This document presents an RFID-based car parking system. It includes an introduction, block diagram, working, components, circuit diagram, features, advantages, applications, and future scope. The key points are:
1. The system uses RFID and IR sensors to automatically detect when cars enter and exit the parking lot.
2. The block diagram shows the main components: microcontroller, motor driver, power supply, LCD, RFID module, and IR module.
3. RFID works by wirelessly transmitting a unique serial number when an RFID tag is within range of the reader.
4. The parking system provides benefits like accurate tracking of vehicles, data collection, increased security, improved
3. ๏ฑWe have built a system which will
automatically sense the entry and exit of
cars.
๏ฑ We have developed a
microcontroller which is used to sense
the movement of cars.
3
4. 4
In this block diagram We
consist of following blocks
๏ฑMicrocontroller
๏ฑMotor Driver
๏ฑPower Supply
๏ฑLCD
๏ฑRFID Module
๏ฑIR Module
5. 1. RFID is a general term that is
used to describe a system that
transmits a unique serial
number of an object
wirelessly, using radio waves.
2. The RFID card reader read the
RFID tag in range and outputs
unique identification code of the
tag at baud rate of 9600.
3. The data from RFID reader can
be interfaced to be read by
microcontroller or PC.
7. 7
๏Power Requirment = +5v to +12v DC
๏Radio Frequency used = 125KHz
๏IR frequency = 38khz
๏RFID Reader :-
Read Distance = 3cm
Input Voltage = 5to 15 V AC or DC
Detection Range= 2โ Inches contact-less
Valid Tag in Range = Indicated by Buzzer and LED
8. 8
๏ผAccurately identify and authorize
vehicle movement
๏ผ Collect and record vehicle movement
data
๏ผIncrease security within the parking
facility
๏ผ Improve customer service
๏ผSave Time For Parking .
9. ๏ถIt used in pay& park
place.
๏ถIt used in Market place,
cinema theotre ,
hotels,Hosptial,in crowed
citiesโฆetc.
10. 10
1. This project can be enhanced for
tracking the vehicle speed on the roads
2. To differentiate the vehicles from VIPs
and staff.
3. The camera can be used for security.
4. By using GPS system we can find where
the car park and also we can find number of
vacancy available in parking system.
11.
12. This project in which we have
involved ourselves for the first time features a
lot of facilities, which we are glad to bring out.
Modifications can be done to work on payโandโ
park scheme. Also it reduces the unregulated
parking with this has encouraged us to try out
new circuit ideas and implement them.
12