Owens corning enduragold duct system fiberglass insulation Endura gold , Owens corning fiberglass insulation

1. Commercial & Industrial
OWENS CORNING®
FIBER GLASS
HVAC APPLICATION

2. Commercial & Industrial
2
HVAC APPLICATION
HVAC APPLICATION
Owens Corning EnDuraGoldTM
,Rigi Duct,duct wrap and pipe insulation have been contributing to energy conservation,noise control and
indoor air quality performance of residential and commercial heating,ventilating and air conditioning duct systems for more than 40 years.
Fiber glass insulation in air duct systems can help to save energy, cut heating and cooling costs, and help make the interior
environment comfortable.
Fiber glass insulation inside air ducts absorbs noise--whether it’s traveling along the duct from central air equipment or coming from
nearby rooms. It also soaks up noise caused by expansion, contraction and vibration.
Fiber glass duct insulation can contribute to the quality of the indoor environment too. Properly installed in a well-maintained duct
system, clean, dry Fiber Glass insulation won’t support mold growth or take significant moisture from the air.Tests show that rooms
served by Fiber Glass insulated ducts have no more fibers in the air than are usually found in fresh outdoor air.
The products Owens Corning sells each year are responsible for the prevention of more than 1 billion tons of greenhouse gas
emissions.This equals the annual emissions of 200 million passenger cars or the use of 2 billion barrels of oil.We are committed to
increasing our net positive impact on the planet.
According to a study by the Harvard University School of Public Health, insulating existing homes to current standards would save
800 trillion BTUs each year, which is equal to 76 supertankers of crude oil.
Owens Corning
Owens Corning, headquartered in Toledo, Ohio, U.S.A., is a
world leader in building materials and glass fiber composites.
Founded in 1938, Owens Corning is a US Fortune 500 company
with approximately 19,000 employees in manufacturing,
sales and research facilities in more than 26 countries on six
continents.
Apart from building materials and composite products, Owens
Corning also provides systems and services creating unique
solutions and profitable growth for our customers.
About Owens Corning
Benefits Of Duct Insulations For HVAC
Owens Corning Asia Pacific
In 1994, Owens Corning established its regional headquarters in Hong Kong to launch the development of its business in the
Asia Pacific region. In 2004, the regional headquarters for Owens Corning Asia Pacific Building Materials relocated to Shanghai to
reflect the need to be closer to the growing markets in Asia Pacific, key customers and its largest core of employees in the region.
Today, there are more than 1,200 employees in building materials and composites manufacturing, sales and research operations
throughout the region.The Company has sales and/or distribution channels in every country of the region, including Australia, New
Zealand and India.
As the leader in building material and fiberglass composite area in the world, Owens Corning devotes itself to
bringing the most advanced technology as well as products and systems of the best quality to Asia Pacific.Today,
Owens Corning has 7 plants in China and one plant in South Korea, producing products including Fiberglass
Insulation, Foamular® -Metric,Vinyl Siding, Shingles, Langeo StoneTM
etc.
As the pioneer and leader in the world’s building energy efficiency, Owens Corning provides superior products
and service.What’s more important is that Owens Corning has developed a series of building energy efficiency
system solutions which meet local building codes and practices.

3. 3
Commercial & Industrial
HVAC APPLICATION
HVAC APPLICATION
Using Owens Corning fiber glass duct board 475/800 series as the main material and auxiliary materials
such as pressure / thermal sensitive adhesive tapes,clasp nails,etc.,Owens Corning EnDuraGoldTM
Duct
System able to be made directly at the construction site,is a high-performance heat insulation air duct
system of light weight and great health benefit. Following UL181A standard,the product realizes perfect
combination of thermal and acoustic performance with stable air flow.
Owens Corning EnDuraGoldTM
Duct System allows quick and easy making of square and rectangular
air duct components such as direct duct,bend,reducing duct,boot-shaped duct, T-shaped duct,etc.,and
effective integration of such components into complete air transmission system for heat supply,ventilation,air conditioning purposes in various
types of commercial,industrial and residential buildings.
EnDuraGoldTM
Duct System
· Highly efficient heat insulation and energy conservation
· Sound absorption for a quieter environment
· Anti-bacteria and anti-mildew feature to ensure a healthy environment
· Light weight to reduce load on the building
· Quick making to shorten construction time
Owens Corning 475/800 fiber glass duct board series are the main materials for the EnDuraGoldTM
Duct System. Such board
is produced by using patent centrifugal technology to turn melted glass into fiber and then have it processed and cured with
environmentally-friendly bond that contains thermosetting resin. The exterior of the duct board is covered with special reinforced
overlay of great durability and fireproofness and the interior is coated with durable insulation material. At two ends of the duct board
there are pre-made tongue joints of dual density with Shiplap Joint. There are also special reinforced aluminum foils and insulation
materials available to meet with the needs of adding nails or socket connection for board extention.
Physical Properties
Inside the duct:<121˚C
Outside the duct:<66˚C
25.4 m / s
+/- 500 bar (If >500 bar,special processing required)
<3% at 49 ˚C & 95% relative humidity
Do not encourage the production of mildew (only when the interior is coated with anti-microorganism coating)
No mildew (only when the interior is coated with anti-microorganism coating)
Do not encourage the breeding of epiphyte (only when the interior is coated with anti-microorganism coating)
Do not encourage the breeding of bacteria (only when the interior is coated with anti-microorganism coating)
No fiber falling off
Flame spread:25
Fume production:50
Flame penetration:30 minutes
WorkingTemperature
Max.Wind Speed
Static Pressure Limit
MoistureAbsorption
Anti-Mildew
Anti-Epiphyte
Anti-Bacteria
Fiber Falling Off
Surface Combustibility
Fire Retardance
Performance
UL181
UL181 erosion experiment
UL 181
ASTM C1104
UL 181
GB/T2423.16-1999
ASTM G21
ASTM G22
GB/T 16157
UL 723
ASTM 184
UL 181
Testing Method Technical Requirement
Features & Benefits
Specification (mm)
475
800
Length Width Thickness
25
38
1220
1220
3000
3000

4. Commercial & Industrial
4
HVAC APPLICATION
HVAC APPLICATION
Fiber glass Rigid Duct Insulations are composed of glass fibers bonded together with thermosetting resin.They are manufactured in
various stiffnesses, from flexible to rigid, although the rigid or semi-rigid forms are most suitable for insulating rectangular ductwork.
Unfaced boards may also be used on duct and equipment exteriors, and can be field-jacketed.
These boards are also available withFoil-Scrim-Kraft (FSK) facing for application to the exterior of large ductwork or equipment
where a neat finished appearance and vapor retarder performance are required.
Fiber glass Rigid Duct Insulations are intended for use in commercial, institutional, industrial and residential construction as thermal and
acoustical insulation for the exterior of ductwork and mechanical air-handling equipment and tanks where abuse resistance is required.
The semi-rigid boards, with densities of 48kg/m3, are flexible insulation boards for application over irregularly-shaped surfaces where
board-like properties are desired. The rigid boards, with densities from 56 to 64 kg/m3, are even more rigid for strength, abuse-
resistance and flat appearance.
Rigi Duct
Features & Benefits
Assured Thermal Performance -----When installed in accordance with instructions, so that compression is controlled, fiber glass
Rigid Duct Insulation provides specified thermal performance (see R-value table). Operating costs are controlled due to reduction
of heat loss or gain through sheet metal duct walls.
Enhanced Comfort Control ----- Fiber glass Rigid Duct Insulation helps heating and cooling
systems to deliver conditioned air to occupied spaces at or near design temperatures.By
conserving heating and cooling energy,HVAC systems may operate under reduced load.
·
·
Physical Property
Propert
ASTM C 4111
ASTMC1136
ASTM C665
ASTM C665
ASTMC1104
ASTM E96
PROC.A
ASTMD781
B.S. 476
China
National
Standard
ASTM E84
Test Method Specification
Operating
Temperature Range
Insulation
Jacket Temperature
Corrosiveness
Mold Growth
Moisture Absorption
Vapor Permeance
Puncture Resistance
Density
Flammability
Characteristics
Combustibility
Characteristics
Surface Burning
Characteristics
- 4°C to +121°C
- 29°C to +115°C
Chemically Inert
No Growth
<3% by weight at 49°C; 90% R.H.
0.02 Perm Maximum
35 Beach Units Minimum
48kg/m3
56kg/m3
64kg/m3
Part 4 – Non-Combustible
Part 6 – Fire Propagation
Part 7 – Surface Spread of Flame
Part 12– Ignitability
GB 5464-85: PASSED
Non-Combustible
Flame Spread 25
Smoke Developed 50
Class “O” Fire Rating to the Building Regulations Section E15
Specifications
Thickness
mm
Length
mm
Width
mm
Density
kg/m3
25
40
50
25
40
50
25
40
50
25
40
50
1.2
1.2
1.2
1.2
0.6
0.6
0.6
0.6
40
48
56
64

5. 5
Commercial & Industrial
HVAC APPLICATION
HVAC APPLICATION
Duct Wrap
Features & Benefits
* Mean temperature is the average of two temperatures:the air inside the duct and that of the ambient air outside it.
Physical Property
Propert
ASTM C 411
ASTM C665
ASTM C665
ASTMC1104
ASTM E96
ASTMD781
W/m•K
B.S. 476
China
National
Standard
ASTM E84
Test Method Specification
Operating
Temperature Range
Corrosiveness
Mold Growth
Moisture Absorption
Vapor Permeance
Puncture Resistance
Thermal
Conductivity (k)
At 24°C Mean
Flammability
Characteristics
Combustibility
Characteristics
Surface Burning
Characteristics
- 4°C to +121°C
Chemically Inert
No Growth
<3% by weight at 49°C; 90% R.H.
0.02 Perm Maximum
25 Beach Units Minimum
Type Type Type Type Type
200 240 320 400 480
0.037 0.036 0.034 0.033 0.032
Part 4 – Non-Combustible
Part 6 – Fire Propagation
Part 7 – Surface Spread of Flame
Part 12– Ignitability
GB 5464-85: PASSED
Non-Combustible
Flame Spread 25
Smoke Developed 50
Class “O” Fire Rating to the Building Regulations Section E15
Fiber glass All-Service Duct Wrap insulationis a blanket of glass fibers, factory-
laminated to a Foil-Scrim-Kraft (FSK) vapor retarder facing or other designated foil.
Fiber glass All-Service Duct Wrap insulation is used to insulate commercialand
residential heating, air conditioning and dual-temperature ducts operating at
temperatures from 4°C to 121°C.This insulation, when applied in accordance with
installation instructions, will provide the “Installed R-Value” as published for the
product and printed on the facing, thus assuring specified in-place thermal perfor
mance and condensation control.
Assured Thermal Performance -----When installed in accordance with instructions,so that compression is controlled,fiber glass All-
Service DuctWrap provides specified thermal performance.Operating costs are controlled due to reduction of heat loss or gain through
sheet metal duct walls.
Enhanced Comfort Control ----- Fiber glass All-Service Duct Wrap helps heating and cooling systems to deliver conditioned air
to occupied spaces at or near design temperatures.By conserving heating and cooling energy, HVAC systems may operate under
reduced load.
Flexible, Easy Installation ----- Fiber glass All-Service Duct Wrap is easily cut to fit flat, curved or irregular duct surfaces for a neat,
thermally effective insulation blanket. Because it’s easier to install than rigid boards, installation costs are lowered.
·
·
·
Specifications
Thickness
mm
Length
mm
Density
kg/m3
25
40
50
25
40
50
25
40
50
25
40
50
25
40
50
1.2
1.2
1.2
1.2
1.2
20
24
32
40
48
Product Type
Duct Wra
Type 200
Type 240
Type 320
Type 400
Type 480

6. Commercial & Industrial
6
HVAC APPLICATION
HVAC APPLICATION
Owens Corning pink-colored fiber glass pipe insulation is made of thin
long fiber glass with environmentally adhesive bond through special
processes. It can be applied for heat insulation purposes on various
types of cold and hot pipes and covered or uncovered pipes. The special
fiber glass material contributes to extremely good performances of heat
insulation as well as extrusion and impact resistance.
Owens Corning also provides various moisture-proof overlay materials
and related accessories (such as adhesive tapes) for the fiber glass pipe
insulation according to the current heating and ventilation system design
requirements in China.These products are all OEM processed with
guarantee of smooth overlay surface, able to meet with heat insulation and
moisture resistance needs in various circumstances.
Physical Properties
Pipe Insulation
Testing Method
ASTM C411
GB/T 11835-1998
ASTM C665
ASTM C1104
GB 5480.7 - 87
ASTM E84
B.S. 476
China’s National Standard
GB 5464-1999
Technical Requirement
-18˚C to +454 ˚C
Not lower than 350 ˚C
No chemical reaction
At 49 ˚C & 95% relative humidity
Not above 3% of the total weight
Not above 5% of the total weight
Flame spread: 25; Fume spread: 50
PartVI – Flame Spread
PartVII – Surface Spread of Flame
Note: Level “O” fire regardance standard in Section
E15 of Construction Codes
Grade A Non-combustible material
Working Temperature
Hot Load Reshrinking Temperature
Corrosion Resistance
Performance
Moisture Absorption
Fire Retardance
Specifications
· The packaging is kraft paper box or plastic bag.
· Products of different specifications can be made available upon requirement.
· Please specify the duct diameter, thickness of the duct wall, volume weight, overlay type, etc. when placing purchase orders.
Volume Weight (kg/m3
)
Thickness (mm)
Length (mm)
Diameter (mm)
48 64 80 100
25 30 40 50 60 65 70
1000 1200
16-457

7. 7
Commercial & Industrial
HVAC APPLICATION
HVAC APPLICATION
Classical Cases of HVAC Application
Beijing: Oriental Plaza Beijing: China Bank Headquarter
Shanghai: Shanghai GrandTheater Shanghai: PuDong International Airport
Shanghai: Jin MaoTower Guzhou: CITIC Plaza

8. OWENS CORNING (CHINA) INVESTMENT CO.,LTD
Shanghai Owens Corning office/Block B & C, 4F, Tomson Commercial Building,
710 DongFang Rad,Pudong,Shanghai,China
Tel: (021) 6101-9666 Fax: (021) 6101-9588
http://www.owenscorning.com
Hong Kong
Room 1602, Jubilee Centre,
46 Gloucester Road,
Wanchai, Hong Kong
Fax: (852) 2861-2760
billy.s.lee@owenscorning.com
Korea
15F Hi-living Building, 890-16,
Daechi-dong, Kangnam-ku,
Seoul 135-280, Korea
T e l: (822) 2050-7490
Fax: (822) 2050-7499
Japan
Nissei Toranomon Bldg 4F
3-12-1 Toranomon, Minato-ku
Tokyo 105-0001 JAPAN
T e l: (813) 5733-1676
Fax: (813) 5733-1677
India
701 Alpha Building,
Hiranandani Gardens,
Powai, Mumbai 400 076, India
T e l: (9122) 6668-1722
Fax: (9122) 6668-1701
Pub. No. 8102801; Print in SH 8P Jan 2008