Sr. Level Project Consultant with expertise in both EPC firms and as an Owner Representative Managed the E&I activities to meet the required project schedule from detailed design phase through project execution, completion and hand-over to Field Operations Group.
Novel 3D-Printed Soft Linear and Bending Actuators
Sanad samir Project Quality Control, Electrical, Instrumentation Construction Oil and Gas Engineering
1. Sanad Samir
Project Instrument / Electrical Field Engineer with 10+ years of service
experience at Construction, commissioning, start-up, planning and Engineering
+2- 012 800 80 391 (Alexandria; Egypt), sanad.samir@gmail.com and Skype ID: sanad.samir
Dear Sir/Madam,
Greetings for the day
Sr. Level Project Consultant with expertise in both EPC firms and as an Owner Representative Managed the E&I activities to
meet the required project schedule from detailed design phase through project execution, completion and hand-over to Field
Operations Group.
I am submitting to express my keen interest in the position Lead /Project QA/QC Electrical & Instrument Engineer.
I possess 10+ Years of progressive experience in the Construction, commissioning, start-up and planning oil and gas engineering
field. My professional history includes positions such as Sr. QA/QC E&I Engineer at Yemen SAFER & Total /YLNG plant as well as
QA/QC E&I Engineer at CCC GTL Shell/Qatar Gas production facilities.
Also I had the position of Electrical Engineer at Samsung Engineering Egypt and Instrumentations, Electrical Design/ Planning
Engineer at ECC Egypt
Carried out the construction works by the Contractors & vendors, ensuring that the time, cost, quality, safely and environment
requirements of construction activities are meet. So as to satisfy the contractual obligations and targets fixed by the project
Manager
Some of my core competencies are:
1. Project / Quality Control
2. Resource Management
3. Quality Management
4. Risk Management
5. Development Skills
6. Team Management
7. Electrical and Instrument
8. Cause & Effect Diagram
9. Design and Planning
Academically astute, with proven track record for excellence, resourcefulness, and initiative and dynamic leadership,
successfully executed key positions of multifarious nature and capacities during long stint of career. Being a focused, motivated
and goal-oriented professional, I have consistently proven my ability to handle operational and strategic levels of multiple
responsibilities in crisis and pressure, while operating under rigorous deadlines.
With an innate sense of task prioritization, managerial aptitude and result oriented attitude towards accelerating organizational
growth and that too in a high pressured, time bound and competitive environment, I reckon that my grooming level is apt to
look outward for a challenging middle level position, requiring complete grasp & grip of Engineering and high level of
professional loyalty, integrity and maturity.
A glance through my resume, attached along, shall familiarize you with my credentials. I am confident of fitting in the slot as
well as in the team. However, should you desire personal interaction; I may be called upon where the possibility of our
association could be explored further.
Thanking you,
Yours sincerely
Sanad samir
Page 1 of 9
2. QUALITY ASSURANCE ~ QUALITY CONTROL ~ DESIGN/ PLANNING~ PROJECT INSPECTION ~ PROJECT MANAGEMENT ~ PROJECT
CONTROL ~ ELECTRICAL INSTRUMENT ENGINEERING PROFESSIONAL
Aspiring for a challenging senior level position, one which will make best use of existing skills and experience and also further my personal and
professional development with a progressive and forward thinking organization
PROFILE SUMMARY
Diligent and result-oriented professional with 10+ years of overall experience; expertise
in the field of Engineering in the spectrum of Sr. E&I Engineer at Khalda Petroleum
Company (Apache) and Sr. QA/QC E&I Engineer at Yemen SAFER & Total /YLNG plant as
well as QA/QC E&I Engineer at CCC GTL Shell/Qatar Gas production facilities. also I had
the position of Electrical Engineer at Samsung Engineering Egypt and Instrumentations,
Electrical Design/ Planning Engineer at ECC Egypt
Demonstrated history of successful independently handling the Project Inspection,
Quality Audit and controlling the Projects as per schedule.
Versatile leader, capable to take up management job with the overall responsibilities of
controlling inspector's team/workforce under one distinguished umbrella.
Possess expertise and experience in coordinating, planning and scheduling of man
hours, material and other tools to complete any project towards timely completion.
Proficiency in planning manpower control as per the requirement of the project and
executing the same accordingly; organizing TQM system and controlling the project as
per the requirements proposed during contract agreement.
Expertise in reviewing of all types of drawing and guiding the subordinates in
accordance; well versed with process recruitment to get the skilled manpower for
smooth execution of project.
Recognized as a hands-on, proactive individual who can rapidly identify problems,
formulate tactical plans, initiate change and implement effective strategies in
challenging environments; instruct the subordinates technically and administratively to
get the maximum out of them by making them quality and safety aware.
Excellent judgement, decision making skills and ability to produce results in deadline-
driven environment; Continuous interaction with management representatives to
ensure smooth running of the project.
Excellent time management skills with proven ability to work accurately and quickly
prioritize, coordinate and consolidate tasks; resilient with a high level of personal
integrity and energy experience.
ACADEMIC QUALIFICATION
BSc. of Electrical, Electronic and Communications Engineering, Assiout University, Egypt, 2002.
PROJECTS HANDLED
Capital Projects:
Egypt Khalda Petroleum Company (Apache)
o Position: Project Electrical & Instrument Engineer
o Project: Hydra Gas Development Project
Mareb Yemen SAFER Exploration & Production Operations Company http://www.sepocye.com
o Position: Sr. QA /QC Electrical and instrument Engineer for Client Company in Yemen LNG project
o Company: SEPOC (safer exploration, production and Operation Company)
o Project contractors: CB&I (Houston, Texas USA), GENP (General Electric oil, gas –Nuovo Pignone, Italy), SOLAR
(Solar turbine a caterpillar company-USA), Technip company -France, HAWK Yemen and Berksan Turkey
o http://www.yemenlng.com/ws/en/go.aspx?c=proj_upstream
Ras Lafan Qatar CCIC Consolidated Contractors International Company http://www.ccc.gr
o Position: QA /QC Electrical and instrument Engineer in GTL project Qatar
o Client: QSGTL Qatar shell gas to liquid pearl project
o Project manager: KBR Kellogg brown & root international and JGC Middle East FZE
o http://www.shell.com.qa/en/products-services/pearl.html
Electrical and Instrument Engineer at Egypt Samsung engineering http://www.samsungengineering.com
Page 2 of 9
Core Competencies
Project / Quality Control
Project Engineering
Electrical Engineering
High Voltage
Instrumentation
Resource Management
Quality Management
Risk Management
Development Skills
Team Management
Inspection Assurance
Design/ planning
Soft Skills
Solution oriented
Attention to detail
Positive attitude
Relationship building
Influencing skills
Team player
Decision making
Loyalty, Honesty &
Integrity
Methodical and
organized
3. PROFESSIONAL SPAN
INTERNATIONAL EXPERIENCE-GULF
Khalda Petroleum Company (Apache) Since May 2013
Project E&I Engineer;
Joint venture Company between Egyptian General Petroleum Corporation (EGPC) and Apache Corporation
The company main work area is located in the Egypt's western Desert where the main activities of operations are done.
The activities include drilling, production, process of oil and gas and shipment as well.
Project: Hydra Gas Development Project
Hydra Energy is a specialist in small-field oil and gas developments targeting the production of hydrocarbons.
Studies engineering drawings and visits sites to become familiarized with work requirements and the general layout of the
facilities, especially DCS and PLC systems, ESD systems and F&G systems and their computers, process instrumentation in
plant and field and plant analysers.
Ensures that all instrumentation and control systems drawings, standards, specifications, manuals and data books are kept
up-to-date and “as-built”, and directs draftsmen and secretaries to carry out all corrections to reflect any alterations,
modifications and additions to instrument and control systems.
Carries out various duties related to capital investment projects and expense items for minor instrumentation and control
systems, modifications, improvements and alterations to the existing equipment to be executed by the client. Includes:
conducting feasibility studies, developing cost estimates in conjunction with the Cost & Contracts Engineer,
personally preparing conceptual or detailed designs or reviewing vendor’s final design drawings for approved projects,
preparing capital authorization requests for approval, preparing bills of materials, participating in preparing purchase
orders, following up on quotations,
Conducting technical bid analyses, answering queries from vendors and recommending suppliers or contractors.
Supervises the implementation of minor instrumentation and control systems modification and improvement projects
carried out in-house to ensure execution and completion of established Company standards and specifications.
Performs project engineering duties (including cost control, scheduling, contract preparation and administration) when
assigned as the project lead engineer.
Carries out various other duties related to major capital investment projects and expense items for modifications and
improvements to existing facilities or installation of new facilities to be executed by outside contractors. Includes
participating in technical bid analyses, reviewing design drawings submitted by contractors and proposing amendments as
necessary,
Specifying materials and equipment to be used, and supervising the execution of work to ensure compliance with drawings
and Company specifications and standards.
Attends meetings with contractors as necessary.
Reviews and checks payment certificates submitted by contractors. Ensure compliance with work satisfactorily completed,
makes necessary corrections, and submits to supervisor for endorsement and payment processing.
Acts as the focal point for instrumentation and control systems engineering matters and provides expert technical advice
to Management and other departments/divisions as required.
Troubleshoots complex or recurring instrument or control system problems and recommends sound and cost effective
solutions as the problems arise.
Stays abreast of state-of-the-art developments in the instrument engineering discipline, and provides regular information
to supervisor regarding new techniques, equipment and materials which may benefit the Company and its operations.
Responsible for the support of Company Safety, environment and Quality policies and programs,
Carrying out specific duties and responsibilities related to job as spelled out in Management system documentation,
policies, procedures, local documentation, Management System Manual, Safety Manual and other related documents.
Carries out other similar or related duties as per the direction from the Supervisor.
Works in accordance with approved Company policies, procedures and professional engineering standards. Is expected to
give expert technical advice in his engineering discipline. Work is regularly reviewed by Supervisor.
Supervises and provides work directions to Instrument and Control Systems Engineers of different project EPC contractors
and Vendors.
Maintaining the Quality management system compliant with ISO 9001-2000 and with statutory, regulatory requirements
and corporate procedures.
Review and compile all documents at handing-over for submission to the Client.
Page 3 of 9
4. Assist the PM/RE in compilation of all documents for the issuance of the Taking-Over Certificate.
SEPOC, SAFER Exploration & Production Operations Company, Yemen, Mareb May 2010 to May 2013
Senior Electrical and Instrument QA QC Engineer;
Project: CPU: Central Processing Unit
The Yemeni government has granted Yemen LNG exclusive rights to the gas reserves of the Marib area fields in block 18. The
reserves currently dedicated to the project include 9.15 trillion cubic feet (TCF) of proven reserves and 0.7 TCF of probable
reserves with 1 TCF allocated to the domestic market. The reserves were re-certified by the independent consultants DeGolyer
and MacNaughton in May 2005.
Job Description:
Responsible for review Engineering deliverable instrument documents and drawing
comment and assure the quality of these documents and drawings:-
• Project Specification “DCS, ESD, PLC, SCADA, F&GS, Field Instrument, instrument cables, Package equipment etc”
• Material Requisitions for instrument & Control “DCS, ESD, PLC, PSV & SRV, Control Valves, Shutdown Valves, Cables
etc”
• Instrument Data Sheet “Transmitters, Gauges, PSV & SRV, Control Valves, Shutdown Valves etc”
• System Drawing “Architecture, Logic, Loop Drawing … etc”
• Process Philosophy, Shutdown philosophy, PFD, PID and Cause & Effect
Responsible for preparing instruments and instrument valves data sheets
Responsible for instrument sizing calculations for Control Valves, Flow elements, Relief valves
Prepare an instrument and instrument valves requisitions
Issue technical bid tabulation for different type of field instrument
Review the instruments and instrument valves
Review vendor drawings and data, interface with suppliers, and other engineering disciplines
Participate in the development of P&ID's, cause and effect
Responsible for 3D PDMS modeling off line instruments, junction boxes, cable trays ,control panels
installation of analyzers and heat trace /cathodic protection etc
Extract and preparing Instrument location layouts, Cable routing layout
Perform cable tray sizing,
Prepare cable schedule, junction box and control panels wiring diagram, Instrument installation details
Prepare an MTO and material requisition for detailed installation materials (Cables, Cable trays)
Familiar to deal with Programmable logic controllers (PLC), program design, and trouble shooting
Deal with all Electronics totalizers for gas & liquid flow measurement configuration & loading
Installation & Construction Supervision for Instrument Cable Trays and Trenches, Junction Boxes
Installation of Main Panels and Cabinets and Field Instrument
Supervision for all the Instruments Preliminary Calibration (Contractor Workshop)
Supervision the cable continuity, cold and hot instrument loop check (Input, output, digital and analog),
Carry out Cause & Effect (Process, ITR and F&G) validation
Carry out On Job Training for SEPOC Operation and Maintenance staff
Review and Approve the Red-Mark drawing which provided by contractor
Prepare and completion of Pre-Commissioning and Commissioning Dossiers
Key Credentials:
the responsibility of controlling, monitoring and inspection E&I Activities
Accountable for documentation / QCP / ITP, review of drawings, scheduling of man hours and other operation and
construction related assignments.
Liable for preparation of Annual Electrical & Instrumentation Survey, Hotspot Survey Schedule for both construction and
commission facilities under YLNG Producing Division independently.
Performing assessment for the proposed modification for any existing and or to be constructed facilities.
Project Control: Looking after inspection of in service Motor, Junction Boxes, Sub Stations, PIBs’, Process Vessels, Skids’,
Cable Tray run, Conduit, MCC, Transformer, Instrumentation Equipment including Control Valves, Pressure Instruments,
Flow & Control Instruments
Assurance: Monitored pre commissioning of Electrical and Instrumentation Equipments/systems namely Transformer,
Motor, Generator, analyzer, Metering Skid, Instrument Loop and Valves, revision of ITPS’ & QCPS’
Risk Management: Doing root cause analysis, Risk Based Inspection
Certification and Assurance: Working on CPU facilities is the scope of work, conducting Quality Audit and assessment.
Development and Growth: Monitoring and inspecting E&I activities in the areas assigned, monitoring pre commissioning
of Electrical and Instrumentation Equipments/systems namely Transformer, Motor, Generator, Analyzer, Metering Skid,
Page 4 of 9
5. Instrument Loop and Valves. Performing PMCC walk through for any completed project before being put into service and
generate report as outcome, also done Loop Checking along with documentation as per NEC, SAES and other adopted
standard (ISO 9001-2000 etc.) and conducted & prepared Quality Audit Report.
CCIC, Ras Lafan, Qatar February 2008 -April 2010
QA QC Engineer (E&I) Engineer
Project: Pearl GTL
Construction of the world's largest gas to liquids (GTL) plant, Pearl GTL in Qatar, is a major step towards meeting the world’s
growing demand for cleaner energy.
The drive is on to make tomorrow's transport fuels and lubricants on a large scale from clean-burning natural gas. Construction
of the world's largest gas to liquids (GTL) plant, Pearl GTL in Qatar, is a major step towards meeting the world’s growing
demand for cleaner energy.
The plant, a joint development by Qatar Petroleum and Shell, will process about three billion barrels-of-oil-equivalent over its
lifetime from the world’s largest single non-associated gas field, the North Field, which stretches from Qatar’s coast out into the
Gulf. The North Field contains more than 900 trillion cubic feet of gas, about 15% of worldwide gas resources.*
Pearl GTL will produce cleaner-burning diesel and kerosene, base oils for top-tier lubricants, a chemical feedstock called
naphtha, which is used to make plastics, and normal paraffin, which is used to produce detergents.
It will produce enough fuel to fill over 160,000 cars a day and enough synthetic base oil each year to make lubricants for more
than 225 million cars.
Job Description:
Fully aware of contract requirements and procedures
Site coordination with all among parties during the both construction and commissioning
Follow up punch list activities in each area separately
Negotiate with client to reduce the client clam items
Monitoring and witnessing all 132 KVA HV/MV/LV cables splicing , puling , termination and testing
Inspect the cable tray, cable trench, duct bank, wires and branch cable conduit, instrument air line, impulse tubing for
instrument
Monitoring and witnessing installation and testing of lightning protection and electrical / instrument earthing systems
Monitoring the installation
testing of all E&I equipments (e.g. HV/MV/LV Switchgears , MCC`s , DP`s, transformers, UPS, stand by
generators/turbines , ATS, control panels , HVAC systems , pumps, power factor correction equipments, lighting systems ,
Check the fire alarm systems, access control systems , CCTV , central data , cabling systems LAN, fire fitting systems ,
motor operated valves , cathodic protection systems , heat trace systems , instrument control panels , consoles & desks ,
instrument interface panels &junction boxes , communication systems , public address & general alarm systems , ……etc )
Check inline Instrument control valve, on-off valve ,flow ,level ,pressure, temperature transmittal calibration, installation,
cabling and termination, loop checking, pre-commissioning, commissioning and logic function testing of offline
instruments (transmitter , junction box , local panels , switches , beacon , horn , analyzer house , shelter , air volume tank )
and control systems
Check the DCS/PCS, ESD system and F&G, PLC’s systems and SCADA network
Prepare, monitor and implement quality control procedure (QCP) and the inspection test plane (ITP) and Checks the
material approved request(MAR) to Ensure the materials delivered at site are as approved
ordered and Supervise and advise on testing methods (MS) procedures
Ensure approved testing methods are carried out
Generated non–conformance report (NCR) and observation reports according quality management procedure (QMP) and
project quality procedure (PQP) and project specifications
Report by mail to QA/QC manger Observation, Investigation, discrepancy reports
Check and controls flawless start up initiative (FSI)
Review technical procedure and technical query (TQ)
Check the request for inspection (RFI) and send to client
Check the status of (RFI) that checked by the inspectors to sign off the tags of request
Attended the quality control meeting internal and with client,
Report to the quality control manger the minutes of meting (MOM) and weekly report
Plan, schedule, coordinate and provide work directions for inspectors
Prepared the training program to qualify the E&I inspectors/supervisor and technicians
Check electrical and instrument testing equipment calibration
Control the equipment certificate
Witness for mechanical, welding equipments test and calibration in PMV
Conversant with the approved Health & Safety HSE policies / QA/QC procedures are implemented during inspection
activities
Page 5 of 9
6. Attend the audit schedule for E&I department
Closed the corrective action request (CAR) and reporting to QC Manager
Attend and participate projects design review meetings and Attend pre award meetings
Reviewed all drawings prior to release to ensure that they are complete and comply with project instructions, client
requirement. Applicable codes, standard & project specifications.
Samsung Engineering, Cairo, Egypt May 2006 -January 2008
Electrical and Instrument Engineer
Project: American University Cairo (AUC) New Campus
On a total project land area of 1 million m², the construction comprised of eleven parcels (groups of buildings) on a turnkey
bases, while the total built-up area amounted to 200 thousand m². Each building consists of a basement, ground & 3 floors.
The buildings consists of isolated RC foundation, RC concrete skeleton & very high-standard finishing such as mechanical fix
stone façades & internal finishing with marble, ceramic & gypsum boards. The electro mechanical works consists of central
HVAC connected to a central chilled water plant, plumbing, fire-fighting system, MV, LV system including transformers MRU,
backup generators, all lighting & low current system such as fire alarms, telephones & data systems.
Job Description:
Supervise the Installation & Construction for all Instrument and electrical Cable works (Trenches, trays, pulling, laying,
glanding, connection and termination)
Review designing power systems including power distribution, load calculations, transformer, switchboards and cabling
design, standby generation, UPS, earthing; internal and external lighting and lighting control systems; communications
design; and electronic safety and security design.
Critically reviewing design documentation (drawings, calculations and specifications) at all stages from concept to
construction documentation and providing valuable design input and direction.
Directs the preparation of circuit design sheets (Cable Block Diagrams) for electrical systems; electrical power distribution
apparatus specifications and reviews vendor drawings; circuit schedule including cable routing
Preparing the electrical shop drawings for (IR) For different Parcels including; MV system (66KVA substation & Generators
to feed switchgear (24KVA) with SF6 breakers; Step up & down Transformers, RMU, BUS BAR, Duct Bank; LV system
Power, Lighting, Cable Trays and trunk, MDB’s; ELV system Fire alarm, online doors, Communication
Preparing the request for inspected from consultant
Planning and scheduling for all electrical and instrument activities
Prepare all monthly, weekly, and daily activities
Instruct site engineers directly to follow up all work quality standards
Prepare progress reports (Monthly and weekly)
Cost estimation for variation orders
Hand over all the installation work to the client and get a completion certificate
Prepare the over all Man power schedule according to over all schedule
Proactively monitors projects to identify and address financial, safety and liability issues, as well as to ensure completion
on schedule
Prepare the over all Organization according to over all schedule
Order tools require for the project according to number of workers &work quality
Cost estimation for variation orders and negotiation with the client
Interface with client reviews and comments
Negotiate with client to reduce the client clam items
Interface with client reviews and comments
Coordinate between cables path and all among parties (other construction section and mechanical section)
Applies knowledge of project change control process to identify potential changes that may impact the electrical discipline
budget and schedule
Identifies, analyzes and addresses the root causes of both personnel and project issues
Erect the site construction electrical and instrument system
Complete the satisfaction of the project owner's representative
Site coordination with all among parties during the both construction and commissioning
Prepares monthly financial reports and attends status meetings
Perform construction management and related services such as Work Scheduling, Monitoring and Control.
Follow up punch list activities in each area separately
Preparation of final documents for the project final handing over
Key Credentials:
Page 6 of 9
7. Certification: Monitored and controlled inspection of Cable Tray, Conduit, Cable Laying, Duct Banks and other in
substations, PIB'S, MCC'S and in field installations,
Project / Quality Control: Apart from monitoring, done pre commissioning of Electrical and Instrumentation
Equipments/systems namely Transformer, Motor, Generator, analyzer, Metering Skid, Instrument Loop and Valves
Resource Management: Handled scheduling of manpower deployment alongside taking interview for the new prospect.
The responsibility is including but not limited to monitoring and inspecting E&I activities took place in the areas assigned.
Planning: Involved in scheduling the assigned responsibilities as well as planning for timely completion of the projects
based on strategic data and other factors
Ginza, El Minya, Egypt January 2005 -May 2006
Electrical and Instrument Engineer
Job Description:
Day to day control of specific works and projects, including design considerations and co-ordination with suppliers,
customers and other trades, witness tests etc
review all Construction Contractor’s Design Submittals including detailed design calculation, structural design and analysis,
construction drawings, installation details and other similar/related activities and ensure that all design details submitted
by construction contractors comply with Company’s requirements
Ensure that the operations comply with Health and Safety requirements and documentation regime
Effective communication with customers, internal staff, suppliers and subcontractors
Monitor costs and achieve desired financial performance to Maintain quality of workmanship and Contractual compliance
Meet customer expectation within the limit of contractual requirements
Negotiate vendor sub orders and monitor projects to ensure control over delivery, cost and quality
Presents and explains proposals, reports, and findings to clients
Prepare, submit and obtain approvals
Review customer order specifications
Maintain contract files (electronic & paper) up to date, in good order and accessible to the project team
Provide monthly reports for financial evaluations
Hold weekly construction progress meetings separately with Contractors to determine work progress, discuss problems,
coordinate actions, plan and anticipate future requirements.
Selection of suppliers & subcontractors etc on a contract to contract basis
Conduct site surveys as required
Ensure that the company policy and procedures are adhered
Interpret design/drawings for crafts installing materials and provide hands-on training as necessary
Attend meetings with other contractors and client representatives to coordinate design and construction effort
Review and comment on constructability of design as required Conduct value engineering functions
Research and resolve drawing interpretation problems, conflicts, interferences and errors
Coordinate with other disciplines engineers building control lines
Elevations for accurate measurement and correct installation of materials or equipment
Witness all field testing of the projects and all component parts of the projects by the contractors or their appointed
inspection agencies in their entirety.
Participate in scheduling and logistics
Coordinate work with Safety Manager and Quality Control Manager
Prepare field design change requisitions and "as built" drawings, as required
Prepare all required documentation records such as status reports, punch lists
Verify that all completed work complies with applicable codes, drawings and specifications
Responsible for team management planning, organizing, controlling, reporting and leading
Determines workload for their team, including short-, medium- and long-term business goals and objectives
Maintains effective communication within the team and with clients
Organizes and maintains project files Maintains a neat and organized work area which allows efficient access to
information required by other team members
Verifies that drawings and designs are in accordance with company production and design standards
Prepares monthly financial reports and attends status meetings
Perform additional assignments per supervisor's direction
Key Credentials:
Done supervision of servicing of instrumentation and electrical equipments i.e. hydraulically & pneumatically operated
Pressure Gauges, Precession Instruments (Navigational), cable routing, witnessing installation of grounding cable and
servicing of avionics Equipments apart from monitoring pre commissioning of Electrical and Instrumentation
equipments/systems namely Transformer, Motor, Generator, analyzer, Metering Skid, Instrument Loop and Valves .
Page 7 of 9
8. Project Control and Development: It includes execution of techno-administrative duties, reviewing of Electrical and
instrumentation drawing, guiding subordinates to execute and briefing superior about the job progress.
Design: Handled review of drawings.
CPD and Assurance: Managed imparting training to subordinates.
Assurance: Apart from the stated responsibilities done root cause analysis, conducting internal quality audit, etc.
Resource Management: Managed scheduling of manpower deployment alongside conducting training for the new prospect
is within my scope of responsibilities.
The responsibility is including but not limited to supervision E&I activities taking place in the areas assigned. attending
daily, weekly and monthly project quality meetings
Planning: Involved in scheduling the assigned responsibilities as well as planning for timely completion of the projects
based on strategic data and other factors.
ECC (Engineering Construction Company), Cairo, Egypt May 2002 -January 2005
E&I Design/ Planning Engineer
Job Description:
Preparing & check Electrical and Instrument /Control shop drawings
Designed all detailed drawings concerning cabling activities. This included cable routing layouts, cable sections and road
crossing details, electrical power cable block diagrams and the relevant power installation details.
Designed all detailed drawings concerning lighting activities. This included lighting layouts, lighting distribution schedules,
lighting block diagrams, lighting elevation drawings and the relevant lighting installation details.
Designed all detailed drawings concerning earthing activities. This included earthing layouts, lightning protection layouts
and the relevant earthing installation details.
Designed all detailed drawings concerning substations. This included substation equipment layouts, substation cable
routing drawings, substation cable routing details and substation elevation drawings
Designed all drawings associated with the one line diagrams. This included key one line diagrams, elementary one line
diagrams and detailed protection/metering one line diagrams.
Designed the hazardous area classification drawings for the proper selection of the electrical equipment.
Organizes and maintains project files Maintains a neat and organized work area which allows efficient access to
information required by other team members
Verifies that drawings and designs are in accordance with company production and design standards
Provide all possible assistance during construction activities at sites.
Preparation & check the final documents for the project final handing over
Manage the Electrical and Instrumentations works during both construction and commissioning
Complete the satisfaction of the project owner's representative
Design in O&G along with Power employing various electrical equipment
Preparation of technical proposals, reports, designs, equipment specifications
Design of various calculations such as: Voltage drop, Short Circuit, Relay settings, cable sizing Value and Lighting
calculations and preparation of emergency and normal lighting layouts
MV/LV design, reliability, safety, and implementation procedures
Checking and preparation of electrical equipment specifications and coordination with Vendors in the technical
requirements
Interpretation of Client specifications and selection optimization of technology fit for purpose
Preparation of detailed design drawings for Instrumentation, control, shutdown, fire & gas and telecom systems
Preparation of specifications for electrical switchgears, control panels, VFDs, UPS, MCCs and Distribution boards
Preparation of specifications for electrical and instrument bulk items
Preparation of load lists and data sheets
Carry out various electrical calculations which involve Load Flow, Short Circuit, Motor starting and Harmonic studies
Carry out sizing of various electrical equipment like Transformers, UPS, Battery, Switchboards and Cables
Co-ordinate with equipment vendors for the integration of their systems to Ensure all interfaces are correctly addressed
Co-ordinate with other disciplines for design review and carry out
Evaluate and review client scope of works and drawings
Evaluate technical submittals from sub – contractors and vendors
Raise necessary Technical Queries in relation to design, engineering and constructability
Key Credentials:
Provided construction engineering planning coverage, where area of coverage is Boiler, ESP, CWPH, DG Building, Control
Building, and Substation as independent Inspection agency representative.
Managed the inspection for Substation Construction, PCB Installation, and Cable Trench inspection, Cable Tray Installation,
MCC Installation, Transformer Installation and Commissioning, Motor Installation, Instrumentation Installation including
Control Valves, Pressure Instruments, Flow Instruments and Control Instruments.
Page 8 of 9
9. PERSONAL DOSSIER
Qualifications : BSc of Electrical and instrument Engineering, Assiout University, Egypt, 2002
Religion : Christian/ Orthodox
Languages : Fluent Arabic and English
Driving license : up to date
Passport : up to date
Marital status : Married
Date of Birth : Sep’08, 1979
Nationality : Egyptian
Leisure : running, reading, computing and internet
Member of Egyptian Engineers syndicate
Page 9 of 9
10. PERSONAL DOSSIER
Qualifications : BSc of Electrical and instrument Engineering, Assiout University, Egypt, 2002
Religion : Christian/ Orthodox
Languages : Fluent Arabic and English
Driving license : up to date
Passport : up to date
Marital status : Married
Date of Birth : Sep’08, 1979
Nationality : Egyptian
Leisure : running, reading, computing and internet
Member of Egyptian Engineers syndicate
Page 9 of 9