4. Company
PS_header1_small_blue
PS_header2_small_blue
We deliver “Sensor Intelligence.”
SICK sensor solutions for industrial automation are the result of exceptional dedication
and experience. From development all the way to service: The people at SICK are
committed to investing all their expertise in providing with the very best sensors and
system solutions possible.
A company with a culture of success
Over 5,800 people are on staff, with products and services
available to help SICK sensor technology users increase their
productivity and reduce their costs. Founded in 1946 and
headquartered in Waldkirch, Germany, SICK is a global sensor
specialist with nearly 50 subsidiaries and representations
worldwide.
4
ce m e n t i n d u s t r y | S I C K
Our exemplary corporate culture fosters an optimum worklife balance, thus attracting the best employees from all over
the world. SICK is one of the best employers – we have been
among the winners of the prestigious German “Great Place to
Work” award for many years in succession.
8014937/2012-12
Subject to change without notice
5. PS_header2_small_blue
PS_header1_small_blue
Company
Innovation for the leading edge
A corporate culture for sustainable excellence
SICK sensor systems simplify and optimize processes and allow
for sustainable production. SICK operates at many research
and development centers all over the world. Co-designed with
customers and universities, our innovative sensor products and
solutions are made to give a decisive edge. With an impressive
track record of innovation, we take the key parameters of modern production to new levels: reliable process control, safety of
people and environmental protection.
SICK is backed by a holistic, homogeneous corporate culture.
We are an independent company. And our sensor technology is
open to all system environments. The power of innovation has
made SICK one of the technology and market leaders – sensor
technology that is successful in the long term.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
5
6. Industries
PS_header1_small_blue
PS_header2_small_blue
“Sensor Intelligence.” for all requirements
SICK is a renowned expert in many industries, and is entirely familiar with the critical
challenges they face. While speed, accuracy and availability take center stage in all
industries, technical implementations vary greatly. SICK puts its vast experience to
use to provide with precisely the solution you need.
For applications worldwide
Hundreds of thousands of installations and applications go to
prove that SICK knows the different industries and their processes inside out. This tradition of uncompromising expertise is
ongoing: As we move into the future, we will continue to design,
6
ce m e n t i n d u s t r y | S I C K
implement and optimize customized solutions in our application
centers in Europe, Asia and North America. You can count on
SICK as a reliable supplier and development partner.
8014937/2012-12
Subject to change without notice
7. PS_header2_small_blue
PS_header1_small_blue
Industries
For your specific industry
For performance across the board
With a track record of proven expertise in a great variety of
industries, SICK has taken quality and productivity to new
heights. The automotive, pharmaceutical, electronics and solar
industries are just a few examples of sectors that benefit from
our know-how. In addition to increasing speed and improving
traceability in warehouses and distribution centers, SICK
solutions provide accident protection for automated guided
vehicles. SICK system solutions for analysis and flow measurement of gases and liquids enable environmental protection
and sustainability in, for example, energy production, cement
production or waste incineration plants.
SICK provides the right technology to respond to the tasks
involved in industrial automation: measuring, detecting,
monitoring and controlling, protecting, networking and integrating, identifying, positioning. Our development and industry
experts continually create groundbreaking innovations to solve these tasks.
8014937/2012-12
Subject to change without notice
www.sick.com/industries
ce m e n t i n d u s t r y | S I C K
7
8. SICK LifeTime Services
PS_header1_small_blue
PS_header2_small_blue
For safety and productivity:
SICK LifeTime Services
SICK LifeTime Services is a comprehensive set of high-quality services
provided to support the entire life cycle of products and applications
from plant walk-through all the way to upgrades. These services increase the safety of people, boost the productivity of machines and serve
as the basis for our customers’ sustainable business success.
The benefit of SICK services
Each of our products and solutions is accompanied by a comprehensive range of services tuned precisely to the requirements of the product or solution – along its entire life cycle.
Backed by extensive industry expertise and more than 60 years
8
ce m e n t i n d u s t r y | S I C K
of experience, LifeTime Services stand for maximum availability
and an exceptional service life of our products and solutions.
8014937/2012-12
Subject to change without notice
9. PS_header1_small_blue
SICK LifeTime Services
PS_header2_small_blue
Consulting &
Design
Verification &
Optimization
Training &
Education
••
••
••
••
••
••
••
••
••
••
••
•• User training
•• Seminars
•• WebTraining
Plant walk-through
Risk assessment
Safety concept
Feasibility studies
Software and hardware
design
Inspection
Maintenance
Barcode checks
Accident investigation
Stoptime measurement
Machine safety inspection
Product &
System Support
Upgrade &
Retrofits
••
••
••
••
•• Machine conversion
•• Sensor upgrades
•• Retrofitting of technology
Commissioning
Exchange units and repairs
Remote support
Hotline
www.sick.com/services
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
9
10. PS_header1
3 lines max. the cement industry
Challenges for
Sensor highlights and customized analysis
technology from SICK
The cement sector plays an important role within the building materials industry. Productivity and product quality are the decisive factors on the international stage. The cement industry, with its high
level of energy and raw materials use, is particularly concerned
with conserving natural resources and protecting the global climate.
Cement plants are therefore equipped with the most modern sensors and analyzer systems in order to meet market requirements
for quality and cost efficiency. By providing intelligent solutions,
SICK has proven itself in all areas of cement production – from the
extraction of raw materials to the distribution of the end product.
Emission measurement
Quality control
Service
The cement industry continuously
monitors emission levels in order to
ensure environmentally friendly production. SICK’s analysis technology
provides the process control center
with all required values from the
measured components. These values
can then be further processed in an
emission data acquisition system if
required.
SICK offers an intelligent, rugged
rotary kiln inlet measurement solution for monitoring clinker production.
As when measuring emissions, it is
also important here to reconcile high
measurement availability with low
maintenance cost.
SICK is a single source for a complete range of services – expert
advice, skilled planning services,
detailed project planning and engineering, installation, and commissioning. We also provide reliable
post-sales maintenance and repair
support.
10
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
12. Sensor solutions for the
PS_header1
cement industry
3 lines max.
12
Ce
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
13. The following pages contain example applications
to demonstrate the use of SICK products in different phases of production.
Focus 1
14
Raw materials extraction and
processing
Focus 2a
16
Burning process
Focus 2b
18
Burning process
Focus 2c
20
Burning process
Focus 3a
22
Packaging and logistics
Focus 3b
24
Packaging and logistics
Focus 3c
25
Packaging and logistics
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
13
14. Focus 1:
PS_header1
Raw materials
3 lines max. extraction and processing
1
Conveyor belt supervision and crusher
monitoring
The Bulkscan® LMS511 laser volume flowmeter provides non-contact detection of the
volume flow on conveyor belts, based on the
principle of laser light time-of-flight measurement. The Bulkscan® LMS511 features rug-
control at the crusher or at transfer points.
Integrated loading center of gravity detection
enables maximum transport performance
and the detection of one-sided loads and
one-sided conveyor belt loads. Conveyor belt
control permits the detection of belt slippage,
thus identifying elevated belt wear costs.
◂
ged construction, high reliability, and wearfree operation allows continuous quantity
2
1
Product: Bulkscan® LMS511, see page 48
14
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
15. 3
Process monitoring and precipitator protec- ▸
tion measurement at the preheater
The composition of the exhaust gas at the
outlet of the preheater provides information
about the progression of the burning process, as well as indications of an imminent
risk of explosion for the downstream electrostatic precipitator. To acquire this information, changes in the concentration of the gas
components CO, NO, O2, and, if applicable,
3
SO2, are measured at the preheater. The occurrence of high CO peaks in the exhaust gas
indicates a risk for the downstream electrostatic precipitator. The MAC800 extractive
analyzer system with the GMS800 gas analyzer is suited to this measurement task involving high dust loading, the gas temperatures, and the space limitations. This system
enables reliable process gas monitoring, thus
providing an economical solution for increasing plant efficiency and safety
Product: GMS800, see page 34
is easy to install and can be commissioned
without filling.
These product features make the LBV300
suitable not only for use in raw materials extraction and processing, but also for monitoring the filling level of the finished cement.
◂
Overfill protection for aggregates and
raw meal
Before burning, the raw meal and the aggregates are crushed in a pulverizer. Reliable
monitoring of the filling level is indispensable
for ensuring continuous production. With no
mechanical moving parts, the LBV300 vibrating level switch is highly rugged and is also
immune to deposit formation. In addition, it
2
Product: LBV300, see page 48
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
15
16. Focus 2a:
PS_header1
Burning process
3 lines max.
2
1
sampling probe is suited to handle these process conditions.
Depending on the plant, the measurement
point is located at a suitable point between
the calciner outlet and the preheater outlet.
◂
◂
Optimizing secondary firing in the calciner
In many cement plants, a calciner with secondary firing is interposed between the preheater and the rotary kiln. The CO, NO, O2,
and, if applicable, SO2 gas components in the
kiln exhaust gas are continuously monitored
in order to optimize the operation of the calciner. An MCS300P HW hot-measuring analyzer system with a back-purging gas
1
Product: MCS300P HW, see page 37
16
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
17. 3
3
◂
Product: SIDOR, see page 33
Monitoring the coal bunker
The coal dust used as fuel is stored in bunkers. Coal bunkers present the risk of smoldering fires in which CO can accumulate to
form explosive mixtures with the air. By performing continuous measurement of the CO
concentration, smoldering fires can be identified at an early stage (due to the rise in CO)
and handled in a timely manner. In addition,
smoldering fires. The MKAS Compact analyzer system with an Ex-protected sampling
probe is the ideal solution. The integrated
SIDOR gas analyzer allows the simultaneous
measurement of CO and O2 and can be adjusted using ambient air. This sophisticated
system provides the reliability needed for
safety-related measurements.
◂
Monitoring CO and O2 to protect the coal mill
Coal dust is a commonly used fuel for cement kilns. Inert gas is introduced into the
coal mill to prevent fires. A rise in the O2 concentration indicates a leak and the entry of
air. By performing continuous O2 measurement, leaks can be identified early and handled in a timely manner. If required, CO measurement can be extended to detecting
O2 measurement can be integrated in order
to monitor inert gas. The MKAS Compact analyzer system with an Ex-protected sampling
probe is the ideal solution. The integrated
SIDOR gas analyzer allows the simultaneous
measurement of CO and O2 and can be adjusted using ambient air. The long maintenance intervals reduce operating costs.
2
Product: SIDOR, see page 33
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
17
18. Focus 2b:
PS_header1
Burning process
3 lines max.
1
2
3
and accurately perform non-contact gas velocity measurement, making them especially
suited to optimization. The FLOWSIC100
H-AC model is especially suited for performing measurements under conditions of high
gas temperature and dust concentration. The
low-maintenance FLOWSIC100 devices allow
efficient process regulation even with highly
fluctuating flows.
◂
Flue gas conditioning for performing downstream dedusting
In the cooling tower, the hot exhaust gas from
the heat exchanger is cooled by injecting water if necessary. This protects filter systems
from excessively high gas temperatures and
increases filtering efficiency when using electrostatic precipitators. The devices in SICK’s
FLOWSIC100 product family continuously
1
Product: FLOWSIC100 CEMS, see page 32
18
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
19. and dust concentrations make measurement
more difficult. SICK provides a complete solution with the SCP3000 gas sampling probe
and the MCS300P HW analyzer system.
◂
Monitoring process gases at the rotary kiln
inlet
The quality of the cement clinker is highly dependent on the process conditions in the rotary kiln. Performing gas analysis in the rotary kiln process provides the opportunity to
optimize the kiln firing and the burning process simultaneously. The extreme measurement conditions under high temperatures
2
3
Product: SCP3000, see page 37
8014937/2012-12
Subject to change without notice
Product: MCS300P HW, see page 37
ce m e n t i n d u s t r y | S I C K
19
20. Focus 2c:
PS_header1
Burning process
3 lines max.
1
2
ensure that the limit values are kept and also
provide an indicator of possible leaks or other malfunctions in the filtering equipment.
The DUSTHUNTER SP100 scattered light
measuring device with a single-side mountable measuring probe is especially suited for
fabric filters, while the DUSTHUNTER T200
transmissiometer is suited for electrostatic
precipitators. Both devices have an integrated device monitoring and thus require very
little maintenance.
◂
Monitoring exhaust gas dedusting downstream from the clinker cooler and the coal
mill
Dedusting equipment is used in cement
plants for maintaining compliance with the
regulatory dust limit values in exhaust gas in
accordance with local regulations. Electrostatic precipitators or fabric filters are used
for dedusting. The measurement results
1
Product: DUSTHUNTER S, see page 32
20
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
21. to EN 15267-3 in Europe. With its broad
range of products for performing emissions
monitoring, SICK offers flexible, complete
one-stop solutions. Dust measuring devices in
the DUSTHUNTER product family, in-situ gas
analyzers such as the GM700, and extractive
gas analyzer systems such as the MCS100E
HW and MCS100FT all find application here.
Analyzers for special components, such as the
MERCEM300Z for mercury (Hg), round out the
portfolio of solutions. The FLOWSIC100 CEMS
product family provides volume flow measurement, and the MEAC2000 system performs
data acquisition. The use of extractive or insitu technology provides an ideal way to meet
local measurement requirements.
◂
Measuring exhaust gas emissions
Environmental regulations stipulate that certain pollutants in the exhaust gas emitted by
cement plants, as well as the reference values, must be continuously monitored. The
emissions monitoring regulations vary from
country to country. In many countries, the
emission measurement technology must be
performance-tested, for example, according
2
Product: MCS100FT, see page 34
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
21
22. Focus 3a:
PS_header1
Packing and
3 lines max. logistics
2
1
3
tor the usage of the bags fed from the roll.
◂
Packaging machine (rotary packing
machine)
The bagging equipment is specifically tailored
to the more stringent requirements of cement packaging. SICK sensors handle all
packaging machine detection tasks, from the
packaging material feed system to the finished filled cement bags. Here, the WL12-3
and WL9-3 small photoelectric sensors moni-
1
2
Product: WL12, see page 39
22
ce m e n t i n d u s t r y | S I C K
Product: WL9, see page 40
8014937/2012-12
Subject to change without notice
23. code reader)
◂
Tracking shipments
Reliable classification and tracking: From
identifying individual packages for tracking
the serial number or production line, to identifying palettes in distribution. IDpro stands
for SICK’s expertise in performing automated
identification (1D or 2D codes, transponders)
using laser measurement sensors, cameras,
and RFID. (Image: LECTOR®62x image-based
3
Product: Lector®62x, see page 47
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
23
24. Focus 3b:
PS_header1
Packing and
3 lines max. logistics
1
3
2
correct position for loading by robots. A safety
system ensures personnel protection and process safety. The C4000 Palletizer safety light
curtain ensures intelligent human-material
differentiation at the output of the palletizer
system. Three L27 single-beam photoelectric
safety switches monitor the feed area. The
protective devices must be reset via the reset
pushbutton. ES21 emergency stop pushbuttons complete the protection. The Flexi Soft
safety controller links the signals from the
safety sensors and actuators, thus ensuring
the operation of the safety functions.
◂
Palletizing
Automatic palletizers stack the filled cement
bags onto pallets. The WL27-3 compact photoelectric sensor and the WT14-2 small photoelectric sensor ensure reliable detection in
automatic feed systems. The transport speed
of the cement bags is monitored by the DSF60
incremental encoder. The MPS analog positioning sensor detects the empty pallets in the
1
2
Product: L27, see page 46
24
ce m e n t i n d u s t r y | S I C K
3
Product: MPS, see page 41
Product: ES21, see page 44
8014937/2012-12
Subject to change without notice
25. Focus 3c:
Packing and logistics
5
4
6
entiation is handled at the feed area by the
M4000 Advanced multiple light beam safety
device with a UE403 and four WL280-2 compact photoelectric sensors, and at the output
area by a C4000 Palletizer safety light curtain.
The i10 Lock and i110S electromechanical
safety switches monitor the access door. ES21
emergency stop pushbuttons complete the
protection. An E100 enabling switch is used
for safe setup operation. The Flexi Soft safety
controller links the signals from the safety sensors and actuators, thus ensuring the operation of the safety functions.
◂
Stretch banding machine
After the pallet has reached its position, the
stretch film is secured to the palette and
wrapped using upward and downward movements of the film. SICK’s IQ40, AFM60, and
WL280-2 products handle both the measurement of palette dimensions and the detection
tasks for controlling the wrapping process.
Access protection with human-material differ-
4
5
Product: IQ40, see page 42
8014937/2012-12
Subject to change without notice
6
Product: AFM60, see page 46
Product: i10 Lock, see page 43
ce m e n t i n d u s t r y | S I C K
25
26. Systems and project engineering
PS_header1_small_blue
PS_header2_small_blue
Everything from stand-alone devices to complete analyzer systems
SICK provides application-related system solutions based on an extensive range of products. In addition to standard solutions, SICK also provides customized system solutions for the cement industry.
Ready-to-use analyzer containers
Whether used for emissions or process measurements,
the analyzers should be installed in the immediate vicinity of the measurement points. Analysis containers serve
an important function here by protecting the highly precise measuring systems and signal processing devices
from the harsh ambient conditions at the installation site
in the cement plant.
Custom planning and engineering
Planning and engineering at SICK is combined with decades of experience in of emissions and process monitoring. SICK’s engineers use the latest CAD systems to
plan and design solutions to handle the cement plant
requirements. In doing so, the latest technology in analyzers and sample conditioning is deployed, and the current communications interfaces are used to ensure rapid
data transfer. Systems are designed in accordance with
the applicable international standards, as well as many
national standards. Implemented solutions are extensively and clearly documented. The system documentation thus forms the basis for creating comprehensive
project documentation and for supplying replacement
parts rapidly. Customers have an experienced project
team and a worldwide service organization at their disposal through commissioning and afterwards to ensure
reliable and sustained system operation.
26
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
27. PS_header2_small_blue
SystemsPS_header1_small_blue
and project engineering
Project management according to internationally recognized methods
SICK ensures globally consistent and effective project
management. No matter in what country our customers
award a project contract to SICK, our international project teams provide consistent project results based on
the same high standards of quality. Experienced project
teams support the projects starting with the contract
award and continuing through to acceptance at the construction site. These teams work to adhere to the scheduled project delivery deadlines, organize the system ac-
8014937/2012-12
Subject to change without notice
ceptance in the plant or on-site, and update the project
documentation in consultation with the customer. The
project team remains available even after the conclusion
of the project.
The responsible project team begins supporting complex
projects as early as the bidding phase. This ensures that
all project requirements are correctly understood and
included in the bid.
ce m e n t i n d u s t r y | S I C K
27
28. Product overview
PS_header1_small_blue
PS_header2_small_blue
Versatile product range for industrial automation
From the simple acquisition task to the key sensor technology in a
complex production process: With every product from its broad portfolio, SICK offers a sensor solution that best combines cost effectiveness and safety.
www.sick.com/products
Photoelectric sensors
•• Miniature photoelectric sensors
•• Small photoelectric sensors
•• Compact photoelectric sensors
•• Fiber-optic sensors and fibers
•• Cylindrical photoelectric sensors
•• MultiTask photoelectric sensors
•• Inductive proximity sensors
•• Capacitive proximity sensors
•• Magnetic proximity sensors
•• Analog positioning sensors
•• Sensors for T-slot cylinders
•• Sensors for C-slot cylinders
•• Sensor adapters for other
cylinder types
•• Bar code scanners
•• Image-based code readers
•• Hand-held scanners
•• RFID
Proximity sensors
Magnetic cylinder sensors
Identification solutions
28
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
29. PS_header1_small_blue
Product overview
PS_header2_small_blue
Detection and ranging solutions
•• Laser measurement technology
System solutions
•• Volume measurement systems
•• Code reading systems
•• Dimension weighing scanning
systems
•• Vision systems
•• Level sensors
•• Pressure sensors
•• Flow sensors
•• Temperature sensors
••
••
••
••
•• Array sensors
•• Register sensors
•• Markless sensors
Fluid sensors
Registration sensors
Contrast sensors
Color sensors
Luminescence sensors
Fork sensors
Distance sensors
•• Short range distance sensors
(displacement)
•• Mid range distance sensors
•• Long range distance sensors
•• Linear measurement sensors
8014937/2012-12
Subject to change without notice
••
••
••
••
Ultrasonic sensors
Double sheet detector
Optical data transmission
Position finders
ce m e n t i n d u s t r y | S I C K
29
30. Product overview
PS_header1_small_blue
PS_header2_small_blue
Automation light grids
•• Advanced automation light grids
•• Standard automation light grids
•• Smart light grids
•• Vision sensors
•• Smart cameras
•• 3D cameras
••
••
••
••
•• Single-beam photoelectric safety
switches
•• Mirror and device columns
•• Upgrade kits
Vision
Opto-electronic protective devices
Safety laser scanners
Safety camera systems
Safety light curtains
Multiple light beam safety
devices
Safety switches
•• Electro-mechanical safety
switches
•• Non-contact safety switches
•• Safety command devices
•• Safety relays
•• Safety controllers
•• Network solutions
sens:Control – safe control solutions
30
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
31. PS_header1_small_blue
Product overview
PS_header2_small_blue
Motor feedback systems
•• Interfaces: incremental, HIPERFACE® and HIPERFACE DSL®
•• Safety motor feedback systems
•• Rotary and linear motor feedback systems for asynchronous,
synchronous motors and linear
motors
•• Absolute encoders
•• Incremental encoders
•• Linear encoders
•• Wire draw encoders
•• Gas analyzers
•• Dust measuring devices
•• Analyzer systems
•• Liquid analyzers
•• Data acquisition systems
•• Tunnel sensors
•• Gas flow meters
•• Mass flow meters
•• Volume flow measuring devices
Encoders
Analyzers and systems
Gas flow measuring devices
Software
•• Safexpert® safety software
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
31
32. DUSTHUNTER S | Dust Measuring Devices
FLOWSIC100 CEMS | Gas flow measuring devices
DUSTHUNTER S – At a glance
•• For very low to medium dust concen-
•• Automatic check of zero and refer-
trations
•• For small to large duct diameters
•• Contamination check (not DUST-
ence point
HUNTER B50)
Your benefits
•• Easy installation, commissioning, and
•• Approved according to EN 15267-3
operation
•• Measurement independent of gas
velocity, humidity and particle charge
•• Low maintenance due to self-moni-
(not DUSTHUNTER SB50)
toring
-- www.mysick.com/en/DUSTHUNTER_S
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
FLOWSIC100 CEMS – At a glance
•• Rugged titanium transducers for high
durability
•• Corrosion-resistant material for application in aggressive gases (option)
•• Integral measurement over the duct
diameter with types H, M and S
•• Probe type PR for economic installation from one side of the duct
•• Automatic function control with zero
and span point check
Your benefits
•• Reliable flow measurement for ducts
•• Measurement without pressure
with small up to very large diameters
•• High durability of the device
•• Minimum operating and maintenance
costs
•• Accurate measuring results under
difficult measuring conditions
loss, therefore no influences on the
process
•• User-friendly operation via SOPAS ET
software
•• Reliable function monitoring due to
enhanced diagnosis
-- www.mysick.com/en/FLOWSIC100_CEMS
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
32
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
33. Gas Analyzers | GM700
Gas Analyzers | SIDOR
GM700 – At a glance
•• High selectivity due to high spectral
•• No moving parts: minimal wear and
resolution
•• Short response times
•• No calibration required
•• No gas sampling and conditioning
tear
required
Your benefits
•• Unbiased measuring values due to
in-situ measurement directly in the
process
•• Best application solution using probe
or cross-duct type
•• High reliability during operation
•• Also applicable for harsh environment
conditions
•• Detection of fast and short-term
process fluctuations
-- www.mysick.com/en/GM700
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
SIDOR – At a glance
•• Detector with high long-term stability
•• Paramagnetic or electrochemical O2
measurement
•• Automatic adjustment with component-free ambient air
•• Insensitive to contaminations
Your benefits
•• Automatic adjustment, self-monitoring
•• TÜV approval and ATEX type approval
and fault diagnosis
•• Test gas adjustment only every 6
months
•• Long maintenance intervals
•• Repairable on site
•• Exchange of components without
for measurement of CH4, CO2 and O2
complicated temperature adjustment
in the factory
-- www.mysick.com/en/SIDOR
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
33
34. GMS800 | Gas Analyzers
MCS100FT | Gas Analyzers
GMS800 – At a glance
•• 7 different analyzer modules: DEFOR
(NDUV, UVRAS), FIDOR (FID), MULTOR
(NDIR), OXOR-E (electrochemical O2),
OXOR-P (paramagnetic O2), THERMOR
(TC) and UNOR (NDIR)
•• 4 different types of enclosures
•• Gas module with sample gas pump
and/or control sensors
•• New enclosure type for easy and
quick integration in analyzer cabinets
•• Remote diagnosis via Ethernet with
software SOPAS ET
Your benefits
•• Approved according to EN 15267-3
•• Minimal influence of ambient temper-
and EN 14181
•• Installations in Non-Ex-areas and
Ex-areas (Zone 1 and 2 according to
ATEX) possible
•• Minimum service and maintenance
work as well as easy reconditioning of
existing installations due to modular
design
•• Adjustment without test gases via
optional adjustment unit
ature through thermostatic controlled
modules
•• System solutions with turn-key analyzer cabinets MAC800
•• Reliable measuring results by proven
measurement technology
•• Easy maintenance and repair due to
replacement of complete assemblies
or modules
-- www.mysick.com/en/GMS800
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
MCS100FT – At a glance
•• Lowest approved HF measuring range
of 0 ... 3 mg/m³
•• Automatic spectrum adjustment via
AutoVAL for reliable measuring values
•• Operation via touchscreen
•• Sample gas transport by an ejector
without moving parts
•• Approved according to EN 15267-3
•• Remote control and diagnosis via
software SOPAS ET
•• Automatic adjustment, backflushing
and filter cleaning
Your benefits
•• Proper HF limit value monitoring
•• Only one analyzer for more than 10
measuring components
•• Easy integration into the customer
network environment
•• Long maintenance interval of 6
months for most components
•• Type approved measurement of
greenhouse gases such as N2O, CH4
and CO2
•• Low maintenance requirements
-- www.mysick.com/en/MCS100FT
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
34
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
35. Gas Analyzers | MERCEM300Z
Analyzer systems | MAC800
MERCEM300Z – At a glance
•• Accurate measurement of “total mercury” directly in a thermal converter
(patented)
•• Measuring operation without using
consumables
•• Very low maintenance gas sampling
using an ejector pump – no moving
parts
•• Integrated adjustment cell for automatic drift correction
•• Automatic adjustment of the entire
measuring system with a built-in test
gas generator (optional)
•• Modular design with the entire
system
Your benefits
•• Reliable results of the actual measuring values of elemental Hg and Hg
compounds in gases
•• Very low operating expenses
•• Minimum maintenance expenditure
•• Long-term stability minimizes technician time requirements due to selfadjusting measuring system
•• Measuring certainty using the fully
automated adjustment with test gas
•• Convenient and fast access for easy
service and user-friendly remote
diagnosis
-- www.mysick.com/en/MERCEM300Z
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
MAC800 – At a glance
•• Cold-extractive analyzer system certified according to EN 15267-3
•• Plug-and-play analyzer modules with
24 V power supply
•• Operating unit for displaying all measured values and status information
on a touch screen
•• External sensors via interfaces connectable
•• Display and control of external sensors is possible
•• Remote control of the complete
system via Ethernet, Modbus or additional GPRS modem
Your benefits
•• Cost-effective investment because of
•• Easy service due to clear separation
easy modifications for future needs
•• Easy commissioning and trouble-free
on-site approval of the automatic
measuring system (AMS) by the relevant authorities
•• Full overview via touchscreen and
integration of remote sensors (p, T,
volume flow, dust)
of the electrical and the analytical
sections
•• High availability through easy and fast
change of modules
•• Ethernet or Modbus connection to
networks
-- www.mysick.com/en/MAC800
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
35
36. MKAS systems | Analyzer systems
MCS100E systems | Analyzer systems
MKAS systems – At a glance
•• Up to 3 S710 or SIDOR analyzers or
•• Can be upgraded with optional com-
NOx-converter
•• Includes the major system components
•• Wired and tested – ready for use
ponents
Your benefits
•• Due to modular concept adaptable to
•• Fulfills the requirements for an auto-
the measuring task
•• Proven system components offer a
reliable solution
matic measuring system according to
EU standards
•• Reduced response times due to
sample gas bypass
-- www.mysick.com/en/MKAS_systems
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
MCS100E systems – At a glance
•• Extractive measurement of up to 8
IR-active gas compounds
•• Additional oxygen and total hydrocarbon analyzers as an option
•• Test gas supply at the gas sampling
probe or at the analyzer
•• Back-purging of gas sampling probe
for cleaning of filters
•• Fast sample gas exchange for
minimizing adsorption and desorption
effects
•• Automated sample point switching
Your benefits
•• Measurement of several gas compo-
•• QAL3 drift test according to EN
nents with one analyzer
•• Heated gas paths enables measurement of difficult gases like HCl and
NH3
•• Long maintenance intervals (typically
3 months) due to self monitoring of
the analyzer
14181 with internal calibration filter
wheel – no test gas required
•• Especially low measurement ranges
for SO2, NO, NO2 possible
-- www.mysick.com/en/MCS100E_systems
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
36
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
37. Analyzer systems | MCS300P HW
Analyzer systems | SCP3000
MCS300P HW – At a glance
•• Simultaneous measurement of up to
6 components plus O2
•• Sample flow control and sample gas
pressure measurement
•• Temperature of heated system components up to 220 °C
•• Automatic sample point switching for
up to 8 sample points (option)
•• Automatic adjustment of zero and
span point
•• Integrated adjustment unit without
span gas (option)
•• Extended operation via PC and
software
•• Flexible I/O modules
Your benefits
•• Economic, automatic adjustment
without expensive test gases
•• Easy remote control by integration in
existing networks
•• Automatic control of the complete
measuring system and probe
•• Low maintenance and reliable due to
hot measurement
•• In combination with probe SCP3000
also for measurements at high dust
loads and high temperatures
-- www.mysick.com/en/MCS300P_HW
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
SCP3000 – At a glance
•• For gas temperatures up to 1400 °C
•• For very high dust loads up to 2000
g/m³
•• Effective shock blower prevents
blockage on probe inlet
•• Rotating unit prevents backing of
deposits on probe surface
•• Self-test functions to protect components against power, coolant or
compressed air malfunction
•• Pneumatic or electric retraction of
the probe in case of power, coolant or
compressed air malfunction
Your benefits
•• Minimum installation requirements
due to modular design
•• Reduced maintenance costs: up to
100 hours per year due to automatic
purging and cleaning of probe and
filter
•• Automatic monitoring and remote
control functions of the complete
system via PLC
•• Comfortable touch screen with intuitive menus for easy use
•• High operational availability and functional reliability due to anti-stick and
back-purging system
•• Secure operation due to self-test
functions and emergency retraction
of the probe
•• Approved system for harsh process
conditions
-- www.mysick.com/en/SCP3000
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
37
38. MEAC2000 | Data Acquisition Systems
W280-2 | Compact photoelectric sensors
MEAC2000 – At a glance
•• Evaluation according to EU directives
2000/76/EC and 2001/80/EC
•• Evaluation according to 13., 17., 27.
and 30. FICA and TA -Luft (Technical.
Instructions on Air Quality Control)
•• Inclusion of operational parameters
and plant conditions
•• Visualization of emission and operational data
•• Remote data transfer, remote diagnosis and remote control
•• Alarm signals when exceeding the
limit values
Your benefits
•• Software monitors all communications with connected field devices
and control systems
•• All values are stored on hard disk,
thus it is possible to look at data history even after many years
•• A routine back-up is made regularly
on a second hard disk
•• Screen displays and output of actual
and historical data are freely configurable
-- www.mysick.com/en/MEAC2000
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
W280-2 – At a glance
•• highly visible red light spot thanks to
•• AC/DC devices are compliant with
the Bright Light LED
•• Light/dark switching (DC devices only)
•• Rotatable connector, cable connection or terminal chamber
•• Versions for 10 – 30 V DC or 24 –
240 V DC/AC voltage supply
EN61000-6-3 (electromagnetic interference for “residential, commercial
and light-industrial environments”)
•• Stainless steel mounting bracket and
P250 reflector (for WL280 only) are
included in delivery
•• UL recognized
Your benefits
•• Visible red light of the Bright Light
•• All necessary mounting and operating
LED for simpler alignment of the
sensors
•• DC variants with light/dark switching
ensure application flexibility, reducing
the number of devices required for an
application
•• Rotatable connector provides flexibility for space-restricted installations
accessories are included in delivery,
enabling quick and easy setup: since
mounting bracket (stainless steel
1.4301) and reflector with the WL280
are included in delivery scope
•• DC devices and AC/DC devices available in the same housing, allowing
electrical flexibility
-- www.mysick.com/en/W280-2
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
38
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
39. Small photoelectric sensors | W12-3
Small photoelectric sensors | W14-2
W12-3 – At a glance
•• Best-in-class optical performance due
•• Rugged die-cast zinc housing, op-
to superior OES technology
•• Autocollimation with retro-reflective
sensors
•• Background and foreground suppression with second emitter LED on
proximity sensors
•• Highly visible, precise light spot and
high-energy IR transmitters
tional with Teflon® coating
•• Connection via cable or rotatable
connector
•• Mounting options with through holes,
base blind holes, oblong through
holes and dovetail
•• IO-Link communication available
(optional)
Your benefits
•• Reliable detection due to superior
IP
69K
•• Wide range of products enclosed in
ASIC (application-specific integrated
circuit) technology and immunity to
optical interference factors from the
industrial environment
•• PinPoint LED technology provides a
bright, small and precise light spot
that enables quick and easy sensor
alignment
•• Precise switching characteristics ensure reliable object detection, reducing downtime caused by re-adjusting
sensors during recipe changes
-- www.mysick.com/en/W12-3
a rugged metal housing enables application flexibility in a broad range of
industrial environments
•• Remote diagnostics and maintenance
using IO-Link reduces overall downtime (optional)
•• Flexible mounting options reduce
installation time
•• Easy installation using SICK accessories
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
W14-2 – At a glance
•• Outstanding background suppression
with OES3 technology
•• Highly visible and precise light spot
due to PinPoint LED in selected
products
•• Slim, durable plastic housing
•• Complete sensor family with proximity, retro-reflective and through-beam
variants
Your benefits
•• Reliable object detection at a costeffective price
•• PinPoint LED technology provides a
highly visible red light that enables
quick and easy setup
•• Broad product range gives users a variety of choices to fit their application
•• Rugged plastic housing in a slim
design simplifies installation
•• Quick and easy installation using
SICK accessories saves time
Class 2
C
®
US
LISTED 87LL
-- www.mysick.com/en/W14-2
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
39
40. W9-3 | Small photoelectric sensors
W27-3 Reflex Array | Compact photoelectric sensors
W9-3 – At a glance
•• High-performance sensor in ultra-
•• Two emitter LEDs for best-in-class
rugged VISTAL™ housing
•• PinPoint LED for highly visible and
precise light spot
•• Variable mounting with M3 or M4
background suppression
hole pattern
•• Wide range of connection options
Your benefits
•• Robustness with the VISTAL™ housing
•• Best in class performance
•• Wide variance in connection, mouting
and optic
-- www.mysick.com/en/W9-3
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
W27-3 Reflex Array – At a glance
•• Minimum Detectable Object > 10 mm
•• Minimum distance between sensor
with a 40 mm detection area for the
standard resolution variant
•• Sensing range from 0 up to max. 3.5
m
•• Intensive red light for easy alignment
•• CTA automatically adjusts the switch-
and reflector 0.5 m
ing threshold as contamination occurs over time
Your benefits
•• Reliable detection regardless of
•• PinPoint technology and optical align-
target position within the array: detection height 50 mm (MDO: > 12 mm)
or detection height 24 mm (MDO: >
5 mm)
•• Less installation effort compared to
light grids or multiple single-point
photoelectric sensors
ment procedure enables simple and
quick commissioning
•• Continuous Threshold Adjustment
(CTA) ensures less downtime
-- www.mysick.com/en/W27-3_Reflex_Array
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
40
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
41. Miniature photoelectric sensors | G6
Analog positioning sensors | MPS
G6 - At a glance
•• PinPoint LED for a bright, precise light
spot
•• Durable metal threaded inserts
•• SICK ASIC technology - the result of
decades of experience in photoelectric sensors
•• Large, user-friendly potentiometer
•• Large, bright indicator LEDs
•• IP 67 enclosure rating
Your benefits
•• Easy alignment and precise object
detection due to a highly visible
PinPoint LED
•• Quick and easy mounting and high
durability due to threaded metal
inserts
•• SICK ASIC technology provides high
performance and excellent reliability
•• Easy to adjust due to large, userfriendly potentiometers
•• Easy to monitor due to large, bright
indicator LEDs
•• Easy installation with SICK accessories
-- www.mysick.com/en/G6
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
MPS - At a glance
•• Magnetic position sensor for pneu-
•• Superior precision: 0.05 mm resolu-
matic and hydraulic cylinders with
T-slot
•• Output signal: analog, 4 – 20 mA current and 0 -10 V (in one sensor)
tion, 0.1 mm repeatability, 0.3 mm
linearity, 1 ms measurement rate
•• Electric setting of zero point and end
point via teach-in button (optional)
•• Various lengths available from 32 256 mm
Your benefits
•• Maximum flexibility with several dif-
•• Efficient measurement of stroke due
ferent measuring ranges from 32 to
256 mm
•• Easy analog output setup: adjustable
zero and end point can be taught via
single button
•• Drop-in T-slot mounting from above
makes assembly easy
•• Selectable installation direction to
optimize cabeling
to minimal blind zones, increasing
machine throughput
•• Simple commissioning due to “inrange” indicator
•• Output signal: analog, 4 – 20 mA
current and 0 -10 V (in one sensor)
reduces inventory cost by part number reduction
-- www.mysick.com/en/MPS
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
41
42. IM Standard | Inductive proximity sensors
IQ Standard | Inductive proximity sensors
IM Standard – At a glance
•• Precise operating distances due to
ASIC technology
•• Extra tough thanks to high fastener
torque and hot melt adhesive filling
•• M8 to M30 sizes available
•• Operating distance from 1.5 mm to
20 mm
•• IP 67 enclosure rating
•• Operating temperature from -25° C
to +70° C
•• DC, AC and AC/DC versions available
•• Customer-specific models available
Your benefits
•• Reduced machine downtime
•• Reduced mechanical damage
•• Fewer maintenance costs due to
•• High resistance to shock and vibrations
longer service life
-- www.mysick.com/en/IM_Standard
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
IQ Standard – At a glance
•• Long sensing distance up to 60 mm
•• DC, AC and AC/DC versions available
•• Wide range of housing and mounting
options
•• Variety of connection options including terminal, cable (flying leads) and
connector types
•• Customer-specific models and value
add options are available
Your benefits
•• Increased machine throughput with
less machine downtime
•• Maintenance cost reduction and
reduced mechanical damage due to
long sensing range
Class 2
C
®
US
LISTED 87LL
42
ce m e n t i n d u s t r y | S I C K
•• Reduced maintenance cost due to
longer service life
•• Time-saving quick and easy installation
-- www.mysick.com/en/IQ_Standard
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
43. Safety controllers | Flexi Soft
Electro-mechanical safety switches | i10 Lock
Flexi Soft – At a glance
•• Modularly expandable (12 ... 144
inputs/outputs)
•• Intuitive configuration software: easy
operation, simulation mode, wiring
diagrams, freely downloadable
•• Configuration memory in the system
plug
•• Safely link up to four Flexi Soft safety
controllers via EFI
•• Integration into all common fieldbus
systems
•• Enhanced sensor functionalities via
EFI interface
•• 38 TÜV certified function blocks
Your benefits
•• Prevention of redundant inputs and
•• Standard RS-232 diagnosis via the
outputs saves money
•• Fast commissioning via a system
plug that saves and stores system
configurations
•• Less downtimes due to gateways,
e.g., PROFInet I/O, PROFIBUS-DP,
EtherCAT, CANopen, Modbus TCP,
Ethernet (TCP/IP)
main module enables real-time
diagnostics for quick commissioning,
faster troubleshooting and reduced
downtime
•• Simulation mode allows a user to
verify the safety functions before
installation
•• Fast hardware selection by drag and
drop from a list of simple to understand element icons
-- www.mysick.com/en/Flexi_Soft
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
i10 Lock – At a glance
•• Narrow plastic housing
•• Rigid or mobile actuators
•• 3 M20 x 1.5 cable entry glands
•• Locked by spring force and magnetic
force
•• Lock and door monitoring
•• IP 67 enclosure rating
Your benefits
•• Small design simplifies installation
•• Practical, simple adjustment due to
and makes it easy to mount directly
on the guard door frame
•• Flexible electrical connectivity due to
three cable entry glands
•• Improved diagnostics due to additional signaling contacts
various actuators that are suitable for
any door
•• Different switching elements offer
the appropriate solution for electrical
installation
-- www.mysick.com/en/i10_Lock
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
43
44. ES21 | Safety command devices
E100 | Safety command devices
ES21 – At a glance
•• Either as surface-mounted version
•• Surface-mounted version for direct
with housing or as built-in version (Ø
22 mm)
•• Built-in version for machine control
panels with self-monitoring contacts
between the pushbutton and switching element
mounting on different machines and
systems
•• Rotational or key unlocking
•• Variants with LED ring lighting
•• Available with protective collar to
prevent inadvertent actuation
Your benefits
•• Increased safety due to self-monitor-
•• User-friendly status indicator identi-
ing contacts
•• Reduction in accidental faults due to
variants with a protective collar
fied by a colored mark or LED ring
around the pushbutton simplifies
diagnostics
•• Successful down to the last detail:
award-winning and appealing design
-- www.mysick.com/en/ES21
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
E100 – At a glance
•• Plastic housing with connected cable
•• 3-stage functional structure (off-onoff)
•• Slow-action switching elements with
four contacts
•• Variant with additional plus/minus
buttons
•• Complies to the standard IEC/EN
60947-5-8
Your benefits
•• Personal protection with enabling
switches: increased safety in setup
mode when protective devices are
deactivated
•• Plus/minus buttons for additional
control of direction of movement
•• Different cable lengths available to
meet customer application requirements
-- www.mysick.com/en/E100
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
44
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
45. Safety light curtains | C4000 Palletizer
Multiple light beam safety devices | M4000 Advanced
C4000 Palletizer – At a glance
•• Type 4 (IEC 61496), PL e (EN ISO
13849)
•• Self-teaching, dynamic blanking
detects goods and pallets
•• Direction recognition
•• Multiple sampling
•• Reduced resolution
•• Muting alternative
•• Beam coding
•• Object gap suppression
Your benefits
•• Cost-effective: No additional muting
•• The assorted feasibility of pallets
sensors or protective measures are
required.
•• A compact sensor pair reduces the
mounting requirements considerably
– additional muting sensors are not
required
•• With the dynamic and self-teaching
blanking function, the system can reliably differentiate between people and
material – this provides maximum
safety
allows the passage of mesh boxes,
Euro pallets and half pallets, increasing plant availability
•• Saves storage space: pallets can be
parked permanently in the protective
field
•• One system monitors several conveyor belts, reducing sensor costs
•• Quick commissioning: Euro pallets,
mesh boxes etc. are detected without
any programming
-- www.mysick.com/en/C4000_Palletizer
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
M4000 Advanced – At a glance
•• Type 4 (IEC 61496), PL e (EN ISO
•• External device monitoring (EDM),
13849)
•• Robust housing with three mounting
grooves
•• 7-segment display
•• Wide scanning range, up to 70 m
restart interlock (RES), application diagnostic output (ADO), SDL interface
•• Muting in combination with the
UE403 switching amplifier
•• Laser alignment aid and LED optional
integrated
•• Configuration and diagnostics via PC
Your benefits
•• The wide scanning range allows the
•• Customer-friendly interfaces and
device to be customized according to
the application
•• Robust design with a high level of
resistance to environmental changes
ensures high machine availability,
even under special ambient conditions
•• Mounting grooves on three housing
sides ensure more mounting flexibility
and simplify machine integration
status display simplify commissioning
and maintenance
•• For 2- and 4-sensor muting, the onsite connection of the muting signals
significantly minimizes wiring costs
and simplifies commissioning and
maintenance
•• Reduced downtime due to 360°
visible LED, diagnostics displays and
configuration memory in the UE403
switching amplifier
-- www.mysick.com/en/M4000_Advanced
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
45
46. L27 | Single-beam photoelectric safety switch
AFS/AFM60 SSI | Absolute encoders
L27 – At a glance
•• Type 2 (IEC 61496), PL c (EN ISO
13849), only in conjunction with suitable testing device, e.g. Flexi Classic,
DeviceNet Safety
•• Compact size with ranges up to 35 m
•• Integrated heating
•• Enclosure rating IP 67
•• Temperature range from –40 °C ... +
55 °C
Your benefits
•• Easy integration due to small, com-
•• Flexible device integration makes it
pact versions with maximum range
•• Directly connect to a safety controller
– without a separate evaluation unit,
reducing costs
possible to set up individual protective fields
•• Well suited to withstand extreme
ambient conditions such as heat, cold
or moisture
-- www.mysick.com/en/L27
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
AFS/AFM60 SSI – At a glance
•• High-resolution absolute encoders
with up to 30 bits (AFM60) or up to
18 bits (AFS60)
•• Face mount flange, servo flange, blind
or through hollow shaft
•• SSI, SSI + Incremental or SSI + Sin/
Cos interface
•• Programmable resolution and offset
(dependent on type)
•• Connection system: M12, M23 connector or cable outlet
•• Enclosure rating: IP 67 (housing), IP
65 (shaft)
•• Operating temperature: –30 °C to
+100 °C (depends on type)
Your benefits
•• Programmability of the encoders
•• Suitable for applications with limited
means less storage, greater machine
availability and easy installation
•• Precise positioning due to high resolutions
•• Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
space requirements (extremely short
installation depth of 30 mm)
•• Very good rotation accuracy due to
increased bearing distance
•• One programming tool and software
with automatic encoder detection for
AFS60/AFM60/DFS60
-- www.mysick.com/en/AFS_AFM60_SSI
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
46
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
47. Incremental encoders | DFS60
Image-based code readers ||LECTOR®62x
Image-based code readers LECTOR®62x
DFS60 – At a glance
•• Compact installation depth
•• High resolution up to 16 bits
•• Optionally programmable: Output volt-
•• Electrical interfaces: 5V & 24V TTL/
age, zero pulse position, zero pulse
width and number of pulses
•• Connection: Radial or axial cable
outlet, M23 or M12 connector, axial
or radial
servo flange, blind or through hollow
shaft
•• Remote zero set possible
RS-422, 24 V HTL/push pull
•• Mechanical interfaces: face mount or
Your benefits
•• Reduced storage costs and downtime
•• Permanent and safe operation due to
due to customer-specific programming
•• Variety of different mechanical and
electrical interfaces enable the
encoder to be optimally adjusted to fit
the installation situation
•• Excellent concentricity even at high
speeds
•• High resolution of up to 16 bits ensures precise measurements
a high enclosure rating, temperature
resistance and a long bearing lifetime
•• Programmability via the PGT-08 programming software and the PGT-10-S
display programming tool allow the
encoder to be adapted flexibly and
quickly according to customer needs
•• Programmable zero pulse position
simplifies installation
-- www.mysick.com/en/DFS60
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
LECTOR®62x – At a glance
•• Decoding of most popular code types:
1D, 2D, direct part marking
•• Easy integration with industrial networks: serial, USB, several fieldbus
technologies
•• Auto setup with function buttons,
aiming laser, focus adjustment and
green feedback LED – for quick setup
without PC
•• Compact design and industrial housing
•• Analysis tools include live image
capturing, code verification and read
rate view
Your benefits
•• Intelligent decoding algorithms pro-
•• Compact design and flexible interface
vide reliable reading performance for
improved read rates and throughput
•• IDpro facilitates integration with most
popular industrial networks
•• Intuitive setup with function buttons, auto setup, aiming laser, focus
adjustment and green feedback LED
reduces training and installation time
and costs
connections make it easy to install in
reduced spaces
•• Quick analysis of read rate performance and code quality allows for
efficient control
•• Cloning back-up systems ensure low
machine downtime in the event of
unexpected incidents
•• SICK LifeTime Services give you
peace of mind
-- www.mysick.com/en/LECTOR62x
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
47
48. LBV300 | Level sensors
Bulkscan LMS511 | Flow sensors
LBV300 – At a glance
•• Tough device design
•• Several housing materials and electrical outputs available
•• Immune to deposit formation
•• Commissioning without filling
•• Process temperature up to 250 °C
•• Very high repeatability
•• ATEX versions (1D/2D/1G/2G) available
•• Tube-extended version (LBV330) up
to 6 m and rope extensions version
(LBV320) up to 80 m available for
vertical mounting
Your benefits
•• Easy installation and commissioning,
•• Testing in place possible – no mount-
no calibration necessary
•• Easy operation and integration, saves
time
•• Maintenance-free sensor, reduces
downtime
ing required, which reduces installation time
•• Flexible and tough system for a multitude of applications
•• Solutions for vertically mounted
switches in difficult installation conditions and surroundings
-- www.mysick.com/en/LBV300
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
Bulkscan LMS511 – At a glance
•• Non-contact measurment of volume
and mass flow of bulk material
•• Laser pulses with high angular
resolution ensure outstanding image
resolution
•• 5-echo pulse evaluation produces
highly reliable measurements
•• Offers non-contact belt monitoring
•• Integrated center-of-gravity calculator
•• Robust structure for harsh ambient
conditions
•• Can also measure at low temperatures thanks to integrated heater
•• Compact housing with enclosure rating IP67
Your benefits
•• Maximizes conveyor throughput
•• Reduces maintenance costs by preventing belt slippage
•• Increases the conveyor belt’s service
life
•• Reduces loading time
•• Increases efficiency by optimizing belt
capacity
•• Simple installation
•• Low maintenance costs
•• Offers savings through minimized
energy consumption
-- www.mysick.com/en/Bulkscan_LMS511
For more information, just enter the link and get direct access to technical data, CAD design models, operating instructions, software, application examples and much more.
48
ce m e n t i n d u s t r y | S I C K
8014937/2012-12
Subject to change without notice
50. Connectivity –
PS_header1_small_blue
Always well-connected with SICK
PS_header2_small_blue
Current data via standardized communication
SICK’s products have a standardized data communications system for digital controllers to ensure
that all data, measured values, and parameters are available at all times and can be conveniently
visualized and processed. Moreover, this is available across systems from the customer’s system
network. Data can thus be processed further in the internal computer system at any time.
Signals, interfaces and protocols
• Analog and digital signals
• Interfaces:
• Serial interfaces such as RS-232/RS-485/RS-422
• Ethernet network
• OPC
• Protocols
• Modbus or Modbus TCP
Data acquisition and processing systems
OPC
Ethernet
Modbus
Ethernet/RS-485
I/O
analog, digital
Analyzers and Systems
Operation
Analyzers and systems are operated:
• Directly from the analyzer’s operating unit
• Via a controller, enabling visualization and configuration for numerous analyzers
• Remotely via Ethernet or a mobile network
• With SOPAS ET, SICK’s visualization and configuration
Software
Remote diagnostics
Remote access to the devices and systems is also possible online using analog telephone, cell phone, or Ethernet network connections via SICK’s RDU remote diagnostics unit.
Customer benefits:
• Rapid assistance in the event of malfunction
• Efficient solution: remote diagnostics allow reduction
of on-site service calls
• Optimized and targeted service calls: if on-site service
is required, the technician has already developed the
required solution via remote diagnostics
50
ce m e n t i n d u s t r y | S I C K
TCP/IP
Internet
Plant
Measuring point/device network
8014937/2012-12
Subject to change without notice
51. PS_header1_small_blue
Connectivity –
Always well-connected with SICK
PS_header2_small_blue
Operational management level
Ethernet
Measuring systems
Dust
Operational monitoring
OPC Server
Volume flow
ERP system,
plant management system
Control unit
Reference parameters
Temperature, pressure
Ethernet
Gas components
In-situ gas analysis
Extractive gas analysis
Data acquisition system
Analysis systems
Ethernet
Remote diagnostics,
remote maintenance
Remote diagnostics
Optional
8014937/2012-12
Subject to change without notice
ce m e n t i n d u s t r y | S I C K
51
59. PS_header1_small_blue
Services
PS_header2_small_blue
www.mysick.com – search online and order
Search online quickly and safely – with the SICK “Finders”
Efficiency – with the e-commerce tools from SICK
Product
Applications
Literature
Service
Connection diagram
Accessories
Spare part
Software
Product Finder: We can help you to quickly target the
product that best matches your application.
Applications Finder: Select the application description
on the basis of the challenge posed, industrial sector, or
product group.
Literature Finder: Go directly to the operating instructions,
technical information, and other literature on all aspects
of SICK products.
Find out prices and availability: Determine the price and
possible delivery date of your desired product simply and
quickly at any time.
Request or view a quote: You can have a quote generated online here. Every quote is confirmed to you via
e-mail.
Order online: You can go through the ordering process in
just a few steps.
For safety and productivity: SICK LifeTime Services
SICK LifeTime Services is a comprehensive set of high-quality services provided to support the entire life cycle of products and applications from system design all the way to upgrades. These services increase the safety of people, boost
the productivity of machines and serve as the basis for our customers’ sustainable business success.
Consulting & Design
Globally available experts for cost-effective
solutions
T
FI
H
TRA
OR T
C
EC
K
RET
R
O
8014937/2012-12
Subject to change without notice
Product & System Support
Fast and reliable, by telephone or on location
PP
SICK
LifeTime
Services
SU
IN
C O N S U LT
Verification & Optimization
Checks and recommendations for increased
availability
Upgrade & Retrofits
Uncovers new potential for machines and
systems
Training & Education
Employee qualification for increased
competitiveness
ce m e n t i n d u s t r y | S I C K
59
60. 8014937/2012-12 ∙ JPF ∙ Pre USmod int39
SICK at a glance
Leading technologies
Unique product range
Comprehensive services
With a staff of more than 5,800 and
nearly 50 subsidiaries and representations worldwide, SICK is one of the
leading and most successful manufacturers of sensor technology. The power
of innovation and solution competency
have made SICK the global market
leader. No matter what the project and
industry may be, talking with an expert
from SICK will provide you with an ideal
basis for your plans – there is no need
to settle for anything less than the best.
•• Non-contact detecting, counting,
classifying, positioning and measuring of any type of object or media
•• Accident and operator protection
with sensors, safety software and
services
•• Automatic identification with bar
code and RFID readers
•• Laser measurement technology for
detecting the volume, position and
contour of people and objects
•• Complete system solutions for analysis and flow measurement of gases
and liquids
•• SICK LifeTime Services – for safety
and productivity
•• Application centers in Europe, Asia
and North America for the development of system solutions under realworld conditions
•• E-Business Partner Portal
www.mysick.com – price and availability of products, requests for quotation
and online orders
Worldwide presence with
subsidiaries in the following
countries:
México
Nederland
Norge
Österreich
Polska
România
Russia
Schweiz
Singapore
Slovenija
South Africa
South Korea
Suomi
Sverige
Taiwan
Türkiye
United Arab Emirates
USA
Please find detailed addresses and
additional representatives and agencies
in all major industrial nations at
www.sick.com
Australia
Belgium/Luxembourg
Brasil
Ceská Republika
Canada
China
Danmark
Deutschland
España
France
Great Britain
India
Israel
Italia
Japan
SICK AG | Waldkirch | Germany | www.sick.com