6. Choosing Your Emulsion
Emulsion
Options
Ink Types
Plastisol Silicone Water Based Discharge
Diazo Short Run
Lengths
Dual Cure
Photopolymer Water
Reistant
Short Run
Lengths
Photopolymer
+ Diazo (Dual
or Triple Cure)
7. Coating
• Always degrease mesh.
• Start on the print side and
finish on the squeegee
side.
• Keep the build on the
print side.
• Coat slowly especially on
coarse mesh
8. Correct Drying
35°C, 10% RH
#ScreenPrintingTopTip: Don’t dry screens from the stencil reclaim
area with coated screens.
#ScreenPrintingTopTip: Screens with residual moisture will readlily
absorb water based inks used in DTS and this will impact on the
fine detail that can be achieved.
9. Factors to consider with exposure systems
• Mesh Colour
White Mesh Yellow Meshvs
Faster
CTS
Slower
DTS
11. Summary
• The move to digital stencil making can be made
using your current emulsions and screen making
techniques.
• Deciding which method to go with will be
dependant on your print quality needs and
through put.
12. CPS Ltd
Chemicals Products and Services
www.cps.eu
cps@cps.eu
T: 01235 773240
F: 01235 771196
Tell Us
What
You Think