3. As you are aware of by now
Bartec has released software
Revision 39!
This tutorial will show you how to
update your tool to the latest and
greatest software Bartec has to
offer
4. First make sure your
Tool is powered off
And NOT plugged
Into your PC
5. Go to our website at
www.bartecusa.com and click the
log in tab as shown below.
6. Log into your account using
your user name and
password
14. Insert the USB cord into your PC then
insert the other end into your tool…The
USB port for your tool is located on the
right side
15. This removable disk screen should pop up on
your computer screen containing a file labeled
PROG.BIN
If the removable disk window doesn’t launch click on the
start key at the bottom of the screen and open the
removable disk located under the devices with removable
storage tab
16. Click and drag or copy and paste
the update file into the removable
disk window
17. Once you move the update file to the
window it will automatically begin to
download the program to your tool
18. Within seconds your computer will
show it is downloading the file to
your tool…this process will take
around ten seconds to complete
19. During this process your tool
screen will read NO UPDATE
FILES FOUND
Once the downloading process
is complete remove the USB
cord from the tool and press
the test button located in the
middle of the tool
