Beta contech powerpoint products presentation

1. • RAISED ACCESS FLOORING
• ARCHITECTURAL EXPANSION JOINT SYSTEMS
• ARCHITECTURAL & INDUSTRIAL IMPACT
PROTECTION SYSTEMS
• SPEED BUMPS & BUMPER GUARDS
• TECHNICAL PROFILE SYSTEMS
• GARBAGE & LINEN CHUTES

2. For General Offices, Call Centers, Computer Rooms, etc ...
Panel Core: Wood, Calcium Sulphate, Cementations
Composite. Pedestals are adjustable 10 to 100 CM.

3. Panel Core
 Concrete Core
 Calcium Sulfate Core
 Fiber Core
Pedestals
•Pre-galvanized steel
•Adjustment from 10 to over 100 cm

4. Choosing Criteria
Important criteria when choosing an access
floor system are:
 Load bearing capacities
 Electrostatic behavior
 Fire protection
 Hydrothermal requirements

6. Architectural joints covers for:
 Pedestrian Floors.
 Vehicular Floors.
 Interior and Exterior Walls.
 Ceilings and Roofs.
Components are made up from extruded
aluminum, synthetic rubber, stainless steel, or brass.

7.  Allow the normal expansion
and contraction of the structure.
 Support the structure’s physical
imposed and transient loadings.
 Form a seal against the ingress of
aggressive media such as: water,
chemicals, biological matter.
 Resist the wearing forces of impact,
abrasion and corrosion associated with traffic.

8. The criteria for joint selection are:

9. Materials
Finishes  Mill Finish Aluminum
 2B Finish Stainless Steel
 Clear Anodized Aluminum
 Seal: Black, brown, gray, beige

10. Profiles Examples
 For floors (for installation
after Screwing)
 For covering joints in ceilings, walls
and facades - surface fixing
 For precast construction and fair
faced in-situ concrete
(synthetic rubber profile)

11. Example for Installation Instructions
Seismic Profiles
SFP- Series

12. Protect, beautify and preserve
your interior wall system from
damages.

13.  Handrails : Sculpted, Flat and Cylindrical Profiles
 Wall Guards : Flat and Sculpted
 Accent Rails
 Chair Rub Rails
 Corner Guards : Flush and Surface-Mounted
 Vinyl Doors and Frame Guards
 Material: Vinyl, aluminum, wood, clear lexan and stainless steel

14. HANDRAILS
Sculpted Profiles
Flat Profiles
Cylindrical Profiles

15. Hand Rails Material:
VINYL Extruded According to
 ASTM D-256-91 & ASTM E-84-81A for flammability & flame spread.
 ANSI –A117.1 for pullout & point load
 ASTM – 256-906/93A & 93A-00 for impact resistance
 ASTM D-543-87 for chemical & stain resistance
Aluminum alloy 6063
 Manufactured in accordance with FS-QQ-A-200 9/D

16. Handrails Selection Guide

17. Corner Guards Applications
 Flush Mounted
 Surface Mounted
Material for Corner Protection
& Rub Rails
 Vinyl
 Clear polycarbonate
 Stainless steel
 Aluminum

18. Wall Guards
Flat
Sculpted
AccentRails

19. It is used warehouse, Parking
garage
Heavy Duty Bumps

20. Types Heavy Duty Bumps
 Heavy - Duty Bumpers E-1
 Heavy - Duty Bumpers M-1
 Heavy - Duty Bumpers D-2/D-3/D-4/D-6
 Heavy - Duty Bumpers E-2

21. Extensively in commercial parking garages
and building service areas.
Speed Bumps and Bumpers

22. Maximize wall surface area protection and
High impact absorption.

23. Types Examples:
Type CG-NE3 is available with chamfered
corners, and is suitable for many concrete
columns and archways in parking areas.

25. For Hotels,
Hospitals, High Rises
And Residential Towers.

26. requirements of environmental health and safety.

27. SFSP provides Refuse and Linen Chutes to customer
requirements form the following high quality materials:
Materials:
Material 1.5 mm 2.0 mm 3.0 mm Standard
Stainless Steel Type 304 * * * BS 1449
Stainless Steel Type 316 * * * BS 1449
Galvanized Steel B2 * * *
BS 1449
ASTM A527
Aluminized Steel CR4 * * * ASTM A463
Aluminum SIC/H2 * * * BS 1470

28. Component Garbage and Linen
Chutes:

30.  They are used to join floors of the same or differing
material and thickness.
 The rounded shape also allows the profile to be
used to edge shallow floors max 5 mm thick.

31.  SKIRTING (steel)
 BTATT - SKIRTING
 BTAR - SKIRTING
 BTPF - SKIRTING 62F
 CSPPK - CABLE RACEWAY
 RET - WASHER AND CAP
 PGAW - PROANGLE WOOD
 PRBSS - PROBAND
 PSBF - PROBATH FLEX
 PSB – PROBATH
 PCRAA - PROCOVER 14PT
 PDRI - PRODRAIN 10
 PFC - PROEDGE FLEX

32.  PRFAC - PROFINAL (steel)
 PFLTA - PROFINLIST 20
 PFX – PROFLEX
 PFX05PR - PROFLEX 05PR
 PFXAC - PROFLEX ACC (steel)
 PFXACPR - PROFLEX ACC PR (stainless steel)
 PFXALN - PROFLEX ALN (natural alluminium)
 PFLO – PROFOIL
 PFMT - PROFOILMAT 03
 PIAC - PROINTER AC
 PIAA - PROINTER AL
 PISL – PROISOL

33.  PJAA - PROJOLLY
 PJOCSL - PROJOLLY (chromed brass)
 PJAC - PROJOLLY – PROTERMINAL
 PJE - PROJOLLY ECO
 PJACH15 - PROJOLLY H:15 (steel)
 PJALH15 - PROJOLLY H:15 (aluminum)
 PJMR - PROJOLLY MARBLE 12,5
 PJACML - PROJOLLY MIRROR LINE
 PJALR - PROJOLLY MOSAIC/ RESIN
 PJQT - PROJOLLY QUART
 PJQAA - PROJOLLY SQUARE