SlideShare uma empresa Scribd logo
1 de 8
Baixar para ler offline
TEMPORARY

SCHOOL OF ARCHITECTURE, BUILDING & DESIGN
Research Unit for Modern Architecture Studies in Southeast Asia
Foundation of Natural and Built Environment (FNBE)
Design Visualization [FNBE 0155]
Credit hours: 5
Prerequisite: None
Lectu re rs : Ms D ell iya Z a i n & Mis s No rm a Su lai m a n

Abstract
Students will undergo series of lectures, tutorial and study trips that engage in the issues of communicating ideas
visually. Students will become familiar with the use of standard abbreviations, symbols and drawing conventions.
A sense of appreciation in terms of recording the design process will be inculcated within the students as variety
of recording techniques; graphic annotations; investigative observation; and personal expression are taught.
The subject can be divided into four sections as follows:
- Drawing Process Skills
- Students will apply the fundamental principles, elements and techniques in sketching, drawing, design
process and presentation skills.
- Creativity
- Students will manipulate a variety of media and techniques to visualize ideas leading to a finish product.
Sketchbooks, notebooks and relevant supporting material should form part of this evidence.
- Development of Work
- Students will illustrate series of annotated sketches and relevant supporting material in a diagrammatic
manner to support their own evolution of thoughts and processes leading to a finished piece
- Presentation Skills
- Students will compile work in a logical manner by applying drawing as a means of communication in
order to convey ideas clearly.

Objectives
The objectives of delivering this topic are to encourage the student:
 To identify a personal and expressive response to visual simulation.
 To apply basic principles and elements of design and drawing as a language to visualise and to communicate
ideas.
 To demonstrate observation and visualisation skills in a variety of ways depending on the area of
specialisation being pursued with an emphasis on the process of drawing.
 To develop confidence to use drawing as a means of communication to express two dimensional and three
dimensional ideas.
 To interpret and apply the importance of visual hierarchy and how to carry visual hierarchy across through
presentation.

FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 1
TEMPORARY
Learning Outcomes
Upon successful completion of the subject, students will be able to:
1. Recognize their potential for creativity, self-expression and visual awareness.
2. Identify the fundamental principles, elements and techniques in sketching, drawing, design process and
presentation skills.
3. Demonstrate observation skills and be able to record, organize, interpret and describe a variety of issues via
visual communications effectively.
4. Manipulate variety of media and techniques to visualize ideas leading to a finish product
5. Apply drawing as a means of communication in order to express two dimensional and three dimensional
ideas.
6. Illustrate series of annotated sketches and relevant supporting material in a diagrammatic manner to support
their own evolution of thoughts and processes leading to a finished product.

Modes of Delivery
This is a 5 credit hours subject to be held over 18 weeks. There will be 5 hours for lecture and tutorial in total per
week accompanied with site visits in between.
Students will partake in lectures, tutorials, exercises and site visits which provide an introduction to the design
process and components such as sketching, drawing conventions, observation, investigation and production of
presentation. Each assignment will assist students to form a comprehensive understanding of the basic
principles, elements and design process at an appropriate level. Students will apply skills and basic knowledge to
a range of assignments delivering visual verbal reports, production of presentation, observation, and gathering
information. Together with individual works, students will be also executing exercises in groups. Sketch Journal
and Portfolio are used to assess students’ progress and reflections of the acquisition of Learning Outcomes.

Contact Hours
Lecture:
Tutorial:
Self Study:

2 hours/week
3 hours/week
3 hour/week

Late Submission Penalty
The School imposes a late submission penalty for work submitted late without a valid reason e.g. a medical
certificate. Any work submitted after the deadline (which may have been extended) shall have the percentage
grade assigned to the work on face value reduced by 10% for the first day and 5% for each subsequent day late.
A weekend counts as 1 day.
Individual members of staff shall be permitted to grant extensions for assessed work that they have set if they are
satisfied that a student has given good reasons.
The Board of Examiners may overrule any penalty imposed and allow the actual mark achieved to be used if the
late submission was for a good reason.
Absenteeism at intermediate or final presentations will result in zero mark for that presentation.

Attendance and Participation
Attendance is compulsory. Any student who arrives late after the first half-hour of class will be considered as
absent. A minimum of 80% attendance is required to pass this subject and/or be eligible for the final examination.
You are expected to attend and participate actively in class. The lectures and tutorials will assist you in
expanding your ideas and your research progression.

FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 2
TEMPORARY
Your work will be graded based on your performance throughout the semester. Your class participation is as
important as the end product.
It is compulsory for the student to attempt and submit all assessment components including portfolio. Failing to
do so will result in failing the subject irrespective of the marks earned.
It is also compulsory for the student to attend the final examination. Being absent from the final exam will result in
failing the subject even though the student has achieved more than 50% in the overall assessment.

Plagiarism (TU Student Handbook 2011)
Plagiarism, which is an attempt to present another person’s work as your own by not acknowledging the source,
is a serious case of misconduct which is deemed unacceptable by the University. "Work" includes written
materials such as books, journals and magazine articles or other papers and also includes films and computer
programs. The two most common types of plagiarism are from published materials and other students’ works
a. Published Materials
In general, whenever anything from someone else’s work is used, whether it is an idea, an opinion or the results
of a study or review, a standard system of referencing should be used. Examples of plagiarism may include a
sentence or two, or a table or a diagram from a book or an article used without acknowledgement.
Serious cases of plagiarism can be seen in cases where the entire paper presented by the student is copied from
another book, with an addition of only a sentence or two by the student. While the former can be treated as a
simple failure to cite references, the latter is likely to be viewed as cheating in an examination. Though most
assignments require the need for reference to other peoples’ works, in order to avoid plagiarism, students should
keep a detailed record of the sources of ideas and findings and ensure that these sources are clearly quoted in
their assignment. Note that plagiarism refers to materials obtained from the Internet too.
b. Other Students’ Work
Circulating relevant articles and discussing ideas before writing an assignment is a common practice. However,
with the exception of group assignments, students should write their own papers. Plagiarising the work of other
students into assignments includes using identical or very similar sentences, paragraphs or sections. When two
students submit papers which are very similar in tone and content, both are likely to be penalised.

Student Centered Learning Approach
This subject uses the Student-centered Learning (SCL) approach. Utilization of this method embodies most of
the principles known to improve learning and to encourage student’s participation. SCL requires students to be
active, RESPONSIBLE participants in their own learning and the teachers are to facilitate the students learning
process. Various teaching and learning strategies such as experiential learning, problem-based learning, site
visits, group discussions, presentations, working in group and etc. will be employed to facilitate the learning
process for this module.
In SCL students are to be:
 active in their own learning
 self-directed to be responsible to enhance their learning abilities
 able to cultivate skills that are useful in today’s workplace
 active knowledge seekers
 active players in a teamwork

TIMES / FACEBOOK GROUP PAGE
Moodle/Times and Facebook Group Page will be used as a communication tool and information portal for
students to access subject materials, project briefs, assignments and announcements.

FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 3
TEMPORARY
Contact
Lead Lecturer
Lecturer

: Ms Delliya Zain
: Miss Norma Sulaiman

Delliya.MohdZain@taylors.edu.my/ delliya.zain@gmail.com
Normah.Sulaiman@taylors.edu.my

Office Hours
Students are encouraged to visit the instructor/lecturer/tutor concerned for assistance during office hours. If the
office hours do not meet the student's schedule, it is suggested that the student notify the instructor, and set
appointment times as needed.

Types of Assessment and Feedback
Each student will be graded in the form of formative and summative assessments. Formative assessments will
provide information to guide the student in the research process. This form of assessment will be conducted
through Interim Critique/Review sessions. Summative assessment will inform the student about the level of
understanding and performance capabilities achieved at the end of each project with form of a final examination.
*Each student MUST submit and “pass” their E-Portfolio to PASS this module.

Assessment Plan
Assessments

Type

Learning
outcomes

Marks

The DESIGN Journal
Project One

Individual
Individual
Individual
30% &
Group 10%
Individual

1,2,3,4
2,3
3,4,5,6

20%
30%

NA
W4

W18
W4 & W10

40%

W13 & W18

W13 & W18

1,2,

10%
100%

NA

Final Project
E-Portfolio
Total

Presentation

Submission

W18

Coursework
This module will be graded in the form of course work and portfolio. It consists of 2 projects, 1 journal and a
portfolio.
The DESIGN Journal
The aim of The Journal is as a medium for students to express, record ideas and process. Students will also be
given task and exercises to be placed in the sketch journal as an ongoing learning process. Sketches, different
types of sketching, rendering technique, rendering media, architectural lettering, scale exercise, line weight
exercise, elements and principles of design exercises and recording of observations are examples of items
that will be placed in The DESIGN Journal.
Project
Project 1A is to give an introduction to architectural sketching and observation. 1B aims to guide the students to
prepare architectural drawings and to apply drawing conventions to the drawings. Students will be given a site in
to be measured, observed and present it as proper architecture drawings. It will also aim to guide the students to
illustrate Bubble Diagrams and Diagrammatic Analysis through observation and drawings of the same site given.
Final Project
The aim of the Project 2 will be a review that demonstrates the entire topic learned in this course subject.
Students will be introduced to site investigation and case study and undergo an introduction to the “design
process” to help them visualize their idea and they will present it in a systematic manner with visuals, drawings,
sketches, diagrams, models etc. Students will be given a particular task to propose a design for a particular
object or structure. The first part of the Final Project will concentrate on the development of ideas through
sketches, diagrams and working models. Once presented the students will continue to produce sketches and
FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 4
TEMPORARY
drawings and prepare the “presentation documents”. The students are required to give a 5 minute verbal
presentation of their work.
E-Portfolio
Students will produce a hard copy portfolio and an online TGC portfolio to showcase their work and their learning
reflections throughout the semesters. Lectures and tips on preparing a portfolio will help the students to produce
this portfolio. Students will need to apply their basic graphic and visual knowledge learned throughout the
semester to enhance their portfolio.

Student Input
Student participation is encouraged through various means. In this module, students have the opportunity to
participate in the following ways:





Students’ ideas and questions are welcomed, valued and encouraged.
Student input is sought to understand their perspectives, ideas and needs in planning subject revision.
Students are offered opportunities to give feedback with the assurance that issues will be addressed in
response to that feedback.
Student evaluation allows their views and experiences about the sessions are actively sought and used as
an integral part of improvement in teaching and continuous improvement.

FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 5
TEMPORARY

Marks and Grading Table
Assessments and grades will be returned within 2 weeks of your submission. You will be given the grades and
necessary feedback for each submission. The grading system is shown below.
Grade

Marks

Grade
Points

A

80 – 100

4.00

Definition

Description

Excellent

Evidence of original thinking; demonstrated outstanding
capacity to analyze and synthesize; outstanding grasp of
module matter; evidence of extensive knowledge base

Very Good

Evidence of good grasp of module matter; critical capacity
and analytical ability; understanding of relevant issues;
evidence of familiarity with the literature

Good

Evidence of grasp of module module; critical capacity and
analytical ability, reasonable understanding of relevant
issues; evidence of familiarity with the literature

Pass

Evidence of some understanding of the module matter;
ability to develop solutions to simple problems; benefitting
from his/her university experience

Marginal
Pass

Evidence of minimally acceptable familiarity with module
matter, critical and analytical skills

A-

75 – 79

3.67

B+

70 – 74

3.33

B

65 – 69

3.00

B-

60 – 64

2.67

C+

55 – 59

2.33

C

50 – 54

2.00

D+

47 – 49

1.67

D

44 – 46

1.33

D-

40 – 43

1.00

F

0 – 39

0.00

Fail

Insufficient evidence of understanding of the module matter;
weakness in critical and analytical skills; limited or irrelevant
use of the literature

WD

-

-

Withdrawn

Withdrawn from a module before census date, typically mid
semester

F(W)

0

0.00

Fail

IN

-

-

Incomplete

P

-

-

Pass

Given for satisfactory completion of practicum

AU

-

-

Audit

Given for a module where attendance is for information only
without earning academic credit

Withdrawn after census date, typically mid semester
An interim notation given for a module where a student has
not completed certain requirements with valid reason or it is
not possible to finalise the grade by the published deadline

Note: A student who fails a module with a final grade of D+, D or D- will be allowed to re-sit the examination (or
resubmit an assessment) for the failed module, to be determined by the Board of Examiners, before the
commencement of the next semester. The maximum passing grade awarded for the re-sit examination will be a
grade C (RS), irrespective of the actual mark of the re-sit examination/assessment.
(TDS_Handbook 2011, pg 46)

FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 6
TEMPORARY
Assessment Criteria
This unit is assessed by coursework in the form of design projects. The general assessment criteria are as
follows:







The quality and content of assignments submitted.
The clarity in communication of information in the presentation slides or boards.
Clearly and logically organised of the report structures.
Creativity in presenting the works.
Conclusion based on the student’s evaluation of the site visits.
Proper referencing quoted.

All assignments must be completed and submitted to receive a final completion grade in this unit. In the case
where assignment is NOT completed or NOT submitted, a final grade of FX (Did Not Submit) will be issued for
the assignment and subsequently an X (Incomplete) will be issued for the course.

References
1.
2.
3.
4.
5.

Ching, Francis D.K. 2002. Architectural Graphics. John Wiley & Sons, Inc, New York, 4th ed.
Ching, Francis D.K. 2002. Architecture: Form, Space and Order. Van Nostrand Reinhold.
Ching, Francis D.K. 2000. Drawing: A Creative Process. John Wiley & Sons, Inc, New York.
Clark, Roger H. 2004. Precedent in Architecture: Analytical Diagrams, Formative Ideas, and Partis. 3rd ed.,
John Wiley & Sons, Inc, New York.
Lawson, Bryan.1994. Design in Mind. Butterworth, Oxford.

FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 7
TEMPORARY
Module Schedule (DV) – September 2012
Week/
Date
W1

Lecture / Topic/ Event
(Monday)
L1.Introduction

Tutorials/Activities
(Friday)
Briefing – Project 1A

The Design Journal
Submission & Brief

W2

L2. Sketching Part 1

[Tutorial] Project ONE A

[IDJ 01 Brief]

W3

L3. Sketching Part 1

[Tutorial] Project ONE A

W4

L4. Principles & Elements of
Design

Briefing – Project 1B
[Tutorial] Scale + Arch Handwriting
[Tutorial] Project ONE A

W5

L5.Drawing Convention
PIN UP SUBMISSION 1A
23/10/2013
[Tutorial] Project ONE B

W6
W7
W8
W9
W10
W11
W12
W13

((MEASURING SITE))

[IDJ 02 Brief]
IDJ 01 Submission
25/10

[Tutorial] DRAWING

SEMESTER BREAK / ACTIVITY WEEK 2nd-10th Nov 2013
L6.Diagrams
[Tutorial] Project ONE B
[IDJ 03 Brief]
IDJ 02 Submission
22/11
L7. Design Process & Design
[Tutorial] Project ONE B
Concept and Approach
L8. Intro to Site Analysis Part 1
SUBMISSION 1B 29/11/2013
EPORTFOLIO
Briefing – FINAL PROJECT
SUBMISSION
L9. Presentation Part 1

[Tutorial] Final Project Part A (group)
[Tutorial] Final Project Part B
11/12/2013 HOLIDAY
[Tutorial] Final Project Part A (group)
SULTAN OF SELANGOR BDAY [Tutorial] Final Project Part B
L10. Portfolio + Model Making
PRESENTATION FP - PART A
20/12/2013
CHRISTMAS & NEW YEAR 21st-29th DEC 2013
01/01/2014 HOLIDAY
[Tutorial] Final Project Part B
NEW YEAR

W14

L12. Presentation Part 2

PRESENTATION FP – PART B
10/01/2014
17/01/2014 HOLIDAY
THAIPUSAM
[Tutorial] Final Project Part C

W15

[Tutorial] Final Project Part C

W16

L13. Visual Montage

W17

Presentation Preparation

IDJ 03 Submission
14/12

[IDJ 05 Brief]
IDJ 04 Submission
3/1

CHINNESE NEW YEAR 25th JAN 2014 - 2nd FEB 2014
L14. Final Lecture
[Tutorial] Final Project Part C

W18

[IDJ 04 Brief]

PRESENTATION SUBMISSION FP –
PART C - 14/02/2014

Note: This subject outline is module to change with short notice

FNBE - Design Visualization [DMZ.SEPT.2013]

TEMP 8

IDJ 05 Submission
24/1

IDJ FINAL
SUBMISSION **
FINAL EPORTFOLIO
SUBMISSION**

Mais conteúdo relacionado

Destaque

M outline (general)
M outline (general)M outline (general)
M outline (general)Anthony Chew
 
Final projectcomplete
Final projectcompleteFinal projectcomplete
Final projectcompleteAnthony Chew
 
Enbe final project
Enbe final projectEnbe final project
Enbe final projectAnthony Chew
 
Building con 1 (arc 1523) project 2 brief aug 2014 (1)
Building con 1 (arc 1523) project 2 brief aug 2014 (1)Building con 1 (arc 1523) project 2 brief aug 2014 (1)
Building con 1 (arc 1523) project 2 brief aug 2014 (1)Anthony Chew
 
Esd project mcmc august 2014 (1)
Esd project mcmc august 2014 (1)Esd project mcmc august 2014 (1)
Esd project mcmc august 2014 (1)Anthony Chew
 
Project one site visit instructions
Project one   site visit instructionsProject one   site visit instructions
Project one site visit instructionsAnthony Chew
 
Abstract ( asian architecture )
Abstract ( asian architecture )Abstract ( asian architecture )
Abstract ( asian architecture )Anthony Chew
 
B. structure project 1 brief august 2015
B. structure project 1 brief august 2015B. structure project 1 brief august 2015
B. structure project 1 brief august 2015Anthony Chew
 
Project brief buidling science 1 032015
Project  brief buidling science 1 032015Project  brief buidling science 1 032015
Project brief buidling science 1 032015Anthony Chew
 
Arc1215 arc60305 course outline jan 2015
Arc1215 arc60305 course outline jan 2015Arc1215 arc60305 course outline jan 2015
Arc1215 arc60305 course outline jan 2015Anthony Chew
 

Destaque (20)

M outline (general)
M outline (general)M outline (general)
M outline (general)
 
Project2 brief
Project2 briefProject2 brief
Project2 brief
 
Idj 01
Idj 01Idj 01
Idj 01
 
Oic
OicOic
Oic
 
Final projectcomplete
Final projectcompleteFinal projectcomplete
Final projectcomplete
 
Enbe final project
Enbe final projectEnbe final project
Enbe final project
 
Building con 1 (arc 1523) project 2 brief aug 2014 (1)
Building con 1 (arc 1523) project 2 brief aug 2014 (1)Building con 1 (arc 1523) project 2 brief aug 2014 (1)
Building con 1 (arc 1523) project 2 brief aug 2014 (1)
 
Tj 01
Tj 01Tj 01
Tj 01
 
Sketches
SketchesSketches
Sketches
 
Synopsis 2
Synopsis 2Synopsis 2
Synopsis 2
 
Esd project mcmc august 2014 (1)
Esd project mcmc august 2014 (1)Esd project mcmc august 2014 (1)
Esd project mcmc august 2014 (1)
 
Tau march 2016
Tau march 2016Tau march 2016
Tau march 2016
 
Project one site visit instructions
Project one   site visit instructionsProject one   site visit instructions
Project one site visit instructions
 
Enbe cover (back)
Enbe cover (back)Enbe cover (back)
Enbe cover (back)
 
Abstract ( asian architecture )
Abstract ( asian architecture )Abstract ( asian architecture )
Abstract ( asian architecture )
 
Final project
Final projectFinal project
Final project
 
B. structure project 1 brief august 2015
B. structure project 1 brief august 2015B. structure project 1 brief august 2015
B. structure project 1 brief august 2015
 
Project 1 cube
Project 1   cubeProject 1   cube
Project 1 cube
 
Project brief buidling science 1 032015
Project  brief buidling science 1 032015Project  brief buidling science 1 032015
Project brief buidling science 1 032015
 
Arc1215 arc60305 course outline jan 2015
Arc1215 arc60305 course outline jan 2015Arc1215 arc60305 course outline jan 2015
Arc1215 arc60305 course outline jan 2015
 

Semelhante a Course outline (fnbe 0155) dv - temporary

ITD module outline
ITD module outlineITD module outline
ITD module outlinemasonsth
 
ITD Module Outline
ITD Module OutlineITD Module Outline
ITD Module OutlineKai Yun Pang
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014kychong1105
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014danielsong15
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Js Cheok
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Ang Averllen
 
Drawing module outline august 2014
Drawing module outline august 2014Drawing module outline august 2014
Drawing module outline august 2014cynfang Fong
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014dhirazain
 
ITDOUTLINE
ITDOUTLINEITDOUTLINE
ITDOUTLINEqayyum23
 
Drawing_Module Outline_August(F) 2014.pdf
Drawing_Module Outline_August(F) 2014.pdfDrawing_Module Outline_August(F) 2014.pdf
Drawing_Module Outline_August(F) 2014.pdfdhirazain
 
FNBE0115 ITD Module outline
FNBE0115 ITD Module outline FNBE0115 ITD Module outline
FNBE0115 ITD Module outline SongKit96
 
FNBE0115 - ITD PROJECT 2 BRIEF
FNBE0115 - ITD PROJECT 2 BRIEFFNBE0115 - ITD PROJECT 2 BRIEF
FNBE0115 - ITD PROJECT 2 BRIEFbarbaraxchang
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Lee Fong Yen
 
Module outline itd
Module outline itdModule outline itd
Module outline itdGynie
 
FNBE 0115 - ITD MODULE OUTLINE
FNBE 0115 - ITD MODULE OUTLINEFNBE 0115 - ITD MODULE OUTLINE
FNBE 0115 - ITD MODULE OUTLINEbarbaraxchang
 
Drawing module outline
Drawing module outlineDrawing module outline
Drawing module outlineAlexis Wei
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014chloeesim
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Dameerster
 

Semelhante a Course outline (fnbe 0155) dv - temporary (20)

ITD module outline
ITD module outlineITD module outline
ITD module outline
 
ITD Module Outline
ITD Module OutlineITD Module Outline
ITD Module Outline
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 
Itd module outline
Itd module outlineItd module outline
Itd module outline
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 
Drawing module outline august 2014
Drawing module outline august 2014Drawing module outline august 2014
Drawing module outline august 2014
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 
ITDOUTLINE
ITDOUTLINEITDOUTLINE
ITDOUTLINE
 
Drawing_Module Outline_August(F) 2014.pdf
Drawing_Module Outline_August(F) 2014.pdfDrawing_Module Outline_August(F) 2014.pdf
Drawing_Module Outline_August(F) 2014.pdf
 
FNBE0115 ITD Module outline
FNBE0115 ITD Module outline FNBE0115 ITD Module outline
FNBE0115 ITD Module outline
 
FNBE0115 - ITD PROJECT 2 BRIEF
FNBE0115 - ITD PROJECT 2 BRIEFFNBE0115 - ITD PROJECT 2 BRIEF
FNBE0115 - ITD PROJECT 2 BRIEF
 
Module outline itd
Module outline itdModule outline itd
Module outline itd
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 
Module outline itd
Module outline itdModule outline itd
Module outline itd
 
FNBE 0115 - ITD MODULE OUTLINE
FNBE 0115 - ITD MODULE OUTLINEFNBE 0115 - ITD MODULE OUTLINE
FNBE 0115 - ITD MODULE OUTLINE
 
Drawing module outline
Drawing module outlineDrawing module outline
Drawing module outline
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 
Drawing module outline august(f) 2014
Drawing module outline august(f) 2014Drawing module outline august(f) 2014
Drawing module outline august(f) 2014
 

Mais de Anthony Chew

Project 1-performance-evaluation-2
Project 1-performance-evaluation-2Project 1-performance-evaluation-2
Project 1-performance-evaluation-2Anthony Chew
 
Bscience report ff
Bscience report ffBscience report ff
Bscience report ffAnthony Chew
 
Project 2 integration (1)
Project 2  integration (1)Project 2  integration (1)
Project 2 integration (1)Anthony Chew
 
B sc (hons)(arch) tau arc61301 project mac 2016 (2)
B sc (hons)(arch)  tau arc61301 project mac 2016 (2)B sc (hons)(arch)  tau arc61301 project mac 2016 (2)
B sc (hons)(arch) tau arc61301 project mac 2016 (2)Anthony Chew
 
B sc (hons)(arch) tau arc61301 synopsis mac 2016
B sc (hons)(arch)  tau arc61301 synopsis mac 2016B sc (hons)(arch)  tau arc61301 synopsis mac 2016
B sc (hons)(arch) tau arc61301 synopsis mac 2016Anthony Chew
 
Sunshading device studies 1 05-02-16
Sunshading device studies 1   05-02-16Sunshading device studies 1   05-02-16
Sunshading device studies 1 05-02-16Anthony Chew
 
Building structure (1) (1)
Building structure (1) (1)Building structure (1) (1)
Building structure (1) (1)Anthony Chew
 
B. structure project 2 brief august 2015 (1)
B. structure project 2 brief august 2015 (1)B. structure project 2 brief august 2015 (1)
B. structure project 2 brief august 2015 (1)Anthony Chew
 
Building structure report xoxoxo
Building structure report xoxoxoBuilding structure report xoxoxo
Building structure report xoxoxoAnthony Chew
 
Asian architecture
Asian architectureAsian architecture
Asian architectureAnthony Chew
 
Topic issue proposal 2014
Topic  issue proposal 2014Topic  issue proposal 2014
Topic issue proposal 2014Anthony Chew
 
B sc (hons)(arch) asian architecture arc60403 project aug 2015 (4)
B sc (hons)(arch)  asian architecture arc60403 project aug 2015 (4)B sc (hons)(arch)  asian architecture arc60403 project aug 2015 (4)
B sc (hons)(arch) asian architecture arc60403 project aug 2015 (4)Anthony Chew
 
B sc (hons)(arch) asian architecture arc60403 outline aug 2015 (2)
B sc (hons)(arch)  asian architecture arc60403 outline aug 2015 (2)B sc (hons)(arch)  asian architecture arc60403 outline aug 2015 (2)
B sc (hons)(arch) asian architecture arc60403 outline aug 2015 (2)Anthony Chew
 
Module intro aug 2015
Module intro aug 2015Module intro aug 2015
Module intro aug 2015Anthony Chew
 
Service ready to print (1)
Service ready to print  (1)Service ready to print  (1)
Service ready to print (1)Anthony Chew
 

Mais de Anthony Chew (20)

Project 1-performance-evaluation-2
Project 1-performance-evaluation-2Project 1-performance-evaluation-2
Project 1-performance-evaluation-2
 
Bscience report ff
Bscience report ffBscience report ff
Bscience report ff
 
Project 2 integration (1)
Project 2  integration (1)Project 2  integration (1)
Project 2 integration (1)
 
Theories report
Theories reportTheories report
Theories report
 
Synopsis 4
Synopsis 4Synopsis 4
Synopsis 4
 
Sypnosis 3
Sypnosis 3Sypnosis 3
Sypnosis 3
 
Synopsis 1
Synopsis 1Synopsis 1
Synopsis 1
 
B sc (hons)(arch) tau arc61301 project mac 2016 (2)
B sc (hons)(arch)  tau arc61301 project mac 2016 (2)B sc (hons)(arch)  tau arc61301 project mac 2016 (2)
B sc (hons)(arch) tau arc61301 project mac 2016 (2)
 
B sc (hons)(arch) tau arc61301 synopsis mac 2016
B sc (hons)(arch)  tau arc61301 synopsis mac 2016B sc (hons)(arch)  tau arc61301 synopsis mac 2016
B sc (hons)(arch) tau arc61301 synopsis mac 2016
 
Sunshading device studies 1 05-02-16
Sunshading device studies 1   05-02-16Sunshading device studies 1   05-02-16
Sunshading device studies 1 05-02-16
 
Building structure (1) (1)
Building structure (1) (1)Building structure (1) (1)
Building structure (1) (1)
 
B. structure project 2 brief august 2015 (1)
B. structure project 2 brief august 2015 (1)B. structure project 2 brief august 2015 (1)
B. structure project 2 brief august 2015 (1)
 
Building structure report xoxoxo
Building structure report xoxoxoBuilding structure report xoxoxo
Building structure report xoxoxo
 
Asian architecture
Asian architectureAsian architecture
Asian architecture
 
Aa presentatin
Aa presentatinAa presentatin
Aa presentatin
 
Topic issue proposal 2014
Topic  issue proposal 2014Topic  issue proposal 2014
Topic issue proposal 2014
 
B sc (hons)(arch) asian architecture arc60403 project aug 2015 (4)
B sc (hons)(arch)  asian architecture arc60403 project aug 2015 (4)B sc (hons)(arch)  asian architecture arc60403 project aug 2015 (4)
B sc (hons)(arch) asian architecture arc60403 project aug 2015 (4)
 
B sc (hons)(arch) asian architecture arc60403 outline aug 2015 (2)
B sc (hons)(arch)  asian architecture arc60403 outline aug 2015 (2)B sc (hons)(arch)  asian architecture arc60403 outline aug 2015 (2)
B sc (hons)(arch) asian architecture arc60403 outline aug 2015 (2)
 
Module intro aug 2015
Module intro aug 2015Module intro aug 2015
Module intro aug 2015
 
Service ready to print (1)
Service ready to print  (1)Service ready to print  (1)
Service ready to print (1)
 

Último

Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptxClinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptxraviapr7
 
How to Create a Toggle Button in Odoo 17
How to Create a Toggle Button in Odoo 17How to Create a Toggle Button in Odoo 17
How to Create a Toggle Button in Odoo 17Celine George
 
The Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George WellsThe Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George WellsEugene Lysak
 
A gentle introduction to Artificial Intelligence
A gentle introduction to Artificial IntelligenceA gentle introduction to Artificial Intelligence
A gentle introduction to Artificial IntelligenceApostolos Syropoulos
 
How to Send Emails From Odoo 17 Using Code
How to Send Emails From Odoo 17 Using CodeHow to Send Emails From Odoo 17 Using Code
How to Send Emails From Odoo 17 Using CodeCeline George
 
EBUS5423 Data Analytics and Reporting Bl
EBUS5423 Data Analytics and Reporting BlEBUS5423 Data Analytics and Reporting Bl
EBUS5423 Data Analytics and Reporting BlDr. Bruce A. Johnson
 
Education and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptxEducation and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptxraviapr7
 
Over the counter (OTC)- Sale, rational use.pptx
Over the counter (OTC)- Sale, rational use.pptxOver the counter (OTC)- Sale, rational use.pptx
Over the counter (OTC)- Sale, rational use.pptxraviapr7
 
Work Experience for psp3 portfolio sasha
Work Experience for psp3 portfolio sashaWork Experience for psp3 portfolio sasha
Work Experience for psp3 portfolio sashasashalaycock03
 
How to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 SalesHow to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 SalesCeline George
 
3.26.24 Race, the Draft, and the Vietnam War.pptx
3.26.24 Race, the Draft, and the Vietnam War.pptx3.26.24 Race, the Draft, and the Vietnam War.pptx
3.26.24 Race, the Draft, and the Vietnam War.pptxmary850239
 
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdfP4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdfYu Kanazawa / Osaka University
 
How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17Celine George
 
CapTechU Doctoral Presentation -March 2024 slides.pptx
CapTechU Doctoral Presentation -March 2024 slides.pptxCapTechU Doctoral Presentation -March 2024 slides.pptx
CapTechU Doctoral Presentation -March 2024 slides.pptxCapitolTechU
 
10 Topics For MBA Project Report [HR].pdf
10 Topics For MBA Project Report [HR].pdf10 Topics For MBA Project Report [HR].pdf
10 Topics For MBA Project Report [HR].pdfJayanti Pande
 
ARTICULAR DISC OF TEMPOROMANDIBULAR JOINT
ARTICULAR DISC OF TEMPOROMANDIBULAR JOINTARTICULAR DISC OF TEMPOROMANDIBULAR JOINT
ARTICULAR DISC OF TEMPOROMANDIBULAR JOINTDR. SNEHA NAIR
 
HED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdfHED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdfMohonDas
 
Slides CapTechTalks Webinar March 2024 Joshua Sinai.pptx
Slides CapTechTalks Webinar March 2024 Joshua Sinai.pptxSlides CapTechTalks Webinar March 2024 Joshua Sinai.pptx
Slides CapTechTalks Webinar March 2024 Joshua Sinai.pptxCapitolTechU
 

Último (20)

Prelims of Kant get Marx 2.0: a general politics quiz
Prelims of Kant get Marx 2.0: a general politics quizPrelims of Kant get Marx 2.0: a general politics quiz
Prelims of Kant get Marx 2.0: a general politics quiz
 
Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptxClinical Pharmacy  Introduction to Clinical Pharmacy, Concept of clinical pptx
Clinical Pharmacy Introduction to Clinical Pharmacy, Concept of clinical pptx
 
How to Create a Toggle Button in Odoo 17
How to Create a Toggle Button in Odoo 17How to Create a Toggle Button in Odoo 17
How to Create a Toggle Button in Odoo 17
 
The Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George WellsThe Stolen Bacillus by Herbert George Wells
The Stolen Bacillus by Herbert George Wells
 
Personal Resilience in Project Management 2 - TV Edit 1a.pdf
Personal Resilience in Project Management 2 - TV Edit 1a.pdfPersonal Resilience in Project Management 2 - TV Edit 1a.pdf
Personal Resilience in Project Management 2 - TV Edit 1a.pdf
 
A gentle introduction to Artificial Intelligence
A gentle introduction to Artificial IntelligenceA gentle introduction to Artificial Intelligence
A gentle introduction to Artificial Intelligence
 
How to Send Emails From Odoo 17 Using Code
How to Send Emails From Odoo 17 Using CodeHow to Send Emails From Odoo 17 Using Code
How to Send Emails From Odoo 17 Using Code
 
EBUS5423 Data Analytics and Reporting Bl
EBUS5423 Data Analytics and Reporting BlEBUS5423 Data Analytics and Reporting Bl
EBUS5423 Data Analytics and Reporting Bl
 
Education and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptxEducation and training program in the hospital APR.pptx
Education and training program in the hospital APR.pptx
 
Over the counter (OTC)- Sale, rational use.pptx
Over the counter (OTC)- Sale, rational use.pptxOver the counter (OTC)- Sale, rational use.pptx
Over the counter (OTC)- Sale, rational use.pptx
 
Work Experience for psp3 portfolio sasha
Work Experience for psp3 portfolio sashaWork Experience for psp3 portfolio sasha
Work Experience for psp3 portfolio sasha
 
How to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 SalesHow to Manage Cross-Selling in Odoo 17 Sales
How to Manage Cross-Selling in Odoo 17 Sales
 
3.26.24 Race, the Draft, and the Vietnam War.pptx
3.26.24 Race, the Draft, and the Vietnam War.pptx3.26.24 Race, the Draft, and the Vietnam War.pptx
3.26.24 Race, the Draft, and the Vietnam War.pptx
 
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdfP4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
P4C x ELT = P4ELT: Its Theoretical Background (Kanazawa, 2024 March).pdf
 
How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17How to Make a Field read-only in Odoo 17
How to Make a Field read-only in Odoo 17
 
CapTechU Doctoral Presentation -March 2024 slides.pptx
CapTechU Doctoral Presentation -March 2024 slides.pptxCapTechU Doctoral Presentation -March 2024 slides.pptx
CapTechU Doctoral Presentation -March 2024 slides.pptx
 
10 Topics For MBA Project Report [HR].pdf
10 Topics For MBA Project Report [HR].pdf10 Topics For MBA Project Report [HR].pdf
10 Topics For MBA Project Report [HR].pdf
 
ARTICULAR DISC OF TEMPOROMANDIBULAR JOINT
ARTICULAR DISC OF TEMPOROMANDIBULAR JOINTARTICULAR DISC OF TEMPOROMANDIBULAR JOINT
ARTICULAR DISC OF TEMPOROMANDIBULAR JOINT
 
HED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdfHED Office Sohayok Exam Question Solution 2023.pdf
HED Office Sohayok Exam Question Solution 2023.pdf
 
Slides CapTechTalks Webinar March 2024 Joshua Sinai.pptx
Slides CapTechTalks Webinar March 2024 Joshua Sinai.pptxSlides CapTechTalks Webinar March 2024 Joshua Sinai.pptx
Slides CapTechTalks Webinar March 2024 Joshua Sinai.pptx
 

Course outline (fnbe 0155) dv - temporary

  • 1. TEMPORARY SCHOOL OF ARCHITECTURE, BUILDING & DESIGN Research Unit for Modern Architecture Studies in Southeast Asia Foundation of Natural and Built Environment (FNBE) Design Visualization [FNBE 0155] Credit hours: 5 Prerequisite: None Lectu re rs : Ms D ell iya Z a i n & Mis s No rm a Su lai m a n Abstract Students will undergo series of lectures, tutorial and study trips that engage in the issues of communicating ideas visually. Students will become familiar with the use of standard abbreviations, symbols and drawing conventions. A sense of appreciation in terms of recording the design process will be inculcated within the students as variety of recording techniques; graphic annotations; investigative observation; and personal expression are taught. The subject can be divided into four sections as follows: - Drawing Process Skills - Students will apply the fundamental principles, elements and techniques in sketching, drawing, design process and presentation skills. - Creativity - Students will manipulate a variety of media and techniques to visualize ideas leading to a finish product. Sketchbooks, notebooks and relevant supporting material should form part of this evidence. - Development of Work - Students will illustrate series of annotated sketches and relevant supporting material in a diagrammatic manner to support their own evolution of thoughts and processes leading to a finished piece - Presentation Skills - Students will compile work in a logical manner by applying drawing as a means of communication in order to convey ideas clearly. Objectives The objectives of delivering this topic are to encourage the student:  To identify a personal and expressive response to visual simulation.  To apply basic principles and elements of design and drawing as a language to visualise and to communicate ideas.  To demonstrate observation and visualisation skills in a variety of ways depending on the area of specialisation being pursued with an emphasis on the process of drawing.  To develop confidence to use drawing as a means of communication to express two dimensional and three dimensional ideas.  To interpret and apply the importance of visual hierarchy and how to carry visual hierarchy across through presentation. FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 1
  • 2. TEMPORARY Learning Outcomes Upon successful completion of the subject, students will be able to: 1. Recognize their potential for creativity, self-expression and visual awareness. 2. Identify the fundamental principles, elements and techniques in sketching, drawing, design process and presentation skills. 3. Demonstrate observation skills and be able to record, organize, interpret and describe a variety of issues via visual communications effectively. 4. Manipulate variety of media and techniques to visualize ideas leading to a finish product 5. Apply drawing as a means of communication in order to express two dimensional and three dimensional ideas. 6. Illustrate series of annotated sketches and relevant supporting material in a diagrammatic manner to support their own evolution of thoughts and processes leading to a finished product. Modes of Delivery This is a 5 credit hours subject to be held over 18 weeks. There will be 5 hours for lecture and tutorial in total per week accompanied with site visits in between. Students will partake in lectures, tutorials, exercises and site visits which provide an introduction to the design process and components such as sketching, drawing conventions, observation, investigation and production of presentation. Each assignment will assist students to form a comprehensive understanding of the basic principles, elements and design process at an appropriate level. Students will apply skills and basic knowledge to a range of assignments delivering visual verbal reports, production of presentation, observation, and gathering information. Together with individual works, students will be also executing exercises in groups. Sketch Journal and Portfolio are used to assess students’ progress and reflections of the acquisition of Learning Outcomes. Contact Hours Lecture: Tutorial: Self Study: 2 hours/week 3 hours/week 3 hour/week Late Submission Penalty The School imposes a late submission penalty for work submitted late without a valid reason e.g. a medical certificate. Any work submitted after the deadline (which may have been extended) shall have the percentage grade assigned to the work on face value reduced by 10% for the first day and 5% for each subsequent day late. A weekend counts as 1 day. Individual members of staff shall be permitted to grant extensions for assessed work that they have set if they are satisfied that a student has given good reasons. The Board of Examiners may overrule any penalty imposed and allow the actual mark achieved to be used if the late submission was for a good reason. Absenteeism at intermediate or final presentations will result in zero mark for that presentation. Attendance and Participation Attendance is compulsory. Any student who arrives late after the first half-hour of class will be considered as absent. A minimum of 80% attendance is required to pass this subject and/or be eligible for the final examination. You are expected to attend and participate actively in class. The lectures and tutorials will assist you in expanding your ideas and your research progression. FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 2
  • 3. TEMPORARY Your work will be graded based on your performance throughout the semester. Your class participation is as important as the end product. It is compulsory for the student to attempt and submit all assessment components including portfolio. Failing to do so will result in failing the subject irrespective of the marks earned. It is also compulsory for the student to attend the final examination. Being absent from the final exam will result in failing the subject even though the student has achieved more than 50% in the overall assessment. Plagiarism (TU Student Handbook 2011) Plagiarism, which is an attempt to present another person’s work as your own by not acknowledging the source, is a serious case of misconduct which is deemed unacceptable by the University. "Work" includes written materials such as books, journals and magazine articles or other papers and also includes films and computer programs. The two most common types of plagiarism are from published materials and other students’ works a. Published Materials In general, whenever anything from someone else’s work is used, whether it is an idea, an opinion or the results of a study or review, a standard system of referencing should be used. Examples of plagiarism may include a sentence or two, or a table or a diagram from a book or an article used without acknowledgement. Serious cases of plagiarism can be seen in cases where the entire paper presented by the student is copied from another book, with an addition of only a sentence or two by the student. While the former can be treated as a simple failure to cite references, the latter is likely to be viewed as cheating in an examination. Though most assignments require the need for reference to other peoples’ works, in order to avoid plagiarism, students should keep a detailed record of the sources of ideas and findings and ensure that these sources are clearly quoted in their assignment. Note that plagiarism refers to materials obtained from the Internet too. b. Other Students’ Work Circulating relevant articles and discussing ideas before writing an assignment is a common practice. However, with the exception of group assignments, students should write their own papers. Plagiarising the work of other students into assignments includes using identical or very similar sentences, paragraphs or sections. When two students submit papers which are very similar in tone and content, both are likely to be penalised. Student Centered Learning Approach This subject uses the Student-centered Learning (SCL) approach. Utilization of this method embodies most of the principles known to improve learning and to encourage student’s participation. SCL requires students to be active, RESPONSIBLE participants in their own learning and the teachers are to facilitate the students learning process. Various teaching and learning strategies such as experiential learning, problem-based learning, site visits, group discussions, presentations, working in group and etc. will be employed to facilitate the learning process for this module. In SCL students are to be:  active in their own learning  self-directed to be responsible to enhance their learning abilities  able to cultivate skills that are useful in today’s workplace  active knowledge seekers  active players in a teamwork TIMES / FACEBOOK GROUP PAGE Moodle/Times and Facebook Group Page will be used as a communication tool and information portal for students to access subject materials, project briefs, assignments and announcements. FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 3
  • 4. TEMPORARY Contact Lead Lecturer Lecturer : Ms Delliya Zain : Miss Norma Sulaiman Delliya.MohdZain@taylors.edu.my/ delliya.zain@gmail.com Normah.Sulaiman@taylors.edu.my Office Hours Students are encouraged to visit the instructor/lecturer/tutor concerned for assistance during office hours. If the office hours do not meet the student's schedule, it is suggested that the student notify the instructor, and set appointment times as needed. Types of Assessment and Feedback Each student will be graded in the form of formative and summative assessments. Formative assessments will provide information to guide the student in the research process. This form of assessment will be conducted through Interim Critique/Review sessions. Summative assessment will inform the student about the level of understanding and performance capabilities achieved at the end of each project with form of a final examination. *Each student MUST submit and “pass” their E-Portfolio to PASS this module. Assessment Plan Assessments Type Learning outcomes Marks The DESIGN Journal Project One Individual Individual Individual 30% & Group 10% Individual 1,2,3,4 2,3 3,4,5,6 20% 30% NA W4 W18 W4 & W10 40% W13 & W18 W13 & W18 1,2, 10% 100% NA Final Project E-Portfolio Total Presentation Submission W18 Coursework This module will be graded in the form of course work and portfolio. It consists of 2 projects, 1 journal and a portfolio. The DESIGN Journal The aim of The Journal is as a medium for students to express, record ideas and process. Students will also be given task and exercises to be placed in the sketch journal as an ongoing learning process. Sketches, different types of sketching, rendering technique, rendering media, architectural lettering, scale exercise, line weight exercise, elements and principles of design exercises and recording of observations are examples of items that will be placed in The DESIGN Journal. Project Project 1A is to give an introduction to architectural sketching and observation. 1B aims to guide the students to prepare architectural drawings and to apply drawing conventions to the drawings. Students will be given a site in to be measured, observed and present it as proper architecture drawings. It will also aim to guide the students to illustrate Bubble Diagrams and Diagrammatic Analysis through observation and drawings of the same site given. Final Project The aim of the Project 2 will be a review that demonstrates the entire topic learned in this course subject. Students will be introduced to site investigation and case study and undergo an introduction to the “design process” to help them visualize their idea and they will present it in a systematic manner with visuals, drawings, sketches, diagrams, models etc. Students will be given a particular task to propose a design for a particular object or structure. The first part of the Final Project will concentrate on the development of ideas through sketches, diagrams and working models. Once presented the students will continue to produce sketches and FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 4
  • 5. TEMPORARY drawings and prepare the “presentation documents”. The students are required to give a 5 minute verbal presentation of their work. E-Portfolio Students will produce a hard copy portfolio and an online TGC portfolio to showcase their work and their learning reflections throughout the semesters. Lectures and tips on preparing a portfolio will help the students to produce this portfolio. Students will need to apply their basic graphic and visual knowledge learned throughout the semester to enhance their portfolio. Student Input Student participation is encouraged through various means. In this module, students have the opportunity to participate in the following ways:     Students’ ideas and questions are welcomed, valued and encouraged. Student input is sought to understand their perspectives, ideas and needs in planning subject revision. Students are offered opportunities to give feedback with the assurance that issues will be addressed in response to that feedback. Student evaluation allows their views and experiences about the sessions are actively sought and used as an integral part of improvement in teaching and continuous improvement. FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 5
  • 6. TEMPORARY Marks and Grading Table Assessments and grades will be returned within 2 weeks of your submission. You will be given the grades and necessary feedback for each submission. The grading system is shown below. Grade Marks Grade Points A 80 – 100 4.00 Definition Description Excellent Evidence of original thinking; demonstrated outstanding capacity to analyze and synthesize; outstanding grasp of module matter; evidence of extensive knowledge base Very Good Evidence of good grasp of module matter; critical capacity and analytical ability; understanding of relevant issues; evidence of familiarity with the literature Good Evidence of grasp of module module; critical capacity and analytical ability, reasonable understanding of relevant issues; evidence of familiarity with the literature Pass Evidence of some understanding of the module matter; ability to develop solutions to simple problems; benefitting from his/her university experience Marginal Pass Evidence of minimally acceptable familiarity with module matter, critical and analytical skills A- 75 – 79 3.67 B+ 70 – 74 3.33 B 65 – 69 3.00 B- 60 – 64 2.67 C+ 55 – 59 2.33 C 50 – 54 2.00 D+ 47 – 49 1.67 D 44 – 46 1.33 D- 40 – 43 1.00 F 0 – 39 0.00 Fail Insufficient evidence of understanding of the module matter; weakness in critical and analytical skills; limited or irrelevant use of the literature WD - - Withdrawn Withdrawn from a module before census date, typically mid semester F(W) 0 0.00 Fail IN - - Incomplete P - - Pass Given for satisfactory completion of practicum AU - - Audit Given for a module where attendance is for information only without earning academic credit Withdrawn after census date, typically mid semester An interim notation given for a module where a student has not completed certain requirements with valid reason or it is not possible to finalise the grade by the published deadline Note: A student who fails a module with a final grade of D+, D or D- will be allowed to re-sit the examination (or resubmit an assessment) for the failed module, to be determined by the Board of Examiners, before the commencement of the next semester. The maximum passing grade awarded for the re-sit examination will be a grade C (RS), irrespective of the actual mark of the re-sit examination/assessment. (TDS_Handbook 2011, pg 46) FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 6
  • 7. TEMPORARY Assessment Criteria This unit is assessed by coursework in the form of design projects. The general assessment criteria are as follows:       The quality and content of assignments submitted. The clarity in communication of information in the presentation slides or boards. Clearly and logically organised of the report structures. Creativity in presenting the works. Conclusion based on the student’s evaluation of the site visits. Proper referencing quoted. All assignments must be completed and submitted to receive a final completion grade in this unit. In the case where assignment is NOT completed or NOT submitted, a final grade of FX (Did Not Submit) will be issued for the assignment and subsequently an X (Incomplete) will be issued for the course. References 1. 2. 3. 4. 5. Ching, Francis D.K. 2002. Architectural Graphics. John Wiley & Sons, Inc, New York, 4th ed. Ching, Francis D.K. 2002. Architecture: Form, Space and Order. Van Nostrand Reinhold. Ching, Francis D.K. 2000. Drawing: A Creative Process. John Wiley & Sons, Inc, New York. Clark, Roger H. 2004. Precedent in Architecture: Analytical Diagrams, Formative Ideas, and Partis. 3rd ed., John Wiley & Sons, Inc, New York. Lawson, Bryan.1994. Design in Mind. Butterworth, Oxford. FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 7
  • 8. TEMPORARY Module Schedule (DV) – September 2012 Week/ Date W1 Lecture / Topic/ Event (Monday) L1.Introduction Tutorials/Activities (Friday) Briefing – Project 1A The Design Journal Submission & Brief W2 L2. Sketching Part 1 [Tutorial] Project ONE A [IDJ 01 Brief] W3 L3. Sketching Part 1 [Tutorial] Project ONE A W4 L4. Principles & Elements of Design Briefing – Project 1B [Tutorial] Scale + Arch Handwriting [Tutorial] Project ONE A W5 L5.Drawing Convention PIN UP SUBMISSION 1A 23/10/2013 [Tutorial] Project ONE B W6 W7 W8 W9 W10 W11 W12 W13 ((MEASURING SITE)) [IDJ 02 Brief] IDJ 01 Submission 25/10 [Tutorial] DRAWING SEMESTER BREAK / ACTIVITY WEEK 2nd-10th Nov 2013 L6.Diagrams [Tutorial] Project ONE B [IDJ 03 Brief] IDJ 02 Submission 22/11 L7. Design Process & Design [Tutorial] Project ONE B Concept and Approach L8. Intro to Site Analysis Part 1 SUBMISSION 1B 29/11/2013 EPORTFOLIO Briefing – FINAL PROJECT SUBMISSION L9. Presentation Part 1 [Tutorial] Final Project Part A (group) [Tutorial] Final Project Part B 11/12/2013 HOLIDAY [Tutorial] Final Project Part A (group) SULTAN OF SELANGOR BDAY [Tutorial] Final Project Part B L10. Portfolio + Model Making PRESENTATION FP - PART A 20/12/2013 CHRISTMAS & NEW YEAR 21st-29th DEC 2013 01/01/2014 HOLIDAY [Tutorial] Final Project Part B NEW YEAR W14 L12. Presentation Part 2 PRESENTATION FP – PART B 10/01/2014 17/01/2014 HOLIDAY THAIPUSAM [Tutorial] Final Project Part C W15 [Tutorial] Final Project Part C W16 L13. Visual Montage W17 Presentation Preparation IDJ 03 Submission 14/12 [IDJ 05 Brief] IDJ 04 Submission 3/1 CHINNESE NEW YEAR 25th JAN 2014 - 2nd FEB 2014 L14. Final Lecture [Tutorial] Final Project Part C W18 [IDJ 04 Brief] PRESENTATION SUBMISSION FP – PART C - 14/02/2014 Note: This subject outline is module to change with short notice FNBE - Design Visualization [DMZ.SEPT.2013] TEMP 8 IDJ 05 Submission 24/1 IDJ FINAL SUBMISSION ** FINAL EPORTFOLIO SUBMISSION**