solexin SOLUCIONES EXPERTAS ENINCENDIOS
LIGHT WEIGHT CEMENT
REINFORCED WITH FIBER
TbilisiPublic Service Hall- Tbilisi,Georgia.EstudioFuksas
OUTDOOR DRY CONSTRUCTION SYSTEM
UNIFLEX IS THE ANSWER TO THE REALIZATION OF
PARTICULARLY FLEXIBLE SOLUTIONS.
THIS BOARD IS REINFORCED CEMENT WITH
LIGHTWEIGHT FIBRES, NOT CONTAINS GYPSUM,
CELLULOSE OR ASBESTOS AVOIDING DAMAGE IN
IT HAS, THEREFORE, HIGH DURABILITY IN SATURATED
HUMIDITY ENVIRONMENTS, HIGH TEMPERATURES, AND
ALSO IN THE PRESENCE FREEZE CONTINUES.
THE MAIN FEATURE IS THE ABILITY TO ADAPT TO ANY
CURVATURE WITHOUT HAVING TO HANDLE THE
BOARDS ADAPT TO ANY SITUATION AND ALLOW ANY
TYPE OF ARCHITECTURE.
flexible cement board
without limits for design, innovative and imaginative
UNIFLEX is the perfect board for areas of high curvature, both
outdoors and indoors.
The ease and speed of installation are features of thisproduct.
• The most flexible cement in the market, allows us to be more
creative without limits toimagination
• UNIFLEX is Solexin response to demand for construction coatings that require
• Radius of curvature up to 15 cm
• Free of gypsum, cellulose or asbestos
• Dry construction
• Easy and quick to install
an exceptional board
UNIFLEX is the first cement board that allows naturally the maximum
curvature, simply bendingmanually!
Without breaking or cracking, with a radius of only 15centimetres.
- BEND BY THE VISIBLE SIDE
- BEND SLOWLY
- CONTROL THE CURVATURE
UNIFLEX is reinforced cement board 12.5 mm. thick most flexible in the market,
able to reach a radius of curvature of 150 mm (90 degree angles) without breaks
or cracks, and in a natural way.
Produced in a continuous cycle and obtained from a mixture of Portland cement,
and on both sides, front and back, with a layer of fiberglass and polymeric
lining, with a layer of fiberglass and polymeric lining, the longitudinal edges are
polished, and have a smooth and robust finish thanks to technology
EdgeTech®- double coated with mesh and fiberglass tape. The ends (edges of
the board) at the top are straight.
It is used for beams and columns linings, arches construction, walls and curved
ceilings and in any case in whichever any curved surface is necessary.
It offers a sleek and sturdy support for the placement of ceramic linings, glass
mosaics and brick linings or stonematerials.
It can be smoothed with UNIJOINT to obtain a smooth surface, ready to paint.
BEAMS AND COLUMNS CLADDING
CONSTRUCTION OF ARCHES
CONSTRUCTION OF WALLS AND
VAULT AND COLUMN
maximum creative freedom
· The UNIFLEX boards of 12,5 mm. guarantee the
construction of concave or convex surfaces directly
on construction work thanks to ability to bend in dry
with a radius of 15 cm.
Heydar Aliyev Center - Baku, Azerbaijan - Zaha Hadid Architects
WITH CEMENT AND
FREE OF GYPSUM AND
IT FITS ANY SUPPORT
The UNIFLEX boards do not suffer deterioration in extreme situations. Hence its
high durability in moisture saturated environments, high temperatures, as
swimming pools, saunas, steam baths; and also in the presence of continuous frost,
when the external environment is characterized by very harsh climates.
However, the main feature is the ability to adapt to any creative form... without
the need for complex operations of prefabrication or "conformation".
Boards can be adapted to any type of support and allow any architectural form to
reach sculptural forms.
Particularly useful to solve, directly in situ, requirements of curved linings without
the need for predispositions or moulds for forms of profiles, grooves or arcs.
TO WALLS CURVES
VAULT AND COLUMNS
Installation does not require sophisticated equipment, the used in dry building
systems is enough for the realization of more complex shapes.
Easiness and speed of installation are the characteristics of this innovative
Boards can be smoothed with the paste on basis of cement UNIJOINT to obtain a
smooth surface ready to paint.
UNIFLEX board is the ideal support for mosaics or ceramics in environments
characterized by high temperature and humidity, since it is not altered or
It can withstand shocks, provides excellent static support, is resistant to fungi and
UNIFLEX board is classified in class A1 (incombustible) in fire reaction.
The flexibility offered by UNIFLEX boards manages buildings
that have never imagined before sosimply.
There are no systems in the world with this degree of
flexibility: UNIFLEX is a unique patented product and the most
innovative designers have been experimenting successfully. It
offers possibilities for realization unbeatable, with high
strength characteristics, it is able, in addition, withstand the
weather conditions more adverse, such as high temperatures,
high levels of humidity or the presence of continuousfrost.
DURATION AND STRENGTH
UNIFLEX board allow to solve quickly and
effectively all these problems at work related
to the construction of surfaces or curved
fittings, which often it produces slowdowns
and difficulties ofrealization.
Arcs, curves, vault and columns have never
been so easy to build without the need of
superstructures with high cost or external
supplies. In fact, it is possible to use standard
profiles for solutions of great interest both
from an aesthetic and functional point of
view, and, especially in rehabilitation, where
existing structures are adapted to receive
pipelines of installations and ducts.
The special composition of the UNIFLEX
boards also guarantees the solidity and
stability in time of the product, that they
are unalterable to moisture, fungi or
bacteria and therefore particularly
suitable in those situations where it is
essential to keep the environment constantly
The studs should be placed in one direction for half of the curve and in the opposite
direction in the other half.
For the construction of partition walls, stagger the vertical joints of the boards of at
least two studs with respect to the vertical joints of the plates located on the opposite
The outer face of the structure is indicated onthe board.
r ≤ 50 cm x ≤ 15 cm
r ≤ 90 cm x ≤ 20 cm
r ≤ 120 cm x ≤ 30 cm
r ≤ 50 cm x ≤ 20cm
r ≤ 90 cm x ≤ 30cm
r ≤ 50 cm x ≤ 15 cm
r ≤ 90 cm x ≤ 20 cm
r ≤ 120 cm x ≤ 30 cm
Placement of vertical main steel
structure Depending on the radius of
curvature (see figures)
Board fixation to the vertical main steel
structure using screws self- drilling.
Previous joint lining with UNITAPE tape
and smoothing with paste and placement
of UNIROLL fiberglassmesh.
realization of an idea
UNIFLEX boards find their ideal use in those architectural situations free of traditional schemes.
They are especially used in contemporary architectural interventions where constructive flexibility is an
Its flexibility allows to satisfy any designidea.
Easy to handle and adapt, optimum to mount in a solid way and ensure more curvilinear forms.
To achieve convex curves (A), as the lining of a column, fixing the board to the main steel structure must be
performed from its vertical side, screw with the appropriate self-tapping screws, and forming the sheet to the
support structure, which are fixed below the successive main steel structure.
In the case of lining a structure with the concave curvature (B), the board must be initially placed in the
centre of the curve and fixed to an appropriate main steel structure.
Later adapt the board to the realization of the structure and fix it in direction to the exterior sides of the board.
To attach the vertical main steel structure, look at the diagram on the previous page. For lightweight supports
carpentry structures, placing the crosspiece to a maximum distance of 1000 mm.
IT ADAPTS TO ANY CURVE
CUT WITH A CUTTER
TECHNICAL DATA VALUES
Thickness 12,5 mm
Length 2000 mm
Thicknesstolerances + /-0,8mm
Squadro Right angle
Depth of the longitudinal joint 1,5mm
Scratch resistance >850 N
Impact resistence Any damage
Linear thermalexpansion 0,013 mm/C°/m
Thermal conductivity 0,39 W/mC°
Water vaportransmission 1975 g/hm2
Water vapor permeability μ 54
Bacteria resistance 0(nogrowth)
Fungi resistance 0(nogrowth)
Fire reaction A1 (incombustible)
Radius of curvature 15cm
Brands and trade names are exclusive property of their respective owners.
They are the
supportive profiles of
the boards. Metallic
profiles for building
walls, false ceilings,
cladding walls and
All profiles are steel-
coated by hot zinc
Manufactured according EN 10142 standard.
Variable measures depending on the specific
Thick acrylic lining of
colored paste suitable for
UNIPAN and UNIFLEX
Based on acrylic resin
emulsified, with quartz
High resistance to light
• Self drilling
• Countersunk head
screws, specific to
Resistance to saline
Lengths of 32 and 41
• MeshSize:2,2x 2,2mm.
Glass fiber reinforcement for
joints between boards
Roll: of 75 mm. wide and 50
EN - ISO 13934-1
• Forinterior/exterioruse • Teks Point for profiles
• Autoclampingfinsunderwith thickness from 0.7 • Elongation: 4.5% ·
hishead mmto2 mm.
Cement paste made
to be used for treating
joints and forcomplete
UNIPAN and UNIFLEX
for joints between boards
UNIPAN® and UNIFLEX®.
Roll: 1,5m height and 50 m
1) Uniflex board fixed with
2) Unijoint paste for
3) Uniroll net in fiberglass.
Available in the
Assures extremely smooth
mixed with resins.
be usedin treatment
of joints and
Net of alkali- resistant
fiberglass for the
reinforcement of UNIPAN®
and UNIFLEX® boards.
Roll:of1,10m.wideand50 • Tensilestrength:2100/N50mm.
4) Unijoint paste for joining.
5) Unijoint paste for final
6) Acrylic lining of Unijoint
• Meshsize: 4x 4,5mm
• Elongation: 3,8%