Cracking the ‘Business Process Outsourcing’ Code Main.pptx
Pd plast literature
1. P.D.CHEMICALS
Liquid Integral Waterproofing compound
PDPLAST110 is an integral liquid waterproofing METHOD OF APPLICATION:
admixture for concrete and cement mortar. It
has good plasticising properties which makes Add 80-90% water to the concrete based on Mix
concrete cohesive and prevents segregation. Design by weight. The correct quantity of
The liquid is to be added to the wet concrete or PDPLAST110 should be measured with
mortar. It fills up the capillaries in the concrete recommended dispenser and should be added to
giving effective waterproofing. the concrete with remaining mixing water. Allow
to mix it for recommended mixing time. The
AREA OF APPLICATION: addition of PDPLAST110 to dry mixes or
cement is not recommended
It is used for waterproofing of concrete and
cement-sand mortar used in basements, roof DOSAGE:
slabs and screeds, water retaining structures, As a starting point, a dose of 600ml per 100kg
bathrooms, balconies, water tanks, external of cement is recommended. Optimum dosage of
plastering, sumps and drains, etc. PDPLAST110 should be determined in trial
mixes. Please consult P.D.Chemicals Technical
FEATURES & BENEFITS: staff for further information.
Increase durability, by increase in EFFECTS OF OVER-DOSAGE:
impermeability. A severe over-dosage of PDPLAST110 will
Reduces shrinkage cracks in plaster & result in the following:
concrete.
Concrete containing PDPLAST110 is Slight set retardation.
resistant to water penetration either Increase in workability
under conditions of hydrostatic pressure Slight increase in air content
or capillary absorption.
Providing concrete is properly cured, the
Sulphate attack is reduced due to the
ultimate concrete strength will not be adversely
sulphate bearing ground water being
affected.
resisted.
Makes the mortar / concrete more
cohesive.
Economical in application.
Pumpability and surface finish of the
concrete is greatly improved.
STANDARDS:
ASTM C 494 – Type A and D
2. PDPLAST110
TECHNICAL PROPERTIES: PDPLAST110 is compatible with all types of
Portland cements including sulphate resisting
Appearance Brown free flowing liquid cement.
Specific Gravity 1.200 + 0.020
0
@30 C STORAGE:
Chloride content Nil
Ph Minimum 6 PDPLAST110 must be stored at above 5 C
0
temperature. If the product has frozen, thaw at
room temperature and agitate to completely
PDPLAST110 is a chloride free product. The
reconstitute it in original form. Store under
shelf life of the product is 1 year when stored as
cover, protect it from direct sunlight. Failure to
recommended.
comply with recommended storage condition
IMPORTANT POINTS TO REMEMBER: may result in premature deterioration of the
product or packaging.
Ensure w/c ratio should not exceed 0.5.
PACKAGING:
Keep lowest possible water content in
concrete compatible with achieving full PDPLAST110 is available in 25 kg & 260 kg
compaction. HDPE drum or in bulk.
3. Place Concrete quickly & ensure it SAFETY PRECAUTIONS:
thoroughly compacted. PDPLAST110 is a non-toxic and inflammable.
When
Protect new concrete Against rapid in contact with the skin, it should be washed
drying out and ensure adequate and with cold water.
complete curing by using PDPLAST
curing compounds.
MECHANISM:
PDPLAST110 significantly reduces water
demand to
P.D.CHEMICALS
Branch office -Gate No:164/1,Triveni
Nagar,Nigadi-Talawade Rode,Pune-14
Cell: +91 9049800090.
Email:paragd.enterprises@gmail.com
enable production of good workability concrete
with a minimum water/cement ratio.
PDPLAST110 disrupts
the cellular network within
the concrete mass (capillaries), that are
normally interconnected thereby reducing the
concrete permeability.