A governor is the component of the steam turbine control system that regulates the rotational speed in response to changing load conditions. The governor output signal manipulates the position of the steam inlet valve or nozzles which in turn regulates the steam flow to the turbine. The governing of the turbine is necessary as a turbine is directly coupled to an electric generator which is required to run at a constant speed under all fluctuating load conditions In a steam turbine, there are three types of governors are used. Throttle Governing of Steam Turbine Nozzle Control Governing Of Steam Turbine Bypass Governing of Steam Turbine. Throttle Governing of steam turbine https://turtleturbines.com/different-types-of-steam-turbine-governor/

1. APPLICATION OF STEAM TURBINES IN TRIGENERATION -HEATING, COOLING AND POWER
Simple Turbines, Superior by Design!
turtleturbines.com
DIFFERENT TYPES OF STEAM
TURBINE GOVERNOR

2. About the Company
Introduction
We believe, a dependable Smart Power Source opens up radical business
avenues for our Customers.
Our Customers benefit immensely by generating their own Onsite
Distributed Power which also keeps our planet Clean.
We craft our Products from First Principles, challenging the old dogmas.
We Build Great Products.
turtleturbines.com

3. turtleturbines.com
A governor is the component of the steam turbine control system that regulates the
rotational speed in response to changing load conditions.
The governor output signal manipulates the position of the steam inlet valve or
nozzles which in turn regulates the steam flow to the turbine.
The governing of the turbine is necessary as a turbine is directly coupled to an electric
generator which is required to run at a constant speed under all fluctuating load
conditions
In a steam turbine, there are three types of governors are used.
Throttle Governing of Steam Turbine
Nozzle Control Governing Of Steam Turbine
Bypass Governing of Steam Turbine.
Throttle Governing of steam turbine
In this governing system, the pressure of the steam turbine is reduced at the Turbine
entry thereby decreasing the availability of energy.
In this method, steam is pass through the restricted passage thereby reducing its
pressure across the governing valve.
The flow rate is control through a partially opened steam turbine control valve.

4. turtleturbines.com
Throttle governing is used for small turbines. Its cost is less and it has a simple
mechanism.
In throttle governing the steam is throttled whenever the load falls below the design
load to maintain turbine speed constant. In this system, a centrifugal governor is
driven from the main shaft of the turbine by belt or gear arrangement.
A control valve is used to control the direction of oil flow.
Nozzle control governing steam turbine
Nozzle control governing of steam turbine is basically used for part-load condition.
Some sets of nozzles are grouped together and each group of the nozzle is supplied
steam controlled by valves.
Bypass governing of steam turbine
The bypass line is provided for passing the steam from the first stage nozzle box into a
later stage where work output increases.
This bypass steam is automatically regulated by the lift of the valve which is under the
control of the speed of the governor for all loads within its range.

5. turtleturbines.com
DIFFERENT TYPES OF STEAM TURBINE GOVERNOR

6. Thank you!
Feel free to approach us
if you have any
questions.
join us :- turtleturbines.com