1. SED2 Drive Applications

2. Simple Applications INPUTS OUTPUTS ACTION 0-10 V On Fault Reset Relay 1 -> Fault Relay 2 -> Run

3. Standard I/O 0-10 V 2-10 V 0-20 mA 4-20 mA Programmable functions Form C contacts Programmable functions 30VDC, 5A 240VAC, 2A 2 x analog outputs 2 x digital outputs RS-485 P1 N2 USS LonWorks (opt.) Modbus (opt.) 0-10 V 2-10 V 0-20 mA 4-20 mA Ni 1000 2 x analog inputs 6 x digital inputs 1 x motor PTC Insulated Programmable functions PNP or NPN (sink/source) SED2

6. Ni 1000 I/O SED2 Ni 1000 Analog input Digital input 1 Safety Input

9. Pump Staging I/O SED2 2 x analog input 6 x digital input 2 x digital output 0-10 volt Pressure Transmitter 1 On Command 1 safety input 2 nd stage pump 3 rd stage pump

14. Static Pressure Control I/O 2 x analog input 6 x digital input SED2 0-10 volt Pressure transmitter 1 On Command 1 Safety Static Pressure Switch

15. Bundled Package The SED2 is equipped with TEC application 2722 Which includes 99 subpoints for monitoring and control (See Attached Document for TEC Schedule)

16. Control Board

17. Control Terminals * Can also be configured as NI1000 inputs. Digital Inputs Terminals Parameter Default 1 5 P0701=1 ON right 2 6 P0702=12 Reverse 3 7 P07a03=9 Fault Acknowledge 4 8 P0704=15 Fixed Frequency 5 16 P0705=15 Fixed Frequency 6 17 P0706=15 Fixed Frequency Digital Outputs Terminals Parameter Default Operation 1 18,19,20 P0731 Drive fault 2 23,24,25 P0732 Drive running Analog Inputs * Terminals Parameter Default Operation 1 3,4 P0756(0) 0-10V dc 2 10,11 P0756(1) 0-10V dc Analog Outputs Terminals Parameter Default Operation 1 12,13 P0771(0) Frequency 2 26,27 P0771(1) Frequency