Maxxion DRM 1+5 water based products are concentratrates that are diluted at the point of application and sprayed on the shuttering surface and left to dry before pouring the concrete. . It facilitates quick, easy and clean release of concrete from forms. It provides a smooth, flat surface, free of voids and defects. It does not transfer from forms and it leaves concrete surfaces unstained, ready for re-use almost instantly. It is the CHEAPEST oil available in terms of cost per sqft applied. POWER RELEASE OIL contains mould release fluid used extensively for poured concrete structures with plywood, hardboard ..To be applied on horizontal surface ONLY. Works on vertical surface only after drying, but needs to be applied on horizontal shuttering surface.

1. INTRODUCTION
Maxxion DRM 1+5 water based products are concentratrates
that are diluted at the point of application and sprayed on the
shuttering surface and left to dry before pouring the concrete.
These concentates are basically 100% eco friendly
emulsions. They not only facilitate quick, easy and clean
release of concrete from forms,but also provide a flat, smooth
surface finish to the concrete. More importantly, they leave
concrete surfaces unstained, and the plates ready for re-use
instantly. It is the CHEAPEST OIL available in the market in
terms of COST per sq ft applied area.
Water-BasedDeshutteringConcentrates
DMR RANGE OF PRODUCTS at1+5dilution
DESHUTTERING RESULTS USING DMR PRODUCTS
Method of Application: By Spray or Sprinkler
STANDARDFEATURES
RECOMMENDEDTOAPPLYON
1. Facilitates smooth removal of moulds or forms.
2. Superior surface finish of the concrete.
3. Increase life of formwork
4. Protects formwork from erosion and deterioration
and ensures smooth concrete finish.
USAGE
DMR range of products are basically deshuttering
emulsions used extensively for dehuttering plywood,
hardboad,plasticformwork toensurethesmooth,cleanthe
concrete finish. Recommended to be applied on horizontal
surface ONLY. Works on vertical surface only when applied
keeping the ply horizontal and later erected after drying.
Recommended for use only on ply and plastic shuttering
plates. Can be used on horizontal steel casting plates. Not
recommended for steel moulds having vertical surfaces and
aluminium shuttering plates.
PLYWOOD AND PLASTIC FORMWORK
USER INSTRUCTIONS: After spraying the product onto
ply surface, leave it to dry for 30-45 min. Erect ply to slab
or column ONLY after drying of ply surface.
PROPERTIES
Appearance Dark Brown Concentrate
Odour Fragrant
Sp. Gr. (30°C) 0.95 - 0.97
Chemical State Water Soluble Emulsion
Coverage
>100 Sq.Meter per ltr diluted
product
Doses
1 part product dilute with 5
parts water
Packaging
1 ltr, 5 ltr, 26 ltr, 50 ltr drum
and 210 ltr barrel.
Shelf Life 3-6 months
Storage Shade Only
HEALTH AND SAFETY : This product is unlikely to present any safety & health hazard when properly used in the
recommended application. Avoid contact with skin and eyes. After skin contact, wash with water and soap.
Office Address: Maxima Product Solution Office No 506, Olympia Building (Achalare Realtors) Mumbai -
Bangalore Highway, Near TATA Showroom, Baner, Pune.
Website: www.maximalubes.com | E-mail ID: sales@maximalubes.com
Oil has never looked so Good!