The network splitter provides two branches from the main cable run to feed power and network connections to Praesideo units. It supports redundant network connections, can supply power from an external source, and has indicators for power and fault status. The splitter inserts units into the main network without redundancy but allows separate selection of current for each tap-off.
1. Communications Systems | PRS‑NSP Network Splitter
PRS‑NSP Network Splitter
▶ Two current-limited network tap-offs
▶ Supports redundant network connection on main loop
▶ Can feed power from an external supply to the
network
▶ Indicators for power and fault status
The network splitter is used in a network to provide two Certifications and Approvals
branches from the main cable run. It can use an external
DC power supply, or it can use the power supply from the
Region Certification
network controller. The unit automatically switches to the
Europe CE
local power supply unit when it is connected to it,
reducing the power drain on the main network. The TUEV- TUV Certificate IEC60849
network splitter can also function as a repeater, SUED
effectively extending the length of the main network GL GL-SOLAS
another 50 meters.
Safety acc. to IEC 60065 / EN 60065
Immunity acc. to EN 55103‑2 / EN 50130‑4 /
EN 50121‑4
Functions
Emissions acc. to EN 55103-1 / FCC-47 part 15B
The splitter inserts Praesideo units connected to a tap-off Emergency acc. to EN 60849 / EN 54‑16 / ISO 7240‑16
into the main network, however without the redundancy
Maritime acc. to IEC 60945
of the main loop. The maximum current supplied for each
of the two tap-offs is separately selectable. External
power from the local supply is used only for the tap-offs,
Parts Included
and is not fed into the main system cable. The network
splitter has two LEDs for diagnostic purposes.
Quantity Component
Controls and indicators 1 PRS‑NSP Network Splitter
• Power status LED 1 Mounting bracket
• Fault status LED
• Jumpers to configure tap-offs power behavior 1 Power supply connector
Interconnections
• Two system network connections for main network
• Two system network connection for network tap-offs
• External power supply input
www.boschsecurity.com