1. LightDuty Floor& Wall Coatings
Flowcoat LXP
Flowcoat LXP is a high performance, seamless, flexible, solvent free polyurethane floor coating.
FlowcoatLXPmay be usedas a flexible coloured floorcoatinginareasona varietyof substratessuchas
concrete,wood,metal andasphalt.
Benefits:
Flexible
Abrasionresistant
Improved impactresistance
Solventfree; low odour
Attractive, lightreflectant appearance
Seamlessand hygienicfinish
Low maintenance
Slipresistant finishmaybe tailoredto specificclient requirements
Water Permiability:
Karsten Test Nil (Impermiable)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Tensile Strength:
> 10N/mm2 (BS6319)
Flowseal EPW (Floor Sealer)
PW is a pigmented, water-based, epoxy floor sealer with a satin finish.
Flowseal EPWissuitable foruse infoodprocessareas,kitchens,lightindustrial areas,storeroomsand
areas of pedestrianandlighttraffic.
Benefits:
Hygienic
Vapourpermeable; allowssubstrateto breath

2. Canbe appliedto dampsubstratessuch as green concrete
Enhancesappearance of workingenvironment
Solventfree; Low odour
Easy to clean andmaintain
Tolerantupto 60°C
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Surface Hardness:
KoenigHardness test 182 secs.
Flowseal EPW (Wall Sealer)
Flowseal EPW is a pigmented, water-based epoxy, hygienic wall sealer with a satin finish.
Flowseal EPWissuitable forsealingwallsinavarietyof locationssuchascleanroomsandhospitals.
Benefits:
Hygienic
Vapourpermeable; allowssubstrateto breath
Canbe appliedto dampsubstrates
Enhancesappearance of workingenvironment
Solventfree; low odour
Easy to clean andmaintain
Temperature Resistace:
Tolerantupto 60°C
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowseal WB
Flowseal WB is a two component, aliphatic, UV stable, pigmented, water-based polyurethane floor sealer.
Typicallyusedasa UV stable,clearor pigmentedsealcoatappliedtoconcrete,screedsorepoxyresin
systems.

3. Benefits:
UV resistant- nonyellowing
Goodabrasionresistance
Hard-wearing
Low VOC
Low odour
Easy to apply
Easy to clean andmaintain
Surface Hardness:
KoenigHardness Test 182 Secs.
Temperature Resistace:
Tolerantupto 65°C
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete. >
1.5MPa
Flowseal WBSatin
Flowseal WB Satin is a two component, aliphatic, UV stable pigmented water-based polyurethane floor sealer with
satin finish.
Typicallyusedasa UV stable,clearor pigmentedsealcoatappliedtoconcrete,screedsorepoxyresin
systems.
Benefits:
UV resistant- nonyellowing
Goodabrasionresistant
Hard-wearing
Low VOC
Low odour
Easy to apply
Easy to clean andmaintain
SnapshotTechnical Profile:

4. Slip Resistance:
TRRL PendulumSlipTest
Dry > 40
Wet dependsonspecification
Surface Hardness:
KoenigHardness Test 182 Secs.
Temperature Resistace:
Tolerantupto 65°C
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Technical Zone:
Lightto MediumDuty HighBuildFloorFinishes
FlowcoatCR
Flowcoat CR is a high performance, solvent free, high chemical resistant epoxy resin coating. Different grades of slip
resistance can be achieved by the inclusion of graded aggregate between coats.
FlowcoatCR maybe usedas a hard-wearingcoloured floorcoatinginareassuchas processing,
manufacturing,packaging,testingandwarehousessubjectedtochemical spillages.
Benefits:
High chemical resistance
Hard-wearing
Abrasionresistant
Solventfree; low odour
Attractive, brightensup dull factories and warehouses
Seamlessand hygienicfinish
Low maintenance
Slipresistant finishcanbe tailoredto specificclientrequirements
Widerange of colours
SnapshotTechnical Profile:
Abrasion Resistance:

5. Taber Abrader:
80 mg lossper1000 cycles
(1 kg loadusingCS10 wheels)
Bond Strength:
Greaterthan cohesive strengthof 25 N/mm2
concrete.>1.5
MPa.
Slip Resistance:
TRRL Pendulum Slip Test
Dry > 40
Wet dependsonspecification
Thermal Resistance:
Tolerantupto 60°C
FlowcoatSK
Flowcoat SK is a two pack, solvent free, high build epoxy resin based coating with excellent resistance to hydraulic
fluids and Skydrol®. Available as a smooth or slip resistant finish.
FlowcoatSKis typicallyusedtoprovide aneasytoclean,chemical resistant floorcoating.A non-slip
finishcanbe producedbyincorporationof aggregatesbetweencoats.Typical usesare aircrafthangers,
aircraft parkingareasand workshops.
Benefits:
Resistant to typical chemicalsfoundinaircraft hangarssuchas Skydrol®,jet fuel,hydraulicfluidsand
engine oil
Non-slipfinishcanbetailoredto requirements
High build,upto 0.25mm in one coat
Seamlessand hygienicfinish
Excellent chemical resistanceto sugarsandacids
Easy to clean andsterilise,low maintenancerequirement
Attractive, lightreflectant appearance
High abrasionresistance
Solventfree; low odour
SnapshotTechnical Profile:
Slip Resistance:

6. TRRL PendulumSlipTest
Dry > 40
Wet dependsonspecification
Abrasion Resistance:
Taber Abrader
80mg lossper1000 cycles
(1kg loadusingCS10 wheels)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Compressive Strength:
> 60N/mm2
(BS6319)
FlowcoatSF41
Flowcoat SF41 is a high performance, solvent free, chemical resistant, high-build epoxy resin coating system.
Different grades of slip resistance may be achieved by inclusion of graded aggregate between coats.
FlowcoatSF41 may be usedas a hard-wearingcolouredfloorcoatinginareassuch as factories,
warehouses,storerooms,plantrooms,lightproductionandprocessareas.
Benefits:
Chemical resistant
Hard-wearing
Abrasionresistant
Solventfree andlow odour
Attractive, lightreflectant appearance
Seamlessand hygienicfinish
Low maintenance
May be appliedat differentsystem thicknesses
Slipresistant finishcanbe tailored
SnapshotTechnical Profile:
Slip Resistance:
TRRL PendulumSlipTest
Dry > 40
Wet dependsonspecification

7. Abrasion Resistance:
Taber Abrader
80mg lossper1000 cycles
(1kg loadusingCS10 wheels)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Compressive Strength:
> 60N/mm2
(BS6319)
FlowcoatHS
Flowcoat HS is a solvent free, durable, high performance epoxy resin coating system.
FlowcoatHS maybe usedas a hard wearingcolouredfloorcoatinginareassuchas factories,
warehouses,plantsandstorerooms.
Benefits:
Goodchemical resistant
Hard wearing
Abrasionresistant
Solventfree, lowodour
Aestheticallyattractive - brightensup dull factoriesandwarehouses
Seamlessand hygienicfinish
Low maintenance
SnapshotTechnical Profile:
Fire Resistance:
BS476-7 Surface Spreadof flame:Class1
Thermal Resistance:
Tolerantupto 60°C
Compressive Strength:
>60 N/mm2
(BS6319)
Tensile Strength:

8. 15 N/mm2 (BS6319)
Medum to Heavy Duty Self-Smoothing Flooring Finishes
Flowshield SL
Flowshield SL is a high-gloss, self-smoothing epoxy resin floor finish generally applied at 2-3mm thickness.
Typicallyusedindryprocessareaswhere the floorissubjectedtofoot,trolley,pallettruckandrubber
wheeledforklifttraffic.Typical usesinclude laboratories,cleanrooms,warehousesandstorage areasin
pharmaceutical,electronic,aerospace,automotiveandprintingplants.
Benefits:
Attractive; enhances workingenvironment
Hygienicand easy to clean
Non-taintingandnon-dusting
Hard-wearing
Abrasion resistant
High chemical resistancegrade available
SnapshotTechnical Profile:
Toxicity:
Taintfree to sensitivefoodstuffs.
Slip Resistance:
Methoddescribedin BS
7976-2
Dry 67 (typical valuesfor4-S
rubberslider)
Compressive Strength:
>60 N/mm2
(BS6319)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield SL 1000
Flowshield SL 1000 is a self-smoothing epoxy resin floor finish applied at 1mm thickness.
Typical usesof Flowshield SL1000 are dry processareaswhere the floorissubjectedtofoot,trolley,
pallettruckand rubberwheeledforklifttraffic.Typical usesinclude laboratories,cleanrooms,
warehousesandstorage areasinpharmaceutical,electronic,aerospace,automotive andprintingplants.

9. Benefits:
Attractive; enhances workingenvironment
Solventfree; low odour
Hygienicand easy to clean
Non-tainting,non-dusting
Hard-wearingfloorfinish
Abrasionresistant
Antistaticgrade available
High chemical resistancegrade available
SnapshotTechnical Profile:
Abrasion Resistance:
Taber Abrader
90mg lossper1000 cycles
(1kg loadusingCS17 wheels)
Slip Resistance:
Methoddescribedin BS
7976-2
Dry 67 (typical valuesfor4-S
rubberslider)
Compressive Strength:
>60 N/mm2
(BS6319)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield CR
Flowshield CR is a high chemical resistance, self-smoothing epoxy resin flooring system.
Ideal foruse in drychemical processareaswhere the flooris subjectedtochemical spillage,mediumto
heavy-dutyfoot,trolley,pallettruckandrubberwheeledforklifttraffic.Typical usesinclude
laboratories,chemical storages,warehouses,andelectronic,aerospace,automotiveandprintingplants.
Benefits:
High chemical resistance
Attractive; enhances workingenvironment
Hygienicand easy to clean

10. Non-tainting;non-dusting
Hard-wearing
Abrasionresistant
Antistaticgrade available
SnapshotTechnical Profile:
Slip Resistance:
Methoddescribedin BS
7976-2
Dry 67
(Typical valuesfor4-Srubber
slider)
Flexural Strength:
>40 N/mm2
(BS6319)
Tensile Strength:
>25 N/mm2
(BS6319)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield CR1000
Flowshield CR 1000 is a high chemical resistant, self-smoothing epoxy resin floor finish applied at 1mm.
Typical usesinclude laboratories,cleanrooms,warehousesandelectronic,aerospace,automotive and
printingplants.Alsousedfordrychemical processareaswhere the floorissubjectedtochemical
spillage andmedium-dutyfoot,trolley,pallettruckandrubberwheeledforklifttraffic.
Benefits:
High chemical resistance
Attractive; enhances workingenvironment
Hygienicand easy to clean
Non-tainting,non-dusting
Hard-wearing
Abrasionresistant
Antistaticgrade available
SnapshotTechnical Profile:

11. Slip Resistance:
Methoddescribedin BS
7976-2
Dry 67
(Typical valuesfor4-Srubber
slider)
Flexural Strength:
>40 N/mm2
(BS6319)
Tensile Strength:
>25 N/mm2
(BS6319)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield SK
Flowshield SK is a solvent free, epoxy self-smoothing flooring system applied at 2-3 mm thickness in a range of
colours with excellent resistance to Skydrol® and hydraulic fluids.
Typical usesare aircraft hangers,aircraftparkingareas,workshopsandareassubjectedtointensive
heavywheeledtraffic.
Benefits:
Resistant to contaminantsinhangarssuchas Skydrol®,jet fuel & engine oil
Goodchemical resistance
Seamlessfloorfinish
Easy to clean andsterilise,low maintenancerequirement
Attractive; lightreflectant appearance
High abrasionresistance
Solventfree; low odour
Fast return to service
SnapshotTechnical Profile:
Abrasion Resistance:
Taber Abrader
90mg lossper1000 cycles
(1kg loadusingCS17 wheels)

12. Temperature Resistance:
Tolerantupto 60°C
Vapour Permiability:
4 gms/ m2
/ mm / 24 hours
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield SK 1000
Flowshield SK 1000 is a solvent free, epoxy self-smoothing flooring system applied at 1 mm thickness with excellent
resistance to Skydrol® and hydraulic fluids.
Typical usesare aircraft hangers,aircraft
parkingareasand workshops.
Benefits:
Resistant to contaminantsinhangarssuch
as Skydrol®,jet fuel & engineoil
Excellent chemical resistance
Seamlessfinish
Hygienicand easy to clean
Attractive; highglossfinish
High abrasionresistance
Solventfree; low odour
SnapshotTechnical Profile:
Abrasion Resistance:
Taber Abrader
90mg lossper1000 cycles
(1kg loadusingCS17 wheels)
Slip Resistance:
TRRL PendulumTest Dry 67
Compressive Strength:
>60 N/mm2
(BS6319)

13. Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield LXP
Flowshield LXP is a two pack, solvent free, flexible polyurethane topping applied at 1.5 mm thickness.
Typicallyusedoverasphalt,wood,steel andconcrete floorstoprovide aflexible,easytoclean,chemical
resistantfloortopping.Typical usesare process,manufacturingandpackagingareassubjectedtoheavy
footand pallettrucktraffic.
Benefits:
Seamlessfinish
Excellent chemical resistanceto sugarsandacids
Easy to clean andmaintain.
Flexible;can be used over asphalt,woodand steel
High abrasionresistance
Solventfree; low odour
Snapshot Technical Profile:
Slip Resistance:
TRRL PendulumSlipTest
Dry >40
Wet dependsonspecification
Temperature Resistance:
Tolerantupto 60°C
Water Permiability:
Karsten Test Nil (Impermiable)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield PU
Flowshield PU is a pigmented 2mm self-smoothing chemical resistant polyurethane resin floor finish.
Ideal forareas requiringchemicalresistance,longtermdurabilityandimpactresistance.Typical uses
include vehicle workshops,engineeringfactoriesandgarages.

14. Benefits:
Goodchemical resistance
Easy to clean andsterilise
Non-tainting,non-dusting
High abrasionresistance
Low odour duringapplication
Fast return to service
UV lightstablegrade is available
SnapshotTechnical Profile:
Abrasion Resistance:
Taber Abrader
0.1g lossper1000 cycles
(1kg loadusingCS17 wheels)
Temperature Resistance:
-5°C up to 60°C
Water Permiability:
Karsten Test Nil (Impermiable)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield Quartz
Flowshield Quartz is a decorative, hard-wearing, self-smoothing "liquid-vinyl" epoxy resin flooring system.
Typical usesinclude dry,lightindustrial,commercialandinstitutionalfloorsrequiringadecorative but
durable industrial floorperformance.Typical usesinclude laboratories,showrooms,retailoutlets,
hospitals,healthcare centres,schoolsandoffices.
Benefits:
Highlydecorative; enhancesworking environment
Solventfree
Excellent scratch resistance
Hygienicand easy to clean

15. Non-taintingandnon-dusting
Hard-wearing
Abrasionresistant
High chemical resistance
Decorative finishinsingleapplication
SnapshotTechnical Profile:
Abrasion Resistance:
Taber Abrader
90mg lossper1000 cycles
(1kg loadusingCS17 wheels)
Temperature Resistance:
Tolerantupto 60°C
Water Permiability:
Karsten Test Nil (Impermiable)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowshield LXP HD
Flowshield LXP HD is a three pack, solvent free, flexible polyurethane topping applied between 2mm and 3mm
thickness.
For use overasphalt,wood,steel andconcrete;toprovide aflexible,easyto clean,chemicallyresistant
floortopping.Typical usesare process,manufacturing,packagingandwarehousingareassubjectedto
heavyfootand pallettrucktrafficandwhere a degree of flexingof the floorisexpected.
Benefits:
Seamlessfinish(except forunderlyingslabjoints)
Excellent chemical resistanceto sugarsandacids.
Easy to clean andsterilise,low maintenancerequirement.
Flexible,canbe usedover asphalt,woodandsteel.
High abrasionresistance.
Solventfree; low odour.
SnapshotTechnical Profile:

16. Slip Resistance:
Methoddescribedin BS
7976-2
Dry >40
(Typical valuesfor4-Srubber
slider)
Temperature Resistance:
Tolerantupto 60°C
Water Permiability:
Karsten Test Nil (Impermiable)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Medium to Heavy Duty Trowel Applied Flooring
Flowtex PT
Flowtex PT is a 4-6mm thick power trowelled heavy duty underlayment for a variety of chemical resistant and hard-
wearing floor finishes.
Flowtex PTmaybe usedas a heavyduty,underlaymentfora varietyof chemical resistantandhard-
wearingfloortoppingsinwetanddryindustrial,commercial andinstitutional environmentssubjected
to hightraffic,impactand chemical spills.
Benefits:
High chemical resistance
Solventfree; low odour
Minimizesundulation
Excellent impactresistance
Seamless,hygienicfinish
Power trowel applicationproducesdense,flat screed finish
SnapshotTechnical Profile:
Impact Resistance:
ISO6272
1kg weight>1.8m
2kg weight>1.5m
Temperature Resistance:

17. Tolerantof temperaturesupto60°C
Compressive Strength:
>50 N/mm2
(BS6319)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowtex HT
Flowtex HT is a 4-8mm thick hand trowelled heavy duty epoxy underlayment for a variety of chemical resistant and
hard-wearing floor finishes.
Flowtex HTmay be usedas a heavyduty,underlaymentforavarietyof chemical resistantandhard-
wearingfloortoppings inwetanddryindustrial,commercial andinstitutional environmentssubjected
to hightraffic,impactand chemical spills.
Benefits:
High chemical resistance
Solventfree; low odour
Minimizesundulation
Excellent impactresistance
Seamless,hygienicfinish
Produces extremely smoothscreed
SnapshotTechnical Profile:
Impact Resistance:
ISO6272
1kg weight>1.8m
2kg weight>1.5m
Temperature Resistance:
Tolerantof temperaturesupto60°C
Compressive Strength:
>50 N/mm2
(BS6319)
Bond Strength:

18. Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flowtex TQ
Flowtex TQ is a hard-wearing, decorative epoxy resin floor topping made up of colour stable quartz granules
encapsulated in a clear resin binder.
Ideal foruse in wetanddry process areas where the floorissubjecttoheavytraffic,impactand
chemical spills.
Benefits:
Decorative floorfinish
High scratch resistance
Easy to clean andmaintain
Excellent abrasionandimpactresistance
Seamless,hygienicfinish
High chemical resistance
SnapshotTechnical Profile:
Impact Resistance:
EN ISO6272
1kg weight>1.8m
2kg weight>1.5m
Temperature Resistance:
Tolerantof sustainedtemperaturesupto60°C
Compressive Strength:
>60 N/mm2
(BS6319)
Bond Strength:
Greaterthan cohesive strength of 25N/mm2
concrete.>
1.5MPa
Flowtex F1 CovingMortar
A 3 component pack, solvent free, epoxy resin based coving mortar.
Usedto form covedskirtings,FlowtexF1CovingMortar can be feathereddowntoaminimumthickness
of 1 mm.
Peran STB

19. Peran STB is a hard-wearing, decorative epoxy resin floor topping made up of colour stable quartz granules
encapsulated in a clear resin binder.
PeranSTB is ideal foruse inwetand dryprocessareas where the floorissubjecttoheavytraffic,impact
and chemical spills.
Benefits:
Decorative floorfinish
High scratch resistance
Easy to clean andmaintain
Excellent abrasionandimpactresistance
Seamless,hygienicfinish
High chemical resistance
SnapshotTechnical Profile:
Impact Resistance:
EN ISO6272
1kg weight>1.8m
2kg weight>1.5m
Temperature Resistance:
Tolerantof sustainedtemperaturesupto60°C
Compressive Strength:
>60 N/mm2
(BS6319)
Bond Strength:
Greaterthan cohesive strengthof 25N/mm2
concrete.>
1.5MPa
Flooring Services
Creating the ideal industrial floor begins with intelligent design. So RCR has its own flooring services
division, with proven expertise in designing industrial floors for major clients.
Our industry-leading consultants take account of everything, including:
 the site, ground conditions and environment;
 how the building will be used over its lifetime;
 load bearing requirements;
 special features, such as docking areas or machinery pits;

20.  safety and hygiene;
 light reflectivity;
 time constraints;
 lifetime costs;
 environmental impact;
 any specific client requirements.
Flooring Products
Industrial flooring products have alwaysbeen at the heart of the RCR Group.
Our portfolio includes everything an industrial floor could require at every stage of its construction:
 armoured joints – to protect construction joint arrises
 formwork – to provide a boundary for the concrete pour
 construction joint sealants – to fill saw-cut joints in concrete floors
 resin coatings – for a decorative, smooth and durable finish
 floor hardeners – to improve durability in hardworking applications
 dry-shake toppings – for colour and durability; and abrasion and slip resistance.
 decorative finishes – to enhance appearance and style
 bonding agents – used when forming a floor in multiple strata
 steel fibres – adding strength to concrete
 accelerating additives – to speed up the curing time and increase early strength
 curing and sealing compounds – to speed curing and improve hardness and durability
 cleaning solvents and detergents – to maintain appearance and performance