This document is a user manual for an HD vehicle recorder. It provides instructions on installing the recorder, basic operation, and settings. Key features of the recorder include 1080p HD video recording, an 8 megapixel CMOS sensor, anti-shake function, G-sensor impact recording, GPS tracking, HDMI and AV outputs, and supports up to 32GB SD cards. The manual provides step-by-step explanations of general settings, recording modes, anti-shake settings, and video playback, deletion and formatting.
2. 1
Preface
Dear users:
Thank you for purchasing this high-level vehicle recorder. This product
provides high video recording quality accompanied by HDMI output. It is
your best partner when you drive a car. Before you start to use it, read this
user manual carefully and follow the instructions to use it.
Please drive safely.
Safety tips
1. The temperature in the car is high in the summer. We suggest you to
remove the recorder before leaving the car. It prevents the damage to
the product caused by sunshine and high temperature.
2. The driver should not operate the recorder when driving the car for
safety.
3. Do not use any chemical solution to wipe the optical lens and clean
the recorder.
4. If there is any abnormality occurs when using the product, please
remove the power supply and stop using it immediately. Please do
not disassemble it by yourself to protect your rights and interests.
5. Please use original accessories. Do not disassemble or refit the
recorder by yourself for safety concerns.
3. 2
Table of contents
Preface-----------------------------------------------------------------1
Safety tips-------------------------------------------------------------1
Features----------------------------------------------------------------3
Specifications---------------------------------------------------------4
Product configuration------------------------------------------------6
Installation-------------------------------------------------------------8
Operation Instructions-----------------------------------------------9
General Settings Instruction----------------------------------------9
1. General settings steps---------------------------------------------9
2. Recording mode settings-----------------------------------------11
3. Anti-shake setting-------------------------------------------------12
4. G-sensor setting---------------------------------------------------13
5. GPS setting--------------------------------------------------------13
6. Video output mode-----------------------------------------------13
7. Video replay/delete/format -------------------------------------14
Accessories-----------------------------------------------------------15
Remark----------------------------------------------------------------15
4. 3
Features
Unique and elegant appearance
2.7 inch TFT LCD 16:9
FULL HD 1920*1080P high definition quality
8 mega pixels CMOS,still image 12 mega pixels:
4032*3024
Original imported 6G fixed lens, 158 degree wide view
angle, make the video and image more clearly
HWDR-High Wide Dynamic Range (make the video clear
with insufficient light or hard light)
Anti-shake function
Day and night mode switch
Off screen save power function
Button backlight design
Good heat dissipation
Motion detection
Recording while charging
Cycled recording
5. 4
SOS lock function
MIC mute function
G-sensor (enforce to save the video when gravity up to
4G)
GPS track with car speed,watermark Logo
HDMI and AV-OUT output
Built-in mic, speaker and polymer li-ion battery
Video automatically when car engine turn on or delay
start function
Support max 32GB SDHC memory card
Specifications
Resolution
FHD:1920X1080@30fps
HD:1280X720@60fps
VGA:640X480@30fps
Sensor AIR0331 CMOS Sensor
Lens
6G fixed lens,aperture1.6,
158 degree wide view angle
LCD screen 2.7 inch TFT 16:9
6. 5
Video format MOV, H.264 codec
Image resolution
4032X3024,
Image quality:3M、5M、8M、12M
Storage device
Micro SD card
Support 2GB-32GB
Audio Built-in mic and speaker
Port USB2.0/HDMI/AV-out
Battery 3.7V 500mAH polymer li-ion battery
Language
Chinese/English/French/Italian/Spanish/
/Portuguese/Russian/Germany/Japanese
Operation
temperature
-20-60°C
Operation
humidity
15-65%RH
Size 122.2(L)X45.2(W)X37.6(H)mm
Weight 80g
8. 7
10: Bracket socket
11: MIC 12: RESET
13: Lens 14: HDMI port
15: Micro SD card slot 16: GPS port
17: USB port 18: AV-out port
9. 8
Installation
The bracket should be fixed on the inner wall of the windshield.
After setting the bracket in proper position, please press down the
sucker fastener to prevent it from falling down.
Please make sure that the recorder and bracket are fixed firmly.
Adjust the rotating arm and the recorder until a proper viewing
angle is reached. Twist the adjusting knobs on the arm and
recorder tight.
10. 9
Operation Instructions
1. Inset the Micro SD card
2. Please connect the USB terminal of power cable to the USB
port of the recorder, and put the plug into the socket of car
cigarette lighter. The recorder is set to be automatically
started when you start the engine.
3. When you use the recorder for the first time, please enter
the setting mode to customize the setting.
Steps: push 【REC】 to stop video recording→push
【MENU】once to enter the screen of video recording
settings . →Push【MENU】twice to enter the screen
of general settings .
General Settings Instructions
1. General setting steps:
A. Language
The original setting is English. When you enter the screen
of language setting, use the buttons 【MIC】or【REC】to
select your preferred language and then push 【▲】to save
11. 10
the setting and return to screen of general settings.
B. Date/Time
Move the highlight to Date/Time. Then push 【▲】to enter
the setting screen. Use 【MIC】or【REC】to set the right
number and then push 【▲】jumping to the next setting.
When all of the settings are finished, push 【Menu】to
return the screen of general settings.
C. Microphone
The original setting of microphone is ON. If you want to set
it to silent mode, please push 【MIC】to change the setting
to OFF. At this time, when you push 【Menu】 to go to the
recording screen, an icon, which stands for the silent mode,
shows on the left side of the display panel .
D. Default setting
During usage, if you want to set the recorder to its original
settings, please push 【Menu】to enter the screen of default
settings, then use 【▲】to reset it.
E. 4X digital zoom
The recorder support 4X digital zoom when you take photo.
Use 【MIC】or【REC】to adjust.
12. 11
2. Recording Mode Settings
A. Resolution
The original setting is FHD 1920x1080P@30fps, this mode
is recommended for the best recording quality. It lso can
support HD720P@60fps. Move the highlight to resolution.
Then push 【▲】to enter the setting screen, use 【MIC】
or【REC】 to select the resolution, push 【▲】to save the
setting and return to screen of video recording settings.
B. Loop recording
The original setting is 3 Minutes. Loop recording means
that every 3 Minutes. The recorder makes a new video file
stored on the memory card and keeps recording. When the
memory space runs out, the recorder will overwrite the
older files for the storage of the coming new video files
accordingly. If you set the loop recording mode to OFF,
when the memory space runs out, the recording mode will
be stopped.
C. Sound recording OFF
When the recorder is recording, push【MIC】shortly to turn
13. 12
recording off . Push 【MIC】 again to turn it on.
D. Night Time Recording
When you drive in the environment with insufficient light,
please turn on HDR.
Move the highlight to HDR, press 【▲】→ use 【MIC】
or【REC】to select ON, it can ensure the video clearly. If you want
cancel it, please select OFF.
E. Manual file protection
When the recorder is recording, push【▲】to open file
protection. At the time, an icon EMG will flash on the
display, which means that the file has been protected from
being overwritten by loop recording. When next file
recording, the EMG will be disappear and file will be
normal.
The protected video files will be saved to the folder
XXXCRASH and set to be read only.
3. Anti-shake function
The original setting is ON. It means picture will not jump if
14. 13
hands shake when you take photo. Move the highlight to
Anti-shaking, press【▲】→ use【MIC】or【REC】to select,
push 【▲】to save the setting and return to screen of still
image settings.
4.G-sensor function
The original setting is ON. When the gravity up to 4G if car
accident or any other emergency, the video clip will be
enforced to save and it will not be cycled.
5.GPS function
The recorder support GPS function, it can record car track
with car speed. The original setting is ON.
6.Video output
A. Micro SD card
Insert the Micro SD card to the card reader to read the file.
The file format is MOV.
B. AV OUT
Use the AV cable to connect the AV-OUT port with a TV. It
should be noted that the yellow and white terminals must match.
The video input setting of the TV must be switched. After the
connection, other operations are not necessary to output the video
15. 14
files to the TV.
C. HDMI OUT
Connect the HDMI Out port with a TV to output the video.
The operation steps are the same as (B). The video input setting
of the TV must be switched to HDMI.
HDMI is only for video replay.
7.Video Replay Instructions
A. Play video
Please push 【REC】first to stop video recording → push
【MODE】to enter video replay mode → push【MIC】or【REC】
to select the file you want to play → push【▲】to play the video
or pause playing.
B.Delete video
Use 【MIC】or 【REC】 to select the file you want to play.
Push 【MENU】jumping out the screen of video replay and then
select DELETE → push 【▲】 select DELETE CURRENT →
push 【▲】 again to delete a single file.
The function cannot delete the protected files.
16. 15
Before deleting the files, you must stop playing the video at
first.
C.Format all
The format function can deletes all the data in
the memory card (including the protected files). Please use it
carefully.
Move the highlight to FORMAT. Push 【▲】jumping out the
memory card→ push 【▲】→Use 【MIC】or【REC】 to select
→push 【▲】 to finish the formatting of the memory card.
Standard accessories
4M car charger, Suction cup bracket, 3M stick holder,
HDMI cable ,USB cable,User Manual, Card reader
Optional parts
AV-OUT cable,Household power adapter,Micro SD card
Remark: If this product crashed due to improper operation,
please press reset, and then turn on again, product will resume
normal work.