2. About Glass Balustrading
Balustrades are mainly used to protect people from
falling down stairs, porches or balconies.
They also provide a structural integrity to the stairs or
floor, apart from looking good and providing security.
They are made of different material like wood, steel
and glass.
3. Advantages of Glass Balustrading
The primary reason for having glass balustrade system
is the chic and modern look they impart to the house.
Glass also requires very less maintenance when
compared to other materials.
There's no need for repainting it every couple of years.
4. Advantages continued..
It gives a 'free light movement' effect. This basically
means the house looks airy and somewhat less
cluttered when glass balustrading is installed.
Glass balustrading also avoids the spacing between
balusters, that is observed in other materials.
5. Selection
For a good installation, you need to measure the area
with the least amount of error.
Measure the length, breadth and the height of the
stairs. In case of a room, do this from wall-to-wall.
Hire a licensed contractor dealing in installations to get
a more generic approach.
6. Selection continued..
The contractor should be well experienced in cutting,
drilling, sawing and aligning of the glass.
Ensure that the area is safe when installation is in
progress, as injuries can occur with stray pieces of
glass lying around.
7. Maintenance
• Cleaning:
Glass balustrades don't require as much maintenance
as others. Regular cleaning using a solution of mild
detergent and water is enough to keep it shining and
healthy.
Don't use strong alcohol-based solutions.
Use dry cloth to clean afterward.
8. Maintenance continued..
• Protection:
You can protect the glass using a wax coating. This
will reduce the frequency and the total time of cleaning
required by the structure.
Some protective glass coatings that protect the glass
from damage and dirt are also available.
9. Maintenance continued..
• Checking:
• Regular checking is essential for your glass
balustrades. This should be done once in every few
months. The whole process is simple and doesn't take
more than a few minutes.
• This ensures that the glass is damage-free. Any
damage should be immediately corrected to avoid
ruining the whole balustrade.