2. Table of Contents
Who We Are 01
Casing Heads 02
Casing Spools 03
Tubing Spools 04
Threaded Tubing Heads 05
Multibowl Wellhead System 06
Bottom Hole Test Adapters 07
Tubing Head Adapters 08
Secondary Seals 09
Casing Hangers 10
Tubing Hangers 11
Studded Crosses and Tees 12
Gate Valves 13
Slab Gate Valves 14
Expanding Gate Valves 15
Consumables 16

3. Who we are
Apache Pressure Products is a leading
distributor of oilfield and industrial equipment.
Our line of API 6A wellhead equipment is made
to the highest quality standards and has been
field tested time and time again. Our sales
specialists will assist you on your purchase
whether you are looking for just one gate valve
or an entire multi-bowl system with custom
design elements and modifications.
Apache Pressure Products utilizes a network of
qualified manufacturers, all whom must
complete a quality audit process with
satisfactory rating to be considered. We also
conduct an annual quality inspection of each
supplier to ensure that the level of quality is
maintained.
We leverage two decades worth of contracting
manufacturing experience in the selection and
qualification of our vendors. Our onsite
representatives are on call and ready at any given time to inspect and monitor manufacturing and testing of
our products. When the products arrive in the US they are further scrutinized for material and workmanship
defects at our quality control center. We ensure that every piece of equipment meets and surpasses all
specification requirements.
At our Manvel warehouse we keep an extensive stock of wellhead equipment as well as vast selections of
valves and fittings for all of your drilling and production needs. Please give us a call today and see what we can
offer you. Our mission is to provide unsurpassed value to our customers through constant improvement
and innovation.

4. C-22/29 Casing Heads
Apache Casing heads have a straight bore
bowl design with 45 landing shoulders which
prevents damage to sealing areas by drilling
tools and eliminates bowl protector wedging
issues when pressure is applied.
Ordering Options
Overview
Outlets
Line Pipe Outlets
Side Studded Outlets
Lock Screws
BP pins (2) are supplied upon request
Bottom Connections
Slip-on-weld
Slip-on-weld + O’ring
Threaded
Sure Lock
API 6A specifications
PSL 1, PSL 2 (on request), PR 1, DD
Casing Size
Top
Flange
Working
Pressure (psi)
A B C
Weight
(lbs)
2,000 17.25 8.00 10.88 340
3,000 17.25 8.00 10.88 460
5,000 17.50 8.00 10.88 710
2,000 17.25 9.00 10.88 320
3,000 17.25 9.00 10.88 430
5,000 17.50 9.00 10.88 680
2,000 17.25 10.00 10.88 300
3,000 17.25 10.00 10.88 410
5,000 17.50 10.00 10.88 560
2,000 17.50 11.00 13.50 469
3,000 17.50 11.00 13.50 587
5,000 17.50 11.00 13.50 -
3,000 17.50 11.00 16.62 -
5,000 18.00 11.00 16.62 -
2,000 17.50 12.56 13.50 380
3,000 17.50 12.56 13.50 500
5,000 17.50 12.56 13.50 750
3,000 17.50 12.56 16.62 -
5,000 18.00 12.56 16.62 -
2,000 17.50 15.37 16.62 980
3,000 17.50 15.37 16.62 995
5,000 18.00 15.37 16.62 -
21-1/4" 2,000 19.00 19.12 20.12 1210
20-3/4" 3,000 19.00 19.12 20.12 1331
16-3/4"
20"
13-5/8"
16-3/4"
13-3/8"
13-5/8"
16-3/4"
16"
11-3/4"
8-5/8" 11"
9-5/8" 11"
10-3/4" 11"

5. Apache C-22 Casing Spools have a straight bore
bowl design with 45 landing shoulders. Bottom
prep can be standard PE/BG, “OO” bottom (below
5,000 psi applications) or double “P” seal bottom.
C-29 Casing Spools are based on the same design
as the C-22 with a larger bowl. Which permits the
acceptance of the C-29 Casing Hanger with larger
load capacity.
Ordering Options
Outlets
Line Pipe Outlets
Side Studded Outlets
API 6A specifications
PSL 1, PSL 2, PR 1, DD
A B C
2,000 23.12 10.00 10.88 570
3,000 23.12 10.00 10.88 600
3,000 23.12 10.00 10.88 710
5,000 26.25 10.00 10.88 -
5,000 26.25 10.00 10.88 -
10,000 31.25 10.00 10.88 -
2,000 23.12 10.00 10.88 -
3,000 23.12 10.00 10.88 740
2,000 23.12 12.50 13.50 -
3,000 23.12 12.50 13.50 -
3,000 26.25 10.00 10.88 785
5,000 26.25 10.00 10.88 1175
3,000 26.75 12.50 13.50 -
5,000 26.75 12.50 13.50 -
5,000 29.38 10.00 10.88 1595
10,000 30.25 10.00 10.88 1948
5,000 30.25 12.50 13.50 -
10,000 30.25 12.50 13.50 -
11" 10,000 30.88 10.00 10.88 2950
13-5/8" 10,000 32.62 12.50 13.50 3900
2,000 23.12 10.00 10.88 -
3,000 23.12 10.00 10.88 -
2,000 23.12 12.50 13.50 -
3,000 23.12 12.50 13.50 -
3,000 23.12 10.00 10.88 1200
5,000 24.12 10.00 10.88 1518
3,000 24.12 12.50 13.50 1725
5,000 25.00 12.50 13.50 1950
5,000 30.50 10.00 10.88 -
10,000 29.75 10.00 10.88 3235
5,000 29.75 12.50 13.50 -
10,000 30.50 12.50 13.50 3243
13-5/8" 10,000 32.62 12.50 13.50 -
16-3/4" 10,000 33.00 15.37 16.62 -
2,000 25.25 12.50 13.50 -
3,000 25.25 12.50 13.50 2063.00
2,000 25.25 15.37 16.62 -
3,000 25.25 15.37 16.62 -
3,000 25.25 12.50 13.50 1960
5,000 27.00 12.50 13.50 2450.00
20-3/4" 3,000 27.00 19.12 20.12 -
21-1/4" 5,000 29.25 19.12 20.12 -
5,000 27.00 12.50 13.50 -
10,000 29.25 12.50 13.50 -
5,000 30.75 15.37 16.62 -
10,000 32.25 15.37 16.62 -
20-3/4" 3,000
13-5/8"
21-1/4" 5,000
13-5/8"
16-3/4"
13-5/8"
10,000
21-1/4" 2,000
13-5/8"
16-3/4"
10,000
16-3/4"
2,000
11"
13-5/8"
3,000
11"
13-5/8"
5,000
11"
2,000
11"
13-5/8"
13-5/8"
11"
13-5/8"
11"
13-5/8"
3,000
5,000
Dimensions (inch)
Weight (lbs)
11"
2,000 11"
3,000 11"
5,000 11"
Bottom Flange (wp in psi) Top Flange (wp in psi)
Overview
Casing Spool
Lock Screws
BP pins (2) are supplied upon request
Bottom Prep
PE/BG Bottom
“OO” Bottom
Dobule “P” Seal Bottom

6. Tubing Spools
Outlets
Line Pipe Outlets
Side Studded Outlets
Lock Screws
BP pins are included
Bottom Prep
PE/BG bottom
HPE bottom
API 6A specifications
PSL 1 or PSL 2, PR 1, DD-NL
Apache Tubing Spools have a straight bore bowl design with
45 landing shoulders which prevents damage to sealing areas
by drilling tools and eliminates bowl protector wedging issues
when pressure is applied. Accepts all TC style tubing hangers,
can be converted from single to multiple completions.
Overview
Ordering Options
A B C
2,000 7-1/16“ 3,000 23.12 6.76 7.00 550
3,000 23.12 6.76 7.00 600
5,000 26.25 6.76 7.00 670
3,000 26.25 8.25 8.75 750
5,000 26.25 8.25 8.75 800
5,000 26.25 6.76 7.00 880
10,000 31.25 6.76 7.00 856
9” 10,000 31.25 8.25 8.75 1249
10,000 32.62 6.76 7.00 1318
15,000 33.25 6.76 7.00 -
9“ 10,000 32.62 8.25 8.75 1700
7-1/16” 3,000 23.12 6.76 7.00 445
9“ 3,000 23.12 8.25 8.75 655
3,000 26.25 6.76 7.00 670
5,000 26.25 6.76 7.00 805
3,000 26.25 8.25 8.75 705
5,000 26.75 8.25 8.75 715
5,000 11” 10,000 30.25 10.00 10.88 1754
10,000
7-1/16”
13-5/8"
2,000
3,000
7-1/16”
9“
Bottom Flange (wp in psi) Top Flange (wp in psi)
Dimensions (inch) Weight
(lbs)
11"
3,000
7-1/16”
9“
5,000
7-1/16“

7. Apache Threaded Tubing Heads has a TCM top and
threaded bottom connection.
All Tubing Heads are supplied with 4 BP Lock pins and
comes with 2” LP outlets.
Tubing Heads are supplied up to 5,000 psi.
Overview
A B C
3,000 4 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 103
3,000 5 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 101
5,000 4 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 108
5,000 5 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 104
Wt (lbs)
7 1/16"
Bottom Outlet
Dimensions (inches)
Flange (w orking pressure in psi)
Threaded Tubing Heads

8. Multibowl Wellhead System
The multi-bowl system allows the support of multiple casing strings therefore reducing installation time.
Our multi-bowl well head system is configurable according to your specifications. Apache's multi-bowl
system can significantly reduce your operational cost and improve safety at the same time.
Overview
Casing Spool
Straightbore design casing spool
incorporates two sets of ET style lockpins.
Supplied with two Side-Studded Outlets
Packoff Support Bushing
Pack-off support busing lands on the
mandrel hanger and suspend the
intermediate casing string.
Casing Hanger
Multi-bowl system utilizes a
fluted mandrel casing hanger to
allow cement returns.
Tubing Hanger
Mulit-bowl system uses traditional
TCM Tubing Hangers. Tubing hanger
lands on the packoff support bushing.
Lockdown pins from the upper casing
spool locks the tubing hangers in place.
Casing Head
Apache Multibowl casing head uses a
straight-bore desgin with 45 landing
shoulders. Casing heads are supplied
with eight lockpins to support the
packoff bushing.
o

9. Flange Size Bore A B C Lift Thread Wt (lbs)
2-1/16" 5,000 psi 2 1/16" 7.79" 8.46" 2.07" 2 3/8" EUE 52
2-9/16" 5,000 psi 2 9/16" 7.79" 9.65" 2.56" 2 7/8" EUE 60
Overview
Bottom hole test adapters or Treecaps allow a flexible
means of entry into the tubing bore. Apache tree caps
are constructed with one piece forging and is designed
to use where a integral flanged unit is preferred.
Bottom Hole Test Adapters

10. Overview
Apache Pressure Products offers a wide selection of tubing head adapters for transition from the wellhead
to the tree. Adapters are designed for mulitiple types of heads and hangers. Comes in threaded, flanged or
studded connections.
B1 Theaded Adapters
Flanged adapter with male externally
threaded top connection and female
bottom internally threaded both with
8rd EUE threads.
B2P Adapters
Flanged adapter with studded top
and 8rd EUE threaded bottoms.
A5P Adapters
Flanged adapter with studded top
and bottom pocket of 2” or 2.5”.
Available with 1/2” NPT test port.
Tubing Head Adapters
Flange Size Threaded Top Bottom Thread Wt. (lbs)
7-1/16" 2,000 2-3/8" UPTBG 2-3/8" UPTBG 117
7-1/16" 2,000 2-7/8" UPTBG 2-7/8" UPTBG 110
7-1/16" 3,000 2-3/8" UPTBG 2-3/8" UPTBG 142
7-1/16" 3,000 2-7/8" UPTBG 2-7/8" UPTBG 135
7-1/16" 3,000 3-1/2" UPTBG 3-1/2" UPTBG 145
7-1/16" 5,000 2-3/8" UPTBG 2-3/8" UPTBG 210
7-1/16" 5,000 2-7/8" UPTBG 2-7/8" UPTBG 195
7-1/16" 5,000 3-1/2" UPTBG 3-1/2" UPTBG 175
Flange Size Studded Top Bottom Thread Wt. (lbs)
7-1/16" 2,000 2-1/16" 2,000 2-3/8" UPTBG 107
7-1/16" 3,000 2-1/16" 5,000 2-3/8" UPTBG 114
7-1/16" 3,000 2-9/16" 5,000 2-7/8" UPTBG 170
7-1/16" 3,000 3-1/8" 5,000 3-1/2" UPTBG 225
7-1/16" 5,000 2-1/16" 5,000 2-3/8" UPTBG 160
7-1/16" 5,000 2-9/16" 5,000 2-7/8" UPTBG 230
7-1/16" 5,000 3-1/8" 5,000 3-1/2" UPTBG 330
Flange Size Studded Top Bottom Pocket Wt. (lbs)
7-1/16" 3,000 2-1/16" 5,000 2" 124
7-1/16" 3,000 2-9/16" 5,000 2-1/2" 117
7-1/16" 5,000 2-1/16" 5,000 2" 178
7-1/16" 5,000 2-9/16" 5,000 2-1/2" 175
7-1/16" 10,000 2-1/16" 10,000 2" 318
7-1/16" 10,000 2-9/16" 10,000 2-1/2" 316

11. Secondary Seals
Overview
Secondary seals are inserted in the bottom of a casing
or tubing spool. It is used to seal around the production
casing. Apache Pressure Products carries PE and HPE
secondary seals.
PE Seals
PE seal is inserted in the bottom
of a casing or tubing spool and
retained with a snap wire. The
seal is energized when the spool
is installed over the casing stub
and the flanged connection is
made up.
HPE Seals
HPE seal is inserted into a HPE bottom preparation
of most 10,000- 15,000 psi casing or tubing spools.
The bottom plate is threaded into the bottom prep
and is designed for high pressure applications
7" 9" 10-3/4"
4-1/2" 5,000 psi-15,000 psi 5,000 psi-15,000 psi
5" 5,000 psi-15,000 psi 5,000 psi-15,000 psi
5-1/2" 5,000 psi-15,000 psi 5,000 psi-15,000 psi
6-5/8" 5,000 psi-15,000 psi
7" 5,000 psi-15,000 psi
7-5/8" 5,000 psi-15,000 psi
8-5/8" 5,000 psi-15,000 psi
9-5/8" 5,000 psi-15,000 psi
Casing Size
SpoolNominalBottom Prep

12. C-22/29
Apache C-22 wrap around casing hangers incorporates
pack off, slip bowl and slips. Packoff seals the annulus
below the slips when casing load is applied. The C-22
Hanger’s controlled fricition reduces casing deflection.
C-22 casing hangers are easy to install and economical.
Nominal
Bowl Size
Casing Size
4-1/2"
5"
5-1/2"
7"
7-5/8"
5-1/2"
7"
7-5/8"
8-5/8"
9-5/8"
9-5/8"
10-3/4"
11-7/8"
13-3/8"
16"
11"
13-5/8"
16-3/4"
20"
Overview
Apache Pressure Products offers a wide selection of
Casing Hangers. Casing Hanger lands inside the casing
head and is responsible for hanging the casing string.
We supply both slip and mandrel style casing hangers.
Casing Hangers

13. TC1W Tubing Hanger
TC1W Wrap around hanger is designed to
seal off the casing annulus at the same time
supporting the tubing string and nippling
up the christmas tree without the BOP.
TC1A Tubing Hanger
TC1A is a threaded tubing hanger. The hanger
is energized by the weight of the tubing and
tightening the lock screws in the tubing head
flange.
TC1A-EN Tubing Hanger
TC1A-EN is an extended neck TC1A hanger with
packing rings that confine all of the well pressure
and fluids to the tubing bore. TC1A-EN hangers
can be modified to include connections and ports
for the hydraulic ontrol line in the event of
hydraulically controlled down-hole safety valve
installation.
Size Wt (lbs)
7 1/16" X 2 3/8" O.D. 70
7 1/16" X 2 7/8" O.D. 70
Size Wt (lbs)
7 1/16" X 2 3/8" O.D. 68
7 1/16" X 2 7/8" O.D. 68
Size Wt (lbs)
7 1/16" X 2 3/8" O.D. 77
7 1/16" X 2 7/8" O.D. 70
Overview
Apache Pressure Products offers a wide selection of
tubing hangers. Tubing hangers suspends the production
tubing and provide seal off of the casing annulus.

14. Studded Crosses and Tees
Overview
Apache Pressure Products offers a wide
selection of crosses and tees in different
sizes and pressures.
A, inch B, inch C, inch D, inch TEE Cross
2-1/16"2,000 2-1/16"2,000 3.50 3.50 2.06 2.06 95 85
2-1/16"5,000 2-1/16"5,000 4.50 4.50 2.06 2.06 160 161
2-9/16"2,000 2-9/16"2,000 4.50 4.50 2.56 2.56 125 119
2-9/16"5,000 2-1/16"5,000 4.50 5.00 2.56 2.06 375 255
2-9/16"5,000 2-9/16"5,000 5.00 5.00 2.56 2.56 350 225
3-1/8"2,000 3-1/8"2,000 4.50 4.50 3.12 3.12 198 185
3-1/8"3,000 2-1/16"5,000 4.50 5.00 3.12 2.06 264 231
3-1/8"3,000 2-9/16"5,000 5.00 5.00 3.12 2.56 350 275
3-1/8"3,000 3-1/8"3,000 5.00 5.00 3.12 3.12 264 271
3-1/8"5,000 2-1/16"5,000 4.50 5.50 3.12 2.06 264 295
3-1/8"5,000 2-9/16"5,000 5.50 5.50 3.12 2.56 364 310
3-1/8"5,000 3-1/8"5,000 5.50 5.50 3.12 3.12 414 321
4-1/16"2,000 4-1/16"2,000 5.50 5.50 4.06 4.06 405 354
4-1/16"3,000 3-1/8"3,000 5.00 6.12 4.06 3.12 451 435
4-1/16"3,000 4-1/16"3,000 6.12 6.12 4.06 4.06 495 451
4-1/16"5,000 2-9/16"5,000 5.00 6.50 4.06 2.56 447 425
4-1/16"5,000 3-1/8"5,000 5.50 6.50 4.06 3.12 488 425
4-1/16"5,000 4-1/16"5,000 6.50 6.50 4.06 2.56 565 486
1-13/16"10,000 1-13/16"10,000 4.38 4.38 1.81 1.81 191 187
1-13/16"15,000 1-13/16"15,000 5.00 5.00 1.81 1.81 257 253
2-1/16"10,000 1-13/16"10,000 4.38 4.38 2.06 1.81 191 187
2-1/16"10,000 2-1/16"10,000 4.38 4.38 2.06 2.06 191 187
2-1/16"15,000 1-13/16"15,000 5.00 5.00 2.06 1.81 257 253
2-1/16"15,000 1-13/16"10,000 5.00 5.00 2.06 2.06 257 253
2-9/16"10,000 2-1/16"10,000 4.50 5.12 2.56 1.81 246 241
2-9/16"10,000 1-13/16"15,000 4.50 5.12 2.56 2.06 246 241
2-9/16"10,000 2-9/16"10,000 5.12 5.12 2.56 2.56 286 280
2-9/16"15,000 1-13/16"15,000 5.50 5.50 2.56 1.81 386 307
2-9/16"15,000 2-1/16"15,000 5.50 5.50 2.56 2.06 389 350
2-9/16"15,000 2-9/16"15,000 5.50 5.50 2.56 2.56 375 335
3-1/16"10,000 1-13/16"10,000 4.50 5.88 3.06 1.81 370 350
3-1/16"10,000 3-1/16"10,000 4.50 5.88 3.06 2.06 370 350
3-1/16"10,000 2-9/16"10,000 5.12 5.88 3.06 2.56 407 433
3-1/16"10,000 3-1/16"10,000 5.88 5.88 3.06 3.06 480 464
3-1/16"15,000 1-13/16"15,000 6.31 6.31 3.06 1.81 486 470
3-1/16"15,000 2-1/16"15,000 6.31 6.31 3.06 2.06 470 440
3-1/16"15,000 2-9/16"15,000 6.31 6.31 3.06 2.56 440 432
3-1/16"15,000 3-1/16"15,000 6.31 6.31 3.06 3.06 430 422
Run Outlets
Dimensions Wt. (lbs)

15. Body Bonnet Stem Gate Seat Stem Seal Seat Seal
Bonnet
Seal
API CLASS AA
General Non-corrosive
Alloy Steel
Forging or
casting
Alloy Steel
Forging
Alloy
Nitrided
Alloy
Nitrided
Alloy
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS BB
General Slightly
Corrosive
Alloy Steel
Forging or
casting
Alloy Steel
Forging
A564
Type. 630
(17-4PH)
410 SS
Nitrided
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS CC
General Moderately
Corrosive, CO2
410
Stainless Steel
410
Stainless
Steel
A564
Type. 630
(17-4PH)
410 SS
Nitrided
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS DD-NL
Sour Non-corrosive
Alloy Steel
Forging or
casting
Alloy Steel
Forging
Alloy
Nitrided
Alloy
Nitrided
Alloy
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS EE-0,5
Sour Slightly Corrosive
Alloy Steel
Forging or
casting
Alloy Steel
Forging
A564
Type. 630
(17-4PH)
410 SS
Nitrided
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS EE-1,5
Sour
Moderately Corrosive
CO2
Alloy Steel
Forging or
casting
Alloy Steel
Forging
Inconel
718
410 SS
w/Hard
facing
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS EE-NL
Sour
Moderately Corrosive
CO2
Alloy Steel
Forging or
casting
Alloy Steel
Forging
Inconel
718
410 SS
w/Hard
facing
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS FF-0,5
Sour, Moderately
Corrosive, H2S
410
Stainless Steel
410
Stainless
Steel
A564
Type. 630
(17-4PH)
410 SS
Nitrided
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS FF-1,5
Sour
Highly Corrosive H2S
and CO2
410
Stainless Steel
410
Stainless
Steel
Inconel
718
410 SS
w/Hard
facing
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS FF-NL
Sour
Highly Corrosive H2S
and CO2
410
Stainless Steel
410
Stainless
Steel
Inconel
718
410 SS
w/Hard
facing
410 SS
Nitrided
Teflon FKM
Graphite PEEK
Viton 304or 316SS
API CLASS HH
High Corrosion
Alloy Steel
w/625 Claded
Alloy Steel
w/625
Claded
Inconel
718
Inconel
718/625
w/Hard
facing
Inconel
718/625
w/Hard
facing
Teflon FKM
Graphite PEEK
Viton Inconel 718
Service
Condition
Body Description
Material specification for API 6A
Gate Valves

16. The Apache slab gate is a high performance, bi-
directional slab gate valve is ideal for high pressure,
critical service applications from 3,000 psi through
20,000 psi.
Apache slab gate valve utilitizes a forged body and
bonnect with alloy steel and at the minimum meets
API PSL 2 requirements.
Apache slab gate valves comes in variety
of trim and product service levels, please consult
trim chart or specify well conditions at time of
inquiry for the best trim and PSL level for your
application. Also available in ball screw or hydraulic
operation at higher pressure ratings.
Overview
Slab Gate Valves
Size D (inch) E (inch) Wt (lbs)
1-13/16" 14.8 17 243
2-1/16" 15.5 17 329
2-9/16" 16.5 17 410
3-1/16" 17.4 18.75 518
4-1/16" 19.1 18.75 1118
5-1/8" 24.4 25 1528
3.06 24.38 7.9 BX-154
4.06 26.38 9.8 BX-155
5.12 29 12.7 BX-169
1.81 18.25 5.6 BX-151
2.06 20.5 6.1 BX-152
2.56 22.25 6.8 BX-153
A (Bore, inch) B (inch) C (inch) API Ring
Size C (inch) E(inch) Wt (lbs)
1-13/16" 5.9 17 260
2-1/16" 6.5 17 315
2-9/16" 7.7 18.75 576
3-1/16" 9 18.75 602
2.56 21 16.5 BX-153
3.06 23.56 17.4 BX-154
A(Bore, inch) B (inch) D (inch) API Ring
1.81 18 14.8 BX-151
2.06 19 15.5 BX-152
B (inch) D (inch) API Ring
14.62 15.5 R-24
16.62 16.5 R-27
18.62 17.4 R-35
21.62 19.1 R-39
28.62 24.4 R-44
29 27.1 R-46
29 27.3 R-46
32 27.6 R-467-1/16" 7.06 15.3 25 2187
7-1/16"x 6" 6 14.8 25 2106
7-1/16"x 6-3/8" 6.38 15 25 2132
4-1/16" 4.06 8.3 17 688
5-1/8" 5.12 11 18.75 1387
2-9/16" 2.56 5.9 13.5 289
3-1/8" 3.12 6.7 17 419
Size A(Bore, inch) C (inch) E(inch) Wt (lbs)
2-1/16" 2.06 5.1 13.5 216
Flanged 10,000 psi working Pressure
Flanged 15,000 psi working Pressure
Flanged 5,000 psi working Pressure

17. The Apache expanding gate valve is a bi-directional,
with a preferred sealing side valve. For wellhead,
production trees, and manifold applications with
working pressure rated up to 5,000 psi. Supplied
in flanged or threaded connections.
Apache expanding gate valves utilizes a wedge
gate design for easy manual operation and parts
are usually compatible with most major
manufacturer and distributors for easy repair and
maintenance.
Apache expanding gate valves comes in variety
of trim and product service levels, please consult
trim chart or specify well conditions at time of
inquiry for the best trim and PSL level for your
application.
Size A (Bore,inch) B (inch) C (inch) D (inch) E (inch) # of Turns Wt (lbs)
2-1/16" 2.06 9.62 5.3 19.6 13 13 126
2-9/16" 2.56 10.25 6.1 20.6 13 15-1/2 142
3-1/8" 3.12 11.38 7.6 22.8 16 20 236
4-1/16" 4.06 13 9.4 25.9 16 24-1/2 454
Threaded
Size A (Bore, inch) B (inch) C(inch) D(inch) E(inch) # of Turns Wt (lbs)
2-1/16" 2.06 14.62 5.3 19.6 13 13 176
2-9/16" 2.56 16.62 6.1 20.6 13 15-1/2 224
3-1/8" 3.12 18.62 7.6 22.8 16 20 334
4-1/16" 4.06 21.62 9.4 25.9 16 24-1/2 614
Flanged
Overview
Expanding Gate Valves

18. Ring Joint Gaskets
Apache carries a wide selection of Ring Joint Gaskets in low carbon steel
or stainless 316.
R-Type – Octagonal gaskets designed for flanges up to 5,000 psi
RX-Type – Interchangeable with R-type gaskets RX-type gaskets are pressure-energized
for improved sealing efficiency
BX-Type – High pressure gaskets for working pressures up to 20,000 psi. Designed with
pressure balance hole to equalize potential trapped gases within the grooves.
B7 Stud and nuts
B7 bolts are available in either two nuts per stud, tap end or combo styles. Standard
B7 are black finish. Special tap end thread configuration, finish or length requirements
are available upon request.
Needle Valves
Apache offers a full line of needle valves in carbon steel AISI 1040 or Stainless 316.
Various body style and seat selection ensures the right valve for your application.
Available in 6,000 psi and 10,000 psi.
Oilfield Ball Valves
Carbon by Stainless threaded ball valves with pressure rating up to 5,000 psi.
Available from 1” to 3” in both reduced and full port. All oilfield ball valves are
equipment with a grease fitting. Also available in bolted pattern body style.
Consumables

19. 1. PRICING - Products and services provided will be invoiced at the price shown and agreed upon at the time of
service, invoice, or, as printed on any and/or all Apache Pressure Products sales/information material including
purchase orders, letters, or emails. Printed prices do not include freight or any applicable taxes. Taxes and other fees
such as shipping will be quoted and or billed as per order, or as required.
2. TREMS OF PAYMENT – Payment is due upon receipt or as agreed to by contract. Any unpaid past due balance
will accrue interest and penalties at the rate of 12% APR, or the max allowed by state law, for the period that the past
due balance remains unpaid, and shall not be less than twenty dollars ($20.00). Further customers agree to pay all
attorney and/or collection fees and waives notice of such should subsequent litigation become required to effect
collection or to assert our interest for unpaid balances.
3. QUOTATIONS - All quotations and sales are F.O.B. our plant in Manvel, Texas. Net prices and discounts are
subject to change without notice. Prices in effect at the time of receipt of order whether higher or lower, will prevail. All
sales tax, use tax, or other excise taxes which may be required by law to be paid in connection with any sale will be
added to the gross sales price.
4. DELIVERY/FREIGHT - All shipments are F.O.B. Manvel, Texas unless otherwise stated. All promises of shipments
are as closely estimated as possible. We will make every effort to ship within the time promised, but do not guarantee
to do so, or assume further or implied liability with respect to delivery dates or timelines. Our responsibility ceases
upon delivery to any common carrier or other agent furnished or specified by the customer and we do not, unless
previously instructed, insure shipments beyond the point of delivery to such carriers. Full freight allowance will be
covered on individual orders of $3000.00-$5000.00 based upon the state to which the shipment will be delivered to.
The Freight carrier will be chosen by the seller unless otherwise instructed or agreed upon in advance by both parties.
Individual orders that do not meet the required amount will not receive freight allowance.
5. SHORTAGES AND DAMAGES IN TRANSIT - All claims for shortages or damaged products must be made within
five days after receipt of shipment. All lost or damaged materials in transit become the responsibility.
6. WARRANTY - This warranty is in lieu of all other warranties, expressed or implied, including any implied
warranty or merchantability or fitness for any use or purpose. All of Apache Pressure Products INC. products are
warranted to be free from manufacturing defects and workmanship for a period of one (1) year from the date of
shipment, and if found to be defective within that period the product will be replaced at no charge to the customer.
However, the product being returned must have been used in accordance with the intended or published purpose, and
approved installation and operating practices. There must be a properly filled out return authorization (RA) before
credit or replacement will be offered.
7. CANCELLATIONS/CHANGES - Cancellations or instructions to change work or delivery must be submitted in
writing to the seller. If any order is canceled the buyer will be responsible for the payment of work already performed
and any material already in use.

20. APACHE PRESSURE PRODUCTS
3909 BAILEY AVE
MANVEL, TX 77578
(713) 941-1669
(713) 941-2660
WWW.APACHEMFG.COM