O SlideShare utiliza cookies para otimizar a funcionalidade e o desempenho do site, assim como para apresentar publicidade mais relevante aos nossos usuários. Se você continuar a navegar o site, você aceita o uso de cookies. Leia nosso Contrato do Usuário e nossa Política de Privacidade.

O SlideShare utiliza cookies para otimizar a funcionalidade e o desempenho do site, assim como para apresentar publicidade mais relevante aos nossos usuários. Se você continuar a utilizar o site, você aceita o uso de cookies. Leia nossa Política de Privacidade e nosso Contrato do Usuário para obter mais detalhes.

O slideshow foi denunciado.

Gostou da apresentação? Compartilhe-a!

- Introduction To Wireless Fading Cha... by Nitin Jain 79093 views
- Small scale fading by AJAL A J 21967 views
- Propagation mechanisms by METHODIST COLLEGE... 30978 views
- Signals and Antennas in mobile comp... by Madhuri Badgujar 8473 views
- Gprs architecture ppt by Arpita Sanghani 29681 views
- Chap 5 (small scale fading) by asadkhan1327 26006 views

22.171 visualizações

Publicada em

This is about the phenomenon of loss of signal in telecommunications.Fading refers to the

time variation of the received signal power caused by changes in the transmission medium or path.

Sem downloads

Visualizações totais

22.171

No SlideShare

0

A partir de incorporações

0

Número de incorporações

19

Compartilhamentos

0

Downloads

1.569

Comentários

4

Gostaram

35

Nenhuma incorporação

Nenhuma nota no slide

- 1. Presented By : Er. Rajesh Kumar INDIA SEMINAR ON FADING
- 2. FADING “ This is about the phenomenon of loss of signal in telecommunications .“
- 3. INDEX <ul><li>SMALL SCALE FADING </li></ul><ul><ul><li>Small scale multipath propagation </li></ul></ul><ul><ul><li>Multipath fading channel </li></ul></ul><ul><li>FACTORS INFLUENCING SMALL SCALE FADING </li></ul><ul><li>DOPPLER SHIFT </li></ul><ul><li>TYPES OF SMALL SCALE FADING </li></ul><ul><ul><li>Fading effect due to multipath time delay spread </li></ul></ul><ul><ul><li>Flat Fading </li></ul></ul><ul><ul><li>Frequency Selective Fading </li></ul></ul><ul><li>2. Fading effect due to Doppler Spread </li></ul><ul><ul><li>Fast Fading </li></ul></ul><ul><ul><li>Slow Fading </li></ul></ul><ul><li>STATISTICAL MODELS FOR MULTIPATH FADING CHANNELS </li></ul><ul><ul><ul><ul><li>Clarke’s model </li></ul></ul></ul></ul><ul><ul><ul><ul><li>Two ray Rayleigh Fading model </li></ul></ul></ul></ul><ul><ul><ul><ul><li>Saleh and Valenzuele Indoor statistical model </li></ul></ul></ul></ul><ul><ul><ul><ul><li>SIRCIM AND SMRCIM Indoor and Outdoor statistical model </li></ul></ul></ul></ul>
- 4. FADING Selective fading causes a cloudy pattern to appear on an FFT display. Fading (or fading channels ) refers to mathematical models for the distortion that a carrier-modulated telecommunication signal experiences over certain propagation media. Short-term fading, also known as multipath induced fading , is due to multipath propagation . Fading results from the superposition of transmitted signals that have experienced differences in attenuation , delay and phase shift while traveling from the source to the receiver. It may also be caused by attenuation of a single signal. The most common types of fading, known as "slow fading" and "fast fading", as they apply to a mobile radio environment, are explained below.
- 5. <ul><li>Fading refers to the time variation of the received signal power caused by changes in the transmission medium or path. </li></ul><ul><li>Small scale fading or simply fading is used to describe the rapid fluctuations of the amplitude, phases or multipath delays of a radio signal over a short period of time or travel distance, so that large scale path loss effects may be ignored. Fading is caused by interference between two or more versions of the transmitted signal which arrives at the receiver at slightly different times. </li></ul><ul><li>These waves, called multipath waves, combine at the receiver antenna to give a resultant signal, which can vary widely in amplitude and phase, depending on the distribution of the intensity and relative propagation time of the waves and the bandwidth of the transmitted signal. </li></ul>
- 6. EXAMPLE <ul><li>For example, consider the common experience of stopping at traffic lights and hearing a lot of static on your FM broadcast radio, which is immediately corrected if you move less than a meter. Cellular phones also exhibit similar momentary fades. The reason for these losses of signal is the destructive interference that multiple reflected copies of the signal make with itself. To understand how a signal can destructively interfere with itself, consider the sum of two sinusoidal waveforms (which are similar to modulated carrier signals) with different phases. </li></ul>
- 7. FADING IN WIRELESS COMMUNICATIONS <ul><li>In wireless communications, signal fading is caused by multi-path effect. Multi-path effect means that a signal transmitted from a transmitter may have multiple copies traversing different paths to reach a receiver. </li></ul><ul><li>At the receiver, the received signal should be the sum of all these multi-path signals. Because the paths traversed by these signals are different; some are longer and some are shorter. </li></ul><ul><li>The one at the direction of light of signal (LOS) should be the shortest. These signals interact with each other. If signals are in phase, they would intensify the resultant signal; otherwise, the resultant signal is weakened due to out of phase. This phenomenon is called channel fading. </li></ul>
- 8. SMALL SCALE MULTIPATH PROPAGATION <ul><li>Multipath in the radio channel creates small scale fading effects. The three most important effects are : </li></ul><ul><li>Rapid changes in signal strength over a small travel distance or time interval. </li></ul><ul><li>Random frequency distribution due to varying Doppler shifts on different multipath signals. </li></ul><ul><li>Time dispersion (Echoes) caused by multipath propagation delays. </li></ul>
- 9. FACTORS INFLUENCING SMALL SCALE FADING Many physical factors in the radio propagation channel influence small-scale fading. These include the following : (1) Multipath Propagation : The presence of reflecting objects and scatters in the channel creates a constantly changing environment that dissipates the signal energy in amplitude, phase and time. These effects results in multiple versions of the transmitted signal that arrive at the receiving antenna, displaced with respect to one another in time and spatial orientation. The random phase and amplitude of the different multipath components caused fluctuations in signal strength, thereby inducing Small scale fading, Signal distortion, or both. Multipath propagation often lengthens the time required for the base band portion of the signal to reach the receiver which can cause signal smearing due to inter symbol interference. (2) Speed of the mobile : The relative motion between the base station and the mobile results in random frequency modulation due to different Doppler Shifts on each of the multipath components. Doppler Shift will be positive or negative depending on whether the mobile receiver is moving towards or away from the base station.
- 10. (3) Speed of surrounding objects : If objects in the radio channel are in motion, they induced a time varying Doppler Shift on multipath components. If the surrounding objects move at a greater rate than the mobile, then this effect dominates the Small scale Fading. Otherwise, motion of surrounding objects may be ignored and only the speed of the mobile need be considered. The coherence time defines the “static ness” of the channel, and is directly impacted by the Doppler shift. (4) The transmission bandwidth of the signal : If the transmitted radio signal bandwidth is greater than the “bandwidth” of the multipath channel, the received signal will be distorted, but the received signal strength will not fade much over a local area (i.e., the small scale signal fading will not be significant). As will be shown, the bandwidth of the channel can be quantified by the coherence bandwidth which is related to the specific multipath structure of the channel. The coherence bandwidth is a measure of the maximum frequency difference for which signals are still strongly correlated in amplitude. If the transmitted signal has a narrow bandwidth as compared to the channel, the amplitude of the signal change rapidly, but the signal will not be distorted in time.
- 11. DOPPLER SHIFT
- 12. <ul><li>Consider a mobile moving at a constant velocity v , along a path segment having length d between points X and Y, while it receives signals from a remote source as illustrated in Fig (1) in previous slide : </li></ul><ul><li>The difference in path length traveled by the wave from source S to the mobile at points X and Y is </li></ul><ul><li>∆l = dcosθ = v∆tcosθ </li></ul>
- 13. <ul><li>The phase change in received signal due to difference in path lengths is therefore, </li></ul><ul><li>∆ Φ = 2 π ∆ l = 2 π v ∆ t cos θ λ λ </li></ul><ul><li>and hence the apparent change in frequency or Doppler shift, is given by fd , where </li></ul><ul><li>fd = 1 . ∆Φ = v . cosθ </li></ul><ul><li>2π ∆ t λ </li></ul>
- 14. TYPES OF SMALL SCALE FADING Fig. (2) : Types of small scale fading
- 15. FLAT FADING <ul><li>Flat fading , where the bandwidth of the signal is less than the coherence bandwidth of the channel or the delay spread is less than the symbol period . </li></ul>
- 16. Fig. (3): Flat Fading channel characteristics
- 17. FREQUENCY SELECTIVE FADING <ul><li>Frequency selective fading , where the bandwidth of the signal is greater than the coherence bandwidth of the channel or the delay spread is greater than the symbol period. </li></ul>
- 18. Fig. (4) : Frequency selective fading channel characteristics
- 19. FADING EFFECT DUE TO DOPPLER SPREAD <ul><li>Due to Doppler Effect, if a transmitter is moving away from a receiver, the frequency of the received signal is lower than the one sent out from the transmitter; otherwise, the frequency is increased. </li></ul><ul><li>In wireless communications, there are many factors that can cause relative movement between a transmitter and a receiver. </li></ul><ul><li>It can be the movement of a mobile such as a cell phone. </li></ul><ul><li>It can be the movement of some background objectives, which causes the change of path length between the transmitter and the receiver. </li></ul>
- 20. FAST FADING <ul><li>Fast Fading is a kind of fading occurring with small movements of a mobile or obstacle. </li></ul><ul><li>Depending upon how rapidly the transmitted base band signal changes as compared to the rate of change of the channel. </li></ul><ul><li>The channel may be classified either as a Flat fading or Slow fading channel. </li></ul><ul><li>In a Fast fading channel, the impulse response changes rapidly within the symbol duration. That is, the coherence time of the channel is smaller than the symbol period of the transmitted signal. This causes frequency dispersion (also called the selective fading) due to Doppler spreading, which leads to signal distortion. </li></ul>
- 21. SLOW FADING <ul><li>Slow Fading is a kind of fading caused by larger movements of a mobile or obstructions within the propagation environment. This is often modeled as log-normal distribution with a standard deviation according to the Log Distance Path Loss Model . </li></ul><ul><li>In a slow fading channel, the channel impulse response changes at a rate much slower than the transmitted base band signal s(t). In this case, channel may be assumed to be static over one or several reciprocal bandwidth intervals. </li></ul>
- 22. Fig. (5) : Type of fading experienced by a signal as a function (a) Symbol period (b) Base band signal bandwidth
- 23. STATISTICAL MODELS FOR MULTIPATH FADING CHANNELS <ul><li>Several multipath models have been suggested to explain the observed statistical nature of a mobile channel. </li></ul><ul><li>The first model presented by ossana was based on interference of waves incident and reflected from the flat sides of randomly located buildings. </li></ul><ul><li>Ossana’s model is therefore rather inflexible and inappropriate for urban areas where the direct path is almost always blocked by buildings or other obstacles. Clarke’s model is based on scattering and is widely used. </li></ul>
- 24. CLARKE’S MODEL <ul><li>Clarke developed a model where the statistical characteristics of the electromagnetic fields of the received signals of the mobile are deduced from scattering. </li></ul><ul><li>The model assumes a fixed transmitter with a vertically polarized antenna. The field incident on the mobile antenna is assumed to be comprised of N azimuthal plane waves with arbitrary carrier phases, arbitrary azimuthal angles of arrival, and each wave having equal average amplitude. </li></ul><ul><li>It should be noted that the equal average amplitude assumption is based on the fact that in the absence of a direct line-of-sight path, the scattered arriving at a receiver will experience similar attenuation over small-scale distances. </li></ul>
- 25. TWO-RAY RAYLEIGH FADING MODEL <ul><li>Clarke’s model and the statistics for Rayleigh fading are for that fading conditions and do not consider multipath time delay. </li></ul><ul><li>In modern mobile communication systems with high data rates, it has become necessary to model the effects of multipath delay spread as well as fading. </li></ul><ul><li>A commonly used multipath model is an independent Rayleigh fading two-ray model (which is a specific implementation of the generic fading simulator shown in figure below). </li></ul>
- 26. The figure shows a block diagram of the two-ray independent Rayleigh fading channel model. INPUT OUTPUT
- 27. SALEH AND VALENZUELA INDOOR STATISTICAL MODEL <ul><li>Saleh and Valenzuela reported the results of indoor propagation measurements between two vertically polarized omni directional antennas located on the same floor of a medium sized office building. Measurements were made using 10 ns, 1.5 GHz, radar-like pulses. </li></ul><ul><li>The method involved averaging the square law detected pulse response while sweeping the frequency of the transmitted pulse. Using this method, multipath components within 5 ns were resolvable. </li></ul>
- 28. SIRCIM AND SMRCIM INDOOR AND OUTDOOR STATISTICAL MODELS <ul><li>Rappaport and Seidel reported measurement at 1300 MHz in five factory buildings and carried out subsequent measurements in other types of buildings. The authors developed an elaborate, empirically derived statistical model to generate measured channels based on the discrete impulse response channel model and wrote a computer program called SIRCIM (simulation of indoor radio channel impulse-response models) . </li></ul><ul><li>SIRCIM generates realistic samples of small-scale indoor channel impulse response measurements. Subsequent work by Huang produced SMRCIM (simulation of mobile radio channel impulse response models) , a similar program that generates small-scale urban cellular and microcellular channel impulse responses. </li></ul><ul><li>These programs are currently in use at over 100 institutions throughout the world, and have been updated to include angle of arrival information for micro cell, indoor, and macro cell channels. </li></ul>
- 29. REFERENCES <ul><li>Wireless Communication </li></ul><ul><li>(T. S. RAPPAPORT, EEE Pub.) </li></ul><ul><li>Wikipedia, the free encyclopedia </li></ul><ul><li>Google.co.in </li></ul>
- 30. ANY QUERIES PLEASE ?
- 31. THANKS

Nenhum painel de recortes público que contém este slide

Parece que você já adicionou este slide ao painel

Criar painel de recortes

Thank you very much...Sir