Brochure of Dpack

东包机械 Dpack Machinery Co.,ltd ————————————————Brochure
东光包装机械有限责任公司 Dongguang Packing Machinery Co.,ltd
电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
http:// www.dpack-carton-machine.com E-mail:yachnezheng@hotmail.com
地址 Address：河北省东光县城观州路 252 号 No.252 Guanzhou Road Dongguang County Hebei China 邮编 CODE：061600
1
HebeiHebei DongguangDongguang PackingPacking MachineryMachinery Co.,ltdCo.,ltd
TELTEL：：（（00860086））317317－－77248537724853 77216897721689 FAXFAX：：（（00860086））317317－－77233417723341
MobileMobile number:+86number:+86 1833375483018333754830 (Ms.Yachne(Ms.Yachne Zheng)Zheng)
hhttp:/ttp:///www.hbdb.netwww.hbdb.net www.dpack-carton-machine.comwww.dpack-carton-machine.com
E-mail:E-mail:yachnezheng@hotmail.comyachnezheng@hotmail.com Skype:yachnezheng@163.comSkype:yachnezheng@163.com
Address:No.252Address:No.252 GuanzhouGuanzhou RoadRoad DongguangDongguang CountyCounty HebeiHebei ChinaChina
CodeCode：：061600061600

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
2
LocationLocation ofof DongguangDongguang CountyCounty
LocationLocation ofof DongguangDongguang PackagingPackaging MachineryMachinery Co.,ltdCo.,ltd

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
3
DongguangDongguang PackingPacking MachineryMachinery Co.,Ltd.Co.,Ltd.
WeWe areare knownknown asas DpackDpack byby ourour worldwideworldwide clients,whichclients,which isis shortshort forfor ourour
companycompany’’ss fullfull name:Dongguangname:Dongguang PackingPacking MachineryMachinery Co.,ltd.ItCo.,ltd.It isis locatedlocated inin
thethe famousfamous HometownHometown ofof CartonCarton MachineryMachinery ofof China----DongguangChina----Dongguang County.WhereCounty.Where
isis famousfamous forfor thethe cartoncarton machinerymachinery industryindustry .There.There areare aboutabout 500500
manufacturersmanufacturers producingproducing cartoncarton machinesmachines andand relatedrelated parts.Someparts.Some ofof themthem
produceproduce printingprinting machinemachine andand soso on.Buton.But therethere areare veryvery smallsmall partsparts ofof themthem
cancan produceproduce productionproduction line.Weline.We cancan saysay wewe areare thethe bestbest ofof themthem andand havehave aa
goodgood reputationreputation here.here.
ItIt transformedtransformed fromfrom aa governmentgovernment ownedowned company:company: thethe ChinaChina NationalNational
PackagingPackaging CorporationCorporation HebeiHebei BranchBranch DongguangDongguang PackagingPackaging MachineryMachinery PlantPlant toto
aa newnew partnershippartnership enterprise.Lookingenterprise.Looking backback thethe pastpast 2020 years,years, wewe havehave faithfaith
inin thethe principleprinciple thatthat qualityquality firstfirst andand integrityintegrity dependencedependence ,constantly,constantly
workingworking onon thethe developmentdevelopment andand manufacturemanufacture ofof 3/5/73/5/7 layerlayer corrugatedcorrugated
paperboardpaperboard productionproduction lineslines andand relatedrelated machinesmachines ,having,having beenbeen alwaysalways atat thethe
forefrontforefront ofof thisthis industryindustry andand wonwon aa goodgood reputationreputation inin thisthis line.line.
wewe wouldwould likelike toto cooperatecooperate withwith domesticdomestic andand abroadabroad friendsfriends inin thisthis
circlecircle earnestlyearnestly andand sincerely,sincerely, workwork hardhard toto expand,expand, shareshare thethe benefits,benefits,
holdhold ourour handshands andand createcreate thethe futurefuture ofof packagingpackaging together.together.
【【ProductProduct】】
【【 3/5/73/5/7 layerslayers corrugatedcorrugated paperboardpaperboard productionproduction line,designline,design speedspeed

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
4
100m/min-250m/min,working100m/min-250m/min,working widthwidth 1400mm-2500mm,having1400mm-2500mm,having beenbeen alwaysalways atat thethe
forefrontforefront ofof thisthis industry.industry. 】】【【 single/doublesingle/double facer,pre-heater,gluingfacer,pre-heater,gluing
machine,machine, hydraulichydraulic millmill rollroll standstand，，NCNC cuttercutter，，slitterslitter scorerscorer，，conveyorconveyor
bridgebridge，，feedingfeeding machinemachine，，stackingstacking machinemachine，，splicersplicer andand soso onon 】】
【【StrengthStrength】】ExportExport machinesmachines fromfrom 2005,Shanghai2005,Shanghai andand BeijingBeijing branches,winbranches,win
goodgood reputationreputation withwith highhigh qualityquality fromfrom buyers,thebuyers,the famousfamous cartoncarton machinerymachinery
companycompany inin Hebei.Hebei.
【【TechnologyTechnology】】partnershipspartnerships withwith thethe EuropeanEuropean Fosber,MassenzanaFosber,Massenzana companycompany ,,
avoidingavoiding thethe drawbacksdrawbacks ofof technologytechnology thatthat mostmost domesticdomestic companiescompanies learnedlearned
fromfrom Taiwan.Taiwan.
【【QualityQuality】】MainMain bought-inbought-in parts,parts, rawraw materialsmaterials andand originorigin areare allall fromfrom famousfamous
Chinese,Taiwan,Japan,Germany,EuropeanChinese,Taiwan,Japan,Germany,European manufacturers.100%manufacturers.100% realreal sparespare partsparts
fromfrom reliablereliable retailersretailers andand wholesalers.wholesalers. LongerLonger useuse life,lowerlife,lower noisy,morenoisy,more
steady.steady.
【【ServiceService】】After-saleAfter-sale departmentdepartment andand fullyfully experiencedexperienced engineersengineers paypay
attentionattention toto thethe clientsclients’’ feedbacksfeedbacks soso thatthat offeroffer themthem timelytimely andand convenientconvenient
services.services.
【【ClientsClients allall overover thethe worldworld】】
Russia,India,Pakistan,Bangladeshi,Syria,SaudiRussia,India,Pakistan,Bangladeshi,Syria,Saudi
Arabia,Iran,Iraq,Afghanistan,Arabia,Iran,Iraq,Afghanistan, Egypt,Ethiopia,Egypt,Ethiopia, Malaysia,Argentina,KosovoMalaysia,Argentina,Kosovo
andand soso on.on.

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
5
【【QualityQuality GuaranteeGuarantee】】
1.1. QualityQuality GuaranteeGuarantee period:period: oneone yearyear afterafter finalfinal acceptanceacceptance
2.2. WithinWithin thethe periodperiod ofof qualityquality guarantee,guarantee, thethe SellerSeller isis obligedobliged toto supplysupply
technicaltechnical assistanceassistance toto thethe BuyerBuyer toto ensureensure normalnormal production.production. WithinWithin thethe
periodperiod ofof qualityquality guarantee,guarantee, inin casecase ofof anyany defectsdefects oror malfunctions,malfunctions, whichwhich
havehave beenbeen provenproven toto bebe causedcaused byby SellerSeller’’ss poorpoor materials,materials, designingdesigning errors,errors,
andand poorpoor fabricationfabrication andand assemblyassembly technology,technology, uponupon receiptreceipt ofof thethe BuyerBuyer’’
ss informationinformation inin writing,writing, thethe SellerSeller willwill sendsend itsits technicianstechnicians immediately.immediately.
3.3. WithinWithin thethe periodperiod ofof qualityquality guarantee,guarantee, inin casecase ofof anyany defectsdefects oror
malfunctions,whichmalfunctions,which havehave beenbeen provenproven toto bebe causedcaused byby thethe BuyerBuyer usingusing
improperimproper material,mis-operatingmaterial,mis-operating andand maintenance,maintenance, uponupon receiptreceipt ofof thethe BuyerBuyer’’
ss informationinformation inin writing,writing, thethe SellerSeller willwill sendsend itsits technicianstechnicians immediately.immediately.
TheThe internationalinternational airair ticketstickets (if(if necessary),necessary), locallocal transportationtransportation andand
accommodationaccommodation willwill bebe borneborne byby thethe buyer.buyer.
4.Delivery4.Delivery timetime :: 30-9030-90 daysdays .(Except.(Except inin exceptionalexceptional circumstancescircumstances ))

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
6
Introduction of Products

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
7
2/3/5/72/3/5/7 layerlayer CorrugatedCorrugated CardboardCardboard ProductionProduction LineLine
Width:1400mm-2500mm,DesignWidth:1400mm-2500mm,Design Speed:100m/min-250m/minSpeed:100m/min-250m/min

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
8
SampleSample ofof 22 layerlayer cardboardcardboard productionproduction lineline configurationconfiguration
OptionalOptional machine:machine:
LaminatingLaminating machinemachine
Design speed:150m/min Economic :110-130m/min
No. Machine name Quantity Remarks
1
Hydraulic Mill roll
stand
2
Hydraulic control, pneumatic brake，two point brake ,
toothing type
2 Railing and tracks 4
3 Single facer 1
Absorption type, Inverter motor,Corrugating
roller ￠320mm from Beijing, electric adjust gluing
width,gear of gluing part from Japan,adjust glue
according to the speed,E flute
4 Bridge conveyor 1 Frequency Control
5 Pre-heater 2 ￠900mm, electric adjust wrapping angle
Glue making
system
1 Automatic circle glue, pipeline provided by buyer
6
Slitter scorer with
cut off
1
7 Stacker 1

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
9

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
10
Design speed:120m/min Normal work speed:80-100m/min
No. Machine name Quantity Remarks
1 Mill roll stand 3 Hydraulic mill roll stand
2 Railing and tracks 6
3 Single facer 1
Corrugating roller ￠280mm,main bearing adopt
NSK,pneumatic control,high precision rollers
4 Pre-heater 1 ￠600mm, electric adjust wrapping angle
5 Pre-conditioner 1 ￠600mm electric adjust wrapping angle
6 Bridge conveyor 1 Adsorption type, electric deviation-correcting
7 Duplex pre-heater 1 ￠600mm electric adjust wrapping angle
8 Gluing machine 1
Pneumatic adjust pressing roller,glue roller
diameter :318,glue uniform.
9 Double facer 1
Heating plants: 600mm×12, with cooling
section,cotton belt adopt FULI Shenyang.
10 Slitter scorer 1 5 blades with 8 scorers
11 NC cutoff 1 Helical knives ,diameter:188
12
Cardboard feeding
machine(Satcker)
1 Automatic counter. Output device
13 Main drive 1 Diameter :636
14
Glue making
system
1
Include main pot 1 set, carrier pot 1 set, and storage pot 2set, include
glue station pump, single facer glue pump and gluing machine glue
pump. Circle supply glue, pipeline provided by customer
15 Electric system 1 Adopt Chint brand
16 Steam system 1 Pipeline on valves provided by buyer
17 Pneumatic system 1 Adopt Chinese best drain valve

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
11
Design speed: 200m/min Economic work speed: 150-180m/min
No. Machine name Qty Remarks
1 Mill roll stand 5
Full hydraulic control, pneumatic multi-point control
brake, the sawtooth chuck,hydraulic station adopt
Taiwan product
2 Railing and track 10 Include 8m railing and track.
3 Single facer 2
Corrugating roll diameter 360mm, adopt 48CrMo alloy steel, According to
speed automatic glue, glue area is electrically adjusted,main bearing adopt
Japan NSK brand, gluing part could move out the machine
4
Double layer bridge
conveyor
1 Frequency adjust wind adsorption, electric correct error
5 Pre-heater 2 Diameter 900mm, electric adjust wrapping angle.
6 Pre-conditioner 2 Diameter 900mm, electric adjust wrapping angle
7 Triplex pre-heater 1 Diameter 900mm, electric adjust wrapping angle
8
Duplex Gluing
machine
1
Gluing roll diameter 318mm, figure show gluing
details, main bearing adopt NSK brand
9 Double facer 1
Big worm gear box,automatic skew detection,frequency
control,Heating plants 600mm×18set,hydraulic lift-down, 12
pieces of clamp ,Hot plate chrome,protective cover
6
Double layer bridge
conveyor
1 Frequency adjust wind adsorption, electric correct error

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
12
10 Main drive 1 Independent reducer box, gimbal driving.
11 NC slitter scorer 1 Changing order time 3-8 seconds
12 NC cutoff 1 adopt Germany servo driver, diameter :228
13 Stacker 1 Transverse output，automatic counter
14 Glue making system 1
Include main pot 1 set, carrier pot 1 set, and storage pot 2set, include glue
station pump, single facer glue pump and gluing machine glue pump.
Circle supply glue, pipeline provided by customer
15 Pneumatic system 1
Include steam-water separator and gas storage pot,
pipeline and air-compressor supply by customer.
16 Electric system 1
Whole line main motor frequency adjust speed, electric part adopt ABB or
Schneider product, Motor and reducer adopts Taiwan product, imported
transducer.
17 Steam system 1
Adopt imported brand valve and drain valve, pipeline
provided by customer
MachineMachine DetailsDetails

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
13
SF-280S Single Facer
Technical specification:
Working width: 1400mm-1800mm
Designed speed: 120m/min, normal work speed: 80-100m/min
Working pressure: 0.6-0.9Mpa Steam work pressure: 0.9-1.3Mpa
Steam consumption: 0.5-0.8t/h Temperature requirements: 160-200℃
Machine power: 26.2kw
Working power: 380V, 50Hz
Dimension: 3200mm*1500mm*1800mm
Structure characteristic:
1.Cardboard transmitting method adopts wind absorption, and keep flute profiles stable under the running condition of
high speed.
2. The wind machine absorbs corrugated paper to corrugated rollers through vacuum box and form corrugated profile.
3. The width of wind groove of lower roller is not exceeding 2mm,and will less fringe marks of single corrugated
paperboard.
4.Transmission part adopt gimbal transmission, away from vibration source, and make the transmission more steady
and reliable, and easy to maintain.
5. The speed reducing box is oil-lubricating, close gear transmission, and will reduce machine vibration.
6. Upper corrugated roller surface are treated by special mesh snicked and chrome plated.
7.Upper-lower corrugated roller are made of high quality 48CrMo alloy steel, and after heat-treatment, the rigidity is
HRC 55-62, the surface are grinded and plated chrome.
8.Flute profiles: A flute heigh:4.7mm C flute height:3.75mm B flute heigh : 2.65mm E flute heigh1.5mm
（the flute profiles can be made according to client’s requirements）
Main part technical:
1.Upper corrugated roller: ￠278mm lower corrugated roller: ￠280mm Origin: Beijing

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
14
2.Pressure roller: ￠292mm, #45seamless steel pipe with quenching treatment
3. Applicator glue roller: ￠240mm 45# seamless steel pipe
surface are treated by special mesh netting and chrome plated
4.Doctor glue roller: ￠120mm, 20# seamless steel pipe
5.Pre-heating roller : ￠265mm 20G steel from Jinan Steel Wall thickness:20mm
Main bought-in parts, raw materials and origin:
1.. Wall plate two sides and seat materials: HT200 Origin : Hebei
2.. The seat materials of transmitting unit: welded with channel steel
3. Rotary joints, metal soft tube: Luguanqiu Shandong
4. Common bearing: Wa, Ha, Luo, bearing with seat: Deyuan, Fujian (Chinese best product)
5. Motor: Main motor: 15KW 1set continuous working
Wind absorption machine: 11KW 1 set continuous working
6. Electrical appliances: Chint, China
r. Pneumatic parts: Airtac, Taiwan
SF-320D Single Facer
A . Parameter :
Machine width: 1400mm-2200mm
Max speed: 150m/min
Normal work speed:120-130m/min
Working pressure: 0.6-0.9Mpa, steam work pressure: 0.8-1.3Mpa
Steam consumption: 0.5-0.8t/h Temperature requirements: 160-200℃

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
15
Machine power: 33.95kw Working power: 380V, 50Hz
Dimension: 3200mm*1800mm*2100mm
B . products characteristics :
* Cardboard transmitting method adopts wind absorption, and keep flute profiles stable under the
running condition of high speed.
* The wind machine absorbs corrugated paper to corrugated rollers through vacuum box and form
corrugated profile.
* The width of wind groove of lower roller is not exceeding 2.5mm,and will less fringe marks of single
corrugated paperboard.
* Transmission part adopt gimbal transmission, away from vibration source, and make the transmission
more steady and reliable, and easy to maintain.
*The speed reducing box is oil-lubricating, close gear transmission, and will reduce machine vibration.
* Glue unit adopts auto-supply glue circularly, pneumatically reset and has buffering effect.
* Glue area will be electrically adjusted, glue unit can be running independently when machine steppes,
and prevent glue running out.
* Upper corrugated roller surface are treated by special mesh snicked and chrome plated.
*Glue unit indepent drive, pump-draw style, easy maintain and clean. (See drawing 1)
1 2
*Corrugated forming unit is designed with small independent wall plate. The roller is easy to
disassembly, maintain, and quickly change flute profiles. ( See drawing 2)
* Upper-lower corrugated roller are made of high quality 48CrMo alloy steel, and after heat-treatment,
the rigidity is HRC 55-62, the surface are grinded and plated chrome.
*Flute profiles:A flute height 4.7mm B flute height 2.75mm E flute height 3.75mm
（the flute profiles can be made according to client`s requirements）
Parameter of main parts:
a. Upper-lower corrugated roller are made of high quality 48CrMo alloy steel, and after
heat-treatment, the rigidity is HRC 56-60, the surface are grinded and plated chrome.
b.Upper corrugated roller: ￠318mm lower corrugated roller: ￠320mm Origin: Beijing
c. Pressure roller: ￠340mm, #45seamless steel pipe with quenching treatment
d. Applicator glue roller: ￠240mm 45# seamless seel pipe, from Chengdu
surface are treated by special mesh snicked and chrome plated
e.Doctor glue roller: ￠120mm, 20# seamless seel pipe, from Chengdu

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
16
f. Pre-heating roller : ￠400mm 20G steel from Ji Steel Wall thickness:20mm
C . Raw materails and bought in standard parts:
Wallplate two sides and seat: HT250 Origin : Hebei
The seat materails of transmitting unit: welded with channel steel
Rotary jionts, metal soft tube: Lu guan qiu Shandong
Bearings：(mainly)NSK Japan;
Common bearing: Wa, Ha, Luo, bearing with seat: Jinrun,Zhejiang (Chinese best product)
Engines: Main engine: 22kw 1set continous working
Wind absorptin machine: 11kw 1set continous working
Glue unit self-running engine:0.75kw 1 set Chengbang, Taiwan Short time work
Glue width-adjusting engine: 0.1kw 2sets Chengbang, made in Taiwan Short time work
Eletric appliances: Chint, China Pneumatic parts: Airtac, Taiwan
Single Facer SF-360
Max speed : 200m/min ,Economic speed:150-180m/min
Width : 1400-2500mm
Flute profiles : A/B/C/E avaliable
* Cardboard transmitting method adopts wind absorbption, and keep flute profiles stable under the
running condition of high speed.
* The wind machine absorbs corrugated paper to corrugated rollers through vacuum box and form
corrugated profile.
* The width of wind groove of lower roller is not exceeding 2.5mm,and will less fringe marks of single
corrugated paperboard.
* Transmission part adopt gimbal transmission, away from vibration source, and make the transmission
more steady and reliable, and easy to maintain.
*The speed reducing box is oil-lubricating, close gear transmission, and will reduce machine vibration.
* Glue unit adopts auto-supply glue circularly, pneumatically reset and has buffering effect.

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
17
* Glue area will be electrically adjusted, glue unit can be running independently when machine steppes,
and prevent glue running out.
* Upper corrugated roller surface are treated by special mesh snicked and chrome plated.
*Glue unit indepent drive, pump-draw style, easy maintain and clean. (See drawing 1)
1 2
*Corrugated forming unit is designed with small independent wall plate. The roller is easy to
disassembly, maintain, and quickly change flute profiles. ( See drawing 2)
* Upper-lower corrugated roller are made of high quality 48CrMo alloy steel, and after heat-treatment,
the rigidity is HRC 55-62, the surface are grinded and plated chrome.
*Flute profiles:A flute heigth 4.7mm B flute heigth 2.65mm E flute heigth1.5mm
（the flute profiles can be made according to client`s requirements）
15. Parameter of main parts:
a. Upper-lower corrugated roller are made of high quality 48CrMo alloy steel, and after
heat-treatment, the rigidity is HRC 55-62, the surface are grinded and plated chrome.
b.Upper corrugated roller: ￠360mm lower corrugated roller: ￠360mm Origin: Shanghai
c. Pressure roller: ￠328mm, #45seamless steel pipe with quenching treatment
d. Applicator glue roller: ￠250mm 45# seamless seel pipe, from Chengdu
surface are treated by special mesh snicked and chrome plated
e.Doctor glue roller: ￠140mm, 20# seamless seel pipe, from Chengdu
Raw materails and bought in standard parts:
h. Wallplate two sides and seat: HT250 Origin : Hebei
I. The seat materails of transmitting unit: welded with channel steel
j. Rotary jionts, metal soft tube: Quanzhou Yuquan
k. Bearings：(mainly)NSK Japan;
l. Common bearing: Wa, Ha, Luo, bearing with seat: Jinrun Fujian (Chinese best product)
m. Engines: Main engine: 1set continous working
n. Wind absorptin machine: 1 set continous working
o. Glue unit self-running engine: 1 set Chengbang, Taiwan Short time work
p. Glue width-adjusting engine: 2sets Chengbang, made in Taiwan Short time work
q. Eletric appliances: Chint, China
r. Pneumatic parts: Airtac, Taiwan

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
18
Cassette Type Single Facer-360/408 （Not
including spare corrugated roller)
Machine specification:
*Corrugated roller flute can be choose A,B,C,E,F(Tungsten carbide roller are optional)
*Corrugated roller is positioned under the pressure roller, it will be reduce the machine center of
gravity and reduce vibration
*Adopt inner suction type corrugated roller,so the cardboard will be more flattening
*Glue unit adopt independent driver,the whole unit can be movable,easy to clean and repair
*Steam inlet and outlet adopt fixed connection
*Corrugated roller,pressure roller,glue roller,locking all adopt pneumatic control
*Machine design speed:150m/min(360) 250m/min(408)
*Machine paper working width:2500mm
*Corrugated roller diameter 408mm, lower corrugated roller diameter 325mm,the material is 48CrMo
alloy steel
*Pressure roller diameter 450mm
*Glue roller diameter 310mm
*Doctor roller diameter 190mm
*Preheater roller diameter 500mm automatic rotary
Main parts brand:
*Main motor:37KW Taiwan TECO brand

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
19
*Glue unit motor 4KE(servo motor Mitsubishi brand)
*Glue area motor:200w 2 sets Taiwan brand
*Electrical main adopt ABB,SCHNEIDER brand
*PLC touch screen is Mitsubishi brand
*The Roots blower is import brand
Electric shaftless mill roll stand
Technical parameters:
* Backstands action: electric swing
* Jam range (working width): Maximum 1850mm Minimum 900mm
* Jam diameter: ¢ 1400mm maximum minimum ¢ 400mm
* Unilateral maximum weight: 1500kg maximum
* Total power: 4.5kw
* Power supply: voltage 380V 50Hz frequency
* Overall dimensions: 4000 × 2100 × 1000 (L × W × H)
Structural features
* Jam width 400-1800mm
* Paper lift, clamp, loosen, movement, the pair are electrically operated
* Paper tension adjusting pneumatic brakes, disc brakes manually
* Electric Chint production

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
20
RS-1500H Hydraulic Mill Roll Stand
Technical Parameter:
*Stand move mode： Full hydraulic action
*Working width： 1400-2500mm Min 900mm
* Paper diameter： Max￠1500mm Min￠350mm
*Single Load： Max 3000kg
*Stand main bearing diameter：￠210mm
*Air working pressure（MPa）：0.6～0.9MPa

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
21
*Total power：5.5kw
*Working power：Pressure380V Frequency50Hz
*Dimension：3850×1600×1650（L×W×H）
Hydraulic system parameter
*Working pressure（MPa）： 12～16 MPa
*Hydraulic pump working span(swing): ￠100mm×460mm
*Hydraulic pump diameter (clamption): ￠63mm×670mm
*Hydraulic station motor power:5.5kw Continuous work
*Hydraulic station electro magnetism working pressure：220V 50Hz
Characteristic
*Symmetry structure could install two bundles real paper at the same time, and change the paper without any stop.
*Adopt hydraulic drive that could make the real paper lift-lower, clamp and release and move.
*Adopt pneumatic strain to adJiust the real paper.
*Expanding clips design.
*Tension control by pneumatic brake system, manual controlled and also can be controlled by splicer.
Raw materials and bought in parts：
*Stand main bearing adopt：High quality thick-walled seamless steel pipe. Origin: Chengdu
*Two side wall plates and arms adopt: HT200 casting Origin: Hebei
*Main beam like channel steel: 280mm Origin: An steel
*Bearing：made in Ha, Wa , Luo .
*Electrical device：made in Chint, ZheJiiang.
*Pneumatic component: Airtac, Zaozhuang Origin: Taiwan, Shandong
*Hydraulic： Beiye Group(Huade) Origin: BeiJiing Zaozhuang, Shandong
Heavy type Hydraulic Mill Roll Stand
Description:
This machine control by full hydraulic
Specification:

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
22
1. Working width: 1800-2500mm
2. Paper roller diameter: Ø1500MM, Min clamp paper diameter: Ø350MM。
3.pneumatic work pressure(MPa) :0.6-0.9Mpa
4.Whole line power :4.0kw
5. work voltage :380V 50Hz
6.machine size :3850*1600*1650(L*W*H)
Hydraulic system parameter :
Work pressure : (MPa)12-16Mpa
Hydraulic cylinder work range (moving) :￠100mm×460mm
Hydraulic cylinder diameter : (clamp) ￠63mm×770mm
Hydraulic motor power : 4.0kw
Hydraulic electromagnetic work voltage : 220V 50 Hz
splicer
A . Parameter:
Max feeding paper : 200m/min
Working width : 1800-2200mm
Suit for : hydraulic mill roll stand . Reel paper diameter : 1500mm
Feeding paper time : 3 seconds
B . Products characteristics :
SP-03 adopt pneumatic control, the spare parts (pneumatic pipes, pneumatic cylinder , coil ,switch ,electromagnetic
valve)adopt imported brand FESTO
The machine cut paper knives has more than 15years working life , do not need change
PLC control main electric , other adopt Schneider , more stable .
The feeding paper part , only need feed paper 4cm by people , others , the machine can feeding paper by automatic ,
save time .
Success rate : 99%

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
23
Railing for Reels
* Pushes the paper in place, light and flexible.
* Tracks are whole underground, main frame use #16 steel welded together, strong and durable.
* Cover plate welding after installation on site.
SH-600,900,1000D Pre-heater

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
24
A .Parameter :
Pre-heater drum diameter: 600mm,900 mm, 1000mm Pre-heating scope: 60-270 degree
manufacture width: 1800mm Working pressure: 0.8～1.3Mpa
Working power: 380V50Hz Whole machine power: 0.55kw
Dimension: 3200mm*1300mm*1200mm(L*W*H)
* Each roller surface is well whetted and chrome plated, sooth and durable.
* Electromotion adjust the dimension of pre-heater, the range of adjustment: 60-220 °
*The pre-heating roller is made according to national container safty standard
*Pre-heating roller and guiding paper roller are electically galvanized
* Electromotion adjust the dimension of pre-heater, suitable with defferent grades of paper and
machinery speed
C . Raw materials and bought-in parts :
a. Wall plate two sides：HT250 casting Origin ：Hebei
b. Transmitting paper roller: steel 20# Origin: Bao Steel Group in China
c. Pre-heating roller: 20G steel，wall thickness 20mm Origin: Jinan Steel Group in China
d. Main bearing from Ha, Wa, Luo, the shaft with seat is from Jinrun.Zhejiang
e. Steam rotary connecting jionts, metal soft tube: Lu guan qiu Shandong(largest manufacturer in
China)
f. Water valves: made in Shanghai
g. Adjustment engine: speed reduing ratio:1:100 made in China short time
h. Electric appliance: Chint, China

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
25
BS－T Single/Double/Three layer bridge conveyor
Technical Parameter
*Working width：1400-2500mm
*Design speed：100-250m/min
*Dimension：33200mm×4530mm×3160mm
*Guiding paper roller: Upper, front ￠135mm Upper, behind ￠135mm
*Slow transmitting paper roller: active roller￠135mm passive roller￠135mm
tension roller￠85mm hang roller￠100mm
absorption transmitting paper roller：￠100mm
*Electricity: 380V 50 Hz Total Powers: 8.1kw
Characteristic
* Exactly transmitting single facer corrugated cardboard to strain-tighten set or wind absorption set through
transmitting belt, for next process use.
* Adopting wind absorption strain-tighten set, 3 KW high-voltage centrifugal fan vacuum adsorption strain set, electro
motion correct deflection, to make sure cardboard stick tightly and level off.
* Electric control install two groups of operation plate, upper and lower bridge can be adjusted arbitrarily.
* On paper-receiving unit, adopt independent conversion driver, transmit the single corrugated cardboard across the
bridge and keep enough cardboard quantity on bridge to meet the changing production speed, pre-heated by multi
pre-heater, and stick through gluing machine and double facer.

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
26
* Equipped upward paper carrier, and two groups of transmitting belt conveyors, the transmitting speed is slowly, so as
to form wave-like stacking, and to store corrugated cardboard.
Raw materials and bought in parts
*Channel steel of main bridge：# 20 steel Origin: An Steel
*Paper-receiving unit transmitting belt: Nylon industry belt.
* Paper storage unit transmitting belt: Parallel transmitting belt
* Guiding paper engine( conversion control）： 4.0 kw 1 set continuous work Origin Wuxi
*Absorption tension engine: 3.0 kw 1 set continuous work Origin Wuxi
*Paper width adjustment engine: 0.55 kw 2 sets short time work Origin: Hengshui
* Bearings: Wa, Ha, Luo bearing with seat :Jinrun, Zhejing.
* Electric appliances: Chinti Zhejiang
Double Facer 636/754/850

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
27
Technical Parameter：
Working width：1400-2500mm
Max. machinery speed：100-200m/min
Temperature required：160～200℃ Steam pressure：0.8～1.3MPa
Steam consumption：1.2～1.8t/h Compressed air pressure：0.6～0.9MPa
Heating plate length：12350mm(600mm×20) cooling section length：5000mm
Total power：60.5kw
Electricity: 380V 50Hz
Dimension: 23454mm×2360mm×1950 mm (Lx W x H)
Heating plate unit
Dimension：1990mm×600mm×135mm.(L x W x H)
Material: 20G steel, Ji Steel
Process technique: surface is whetted
Join method: single cross type,
Temperature method: many groups controlled.
Pressure method: adopting dense pressure roller style
Pressure roller diameter：￠60mm solid 45# steel. Origin Shou Steel
Supporting roller diameter: ￠60mm solid 45# steel Origin Shou Steel
Characteristics
*Whole body is high strength channel steel, stable, beautiful, suitable for high speed machinery
running.
*Heating plate is made according to national container safety standard, of 600mm steel. Inside, S type
construction will raise the steam usage efficiency. More welded rods will keep heating plate unchanged
in shape.
*Heating section is tense pressure roller structure, cardboard sticks firmly and levels off.
*Steam pipes enter mouth, drainage mouth is S type, heating plate temperature is balanced and evenly.
*Heating plate’s temperature is different in different section, suitable to different machinery speed.
*Heating section pressure roller is hydraulic lifting whole body, stable, safety and reliable.
* The upper canvas strap is equipped electro motion or manual deflection adjusting set, one pneumatic
strain set, one manual strain set. The lower canvas is equipped strain and left-right adjustment set.
* Drive unit adopts wearable, mesh rubber of big diameter, less belt skip, and raise stability when
machinery running
*Independent speed reducing box, less noise, roller diameter￠850mm adopts seal oil lubricating
gears.
Raw materials and bought-in parts
Heating section main beam：280# channel steel Origin: An Steel
Cooling section main beam：250# channel steel Origin: An Steel
Hydraulic station: Beiye Group(Huade) Origin: Beijing, Zaozhuang, Shandong
Cotton belt: Origin: Fuli Shenyang
Driving unit wall plates two sides: 20# Steel Origin: Hebei

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
28
Rotary join tie-in, metal tube steam: Johnson, Luguanqiu, Shandong.
Bearings: Ha, Wa, Luo, the bearing with seat is from Jinrun, Zhejiang
Electric appliances: Chint, Zhejiang
Driving part:
1. Main motor drive upper and lower driving rollers by cotton belt, makes the carton to next process.
2. Steel rollers covered with high quality wear-resistant rubber with “V” stripe.
3. The driving gear box adopts oblique gear structure, high strength, low noise, and convenient for
maintaining.
4. Easy to inject lubricate oil for the gear box.
5. Upper roller diameter Ø850MM
6. Lower roller diameter Ø850MM
7. Main power: 90kw, frequency motor with transducer.
Double/Three layer Gluing Machine
A .Parameter:

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
29
Working width: 1600-2500mm
Max work speed: 150-200mm/min
Gluing roller diameter: φ318—3pcs
Steel pipeline product, surface do special grinding and hard chromed.
Doctor roller diameter: φ160---2pcs
Steel (S45C)，grinding and do hard chromed.
Preheating of wheel diameter: 400 (upper) - single face corrugated paper used (3) of 500 (lower) - (1)
with tissue paper
Steel tube products, and each round of compressive capacity through the national pressure vessel
pressure test, and attached the certificate.
Pressing roller: φ130—3pcs carbon steel, do grinding and polishing treatment.
Leading paper roller: φ110—6pcs, steel product, hard chromed and polishing treatment.
Pneumatic cylinder: (Upper pressing roller lift-down) -----6pcs
The main drive motor: 5HP*4P*1/5 ----3 station, upper and lower single drive.
Structure characteristics
Taiwan imported deceleration motor, control its speed drive configuration one station to set and hot
plate synchronization, in a brief shutdown when the main motor at low speed operation in order to make
the paste to paste the wheel surface will not dry.
* paste thickness by electric digital display control, with the city states of Taiwan gear reducer motor
GH1/4HP*4P*1/1800. (plus decoder OEW2#X2)
* pressure wheel height with electric adjustment, with the city states of Taiwan gear reducer motor
GH1/4HP*4P*1/1800.
Structure
* wall: made of 40MM thick steel plate, the structure is stable.
The connection machine and machine wall wall with two 200# channel steel bracket, and two 3 inch
seamless pipe bracket connected.
With the electrical box, beautiful appearance.

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
30
NC Slitter Scorer
Technical Parameter
*Design speed：150-200m/min
*Max. slitting width：25000mm
*5 blades 8 scores *the whole machine can move left-right ±90mm
*Whole machine dimension：3650×1450×2380
*Total power：7.75kw
*Electricity：380V 50Hz
*Working pressure：0.6~0.9 MPa
*Comparative moisture：20％～90％ *Temperature required：5～50℃
Specification:
High quality imported industry computer ad PLC equipped composing the CNC system.
High quality beeline rail and high –precision screw conveying guarantees a
≤±0.5mm slitting and scoring precision.
A memory of 999 orders. Non-stop changeover or manual change over can be realized.
Automatic synchronize with the corrugator and can also get in line with manufacture management system. High
compatibility.
Quick changeover within 3 to 8 seconds. Application of two machine can realize non-speed reduction changeover.
Thin tungsten steel alloy blade, sharp and long life of over 8 million meters.
Patent grinding system applied for easy grinding and maintenance.
Computer controlled auto grinding and manual grinding also applicable. Alternatively grinding to increase efficiently.
Three score types for single wall, double wall and triple wall, which can also be altered with electrical driven system.
Scoring can also be computer controlled with fine scoring results.
Imported synchronous belt applied for conveying with higher precision, longer life and lower noise.

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
31
*Mail wall plate two sides: Q235A
*Cutting motor ( frequency control ): 4 kw 1 set continuous work
*Scorer motor: 3 kw 1 set continue work
* Horizontal movement motor: 0.75kw 1 set not continuous work
*Blade: Diameter 200mm Materials: rigid alloy steel
*Bears are from Wa, Ha, Luo cities
*Electric appliances: Chint Zhejiang
*Pneumatic cylinder, pneumatic parts: Tianyuan, Origin: Shandong
NC Cut Off machine
A . parameter :
1.work width: 1400-1800mm
2.Design machine speed: 150-200m/min
3.Cutting length: 500mm-9999mm
4.Cardboard: original paper: ＜360g/ liner paper＜200g/
thickness3－14mm moisture content ＜10％
min. width warping1000mm ＜30mm
5.Comparative moisture：20％～90％ *Temperature required：5～50℃
6.Working pressure：0.6~0.9 Mpa
7.Cutting cardboard blade shaft diameter：upper￠ 188 mm low￠ 188 mm
8.Guiding cardboard shaft diameter:
front upper ￠165mm(sun wheel) front lower￠135mm

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
32
Back upper ￠165mm back lower ￠135mm
9 Electricity ：voltage 380V frequency 50Hz current 80A
10 Total power：34.78kw
11Whole machine dimension：3000×1600×1500
*Special structure design, high tensile strength wall plate and seat, there are watching window on wall
plate two sides, convenient and easy to maintain.
* Transmitting system adopts oil pump auto-cycling lubricating, make sure transmitting precision.
*Adopting high precision, high rigidity whetted gears, bearing high running and durable, make sure
blade-edge joggle exactly, cardboard is level off and clean
*high precision shaft, blade carrier design, cutting stably when machine high speed running
*Special changing blade structure, quickly and easily changing blade
*The system is made according to C.E. standard, and has been strictly tested by industry computer. The
quality, life, and stability can be guaranteed.
*Driving unit adopts A.C.Servo drive, quickly and exactly acts.
*Special electricity structure design, more saving electricity, can avoid the problems of not stable
electricity.
*Adopts special power bring and storage type deisgn, save electric and could overcome electric voltage
not steady environment.
*System has self test function, can prevent machine loss because of abnormal usage and false operation
* Computer automatically adjusts cutting speed according to cardboard specifications and production
speed, automatically follow cardboard running speed, assure in –phase.
* Computer reserves 999 groups of order, and auto-complete based on the program and preferential
condition, the screen display various production message.
*Cutting length: 500~9999mm，cutting precision :±1mm。
*Rotary blade is made in Tainwan
*Shaft bearings are from NSK, Japan, suitable for machine high speed running, durable.

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
33
Wall plates two sides and seat: HT250 casting Origin: Hebei, China
Upper lower shaft: 45# steel
Balde:W18crv5Co5（high speed tool steel）
Gear:40Cr whetted, quenched and tempered
Main drive engine(a.c. servo)power: 30kw 1set Origin: China
Transmitting cardboard engine power: 2.2kw 2set Origin: Hengshui
Oil pump engine power: 0.37kw 2set Origin: Zhejiang
Computer control system, Computer system made in Taiwan.
Bearing: (main)NSK Japan (common) Wa, Ha, Luo (bearing with seat)Jinrun,Zhejiang
Electric appliances: Chint, China
Pneumatic parts: Airtac Taiwan, Tianyuan Shandong
NC Cut Off Machine Double Rows Type

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
34
A . parameter :
1.work width: 1600-2500mm
2.Max machine speed: 120-180m/min
3.Cutting length: 500mm-9999mm cutting precision:±1mm(under Uniform speed)
4.Cardboard: original paper: ＜360g/ liner paper＜200g/
thickness3－14mm moisture content ＜10％
min. width warping1000mm ＜30mm
5.Comparative moisture：20％～90％ *Temperature required：5～50℃
6.Working pressure：0.6~0.9 Mpa
7.Cutting cardboard blade shaft diameter：upper￠ 224 mm low￠ 228 mm
8.Guiding cardboard shaft diameter:
front upper ￠165mm(sun wheel) front lower￠135mm
Back upper ￠165mm back lower ￠135mm
9 Electricity ：voltage 380V frequency 50Hz current 80A
10 Total power：69.18kw
11. Whole machine dimension：4240mm×19400mm×2100mm（L×W×H）

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
35
*Special structure design, high tensile strength wall plate and seat, there are watching window on wall
plate two sides, convenient and easy to maintain.
* Transmitting system adopts oil pump auto-cycling lubricating, make sure transmitting precision.
*Adopting high precision, high rigidity whetted gears, bearing high running and durable, make sure
blade-edge joggle exactly, cardboard is level off and clean
*high precision shaft, blade carrier design, cutting stably when machine high speed running
*Special changing blade structure, quickly and easily changing blade
*The system is made according to C.E. standard, and has been strictly tested by industry computer. The
quality, life, and stability can be guaranteed.
*Driving unit adopts A.C.Servo drive, quickly and exactly acts.
*Special electricity structure design, more saving electricity, can avoid the problems of not stable
electricity.
*Adopts special power bring and storage type deisgn, save electric and could overcome electric voltage
not steady environment.
*System has self test function, can prevent machine loss because of abnormal usage and false operation
* Computer automatically adjusts cutting speed according to cardboard specifications and production
speed, automatically follow cardboard running speed, assure in –phase.
* Computer reserves 999 groups of order, and auto-complete based on the program and preferential
condition, the screen display various production message.
*Cutting length: 500~9999mm，cutting precision :±1mm。
*Rotary blade is made in Tainwan
*Shaft bearings are from NSK, Japan, suitable for machine high speed running, durable.
Wall plates two sides and seat: HT250 casting Origin: Hebei, China
Upper lower shaft: 45# steel
Balde:W18crv5Co5（high speed tool steel）
Gear:40Cr whetted, quenched and tempered
Main drive engine(a.c. servo)power: 30kw 2set Origin: China
Transmitting cardboard engine power: 2.2kw 2set Origin: Hengshui
Oil pump engine power: 0.19kw 2set Origin: Zhejiang
Computer control system, Computer system made in Taiwan.

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
36
Bearing: (main)NSK Japan (common) Wa, Ha, Luo (bearing with seat)Jinrun,Zhejiang
Electric appliances:Schneider,France Chint, China
Pneumatic parts: Airtac Taiwan, Tianyuan Shandong
CF-100T Cardboard Feeding Machine(Stacker)

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
37
Technical specification:
1. Max length for carton sheets: 2300mm
2. Design speed: 100-150m/min
3. Working pressure: 0.6～0.9Mpa
4. working power: 380V, 50Hz
5. Machine power: 6.6kw
6. Dimension :8800mm*2200mm*1500mm(L*W*H))
7. Machine weight: 4.5Ton
Structure characteristic:
Automatic collect and stack the carton sheets.
Electric control horizontal output.
Adopts wider belt for transport the carton sheets.
Stack carton sheets to the top, button control to push the carton sheets.
Transport belt motor: 4kw, 1set, continue work, made in Deyi group, China
Horizontal output motor: 1.5kw, 1set, interruption work, made in Deyi group, China

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
38
Transport belt: Industry belt, made in Tianjin Weite group, China
Main frame channel steel: 160# channel steel
Electric appliances: Chint, China
Bearing: From Ha, Wa ,Luo . the bearing with seat made in Fujian Deyuan
PS-200 Double Layer Basket Style Stacker
A .Parameter:
Working width:1800-2500mm Min:300mm
Max machine speed:200m/min Working speed:180m/min
Stack length:Max3000mm Min:500mm
Max stack height:1800mm(stack height should not exceed three times the height of cardboard)
Air pressure:0.6~0.9MPa
Working voltage：380V 50Hz Total power:18.25kw
The machine dimensions：17300mm×2600mm×2800mm（L×W×H）
B .characteristics :
Lifter automatic stack,lift-lower adopt hydraulic style,steady and quickly
With hydraulic-motion transmission horizontal..
Adopt entire wide conveyor belt with prevent deflection,balanced transmit.
Regulation car plate automatically positioning to meet the needs of different size cardboards.
Automatic counting detection and control ,can also be achieved partial manual button operation ,and
automatic control stacking
Transport motor adopts frequency conversion motor, synchronous with the production lines.
All transmission,counter,batch and stack of cardboard controlled by PLC,Automatic cycle working.
C. Raw material and bought-in parts :
Up layer transmit motor:3.0kw 7sets continuos working origin：Deyi brand,Jiangsu
Lifter motor:18.5kw 1set continuos working origin：Deyi brand,Jiangsu
Regulation car motor: 0.75kw 1 set continuos working origin：Deyi brand,Jiangsu
Draught fans: 11KW 1set
Transport blet:industry belt origin:Weite brand,Tianjin

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
39
Main frame channel steel: 20# steel
Electric parts:Chint,Zhejiang
Frequency motor、PLC control-or:Teda brand,Taiwan
Bearing:Ha,Wa,Luo Seat bearing:Jinrun,Zhejiang
Automatic upper basket lower Longmen stacking
machine
Function characteristics
1, the upper lift stacker
Five cardboard conveying section, basket type stacking, accurate counting, automatically change the
duo, change orders, neatly stacking;
The first transport section of vacuum adsorption conveying cardboard, four rows of CFRP strip press
paper, neatly superimposed control board;
Frequency conversion motor, inverter control board smooth conveying, the conveying speed
synchronization and paperboard speed;
Crawler type hanging basket stacking platform, AC servo control lifting, stacking smooth, neat;
Stacking reaches a set number of frequency control automatic steady lateral paper;
The front baffle servo control automatic flap board, to ensure the board stacking neat;
The tailgate AC servo positioning control for a single, rapid, accurate adjustment;
The rear baffle plate can be automatically lifting, shifting, implementation of a stack multiple single
stacking, dislocation stacking;
Conveying section on both sides with pedals and a guardrail, convenient operation and cardboard
quality inspection;
Independent seal control cabinet, standard industrial air-conditioning, electrical equipment operating in
dust-free, constant temperature, constant humidity environment;
The standard 10 "color touch screen, convenient field operation monitoring;
Standard communication interface, network and a central monitoring management system, realize the
automatic change orders and order management;
In strict accordance with the CE standard design, through the SGS CE certification.
2, the lower Longmen stacking machine

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
40
Four cardboard conveying section, Longmen type stacking, accurate counting, automatically change the
stack for a single, neatly stacking;
The first transport section of vacuum adsorption conveying cardboard, four rows of CFRP strip press
paper, neatly superimposed control board;
Frequency conversion motor, inverter control board smooth conveying, the conveying speed
synchronization and paperboard speed;
Longmen type stacking, AC servo control lifting, stacking smooth, neat;
Flat belt type stacking platform, stacking reaches a set number of frequency control automatic steady
lateral paper;
The front baffle servo control automatic flap board, to ensure the board stacking neat;
The tailgate AC servo positioning control for a single, rapid, accurate adjustment;
The standard two row of aluminum alloy roll paper receiving frame connected with the paper, not to
hurt the cardboard, convenient and direct turning plate, stacking;
Independent seal control cabinet, standard industrial air-conditioning, electrical equipment operating in
dust-free, constant temperature, constant humidity environment;
The standard 10 "color touch screen, convenient field operation monitoring;
Standard communication interface, network and a central monitoring management system, realize the
automatic change orders and order management;
Technical indicators
Effective width: 1600 mm
Stacking length: the upper 3500 mm, 3000 mm lower
Stacking velocity: 250 meters per minute
The stacking height: 1700 mm, 230 mm lower upper
Specifications
The upper and lower stacking length: 3500mm 3000mm
The stacking height: the upper 1800mm and lower 250mm
Stacking velocity: 250 m / min
Effective width: 1600
Total power: 46kw
Machine
Beam and column uses the high quality steel, channel steel, square pipe, surface sandblast and spray
paint and baking finish;
The conveying roller is made of high quality seamless steel tube, precision machining, dynamic balance
correction, hard chrome plated surface;
Germany CONTITECH strength synchronous belt;
The German HONGSBELT high strength conveying flat belt
The German HONGSBELT high strength conveying belt.
Pneumatic system
Taiwan gold cylinder, solenoid valve, pneumatic valve, pressure regulating valve of pneumatic
components.
Control system

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
41
The conveying section of the conveyor motor: Shanghai Futian frequency conversion motor;
Conveying section conveying control: the French Schneider inverter;
Nacelle platform lifting motor: Shanghai Futian AC servo motor;
Nacelle platform lifting control: the French Schneider AC servo controller;
Longmen lifting motor: Shanghai Futian AC servo motor;
Longmen lifting control: the French Schneider AC servo controller;
Transverse paper conveying motor: Taiwan City precision gear reducer motor;
Transverse paper conveying control: the French Schneider inverter;
After the damper position adjusting motor: Germany Kinco AC servo motor;
After the damper position adjusting control: Germany Kinco AC servo controller;
The front baffle board take Qi motor: Germany Kinco AC servo motor;
The front baffle board take Qi control: Germany Kinco AC servo controller;
Operation monitoring: French Schneider color touch screen;
Detection and control: Schneider PLC of France, Germany paschke proximity switch, photoelectric
switch, encoder;
Low voltage electrical: French Schneider AC contactor, air switch, switch
GF-T Glue making system
Technical Parameter
horizontal agitator：main body barrel volume 1300L 1set
Carrying body barrel volume 500L 1set
Store barrel volume in glue making shop： 1000L 1set
Single facer store barrel volume： 350L 1set
Single facer back- glue barrel volume： 350L 1set
Secondary glue machine store barrel volume： 350L 1set
Secondary glue machine back- glue barrel volume：350L 1set
Electricity：voltage 380V frequency 50Hz current 25A
Machine total power：12.15kw
Characteristic

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
42
* Providing starch adhesive for single facer and gluing machine, etc.
* Horizontal glue making machine can produce main body glue and carrying body glue, and mix and stir, the glue
making quantity is large.
*In glue making shop, glue inside store barrel will be sent to store barrel of every using glue machine, and supply their
glue.
store
*Store barrel, supply glue barrel have stir device, to avoid glue deposit.
* The glue making system are including carrying body barrel, main body barrel, store barrel, and glue supplying pump,
and back- glue pump, etc.
*The glue making system adopts auto-cycling supply glue, extra glue will follow back back-glue barrel. The glue level
will be auto-controlled, the glue inside back-glue barrel will be sent back to store barrel of using glue machine,
cyclically supply glue, to save glue and prevent glue burned and deposited.
*After work finished, the extra glue of each using glue machine will be drawn to store barrel of glue shop by pump, for
next time usage.
* Responsible technical guide and advising adhesive agent formulation
Raw material and bought-in parts
Horizontal agitator：main body barrel engine power 5.5 kw 1set continuous work from Wuxi
Carrying body barrel engine power 1.5kw 1set continuous work from Wuxi
Glue making shop store barrel engine power: 0.75kw 1set continuous work from Wuxi
Main gluing feeding pumps engine power: 2.2kw 2sets not continuous work from Hengshui
Glue making shop and barrels, pipes, etc should be provided by client, the pipe diameter is 2〝zinc galvanized
Bearing: Ha, Wa, Luo
Ball valves, tee, elbow, moving connects, in-side and outside joints are of high qualified products in China
Electric appliances: Chint Zhejiang
GF－T Pneumatic system

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
43
Technical Parameter
Working pressure：0.8-1.0MPa Environment temperature：-5℃----＋50℃
Compressed air output: 0.9/min Store barrel volume:1.5m3
Working electricity: 380V 50Hz
System total power: 7.5kw intermittent work
Characteristic
* To provide compressed air for whole production line, and keep working pressure stable. *Compressed air station
supply compressed air, pressure is stable and quantity is enough.
* The air will be filtered in the station, to keep air clean and stable.
* Each air-using machine will get air through main pipeline, independently control and not affecting with other.
* Each air-using machine will adjust air pressure according to actual requirement, equipped with pressure monitor dial
plate.
* The pipelines with machinery will be made of copper or high quality of PVC pipe, reliable and durable.
* Before the compressed air enter into the air-using machine, second filter and oil-frog treatment will be required, so as
to make sure relative parts normal and safety used.
*Combines pneumatic system and electric control system into one body, operate them together.
Raw material and bought-in parts
Air compressor: 7.5kw
Store barrel materials: 20# steel Ji Steel, thickness: 20mm pressure container is made according to pressure
container safety standard.
Proportional valves, pressure adjustment valves, pressure meter, air 3 set unit, electromagnetic valves, filtering device,
made in Yadeke Taiwan
EF-T Electric control system

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
44
Technical Parameter
Working power：380V 50Hz 300A
Control electricity pressure：220V 50Hz 30A
Characteristic
* Whole production line will be completely controlled, while main line is including single facer group, double facer,
slitter, cutoff.
* The comprehensive usage of pneumatic control, pneumatic control, electric control, to make sure the advance of
whole production line control.
* Each machine are designed to have two systems, independent control and cross point control, can meet the need of
each machine independently works, and of the working together with other machines.
* There is caution system among machines, so as to coordinate the work of each operator.
* Each operation desk can correctly show the working speed of other machine.
*B、C machine and double facer have speed indicating device.
*Regular low voltage electric appliances :Chint,Zhejiang
SP-S Steam system
Technical parameters
Steam consumption: 1.2-1.8t/h
Boiler：2T/h
Boiler pressure：13MPa
Temperature inside pipes: 160－200℃
Steam pressure：0.8－1.3MPa
Single facer enter steam pipe diameter：￠48mm Drainage steam pipe diameter:￠32mm
Pre-heater enter steam pipe diameter：￠48mm Drainage steam pipe diameter￠32mm

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
45
Duplex-heater enter steam pipe diameter：￠48mm Drainage steam pipe diameter￠32mm
Gluing machine enter steam pipe dia.:￠48mm Drainage steam pipe diameter￠32mm
Baker and finalizing enter steam pipe diameter：￠48mm Drainage steam pipe diameter ￠32mm
Characteristic
*Supplying steam for whole production line and steam using machine, keep working temperature stable.
* Each machine has independent small steam system, five section control temperature, save resource, easily adjust.
* Control working temperature can be completed by adjusting steam pressure, and equipped pressure monitoring dial
plate.
* Each drainage water unit has side way to drain air, the machine will become cooling very soon when it stopped.
*Floating ball supply water device, 1/2 metal soft pipe and ball valves connect with side way, plunger valve.
*Pipeline system connects with rotary heating parts by metal soft pipes, so as to expand the usage life of rotary joints.
All steam pipelines are of seamless steel pipes, make sure safety usage under high pressure.
All steam pipelines surface are painted with rusty-preventing paint, brush sliver-power.
Optional machines

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
46
Flexo printing machine with die cutter and slotter

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
47
Auto gluer,stitching,bundling machine
Stitching machine

电话 TEL：（0086）317－7721689 7724853 传真 FAX：（0086）317－7723341
48
Auto gluer machine

Brochure of Dpack

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (8)

Destaque

Destaque (8)

Semelhante a Brochure of Dpack

Semelhante a Brochure of Dpack (20)

Brochure of Dpack