
Kgs.
Name Of
Karanja Mohwa Palas Jathropha Kusum Undi Pissa Neem Seeds
Non- Edible Seed
Oil Yield Per 100
24 –28% 31 – 38% 08 – 10% 25 - 28% 30 – 34% 50 – 60% 30 – 32% 12 – 16%
Kgs.
NOTE:-
1) The oil extraction percentage entirely depends on the quality and dryness of the seeds.
2) It is essential to use boiler for crushing groundnuts without husk and castor seeds.
3) Design & specification subject to change without prior notice

OIL EXTRACTED FROM DIFFERENT KINDS OF SEEDS

Groundnut Seeds Jatropha Seeds Karanj(Pongamia) Lin seed (Flax Seed)

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

Mustard Seeds Palm Nut Saff Flower Seeds Soya been Sunflower Seeds
(Kardi)

Til (Seasame) Tung Seeds Almond Coconut Walnut

Oil Extracted From Hand Operated Oil Expeller

Oil Cake After Extraction of Oil From Hand Operated oil Expeller


SALIENT FEATURES OF KISAN TEL YANTRA/4 BOLTS/6 BOLTS/9 BOLTS
EXPORT MODEL

BED

Complete M .S. Channel sturdy frame bed, also provided with rails for
motor. These ensure complete mobility. No foundation required if
expeller is run directly with motor. Cost of foundation work & rail for
motor is saved.

HEAVY DUTY BODY

Completely leak proof sturdy steel body in single piece can be
expected to be ever lasting yet easy to open with oil bath arrangement.

BEARINGS Kisan Tel Yantra

Total 12 Nos. of Genuine & Standard Ball and Taper Roller Bearings
are fitted in the Expeller for smooth operation.

Bearing get automatically lubricated while in operation with
movements of gears. Surplus oil and grease comes in contact with
bearing, thus lubricating them for smooth working and long life
without wear & tear.

No oil or grease is wasted since oil seals are provided to prevent
leakage of oil / grease from Body.
GEARS

Main Gear & pinion are helical cut and tempered to perfect Hardening.
Long life of Gears is ensured since they are moving in mixture of oil & grease.
This results in smooth and noiseless working of the machine.

GEAR BOX

Gear Box is fitted on the top of body and not sideways.

ADVANTAGES

1) Weight of Gear Box is distributed on the Expeller Body & no Pressure is
put on the bolts.
2) Easy for fitting & maintenance.
3) There are no problems of alignment to match the Gear teeth which are 6 Bolts Export Model
Helical cut. This result in perfect fitting and smooth operation.
4) There is a view Glass provided in Gear Box to see movement of gears and supply of oil and grease.


SALIENT FEATURES OF SUPER DELUXE MODELS

Small Quantity

The Expeller can work even with small quantity of oil seeds says 5 to
10 kgs. and extract oil from it.

Space

As small space as 9X9 for 4 bolts and 20X15 for 6 bolts can
accommodate the Expeller Filter Press Motor and Pump.

Experience

Any Ordinary person with a little experience can run the machine
easily.

4 Bolts Super Deluxe Model
Main Shaft
The wear and tear parts, such as worms, collars, cone, cone
bush all made of steel and are properly case hardened to make
the same.

Gears
Main Gear and Driving Pinion Gear also of steel are given high
hardness to make them last for years.

Bearings
In places of bushes, taper roller bearings and ball bearings are
used. This helps the machine to run smoothly, consuming less
power.
Job works
The Rajkumar Expeller have proved to be very useful for doing
the job works of crushing the Oil seeds of Kisans and others and
extracting the Oil in their presence, for which Filter Press is not
required. Those who having Flour Mill etc., can conveniently
install and operate this expeller, using the same motor.

Boiler and Steam Kettle
Those who wish to do the Oil business on a big scale later on,
using mainly groundnut without husk, Cotton seeds, Castor
seeds etc., Boiler and Steam Kettle can conveniently be
installed and used.


New Model
Kisan Tel Yantra Economy Model

Semi- Automatic Kisan Tel Yantra with combined Electric panel with Filter
Press

Kisan Tel Yantra Cabinet Model


4 Bolts Cabinet Model

Capacity 10- Kgs
10-15 Kgs / hr to 400 Kg / hr

Power Source AC 380 / 440V, Three Phase 60Hz / 50Hz

Production Description

1) Semi- Automatic Oil Expeller Cabinet Model with Electric panels
.
2) Capacity: 10-15kgs/hr to 150-175 Kg/hr

3) Power Source: AC 380/440V, Three Phase 60Hz/50Hz

Production Feature

1) Simple and easy operation.
2) Compact design and need minimum floor space.
3) It is suitable for pressing of any kinds of Edible or Non Edible seeds Walnut, Ground Nut seeds,
Almond, Sun flower, saff-flower, copra flax seed Oil ,Canola, Mustard, Rapes seeds Etc Non Edible
like Neem seeds, Jatropha, Karanj and many more seeds.
4) It is possible to get the oil from the pressing of the cold raw materials.
5) Highest oil extraction rate up to 65-70 %( Coconut Crude Oil) at proper conditions.
6) Very low operational and maintenance cost.

Production System

1) Oil Extraction System with Screw Type :The compressed screw and lattice bearing are
specially designed and made of the special material to attain the uppermost extraction rate.
It is easy to clean inside the cylinder through easily disassembling the screw unit.
2) Control Panel : Easy operation by compact design.
3) Oil Filter Unit: Eliminate most of particles from expelled oil through the 2nd step filtering unit.
4) Oil cake is automatically slid to the oil cake tank after finished extraction.
5) The Expeller can be fitted with Cylinder Heating System:/steam kettle and Boiler to Maximize
the extraction rate by the preheating effect of raw materials.


FILTER PRESS WITH PUMP

Easy to install & ideal for utmost purification of all types of oil.

These filter presses are very extensively used in oil mill, chemical works etc. our filter presses
are most suitable for cleaning oil drawn from the different expelling plants. The filtering
capacity varies with the viscosity of the oil liquids and with the amount of sediments contained
therein.
Filter press consists chiefly closed grained C.I. square plates, mounted parallel on heavy flat
M.S. bars fixed on heavy iron stand. All filter presses are supplied with brass cock, collection
tray etc.
The oil or liquid pressed by a belt driven plunger pump and passed through filter cloth fitted to
either side of each plate. The filter cloth, the filtered oil leaves the chamber through cocks fitted
to each plate and flows, retain all impurities where it is collected.

Particulars of different Filter presses Manufactured by us

Size of Filter Press No. of Plates Approx. Filtration Pressure up to lbs.
in Litres per hour per Square inch
10 X 10” 10 25 15
12 X 12” 12 75 45
12 X 12” 16 100 45
12 X 12” 18 125 45
16 X 16” 12 150 45
16 X 16” 16 200 45
18 X 18” 18 250 50
24 X 24” 24 300
50

Specifications are subject to alteration without notice

STEAM BOILERS

“RAJKUMAR BOILERS” are specially made for small oil mills, which are using expellers,
and for other small scale industries, which require steam for process work. Users of small quantity
steam for their process work require a small boiler in size. It serves economically and efficiently to
the small quantity steam users whose requirements are limited to a maximum of about 100-lbs. steam
per hour. The boiler is built from M.S. Plate and special boiler tubes for a working pressure of 75 lbs.
per sq. inch and will steam efficiently and economically at lower pressure. It has all welded seams and
never in contact with fire.

“RAJKUMAR BOILERS” have quick steaming capacity and simple construction. They are easy to
operate, with economy of floor space coal. Wooden chips, groundnut shell, can also be used in this
boiler.

All the boilers will be supplied with complete set of mountings and fittings.

SPECIFICATIONS

Crushing Main
Rajkumar Oil Chamber H.P. Main Shaft Machine Size Pulley Weight
Model Capacity Shaft
Expeller Size Required Size Length Width Height Dia RPM (In Kgs.)
per/hr.(Kgs.) RPM
Kisan Tel
I. 15”X2.25” 3 10-15 32MM 3.5 FT 1.5 FT 3 FT 12” 300 150 60
Yantra
II. 4 - Bolts 18”X3” 5 or 7.5 30-40 1 1/2” X49 5 FT 2 FT 4 FT 16” 240 400 45-48

III. 6 - Bolts 24”X4” 10 70-80 1 7/8”X69” 7.5 FT 3 FT 5 FT 20” 180 1000 34-36

IV. 9 - Bolts 27”X5” 15 100-120 2 ½”X79” 9 FT 4 FT 6 FT 24” 180 1400 28-30


GROUNDNUT DECORTICATOR

HAND OPERATED GROUNDNUT DECORTICATOR

Can be operated by single person very efficiently.
Capacity : 20 to 30 Kgs. per hr.

A power operated machine is used for shelling groundnut into husks and
kernels then the husks and kernels are separated by blowers. This
equipment which is used for shelling groundnut to utilizing the seeds for
extraction of edible oil. The machine is easy to handle and simple to
operate. The breakage of seeds is controlled from 2 to 5%. This machine is
suitable for medium scale commercial units for excellent performance in
jobwork / manufacturing.
Groundnut Decorticator (without challana)
15” Model 24” Model 36” Model
100-125 250-300 600-650
Capacity
Kg. Per Hour Kg. Per Hour Kg. Per Hour
Weight 75 Kgs. 140 Kgs. 250 Kgs.
1 Hp Single 2 Hp Single Phase 5 Hp Three Phase
H.P.
Phase Motor Motor Motor

Groundnut Decorticator
(with challana)

24” Model
Capacity 250-300 Kgs. Per Hour
Weight 175 Kgs.
H.P. 2 Hp Single Phase Motor

Groundnut Decorticator
(with challana)

36” Model
Capacity 600-650 Kgs. Per Hour
Weight 350 Kgs.
H.P. 5 Hp Three Phase Motor

Product Catologue Of Oil Mill

Recomendados

Recomendados

Mais conteúdo relacionado

Último

Último (20)

Product Catologue Of Oil Mill