Diamond blades for almost any application you can imagine. Browse through the range of diamond Tools

1. EX
CIT
ING
NE
W
PR
OD
UC
TS
INS
IDE
!
“World Leader In Diamond Cutting Blades & Tools”
2009
800-659-5843 RO
DUCTS
CATALOG
P
ALITY
www.national-diamond.com Diamond Blades & Tools
QU
Est. Since 1988

2. Type of equipment used General guideline: surface cutting recommenda-
with our diamond blades tion to bond. Do not use as an absolute. Select
from cutting application, locate bond then refer to
the index on next page. Choose blade from bond
Hand Held Grinder column to match bond from the list below.
Bond Code:
1. = Super Soft
Circular Hand Saw 2. = Soft
3. = Medium
4. = Hard
Handheld High Speed Saw
W. = Wood
S. = Speciality Blades
cutting Application bond to Use
Tile Saw
Asphalt . . . . . . . . . . . . . . . 4
Block, Heavy Wt. [36#] . . . . . . . 3
Block, Light Wt. [23#] . . . . . . . . 4
Bluestone . . . . . . . . . . . . . . 2
Brick Saw Brick . . . . . . . . . . . . . . . . 3
Cast Iron Pipe. . . . . . . . . . . . 1
Chattahoochee . . . . . . . . . . . 1&2
Clay Pavers . . . . . . . . . . . . . 3
Walk Behind Saw Concrete, Cured . . . . . . . . . . 2
Concrete, Green . . . . . . . . . . 4
Concrete Pavers . . . . . . . . . . 3
Concrete Pipe. . . . . . . . . . . . 3
Rail Saw Corian® . . . . . . . . . . . . . . . S
Cultured Marble. . . . . . . . . . . S
Ductile Iron . . . . . . . . . . . . . 1
Fiberglass . . . . . . . . . . . . . . S
Floor Grinder Fieldstone. . . . . . . . . . . . . . 2
Flagstone . . . . . . . . . . . . . . 2
Flint . . . . . . . . . . . . . . . . . 4
General Purpose . . . . . . . . . . 3
Glass . . . . . . . . . . . . . . . . S
Granite . . . . . . . . . . . . . . . 2
Core Driller
Hard Stone . . . . . . . . . . . . . 3
We manufacture all our diamond tools and blades to the highest Limestone (dense) . . . . . . . . . 1&2
specifications. Our factories are ISO Certified 9001 & 9002. Limestone (soft). . . . . . . . . . . 3&4
Marble . . . . . . . . . . . . . . . 2
Masonry. . . . . . . . . . . . . . . 2&3
Safety: PVC . . . . . . . . . . . . . . . . . GA Turbo
Always use blades per manufacturer’s equipment Quarry Stone [soft] . . . . . . . . . 2&3
recommendations. Never operate equipment without Rebar . . . . . . . . . . . . . . . . 1&2
blade guard. Reinforced Concrete . . . . . . . . 2
Do not exceed maximum RPM safe speed. River Rock . . . . . . . . . . . . . 1&2
Use safety equipment: OSHA required safety glasses Roots . . . . . . . . . . . . . . . . 3
Sandstone . . . . . . . . . . . . . 3&4
and hearing protection. Slate . . . . . . . . . . . . . . . . 2&3
Use blades in compliance with ANSI Code B7.1, Stone, Natural . . . . . . . . . . . 2
B7.5, and OSHA requirement 1910.215. Tarmac . . . . . . . . . . . . . . . 3
Terra Cotta . . . . . . . . . . . . . 3&4
All specifications subject to change without notice. Tile, Ceramic . . . . . . . . . . . . 2
Tile, Roof . . . . . . . . . . . . . . 3&4
VCP . . . . . . . . . . . . . . . . . GA Turbo
© Copyright 2009 DBD-Marketing
Wood . . . . . . . . . . . . . . . . W
HL/GRP Design
2 CALL FOR QUANTITY DISCOUNTS

3. SMALL DIAMATER
TURBO BLADES
4” x .080” x 7/8”-5/8” 4diYeUrotUrbo10 EURO TURBO
4.5” x .080” x 7/8”-5/8” 4.5diYeUrotUrbo10
These diamond blades have a unique cold pressed
5” x .080” x 7/8”-5/8” 5diYeUrotUrbo10
6” x .080” x 7/8”-5/8” 6diYeUrotUrbo10
castellated rim which provides fast chip free cutting.
7” x .095” x DM-5/8” 7diYeUrotUrbo10 Cuts brick, block, concrete, bluestone, flagstone,
8” x .095” x DM-5/8” 8diYeUrotUrbo10 granite, roof tile and other hard masonry materials.
9” x .095” x 7/8”-5/8” 9diYeUrotUrbo10 10mm Rim Height Use wet or dry.
10” x .095” x 7/8”-5/8” 10diYeUrotUrbo10 HS W/D 3
4” x .080” x 7/8”-5/8” 4gAtUrbo12 GRAPE APE PRO
4.5” x .080” x 7/8”-5/8” 4.5gAtUrbo12
These premium diamond blades have a unique cold
5” x .080” x 7/8”-5/8” 5gAtUrbo12
7” x .095” x DM-5/8” 7gAtUrbo12
pressed castellated rim which provides fast chip free
8” x .095” x DM-5/8” 8gAtUrbo12 cutting.
9” x .095” x 7/8”-5/8” 9gAtUrbo12 Cuts brick, block, concrete, bluestone, flagstone,
10” x .095” x 7/8”-5/8” 10gAtUrbo12 granite, roof tile and other hard masonry materials.
12mm Rim Height Use wet or dry.
HS W/D 3
12 mm
Rim Height
4” x .080” x 7/8”-5/8” 4ggtUrbo15 GREEN GIANT TURBO
4.5” x .080” x 7/8”-5/8” 4.5ggtUrbo15
These NEW 15mm rim height diamond blades provide
5” x .080” x 7/8”-5/8” 5ggtUrbo15
6” x .080” x 7/8”-5/8” 6ggtUrbo15
extra long life. They also have a unique cold pressed
7” x .095” x DM-5/8” 7ggtUrbo15 castellated rim which provides fast chip free cutting.
8” x .095” x DM-5/8” 8ggtUrbo15 Cuts brick, block, concrete, bluestone, flagstone,
10” x .095” x 7/8”-5/8” 10ggtUrbo15 granite, roof tile and other hard masonry materials.
15mm Rim Height Use wet or dry.
HS W/D 3
15 mm
Rim Height
4” x .095” x 7/8”-5/8” 4ShwAVe SHOCK WAvE
4.5” x .095” x 7/8”-5/8” 4.5ShwAVe
Our SHOCK WAVE provides that extra speed demanded
5” x .095” x 7/8”-5/8” 5ShwAVe
6” x .095” x 7/8”-5/8” 6ShwAVe
by professional users. Also the zipper style segments
7” x .095” x DM-5/8” 7ShwAVe provide extremely smooth cuts. The performance and
8” x .095” x 7/8”-5/8” 8ShwAVe life on these blades are outstanding. Try one today. Use
9” x .095” x 7/8”-5/8” 9ShwAVe this diamond blade for cutting: granite, marble, brick,
block, tile, concrete & other masonry materials.
7mm Rim Height Use wet or dry.
HS W/D 1
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 3

4. SMALL DIAMATER
TURBO BLADES
POWER WAvE 4” x .080” x 7/8”-5/8” 4dSwAVe-S
4.5” x .080” x 7/8”-5/8” 4.5dSwAVe-S
Our Supreme POWERWAVE will provide exceptional speed,
5” x .080” x 7/8”-5/8” 5dSwAVe-S
demanded by professionals. The zipper segments are loaded
with 30/40 grit diamonds for extremely fast smooth cuts. 6” x .080” x 7/8”-5/8” 6dSwAVe-S
The vented core allows water to power through the holes for 7” x .095” x DM-5/8” 7dSwAVe-S
cool running and longer blade life. These long life blades are
considered some of the best in the market today. Use this
diamond blade for cutting: granite, marble, brick, block, tile,
concrete & other masonry materials.
7mm Rim Height Use wet or dry.
HS W/D 1
TITAN TURBO 4.5” x .080” x 7/8”-20mm 4.5fhtitAn
5” x .080” x 7/8”-20mm 5fhtitAn
This precision made diamond blade is designed for an
7” x .095” x 7/8”-20mm 7fhtitAn
extremely smooth surface finish and fast cutting. The cat
claw drop segs and vented core keep this blade running
cooler for extended blade life. The MBS 960 diamonds
also assist in cutting efficiency and blade longevity.
Cuts: granite, hard stone, cured concrete and similar
surfaces.
10mm Rim Height Use wet or dry.
HS W/D 1
SAMURAI GRAN 4” x .080” x 7/8”-5/8” 4chgrAnQUAd
4.5” x .080” x 7/8”-5/8” 4.5chgrAnQUAd
We manufacture these self-propelled blades to meet
5” x .080” x 7/8”-5/8” 5chgrAnQUAd
the demands of contractors looking for consistently 7” x .095” x DM-5/8” 7chgrAnQUAd
good working tools. The wavy steel core assists in air 8” x .095” x DM-5/8” 8chgrAnQUAd
circulation and reduces friction which prolongs blade 9” x .095” x 7/8”-5/8” 9chgrAn
life and increases cutting speed. Cuts: granite, cured 10” x .095” x 7/8”-5/8” 10chgrAn
concrete & other hard masonry materials.
10mm Rim Height Use wet or dry.
HS W/D 1
SAMURAI CHARGER 4” x .080” x 7/8”-5/8” 4chSAMUrAi
4.5” x .080” x 7/8”-5/8” 4.5chSAMUrAi
This blade is built for a consistent winning performance.
5” x .080” x 7/8”-5/8” 5chSAMUrAi
The deep drop segments allow for core protection and 7” x .095” x DM-5/8” 7chSAMUrAi
long core life. A special diamond bond is engineered into 8” x .095” x DM-5/8” 8chSAMUrAi
the segments for fast cutting and long blade life. 9” x .095” x 7/8”-5/8” 9chSAMUrAi
Cuts: granite, cured concrete, roof tile and other 10” x .095” x 7/8”-5/8” 10chSAMUrAi
masonry materials.
10mm Rim Height Use wet or dry.
HS W/D 3
TORNADO 4” x .080” x 7/8”-5/8” 4chtornAdo
4.5” x .080” x 7/8”-5/8” 4.5chtornAdo
Fast and smooth, the deep drop segments allow for
5” x .080” x 7/8”-5/8” 5chtornAdo
core protection and long core life. Special diamond grit 7” x .095” x DM-5/8” 7chtornAdo
& bond is engineered into the segments for fast cutting 10” x .095” x 7/8”-5/8” 10chtornAdo
and long blade life. Cuts: granite, cured concrete, roof
tile and other masonry materials.
10mm Rim Height w/ Drop Segs Use wet or dry.
HS W/D 2
4 CALL FOR QUANTITY DISCOUNTS

5. SMALL DIAMATER
SEGMENTED BLADES
4” x .080” x 7/8”-5/8” 4diYeUroSeg10 EURO SEG
4.5” x .080” x 7/8”-5/8” 4.5diYeUroSeg10
Our .395 segmented height (10mm) Supreme Blades
5” x .080” x 7/8”-5/8” 5diYeUroSeg10
6” x .080” x 7/8”-5/8” 6diYeUroSeg10
are among the finest in the market! Outlasting most of
7” x .095” x DM-5/8” 7diYeUroSeg10 the competition by 30 to 40%. A heat treated steel core
8” x .095” x DM-5/8” 8diYeUroSeg10 provides extreme blade strength for deep cuts. Perfect
9” x .095” x 7/8”-5/8” 9diYeUroSeg10 for the contractor who wants quality at a reasonable
10” x .095” x 7/8”-5/8” 10diYeUroSeg10 price. Try these today! Medium bond, for general
purpose brick, block & concrete.
10mm Segment Height Use wet or dry.
HS W/D 3
4” x .080” x 7/8”-5/8” 4gAcoMbo12 GRAPE APE
4.5” x .080” x 7/8”-5/8” 4.5gAcoMbo12
This laser welded segmented blade is for the contractor
5” x .080” x 7/8”-5/8” 5gAcoMbo12
who has the most rugged and demanding job of going
7” x .080” x DM-5/8” 7gAcoMbo12
8” x .095” x DM-5/8” 8gAcoMbo12
through cured concrete or reinforced concrete with rebar.
9” x .095” x DM-5/8” 9gAcoMbo12
Made with G.E. best 30/40 mesh MBS 960 grade diamonds.
10” x .110” x DM-5/8” 10gAcoMbo12 The GRAPE APE delivers outstanding performance at an
affordable cost. Try this recipe of diamonds and you’ll
know why this is #1. For General purpose, concrete,
12 mm
Segment Height
brick, block and similar masonry surfaces.
12mm Segment Height Use wet or dry.
HS W/D 2/3
4” x .080” x 7/8”-5/8” 4ggSeg15 GREEN GIANT
4.5” x .080” x 7/8”-5/8” 4.5ggSeg15
The new GREEN GIANT diamond blade with it’s 15mm
5” x .080” x 7/8”-5/8” 5ggSeg15
6” x .095” x 7/8”-5/8” 6ggSeg15
jumbo segment height was designed to provide long
7” x .095” x DM-5/8” 7ggSeg15 blade life and fast cuts. Geared toward the contractor
8” x .095” x DM-5/8” 8ggSeg15 that is looking for functional value at a economical price.
10” x .095” x 7/8”-5/8” 10ggSeg15 This medium bond blade is perfect for cutting: General
purpose masonry, brick, block and concrete.
15mm Segment Height Use wet or dry.
15 mm
Segment Height HS W/D 3
4” x .080” x 7/8”-5/8” 4gAtSeg12 T-SEG PRO12
4.5” x .080” x 7/8”-5/8” 4.5gAtSeg12
Our Supreme Grape Ape T-SEG PRO12 turbo segmented
5” x .080” x 7/8”-5/8” 5gAtSeg12
design has been copied by many other companies but none
7” x .095” x DM-5/8” 7gAtSeg12
8” x .095” x DM-5/8” 8gAtSeg12
can master the supreme quality of this blade. The lightning
9” x .095” x 7/8”-5/8” 9gAtSeg12
speed of a turbo with the life of a segmented blade is sure
10” x .095” x 7/8”-5/8” 10gAtSeg12 to get the toughest jobs done with ease. Laser welded.
Ideal for cured concrete, concrete pipe, pavers, block,
clay brick with iron spots and much more.
12 mm
Segment Height
12mm Segment Height Use wet or dry.
HS W/D 2
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 5

6. HIGH SPEED
TURBO / T-SEG BLADES
SAMURAI GRAN 12” x .125” x 1”-20mm 12chgrAn
14” x .125” x 1”-20mm 14chgrAn
We manufacture this self-propelled blade to meet
the demand of contractors looking for consistently
good working tools. The wavy steel core assists in air
circulation and reduces friction which prolongs blade
life and increases cutting speed. Cuts: granite, cured
concrete & other hard masonry materials.
10mm Rim Height Use wet or dry.
HS W/D 1
TORNADO 12” x .110” x 1”-20mm 12chtornAdo
14” x .110” x 1”-20mm 14chtornAdo
Fast and smooth, the deep drop segments allow for
core protection and long core life. Special diamond grit
& bond is engineered into the segments for fast cutting
and long blade life. Cuts: granite, cured concrete, roof
tile and other masonry materials.
10mm Rim Height w/ Drop Segs Use wet or dry.
HS W/D 2
6 CALL FOR QUANTITY DISCOUNTS

7. HIGH SPEED
TURBO / T-SEG BLADES
12” x .125” x 1”-20mm 12gAtUrbo12 GRAPE APE PRO
14” x .125” x 1”-20mm 14gAtUrbo12
These diamond blades have a unique cold pressed
castellated rim which provides fast chip free cutting.
Cuts brick, block, concrete, bluestone, flagstone,
granite, roof tile and other hard masonry materials.
12mm Rim Height Use wet or dry.
HS W/D 3
12 mm
Segment Height
12” x .125” x 1”-20mm 12chtSeg12 PRO MASTER T-SEG
14” x .125” x 1”-20mm 14chtSeg12
This turbo/segmented design is engineered to meet the
14” x .125” x 20mm 14chtSeg12-20
14” x .140” x 1”-20mm 14chtSeg10.140
challenges of all general purpose cutting conditions.
16” x .125” x 1”-20mm 16chtSeg12 Heat treated steel core provides extreme blade strength
in deep cuts. This blade is a true work horse for excellent
cutting speed and great life. Medium bond, for general
purpose brick, block & concrete.
12mm Segment Height Use wet or dry.
12 mm
Segment Height
HS W/D 3
12” x .125” x 1”-20mm 12gAtSeg12 T-SEG PRO12
12” x .125” x 20mm 12gAtSeg12-20
Our Supreme Grape Ape T-SEG PRO12 turbo segmented
14” x .125” x 1”-20mm 14gAtSeg12
14” x .125” x 20mm 14gAtSeg12-20
design has been copied by many other companies but
none can master the supreme quality of this blade. The
lightning speed of a turbo with the life of a segmented
blade is sure to get the toughest jobs done with ease.
Laser welded. Ideal for cured concrete, concrete pipe,
12 mm pavers, block, clay brick with iron spots and much,
Segment Height much more.
12mm Segment Height Use wet or dry.
HS W/D 2
12” x .125” x 1”-20mm 12ShtSeg15 T-SEG SIGNATURE15
14” x .125” x 20mm 12ShtSeg15-20
We designed this blade with a double segment height
12” x .125” x 1”-20mm 14ShtSeg15
14” x .125” x 20mm 14ShtSeg15-20
for the contractor who demands longer blade life.
16” x .125” x 1”-20mm 16ShtSeg15 Besides the longer life there is also the advantage of
18” x .125” x 1”-20mm 18ShtSeg15 saving time with less blade changes on your equipment.
20” x .125” x 1”-20mm 20ShtSeg15 The segments are laser welded with a super soft bond
12” x .125” x 1”-20mm 12ShtSeg15c* for cutting: Cured concrete, reinforced concrete,
12” x .125” x 20mm 12ShtSeg15c20* rebar, concrete pipe, rigid concrete pipe (RCP) and
14” x .125” x 1”-20mm 14ShtSeg15c* refractory brick.
14” x .125” x 1”-20mm 14ShtSeg15c20* 15mm Segment Height Use wet or dry.
16” x .125” x 1”-20mm 16ShtSeg15c*
HS W/D 1 Signature
18” x .125” x 1”-20mm 18ShtSeg15c* Series
15 mm
Segment Height
*Clam shell packed
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 7

8. HIGH SPEED
SEGMENTED BLADES
RED BULL 4” x .080” x 7/8”-5/8” 4diYSegrb
4.5” x .080” x 7/8”-5/8” 4.5diYSegrb
Our contractor series, RED BULL is the perfect blade for
7” x .095” x DM-5/8” 7diYSegrb
those jobs that need low up front cost, but must meet 10” x .095” x 7/8”-5/8” 10diYSegrb
the fast paced demands of getting the job done. A solid 12” x .125” x 1”-20mm 12diYSegrb
core winner. Try one today! 14” x .125” x 1”-20mm 14diYSegrb
Cuts: general purpose, brick, block, masonry
7mm Segment Height Use wet or dry.
HS W/D 3
TOUGH-CUT PRO 12” x .125” x 1”-20mm 12diYSegpb10
12” x .125” x 20mm 12diYSegpb10-20
This is our super duty work horse, ideal for cutting all
14” x .125” x 1”-20mm 14diYSegpb10
types of surfaces. Perfect for rental yards and contractors 14” x .125” x 20mm 14diYSegpb10-20
who need low up front costs, fast cutting speed with 16” x .125” x 1”-20mm 16diYSegpb10
medium blade life. The PB10 is by far our most popular 20” x .125” x 1”-20mm 20diYSegpb10
blade. Don’t take our word for it. Find out for yourself just
what makes this our most popular item. Medium bond,
for general purpose masonry, brick, block & light duty
cured concrete.
10mm Segment Height Use wet or dry.
HS W/D 3
POWER-CUT12 12” x .125” x 1”-20mm 12diYSegpb12
12” x .125” x 20mm 12diYSegpb12-20
This new blade is a super duty work horse with 12mm
14” x .125” x 1”-20mm 14diYSegpb12
high segments that provide longer life. Perfect for rental 14” x .125” x 20mm 14diYSegpb12-20
yards and contractors who need low up front costs, fast 18” x .125” x 1”-20mm 18diYSegpb12
cutting speed with medium blade life. The PB12 is an
extremely popular blade. Don’t take our word for it. Try
one today! Medium bond, for general purpose masonry,
brick, block & light duty cured concrete.
12mm Segment Height
HS W/D 3
Use wet or dry.
12 mm
Segment Height
GREEN GIANT 12” x .125” x 1”-20mm 12ggSeg15
12” x .125” x 20mm 12ggSeg15-20
The new GREEN GIANT diamond blade with it’s 15mm
14” x .125” x 1”-20mm 14ggSeg15
jumbo segment height was designed to provide long 14” x .125” x 20mm 14ggSeg15-20
blade life and fast cuts. Geared toward the contractor 16” x .125” x 1”-20mm 16ggSeg15
that is looking for functional value at a economical price. 20” x .125” x 1”-20mm 20ggSeg15
This medium bond blade is perfect for cutting: General
purpose masonry, brick, block and concrete.
15mm Segment Height Use wet or dry.
HS W/D 3
15 mm
Segment Height
Signature
Series Blue Ribbon winner in 2007 & 2008
at the World Of Concrete
8 CALL FOR QUANTITY DISCOUNTS

9. HIGH SPEED
SEGMENTED BLADES
12” x .125” x 1”-20mm 12etorAnge15 ORANGE SLICE
12” x .125” x 20mm 12etorAnge15-20
The ORANGE SLICE is a remarkable diamond blade
14” x .125” x 1”-20mm 14etorAnge15
14” x .125” x 20mm 14etorAnge15-20
engineered with so many premium features that it truly
give the longest life and fastest cutting speed. Segments
are laser welded with Russian Cushion Cut Diamonds
in the matrix. This produces sharper edges for faster
cutting. Along with a jumbo 15mm high segment. And
you will see why this awesome blade can’t be beat.
15 mm
Segment Height Mount to a hand saw or bolt on to a walk behind saw.
Try one today! Cuts: Concrete, brick, block and similar
masonry materials. Signature
15mm Segment Height Use wet or dry.
Series
HS W/D 3
12” x .125” x 1”-20mm 12gAcoMbo12 GRAPE APE
12” x .125” x 20mm 12gAcoMbo12-20
This laser welded segmented blade is for the contractor
14” x .125” x 1”-20mm 14gAcoMbo12
who has the most rugged and demanding job of going
14” x .125” x 20mm 14gAcoMbo12-20
16” x .125” x 1”-20mm 16gAcoMbo12
through cured concrete or reinforced concrete with rebar.
16” x .125” x 20mm 16gAcoMbo12-20
Made with G.E. best 30/40 mesh MBS 960 grade diamonds.
20” x .135” x 1”-20mm 20gAcoMbo12 The GRAPE APE delivers outstanding performance at an
affordable cost. Try this recipe of diamonds and you’ll
know why this is #1. For General purpose, concrete,
brick, block and similar masonry surfaces.
12 mm 12mm Segment Height Use wet or dry.
Segment Height HS W/D 2/3
12” x .125” x 1”-20mm 12ShVAnebb15 HURRICANE SIGNATURE15
14” x .125” x 1”-20mm 14ShVAnebb15
The awesome cutting power of the new 15mm segment
20” x .125” x 1”-20mm 20ShVAnebb15
12” x .125” x 1”-20mm 12ShVAnebb15c
height SHVANEBB15 blade provides fast cuts and lasts
12” x .125” x 20mm 12ShVAnebb15c20 twice as long as regular 7mm blades. The special vented
14” x .125” x 1”-20mm 14ShVAnebb15c core and wide gullets keep this blade running cooler and
14” x .125” x 20mm 14ShVAnebb15c20 also helps remove slurry for friction free cutting. Laser
welded segments with a medium soft bond for cutting
brick, block, masonry and other similar materials.
15mm Segment Height Use wet or dry.
15 mm
Segment Height
HS W/D 3
Signature
Series
12” x .125” x 1”-20mm 12gAcncdUo MULTI-CUT CNC-DUO
14” x .125” x 1”-20mm 14gAcncdUo
Computerized laser welded numerical controlled multi-
cut diamond blade technology allows diamonds to be
arrayed in optimal position allowing the blade to perform
at peak efficiency. By far this blade is the most efficient
diamond cutting blade in the market. This new high tech
blade will normally achieve about 30-50% faster cutting
and certainly twice the blade life of any blade now
manufactured. Cuts: Hard concrete, concrete pavers,
reinforced concrete, brick pavers, brick, block,
asphalt & green concrete.
10mm Segment Height Use wet or dry.
HS W/D 2/4
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 9

10. HIGH SPEED
MULTI-CUT BLADES
SUPER SONIC - SUPREME 12” x .125” x 1”-20mm 12SUperg
12” x .125” x 1”-20mm 12SUperg20
NEW TECHNOLOGY: Cuts the widest variety of materials
14” x .125” x 1”-20mm 14SUperg
in the market. This highly aggressive diamond blade is built
14” x .125” x 1”-20mm 14SUperg20
with a mixed variety of diamond grit sizes in the segments. 16” x .125” x 1”-20mm 16SUperg
Drop segs along with a vented core also help this blade 18” x .125” x 1”-20mm 18SUperg
drive through many surfaces with ease. Cuts: Cured 20” x .125” x 1”-20mm 20SUperg
concrete, brick, block, concrete pipe, green concrete,
pavers over sand, asphalt & asphalt over concrete.
Use with hand held or tabletop saws.
Signature 9/14mm Segmented Height Use wet or dry.
Series
HS W/D 2/4
SUPER SONIC 12” x .125” x 1”-20mm 12chSUperg
14” x .125” x 1”-20mm 14chSUperg
This re-engineered multi use blade cuts a wide variety
of surface materials. The very aggressive diamond blade
is built with a mixed variety of diamond grit sizes in the
segments. Drop segs along with a vented core also help
this blade drive through many materials with ease. Cuts:
Cured concrete, brick, block, concrete pipe, green
concrete, pavers over sand, asphalt & asphalt over
concrete. Use with hand held or tabletop saws.
9/14mm Segmented Height Use wet or dry.
HS W/D 2/4
RED SUPER SONIC 12” x .125” x 1”-20mm 12chSUpergr
14” x .125” x 1”-20mm 14chSUpergr
This new-design premium blade cuts a wide variety of
surface materials. The highly aggressive diamond blade
is built with a mixed variety of diamond grit sizes in the
segments. Drop segs along with a vented core also help this
blade drive through many surfaces with ease. Cuts: Cured
concrete, brick, block, concrete pipe, green concrete,
pavers over sand, asphalt & asphalt over concrete.
Use with hand held or tabletop saws.
9/14mm Segment Height Use wet or dry.
HS W/D 2/4
GT LION 4” x .080” x 7/8”-5/8” 4gtlion
4.5” x .080” x 7/8”-5/8” 4.5gtlion
This Vacuum Brazed “LION” power blade cuts a
5” x .080” x 7/8”-5/8” 5gtlion
wide variety of hard surfaces. The MBS950 surface 6” x .080” x 7/8”-5/8” 6gtlion
set diamonds, give this blade the power needed for 7” x .095” x DM-5/8” 7gtlion
aggressive cutting. Also built with a highly tensioned 8” x .095” x DM-5/8” 8gtlion
steel .125 core for true track running and long life. 10” x .095” x 7/8”-5/8” 10gtlion
Cuts: Ductile iron, cast iron, PVC, reinforced concrete, 12” x .125” x 1”-20mm 12gtlion
reinforced concrete pipe, steel, wood. 14” x .125” x 1”-20mm 14gtlion
THE ULTIMATE EMERGENCY RESCUE BLADE
Signature
Series Use wet or dry.
HS W/D 1
IRON MAN SIGNATURE 12” x .125” x 1”-20mm 12ShdUctile
12” x .125” x 20mm 12ShdUctile-20
The awesome cutting power of our new IRON MAN
14” x .125” x 1”-20mm 14ShdUctile
SIGNATURE will make you a believer in the Signature
14” x .125” x 20mm 14ShdUctile-20
blade series for nonstop day-in and day-out cutting. We
16” x .125” x 1”-20mm 16ShdUctile
manufactured this laser welded blade with 50mm segment
16” x .125” x 20mm 16ShdUctile-20
lengths and utilized 960 grade diamonds with mesh mix of
40/50 and 50/60. These blades get the job done. Both sides
of the blade are coated with diamonds concentrated in a swirl
pattern, ideal for beveling. Cuts ductile pipe, cast iron pipe,
ridged concrete pipe and cured concrete. Use wet or dry.
HS W/D 1
10 CALL FOR QUANTITY DISCOUNTS

11. HIGH SPEED
ASPHALT BLADES
7” x .095” x DM-5/8” 7ASphcer WILD CAT
8” x .095” x DM-5/8” 8ASphcer
Our abrasive resistant “Carborundum” blade has absolutely
10” x .095” x 7/8”-5/8” 10ASphcer
no diamonds in the matrix. This blade is impregnated with a
12” x .125” x 1”-20mm 12ASphcer special ceramic carbide grit, which brings a cost savings to
12” x .125” x 20mm 12ASphcer20 the contractor. Undercut protection is provided evenly through
14” x .125” x 1”-20mm 14ASphcer the gullets to prevent pinching or binding when cutting. A sure
14” x .125” x 20mm 14ASphcer20 winner when you are interested in up front costs. Cuts asphalt &
20” x .125” x 1”-20mm 20ASphcer green concrete, also use on roof tiles & light weight block.
10mm Segment Height Use wet or dry.
HS W/D 4
7” & 8” have 8mm Segment Height
12” x .125” x 1”-20mm 12hkASph10 PANTHER
14” x .125” x 1”-20mm 14hkASph10
Our heavy duty contractor series, PANTHER is the perfect
blade for those jobs that need low up front cost, but must
meet the fast paced demands of getting the job done.
Built with drop segments for undercut protection. Core
thickness .125 inch. Cuts: Asphalt, green concrete,
light weight block.
10mm Segment Height Use wet or dry.
HS W/D 4
8” x .125” x 1”-20mm 8chASph CHEETAH-1
10” x .125” x 1”-20mm 10chASph
The Cheetah-1 is an outstanding quality asphalt blade.
12” x .125” x 1”-20mm 12chASph
14” x .125” x 1”-20mm 14chASph
This professional blade with its laser welded segments
16” x .125” x 1”-20mm 16chASph provides very accurate cutting. Features undercut
18” x .125” x 1”-20mm 18chASph protection, pin hole drive and high diamond content.
20” x .125” x 1”-20mm 20chASph Also ideal for walk behind saws as well! Cuts: asphalt,
light weight block, green concrete, & other abrasive
materials.
7mm Segment Height Use wet or dry.
HS W/D 4
12” x .125” x 1”-20mm 12Shgreen THE HULK SIGNATURE
12” x .125” x 20mm 12Shgreen20
14” x .125” x 1”-20mm 14Shgreen We designed this blade for the contractor who needs
14” x .125” x 20mm 14Shgreen20 the best cutting tool in the industry. This laser welded
16” x .125” x 1”-20mm 16Shgreen segmented blade is perfect for low HP walk behind saws.
16” x .125” x 20mm 16Shgreen20 The unique feature of this blade is its undercut protection
18” x .125” x 1”-20mm 18Shgreen system with C3 carbide inserts. This blade cuts and clears
20” x .125” x 1”-20mm 20Shgreen
12” x .125” x 1”-20mm 12Shgreenc
a cutting path in one motion. The hard bond is perfect for
12” x .125” x 20mm 12Shgreenc20 cutting asphalt, green concrete & light weight block.
14” x .125” x 1”-20mm 14Shgreenc 10mm Segment Height Use wet or dry.
14” x .125” x 20mm 14Shgreenc20 HS W/D 4 Signature
Series
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 11

12. PROFESSIONAL BLADES
PRE STRESSED
UNIvERSAL EARLY ENTRY BLADE
• Cuts Green Concrete Within 3 Hours Of Finish
• Universal Arbor Fits All Early Entry Green Concrete Saws.
• High Grade MBS Diamonds For Consistent Cutting, Blade After Blade.
• Best Price Value In The Market, longer Life & Faster Cuts.
Size Item Number Thickness Seg. Height Please Specify Bond
5” 5CEREECUT .095 10mm Hard Med. M. Soft Soft
5.5” 5.5CEREECUT .095 10mm Hard Med. M. Soft Soft
6” 6CEREECUT .100 10mm Hard Med. M. Soft Soft
8” 8CEREECUT .100 10mm Hard Med. M. Soft Soft
10” 10CEREECUT .100 10mm Hard Med. M. Soft Soft
12” 12CEREECUT .120 10mm Hard Med. M. Soft Soft
12” 12CEREECUT .250 10mm Hard Med. M. Soft Soft
13.5” 13.5CEREECUT .120 10mm Hard Med. M. Soft Soft
13.5” 13.5CEREECUT .250 10mm Hard Med. M. Soft Soft
14” 14CEREECUT .120 10mm Hard Med. M. Soft Soft
14” 14CEREECUT .250 10mm Hard Med. M. Soft Soft
*Skid plate shield - included FREE with each blade - attaches
to worn skid plate to protect concrete joint against spalling and
raveling.
*Universal CEREECUT are color coded to match different aggregate
conditions.
Use wet or dry.
LS W/D ☛
THE “BANGER”
Concrete Cutting At It’s Best
• High Grade MBS impact/heat resistant diamonds for consistent cutting, blade after
blade.
• Resin filled core to suppress noise, perfect for enclosed locations.
• Longer life, and faster, free cutting than any blade on the market today
• Custom made for prestressed from 40 years of experience in the market
• Cuts your blade cost dramatically
• All test results on 8,500 P.S.I. prestressed concrete with 4 strand cable, conducted by
a DOT, pre qualified commercial contractor.
• Sound Dampening Core
• SUPER SOFT bond
Ideal for: prestressed concrete, pre-cast, hollow core plank, high psi cured concrete.
• All blades custom manufactured to your specifications •
Select specifications bellow:
1. Blade Diameter from 12” - 48”
Standard Sizes: 12”, 14”, 16” Wet or Dry
20”, 24”, 30”, 32”, 36”, 42”, 48” Wet Only
2. Thickness .125 to .310
3. Laser Welded or Silver Solder
4. Arbor size based on equipment.
Part# SHPRESTRESSED
12 CALL FOR QUANTITY DISCOUNTS

13. PROFESSIONAL BLADES
DOT PRO-SERIES
PRO SERIES
The PRO-BLADE is truly the finest quality professional blade in the market. With a 40% diamond concentration and a
10mm (.395) segment height, this blade cuts 30% faster and lasts up to 40% longer. Blade specifications meet or exceed
demands of Department Of Transportation & Professional Concrete/Asphalt Cutters. These blades are perfect for high
horsepower & low RPM walk behind saws. Run wet only - Do not run dry.
PRO-1 PRO-2 PRO-3 PRO-4
Cuts:
• Cuts:
• Cuts:
• Cuts:
•
• CURED CONCRETE • CURED CONCRETE • ASPHALT • ASPHALT OVER
• HARD AGGREGATE • SOFT TO MED • GREEN CONCRETE CONCRETE
• & SIMILAR MATERIALS AGGREGATE Part# PRO3ASPH Part# PRO4AOC
Part# PRO1CC • & SIMILAR MATERIALS LS W 4 LS W 3
Part# PRO2CC
LS W 2
LS W 3
• Some blades are available Laser Welded, call for availability.
Blade Thickness
Diameter
.125 .155 .187 .250 .312 .375 .500 .625
12 • •
14 • • •• • •• • • • • • • • • •
16 • • •• • •• • • •
18 • • •• • • •• • • • • • • • •
20 • • •• • • •• • •
24 • • •• •• • •• • •
26 •• • • •• • • • •
30 • •• • • • • •
36 •• • • •
42 •• •
48
* These blades can be made in any thickness or size up to 54”. Allow 3 -4 weeks for delivery on special orders.
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 13

14. PROFESSIONAL BLADES
DOT PRO-SERIES
ULTRA PRO NEW
What makes our ULTRA CNC PRO Series by
recoMMended ApplicAtion chArt
far the best cutting pro blade in the market
is the universal diamonds in the segments. hp Very hard Med. hard Medium Med. Soft
The innovative technology in these diamond
blades achieves both longer lifetime and 25HP- FX40 FX30 FX30 FX30
faster cutting by perfectly aligning diamond
grits in the bond matrix. 35HP FX60 FX50 FX50 FX50
In conventional diamond tools, the cutting
speed has been inversely proportional 65HP+ FX90 FX60 FX60 FX60
to the life of tools. Through this epoch-
manufacturing of the CNC technology, these AGGREGATE CLASSIFICATION MAP OF THE UNITED STATES
diamond blades will experience remarkable MED. SOFT MEDIUM MED. HARD VERY HARD
enhancement of cutting performance in
speed and life simultaneously. Unlike old
technology that specify diamonds by grit
size for different aggregate hardness, the ULTRA CNC PRO blades are built to cut
easily through those tough demanding jobs. ULTRA CNC PRO will cut all cured
concrete regardless of aggregate as it is designed for aggregate specific jobs tailored
to all cutting conditions and aggregate locations . After years of research and testing
both in house and through independent laboratories the finding results show the
ULTRA CNC PRO Series outperformed the competition by twice as much in cutting
speed and longevity.
• Double laser welded
• Highest concentration of MBS970 diamonds
• Run wet for best performance
for best performance select your blade by using the charts provided in this page
to match cutting equipment hp to aggregate classification map that best apply for
your cutting surface. Try one today!
Part# SHCNCFX
Diameter FX x Segment Height
x
Thickness FX30 x 10mm FX40 x 10mm FX50 x 10mm FX60 x 10mm FX70 x 13mm FX90 x 13mm
12” x .125” • • • †
• †
12” x .145” • • • †
12” x .160” • †
14” x .125” • • • †
• †
14” x .145” • • • †
14” x .160” • • • †
16” x .125” • • • †
• †
16” x .145” • • • †
16” x .160” • • †
• †
18” x .125” • • • †
• †
18” x .145” • • • • †
18” x .160” • • †
• †
• •
18” x .187” • †
• †
20” x .125” • • • †
• †
20” x .145” • • • †
20” x .160” • • †
• †
• •
20” x .187” • †
• †
22” x .145” • • • †
22” x .160” • • †
• †
• •
22” x .187” • †
• †
24” x .145” • • • †
24” x .160” • • †
• †
• •
24” x .187” • †
• †
26” x .145” • †
26” x .160” • • • • †
• •
26” x .187” • †
• †
30” x .160” • • •
30” x .187” • • •
32” x .160” • • •
32” x .187” • • •
36” x .160” • • •
36” x .187” • • † These
•
blades are also available in 13mm segment height for longer life. Please specify when ordering.
14 CALL FOR QUANTITY DISCOUNTS

15. PROFESSIONAL BLADES
GRANITE / STONE VENEER
42” x .250” 42ShcncSAnd THIN STONE vENEER CNC
48” x .250” 48ShcncSAnd
These new veneer CNC professional diamond saw
blades are built with solid cores for both low and high
13 mm
Segment Height horse powered saws. Segments are impregnated
with high quality diamond and utilizes the Advanced
Other sizes & arbors available. Arrangement Technology for productivity and versatility
CALL FOR DETAILS of cutting a wide variety of surfaces. These blades are
the most universal on the market today and can be used
with many different saw systems, gantry, fixed, rail, etc.
12” x .125” x 50mm-60mm 12cncgrAnite CNC GRANITE
Patent pending CNC technology gives maximum
productivity with the lowest possible cost per inch/
foot cut. MBS 960 diamonds are individually placed in
strategic positions to maximize cutting performance.
And provides 50% to 100% improvement in blade life
and cutting speed. Excellent for cutting Thin Veneer.
CNC granite blades offer high cutting ability which
results in reduced energy usage and higher productivity
than normal blades.
10mm Segment Height Use wet only
HS W 2
14” x .125” x 50mm-60mm 14dSilAMpo DSILAMPO
16” x .125” x 50mm-60mm 16dSilAMpo
The DSILAMPO blade is engineered to the highest
specifications. This blade utilizes the extreme high
strength, thermal stabilized Saw-Grade Diamonds in the
segments. Silent core built by Edesso and guaranteed
not to separate. The 20mm segment height gives the
fabricator an opportunity to run longer and gain more
life with this quality product. Also the aggressive chip
free cutting is why this blade is considered tops in the
industry. Fits rail, bridge and gantry saws.
20mm Segment Height Use wet only
HS W 2
14” x .125” x 50mm-60mm 14idlgS IDLGS
16” x .125” x 50mm-60mm 16idlgS
Our Granite silent series are manufactured to the highest
18” x .125” x 50mm-60mm 18idlgS
20” x .125” x 50mm-60mm 20idlgS
standards. Starting with our German copper centered
core by EDESSO a true sandwich technology guaranteed
not to separate. Our 10mm & 20mm segment heights
give the fabricator an opportunity to seek out which is
most cost effective for their use. Only the finest high
strength, thermally stable diamonds are used in the
segments. Fast aggressive chip free cutting is this blades
trademark. All sizes in stock and ready to ship anywhere
in the world. Full 100% money back guarantee!
Fits rail, bridge and gantry saws. Granite.
10mm Segment Height Use wet only
HS W 2
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 15

16. CONTINUOUS RIM
TILE BLADES
POWER STREAK 4” x .080” x 7/8”-5/8” 4chtlSec
4.5” x .080” x 7/8”-5/8” 4.5chtlSec
This premium Power Streak series diamond blade utilizes
5” x .080” x 7/8”-5/8” 5chtlSec
special grade diamonds for very smooth cutting and long 7” x .080” x DM-5/8” 7chtlSec
life. The 10mm rim height yields long blade life. Perfect 8” x .080” x 5/8” 8chtlSec
for granite, ceramics, stone, porcelain, tile, limestone 9” x .080” x 5/8” 9chtlSec
and similar surfaces. Use wet except for 4, 4.5 & 5 inch, 10” x .080” x 5/8” 10chtlSec
these can be used wet or dry.
10mm Rim Height
HS ☛ 2
SILvER STREAK 4” x .080” x 7/8”-5/8” 4ShhottlS
4.5” x .080” x 7/8”-5/8” 4.5ShhottlS
Our hot pressed .395 continuous rim tile blades are ideal
5” x .080” x 7/8”-5/8” 5ShhottlS
for all types of tile, quarry, porcelain, slate, limestone, 7” x .080” x DM-5/8” 7ShhottlS
granite, etc... for the contractor who wants quality at a 8” x .080” x 5/8” 8ShhottlS
reasonable price. Smooth chip free cutting is due to the 9” x .080” x 5/8” 9ShhottlS
utilization of 50/60 mesh size diamonds thus affording 10” x .080” x 5/8” 10ShhottlS
the speed you’re after. Use wet except for 4, 4.5 & 5 inch, 12” x .110” x 1” 12ShhottlS
these can be used wet or dry. 14” x .110” x 1” 14ShhottlS
10mm Rim Height
HS ☛ 2
THE PROFESSIONAL 7” x .080” x DM-5/8” 7SttlS
8” x .080” x 5/8” 8SttlS
Our STTLS series is built for the high end user customer
10” x .080” x 5/8” 10SttlS
who doesn’t mind paying a reasonable price for the best 12” x .110” x 1” 12SttlS
blade he can get. The STTLS will cut hard vitreous
ceramics, porcelain, limestone, marble & granite, like 10” x .080” x 5/8” 10StJSlot
no other blade on the market. Call today to make your 12” x .110” x 1” 12StJSlot
life easier.
7mm Rim Height Use wet.
HS W 1
WEDGE CUT 4” x .060” x 7/8”-5/8” 4dMwedgecUt
4.5” x .060” x 7/8”-5/8” 4.5dMwedgecUt
Our Wedge Cut blade is for use in the fabrication shop
7” x .060” x DM-5/8” 7dMwedgecUt
and for fabrication in the field. It is truly guaranteed to 8” x .060” x DM-5/8” 8dMwedgecUt
give you smooth chip free cutting on marble, granite 10” x .065” x 7/8”-5/8” 10dMwedgecUt
and porcelain. Also can be used on up to 20HP saws. 12” x .080” x 7/8”-5/8” 12dMwedgecUt
Truly for the professional who needs the best blade to 14” x .080” x 7/8”-5/8” 14dMwedgecUt
suit their discriminating customer’s taste.
7mm Rim Height Use wet.
HS W 1
16 CALL FOR QUANTITY DISCOUNTS

17. PROFESSIONAL BLADES
SPECIALTY
4” x .040” x 7/8”-20mm-5/8” 4chelSlot RAZOR
4.5” x .040” x 7/8”-20mm-5/8” 4.5chelSlot
The “U” Slot electroplated diamond blades are
5” x .040” x 7/8”-20mm-5/8” 5chelSlot
6” x .040” x 7/8”-20mm-5/8” 6chelSlot
designed for rugged and aggressive cutting of marble,
7” x .040” x DM-5/8” 7chelSlot fiberglass, Corian™ & other man made materials.
The discriminating customer will appreciate the fast
aggressive cutting action of the EL SLOT. These should
be used wet but can run dry for short runs.
5mm Segment Height
HS W/D 4
4” x .050” x 7/8”-5/8” 4chelectroSeg TSUNAMI
4.5” x .050” x 7/8”-5/8” 4.5chelectroSeg
These Electroplated Segmented blades are built with a
5” x .050” x 7/8”-5/8” 5chelectroSeg
super bond that holds the diamonds rigidly in place, while
7” x .050” x 7/8”-5/8” 7chelectroSeg
providing exposed diamonds to cut the work piece. The
special plating on these blades provide for fast chip free
cutting. Ideal for cutting fiberglass, composites, plastics,
graphite and marble. Use these blades on hand held or
stationary machines. These should be used wet but can
run dry for short runs.
5mm Segment Height
HS W/D 4
14” x .160” x Special 14gtringSAw UNIvERSAL RING SAW BLADE
14” x .225” x Special 14gtringSAw.225
This blade provides extreme cutting depths when
*Drive Wheel Included
mounted on the proper hand held saw. Premium grade
ring saw blade for hard materials is perfect for concrete
walls, precast concrete and concrete pipes. Premium
grade ring saw blade for hard materials.
8mm Segment Height Use wet or dry.
HS W/D 3
14” x .160” x Special 14cncringSAw CNC RING SAW
*Drive Wheel Included The CNC cutting advantage, 35% faster and twice the
blade life. What makes this blade so outstanding is the
patented diamond placement in the matrix. This prevents
premature diamond failure due to the lack of crushed
or shattered diamonds. Our new diamond system just
keeps... Cutting... Longer... Faster.
Cuts: Cured concrete, concrete with rebar and similar
surfaces.
8mm Segment Height Use wet or dry.
HS W/D 2
12” x .150” x 1”-20mm 12root ROOT RIPPER - FIRE RESCUE
12” x .150” x 20mm 12root20
The first choice for fire rescue. This blade cuts and rips
14” x .150” x 1”-20mm 14root
14” x .150” x 20mm 14root20
through roofs and wall siding, as well as the metal in autos
and trucks. Making entry more accessible for emergency
situations. This blade is also a perfect tool for the nursery
industry, forestry division and farming community to use
for quick cutting of tree roots. Root Rippers are edged
with C3 carbide & laser welded.
12mm Segment Height Use wet or dry.
HS W/D
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 17

18. RESTORATION
CRACK CHASERS
CRACK SEGGY 4” x .375” x Threaded 4gtcrAckt
4” x .375” x Non-threaded 4gtcrAck
These wheels efficiently widen existing cracks and
5” x .375” x Threaded 5gtcrAckt
provide an ideal groove for sealing preparation. The 5” x .375” x Non-threaded 5gtcrAck
high percentage of diamonds in the matrix provide for 7” x .375” x Threaded 7gtcrAckt
excellent speed and long wheel life. 7” x .375” x Non-threaded 7gtcrAck
Use wet or dry. 8” x .375” x Threaded 8gtcrAckt
HS W/D 2 8” x .375” x Non-threaded 8gtcrAck
CRACK SEGGY PREMIUM 4” x .375” x 7/8”-5/8” 4ShcrAckV
This v shaped segmented rim crack chaser wheel
efficiently widens existing cracks and provides an ideal
groove for sealing preparation. Perfect companion tool
for widening floor seams to lay down water, electrical
and other under surface materials.
Use wet or dry.
HS W/D 2
CRACK TURBO 4” x .375” x Threaded 5/8-11 4ShcrAck
This high diamond concentrated wheel is the fastest
and most effective way to widen existing cracks. These
are .375 thick and come with a 5/8 by 11 thread. This
pro-series the 10V is the best on the market of its kind-
guaranteed!
Use wet or dry.
HS W/D 2
18 CALL FOR QUANTITY DISCOUNTS

19. RESTORATION
TUCK POINTERS
4” x .250” x 7/8”-5/8” 4gASAndtp DUO-TUCK
4.5” x .250” x 7/8”-5/8” 4.5gASAndtp
Our Grape Ape Tuck Series, Duo-Tuck (a sandwich tuck
5” x .250” x 7/8”-5/8” 5gASAndtp
7” x .250” x 7/8”-5/8” 7gASAndtp
pointer) provides superior cutting ability for aggressive
and rapid mortar removal with a minimum of equipment
strain. Less friction means faster grinds.
10mm Segment Height Use wet or dry.
HS W/D 2
4” x .375” x 7/8”-5/8” 4gASAndtriptp TRIP-TUCK
4.5” x .375” x 7/8”-5/8” 4.5gASAndtriptp
Our Grape Ape Tuck Series, Trip-Tuck (a sandwich tuck
5” x .375” x 7/8”-5/8” 5gASAndtriptp
pointer) provides superior cutting ability for aggressive
and rapid mortar removal with a minimum of equipment
strain. Less friction means faster grinds.
10mm Segment Height Use wet or dry.
HS W/D 2
4” x .250” x 7/8”-5/8” 4diYtpS BLASTER
4.5” x .250” x 7/8”-5/8” 4.5diYtpS
Our 10mm segmented height Supreme Tuck Points are
5” x .250” x 7/8”-5/8” 5diYtpS
7” x .250” x 7/8”-5/8” 7diYtpS
among the best on the market. By far our most popular
tuck pointer. For those looking for long life & fast grinding
speeds at a low cost. Find out today what so many of our
customers already know about our line. We Guarantee
Your Satisfaction!
• Also available in .375 & .500 thickness •
Call for pricing !
10mm Segment Height Use wet or dry.
HS W/D 2
4” x .250” x 7/8”-5/8” 4gbtp.250 CHARGER-T
4.5” x .250” x 7/8”-5/8” 4.5gbtp.250
The body design and 10mm high diamond segments
5” x .250” x 7/8”-5/8” 5gbtp.250
make this unique tuck pointer extremely aggressive
while providing a long blade life. Fast speeds make this
a great companion tool for restoration contractors.
10mm Segment Height Use wet or dry.
HS W/D 3
= Blade Speed
= Run Wet or Dry
= Bond (pg. 2)
CALL FOR QUANTITY DISCOUNTS 19

20. CORE DRILLING
COREBITS
SEGMENT CLOSE-UP CONTRACTOR DRY SERIES 1” x 10” x 5/8”-11 1chdrYcorebit
1.5” x 10” x 5/8”-11 1.5chdrYcorebit
These premium CONTRACTOR DRY core bits are built
2” x 10” x 5/8”-11 2chdrYcorebit
for those job locations that have no water feed. Body 2.5” x 10” x 5/8”-11 2.5chdrYcorebit
air vents allow fast, clean drilling and extraction of filled 3” x 10” x 5/8”-11 3chdrYcorebit
substance. Perfect for block. 3.5” x 10” x 5/8”-11 3.5chdrYcorebit
4” x 10” x 5/8”-11 4chdrYcorebit
Do not use in reinforced concrete. 4.5” x 10” x 5/8”-11 4.5chdrYcorebit
Use on angle grinders. 5” x 10” x 5/8”-11 5chdrYcorebit
7mm Segment Height 6” x 10” x 5/8”-11 6chdrYcorebit
SEGMENT CLOSE-UP
PROFESSIONAL DRY SERIES 1” x 10” x 5/8”-11 1ShdrYcorebit
1.25” x 10” x 5/8”-11 1.25ShdrYcorebit
These supreme PROFESSIONAL DRY core bits are built
1.5” x 10” x 5/8”-11 1.5ShdrYcorebit
for those job locations that have no water feed. High 1.75” x 10” x 5/8”-11 1.75ShdrYcorebit
quality diamonds and additional segments provide 2” x 10” x 5/8”-11 2ShdrYcorebit
longer life and faster cuts. Body air vents allow fast, 2.25” x 10” x 5/8”-11 2.25ShdrYcorebit
clean drilling and extraction of filled substance. Perfect 2.5” x 10” x 5/8”-11 2.5ShdrYcorebit
for block. 3” x 10” x 5/8”-11 3ShdrYcorebit
3.5” x 10” x 5/8”-11 3.5ShdrYcorebit
Do not use in reinforced concrete. 4” x 10” x 5/8”-11 4ShdrYcorebit
Use on angle grinders. 4.5” x 10” x 5/8”-11 4.5ShdrYcorebit
8mm Segment Height 5” x 10” x 5/8”-11 5ShdrYcorebit
6” x 10” x 5/8”-11 6ShdrYcorebit
20 CALL FOR QUANTITY DISCOUNTS