1. Characteristics …
❑ Speediness & Correctness
Capability of dealing with 1500 ~ 2000 ISO. drawings in a day.
Capability of delivering Welding Map Drawings(Erection & Fabrication drawings) & reports
from 5000 ISO. Drawings in a week.
Guarantee of Client’s Maximum Design Time for proven Piping Quality.
Any type of Piping ISO. Drawings can be developed into successful Welding Map
Drawings for speedy Piping Construction Planning.
❑ Color-Style Drawings in Pdf Format
2D Drawing Editor like AutoCAD is not necessary.
Delivery of color-style Welding Map Drawings to supply Client’s easy identification of
Piping components and welds.
Fabrication components(for Shop) are represented in Dark Green color.
Erection components(for Field) are represented in Dark Magenta color.
Fabrication welds(for Shop) are represented in Blue color.
Erection welds(for Field) are represented in Dark Magenta color.
Piping Supports are represented in Red color.
❑ Grouping of All Connected Drawings
All connected Welding Map Drawings are delivered in a same folder named as a
sequential number.
ISO. MATRIX
3. Supply of Client Data…
❑ IDF, PDF files
Idf, pcf files from 3D System like PDS, PDMS, SP3D and etc.
Idf, Pcf files are required to be supplied as much as possible for complete connection
group.
❑ Line Index Data(Excel format – Excel 97-2003)
Excel file should include all data to be printed out on Welding Map Drawings.
Data include design temperature, design pressure, operating temperature, operating
pressure, revision number, ISO. Drawing number, etc…
❑ ISO. Border file(AutoCAD dwg – Ver. 2014 & lower)
Project Name, Job Number, Client Logo, Contractor Logo, etc.
❑ Schedule Data(Excel format – Excel 97-2003)
Tabulated Schedule data according to Piping Class, Size, EndType
❑ Random Length Data(Excel format – Excel 97-2003)
Tabulated Pipe Random Length according to Piping Class
❑ Ectra Requirement
Any Spool Requirement to be applied. / Any type of customized Reports
< Inch Bore > < mm Bore >
1
4. Preliminary Work
❑ All Joint Numbering
All weld joints are sequentially numbered with balloon(Shop Weld) or double diamond(Field Weld)
All thread joints are sequentially numbered with balloon (prefix : SC-7)
All bolt joints are sequentially numbered with balloon (prefix : BT-8)
All support joints are sequentially numbered with balloon (prefix : part number-9)
❑ Marking of Field Welds
Long pipes are split by field welds according to random length.
All external weld joints connected to other pipelines are marked as Field Welds.
Change welds on both ends of pipe running through platform
❑ Marking of Spool Numbers
All piping spools are sequentially numbered with pointed double box.
❑ Coloring of WM Drawings
Fabrication components(for Shop) are represented in Dark Green color.
Erection components(for Field) are represented in Dark Magenta color.
Fabrication welds(for Shop) are represented in Blue color.
Erection welds(for Field) are represented in Dark Magenta color.
❑ Generation of Full WM Drawing List
Connected Group Name / WM Drawing number(ERECTION) / Spool Count / WM Drawing
number(FABRICATION) are listed up.
2
5. Preliminary Deliverables from
❑ Welding Map Drawing files(Adobe pdf format)
Zipped file containing
- Erection & Fabrication WM Drawings grouped by Piping connection
- Full WM Drawing List
❑ Welding Map Report(Excel format) for Client Feed Back
Weld List Report file Containing
- All Weld Data matching issued Preliminary WM Drawings
- All Material Data matching issued Preliminary WM Drawings
ISO. MATRIX3
7. Check Preliminary Deliverables by Client
❑ Check & Assign Field Weld by Construction SI
For bulky Spools
- Assign New Field Weld and mark in the issued Weld List(Weld Type Modification)
4
Spool numbered as SP-001 is too bulky.
If shop weld numbered as 3 needs to be
marked as field weld, make a comment in the
Weld List like following.
8. Supply of Client Feed Back Data
❑ Weld Type Modification Report
Assign New Field Welds for convenient construction & mark them in the issued Weld List.
- Change the Construction Category(FABRICATION ERECTION).
- Change the color in Red. Utilize Weld number for weld identification.
❑ Material Modification Report
Change the Construction Category of Piping Components(FABRICATION ERECTION).
- Check the mistakenly assigned Construction Category & mark them in the issued Material List.
- Change the color in Red. Utilize Part Number data for material identification.
5
9. Final Work
❑ Modify the WM Drawing according to Client Feed Back & Re-generate Drawings/Reports.
Change the Construction Category of Welds or Piping Components
6
Shop weld numbered as 3 is changed into field
weld and new spool number is created. Weld
List will be output as following.
10. Final Deliverables from
❑ Welding Map Drawing files(Adobe pdf format)
Zipped file containing
- Erection & Fabrication WM Drawings grouped by Piping connection
- Full WM Drawing List
❑ PCF files for 3D Piping Model(Split by Spool)
These PCF files can be converted into 3D Piping Model(.vue) via SmartPlant InterOp Publisher.
- Users can review 3D Piping Model by Spool unit using SmartPlant Review.
ISO. MATRIX7
11. Final Deliverables from
❑ Welding Map Drawing Report(Excel format)
Excel Report file containing
- Bolt Joint List / Thread Joint List / Weld Joint List / Cut Pipe List / Material List / Spool List
/ Support List
Thread Joint List
Weld Joint List
ISO. MATRIX
Cut Pipe List
7
Bolt Joint Report
13. Welding Map Drawing (Erection)
Shop welds are colored in Blue.
Shop weld numbers are shown in Circle
shapes.
Field welds are colored in Magenta.
Field weld numbers are shown in double
diamond shapes.
Fabrication materials are colored in Green.
Erection materials are colored in Magenta.
All piping materials are separated properly
according to their Construction Category.
Spool numbers are shown in
Bolt joints are shown in circle shapes.
- Default Prefix is BT-8
Thread joints are shown in circle shapes.
- Default Prefix is SC-7
Support joints are shown in circle shapes.
- Default Prefix is (support part number – 9)
Weld list is tabulated on the right-bottom side
of WM drawing.
Cut pipe list is tabulated on the bottom side of
the WM drawing.
Barcode 128 can be applied on the WM
drawing according to designated naming
convention.
14. Welding Map Drawing (Fabrication)
Shop welds are colored in Blue.
Shop weld numbers are shown in Circle
shapes.
No Field weld is shown.
No Field weld number is shown.
Fabrication materials are colored in Green.
No Erection material is shown.
Spool number is shown on the right bottom
side of the WM drawing.
No Bolt joint is shown.
No Thread joint is shown.
Support joints are shown in circle shapes.
- Default Prefix is (support part number – 9)
Weld list is tabulated on the right-bottom side
of WM drawing.
Cut pipe list is tabulated on the bottom side of
the WM drawing.
All markings including(weld number, support
number, part number, cut pipe number, spool
number, etc.) are conform to those shown on
WM Drawing(Erection).
Barcode 128 can be applied on the WM
drawing according to designated naming
convention.