This 2 day course is intended to provide interested parties with an overview of the fundamentals of naval architecture, to help them develop a better understanding of the science of ship design, and therefore their influence on the design and operation of ships. The course will consider key aspects in ship design, such as ship stability and hydrostatistics, hull structures, durability, powering and machinery requirements as well as expected resistances when operating in the marine environment. Finally, these key areas will be integrated together within the typical design process used to develop the design of a ship.

1. Intensive Training Course | Limited Group Size | So Book Early!
Introduction to Ship Design
and Naval Architecture
30 – 31 October 2014 | M Hotel, Singapore
Book and Pay Early to
SAVE UP TO SGD400!
Key Learning Objectives
• Understand the importance of naval architecture in design,
construction, operation and maintenance of ships
• Identify key areas of knowledge supporting naval
architecture – ship stability, manoeuvring, seakeeping,
ship hull & structures, powering machinery and resistance
• Comply with international regulations and frameworks
under IMO, ILO and SOLAS to ensure ship performance
and safety
• Evaluate the economic and technical feasibility of ship
• Appreciate the technical aspects of ship design and better
understand their influence on the design and operation of
ships
• Understand the key principles, design constraints, and
• Find out what makes a structurally sound, efficient, and
stable vessel and use this knowledge to make informed
decisions
Or register a team of 3 or more delegates and take advantage of
our Special Group Rate, PLUS – the 4th delegate attends for free!
Customer Service Hotline: +65 6508 2401
Maritime
Training Academy
an informa business
design and construction
causes of hull failure and ship structures
Save up to 40%
with Inhouse Training
Special Group
Savings Available
All participants receive
a Course Certificate
www.ibc-asia.com/navalarchitecture
You may also be interested in:
Shipyard Management – Design, Planning & Operations
28 - 29 October 2014, Singapore
Who Should Attend
Representatives from Shipowners, Managers, Shipyards, Shipbuilders,
and Parts Suppliers that need to understand the management of shipyard
operations including:
• Marine Engineer, Operations and Technical Managers
• Superintendents
• Naval Architects, Draughtsman and Marine Surveyors
• Design Engineers
• Project Managers
• Fleet Managers
• Contract Managers and Specialist
• Ship Conversion Specialist
• Marine Equipment Vendors
Course Director
Professor George James Bruce, Retired Professor of Ship Repair and
Conversion, School of Marine Science and Technology, University of
Newcastle
Professor Bruce has 30 years industrial experience in shipbuilding including
more recent roles in facilities development and marine technology
research. He has consulted and delivered project management training
for shipbuilders, ship repair and marine companies across the UK, Spain,
Portugal, Italy, Greece, Abu Dhabi and Oman. George was previously
involved in three major EU funded projects in support of the ship repair
industry where he worked on developing and transferring new technology
into their operations. He was formerly Manager of Policy and Standards
Development with the Maritime Safety Authority of New Zealand and
recently retired from teaching shipyard production and management at the
School of Marine Science and Technology, Newcastle University.

2. Introduction to Ship Design and Naval Architecture
About the Course
Ship design is a complicated process involving the multiple input
requirements from many other professionals. This includes navigating
and engineering officers, managers, charterers, superintendents,
surveyors, owners, operations staff and even passengers all having
different requirements, which often clash with each other and yet
being intrinsically linked.
This 2 day course is intended to provide interested parties with an
overview of the fundamentals of naval architecture, to help them
develop a better understanding of the science of ship design, and
therefore their influence on the design and operation of ships.
The course will consider key aspects in ship design, such as ship
stability and hydrostatistics, hull structures, durability, powering
and machinery requirements as well as expected resistances when
operating in the marine environment. Finally, these key areas will be
integrated together within the typical design process used to develop
What Past Delegates Liked
About Our Maritime Courses
About the Course Director the design of a ship.
Professor George James Bruce, Retired Professor of Ship
Repair and Conversion, School of Marine Science and
Technology, University of Newcastle
George recently retired as Professor of Ship Repair and
Conversion at Newcastle University, where he taught
shipyard production and management. He continues to be
active in teaching, presenting an MSc module in Marine
Project Management in the UK and Singapore. He is also
Director of Incremental Limited, a company providing
management information software and consultancy for ship
repair and ship construction companies. He has recently
provided project management training in Oman, Greece
and Curacao, and advice on shipyard developments in the
UK, and also in Abu Dhabi and Greece.
While at Newcastle University, he led or participated
in three major EU funded projects in support of the ship
repair industry, SYRIOS – to develop computer based
management Information Systems, INTERMAR – to
explore and understand the ship repair supply chain and
develop e-commerce tools and SHIPMATES – to develop
novel technologies for ship repair. He has carried out a
number of projects with SMEs in the marine and other
sectors to transfer new technology into the operations
of the companies. He has worked with small and large
shipbuilding and repair companies in UK, Spain, Portugal,
Italy and Greece.
George previously advised companies, local and national
governments on the development of shipbuilding and
repair facilities. He has worked in over forty countries,
is a past member of the ship repair working group of
European Shipbuilders (CESA) and a past member
of the management council of the Shipbuilders and
Shiprepairers Association. He was previously technical
director at A & P Appledore, a leading marine
consultancy in the 1980s. He also worked for British
Shipbuilders after training and early career at Swan
Hunter Shipbuilders. At Swan Hunter he specialised
in ship production and played a major role in the
development of new facilities at Wallsend and Hebburn
Shipyards on the River Tyne. George trained as a naval
architect and also holds an MBA.
IBC Training Academy Upcoming Training Courses!
Scan the QR Code
with your smartphone
and download the
updated training
calendar
Fundamentals of Dynamic Positioning
29 September – 1 October 2014, Singapore
Maritime Law & Contract Fundamentals
9 – 10 October 2014, Singapore
Offshore Vessels Sale & Purchase,Chartering
and Financing
27 – 28 October 2014, Singapore
Shipyard Management – Design, Planning
& Operations
28 – 29 October 2014, Singapore
Train the Team! Save up to 40%
with our On-site Tuition
Want to send the whole team? Why not consider one of our On-site packages and save up to
40%! No matter where you are based in the region let IBC Asia bring our extensive faculty of
internationally recognised trainers directly to your door. Choose from any one of our 130+
public training courses and we will ensure a customised fit for your organisation. Either sign
up for an existing course, which we would be more than happy to alter to meet your needs,
or take our Tailor-Made option and let us build a course perfect for ensuring the delivery of
your company’s goals. (8 attendees or more)
To talk through the many options available please call our
training specialist: Miki Kong
+65 6508 2477 onsite.training@ibcasia.com.sg
IBC Training Academy
IBC Maritime Training Academy is the Asian training division of IBC Asia, part of the
Informa Group and a public listed company in the UK. Informa’s main business is in the
specialist information providing for global markets. We operate in 70 countries, 150
offices worldwide with over 7000 employees. We have over 25 years experience in
providing innovative, focused and high quality business information and training
products designed to help you improve the way your business is managed.
“The trainer is experienced & provided lots of information
and his experience. The course is something new to me
and provided me with more knowledge.”
~ Sembawang Shipyard Pte Ltd
“Very interactive, objective and well informed”
~ Thoresen & Co (Bangkok) Ltd
“Interaction with the trainer/speaker and delegates is very
useful .Very fruitful workshop”
~ Ecospec Marine Technology
“Trainer is knowledgeable & lively. Course materials are
informative and educational”
~ Jurong SML Pte Ltd
REGISTER TODAY! +65 6508 2401 register@ibcasia.com.sg www.ibc-asia.com/navalarchitecture

3. COURSE OUTLINE
Course Registration: 8:30am
Course Commencement: 9:00am
Course Conclusion: 5:00pm
Explanation of Timings: These times act as a guide and may be modified slightly depending
on the depth of class discussion and whether assessments are being conducted.
Course Programme: This program is a guide and may be altered to better address
participant requirements on a consensus basis.
Understanding Naval Architecture
Overview of Marine Activities - Types of ships and other marine
vehicles
What is Naval Architecture?
• History and development
• Principal areas of knowledge
• What does a Naval Architect do, and why do we need Naval
Architecture?
• How does Naval Architecture relate to other engineering
disciplines
Some basic tools
• Definitions, nomenclature and notation
• Ship terminology
• Tonnage and other measures of ship size.
Hydrostatics and Ship Stability - Why Ships Float
Archimedes’ Principle and flotation
Displacement, flotation and equilibrium
Hydrostatic curves - displacement and draught for a hull form
Centre of buoyancy and centre of gravity
Conditions of stability, neutral stability and instability
Draught determination
Angles of list
Instability - Large angle and free surface effects
Measuring stability using metacentric height
Stability during ship docking and launching
[Workshop] Practical Demonstration on Principle of Stability
Surrounding Marine Environment and Operating
Challenges for Ships
Wind, water and air
Waves - general nature and characteristics
Protection of the environment
• Impact of ships on the environment
• Design to minimise impact and risks
Ship Movements in the Marine Environment
Hydrodynamics, water flow and resistance
Resistance
• Concept of frictional resistance
• Wave making resistance including effect of hull form and
Froude Number
• Total resistance and vessel speed
Propulsion and Powering
• Measurements of power and efficiency of the propulsion
system
• Power and fuel requirements
• Approximation tools for determining power and fuel
requirements
• Basic propeller design and matching
Ship manoeuvring and motions
Ship operations
• Navigation
• Shallow water
• Ice infested water
• Transiting canals
[Workshop] Practical Demonstration on Hydrodynamics
Ship Structures, Durability and Strength
Hull structures
Construction Materials – Steel, Aluminum and
Fibre-reinforced plastic (FRP)
Construction
• Quality criteria
• Welding and bonding technologies
• Models, CAD/CAM systems
Structural responses to motions
Concept of stress in materials, and stress in an idealized
beam
Overview of shipbuilding materials and corrosion in the
marine environment
Forces acting on a ship
• Primary forces acting on a ship and primary structure
• Secondary forces acting on a ship and secondary structure
• Load, shear force and bending moment diagrams
Stress distribution along the hull
Stress concentration points and metal fatigue
Avoiding scenario of hull failures
[Workshop] Practical Demonstration on Ship Structures using
Simple Models
International Regulatory Requirements and Frameworks -
Ensuring Ship Safety and Capability
IMO and ILO regulations and frameworks
Statutory compliance
Port & Flag State Control
Classification societies
Standards – International vs. National
Environment protection
Safety – SOLAS and ICLL framework
Ship construction and maintenance
Ship Design Process
Design stages – Early/Preliminary, Contract and Final
Specifications
The design process
• Economic and technical feasibility study and design brief
• Functional design and approval by owners, classification and
regulatory
• Production design e.g. use of design spiral as a design methodology
Hull form
Powering and Machinery requirements
General arrangements and ship layouts
• Cargo handling (freight and passengers)
• Layout and access
• Space allocation
The internal ship environment
• Crew living environment and factors
• Physical factors - temperature, noise, vibration etc.
Different ship types, special service craft and warships
Piracy and terrorism
[Case Study] On-going Basic Design Exercise to Create a Ship
Design
REGISTER TODAY! +65 6508 2401 register@ibcasia.com.sg www.ibc-asia.com/navalarchitecture

4. ENJOY SUBSTANTIAL SAVINGS WITH
OUR MULTIPLE BOOKING DISCOUNT!
When 3 or more book onto this course.
See pricing table for full details
Introduction to Ship Design and Naval Architecture
Customer Service Hotline
+65 6508 2401
LET IBC ASIA COME TO YOU! To talk through the many options available please
HOTEL INFORMATION
M Hotel
81 Anson Road, Singapore 079908
Tel: +65 6500 6202 / +65 9339 3854
Fax: +65 6224 3173
Contact person: Adrian Wong
Email: adrian.wong@millenniumhotels.com
Introduction to Ship Design and Naval Architecture
SPECIAL RATE NORMAL RATE
SGD 2,995 (SAVE SGD 400) SGD 3,195 (SAVE SGD 200) SGD 3,395
FREE
Please photocopy for additional delegates
This label contains your priority booking code. To expedite registration, please do not remove label. If you have
already received a copy of this brochure, we apologise. For reasons of confidentiality, your full particulars were not
available to IBC Asia (S) Pte Ltd for deduplication prior to mail drop.
FEE PER
DELEGATE
Delegate 1 Details
Name: Dr/Mr/Ms
Job Title:
Department
Tel:
Mobile No.:
Email:
Who is Head of your Department?
Who is Head of Training?
RESERVE YOUR PLACE TODAY!
Delegate 2 Details
Name: Dr/Mr/Ms
Job Title:
Department
Tel:
Mobile No.:
Email:
Delegate 3 Details
Name: Dr/Mr/Ms
Job Title:
Department
Tel:
Mobile No.:
Email:
Delegate 4 Details
Name: Dr/Mr/Ms
Job Title:
Department
Tel:
Mobile No.:
Email:
Company Information
Company Name:
Address:
Main Business/Activity:
Postal Code:
REG NO. 200108203N
call our training specialist Miki Kong
Tel: +65 6508 2477 | Email: onsite.training@ibcasia.com.sg
I cannot attend this event but
please include me in your mailing list.
Yes! I/We Will Attend
Payment Method (Please tick:) I enclose my bankers draft / cheque payable to IBC Asia (S) Pte Ltd
I am paying by bank transfer (copy attached)
Payment by Credit Card. (AMEX, VISA or MasterCard accepted)
CREDIT CARD PAYMENTS
The best way to pay by credit card is through our secure on-line registration process, simply log on to the website at www.ibc-asia.com/
navalarchitecture and click “Register On-line”. If you would prefer to pay over the phone please complete the contact name and details
and our Customer Services Team will call within 24 hours to take payment. As we treat your credit card information in the strictest
confidence, please do not send payment details by email.
Credit card contact: Department:
Direct phone number: Email:
PAYMENT TERMS
Payment must be received 10 business days prior to the event. To
take advantage of discounts with an expiry date, registration and
payment must be received by the cut-off date.
• Payment by bankers draft or cheque in S$ or US$ should be
made in favour of “IBC Asia (S) Pte Ltd” and mailed to:
IBC Asia (S) Pte Ltd
c/o Informa Regional Business Services
111 Somerset Road, TripleOne Somerset #10-06
Singapore 238164
Attn: The Accounts Receivable Team
• Payment by bank transfer in S$ or US$ made payable to:
IBC Asia (S) Pte Ltd
A/C No.:147-059513-001 (S$)
A/C No.:260-457866-178 (US$)
The Hongkong and Shanghai Banking Corporation Limited
21 Collyer Quay, HSBC Building
Singapore 049320
Bank Swift Code: HSBCSGSG
Bank Code: 7232
• Payment by Credit Card (AMEX, VISA or MasterCard).
The best way to pay by credit card is through our secure portal
built into the website. To pay by phone please indicate the
contact name and details below and our Customer Services
Team will call within 24 hours to take payment. Please do not
send credit card information by email.
• Special Group Discount pricing is applicable to groups of 3 or more delegates from the same organisation registering for the same event, at the same time.
Fee stated is the discounted price PER DELEGATE. Only one discount applies - either the early bird rate OR special rate OR Special Group Discount.
• All fees stated include luncheons, refreshments and complete set of documentation. It does not include the cost of accommodation and travel.
• A 7% Goods & Services Tax (GST) is applicable to all Singapore based companies for Singapore venue.
CANCELLATIONS / SUBSTITUTION
Should you be unable to attend, a substitute delegate is welcome
at no extra charge. Cancellations must be received in writing at
least 10 business days before the start of the event, to receive a
refund less 10% processing fee per registration. The company
regrets that no refund will be made available for cancellation
notifications received less than 10 business days before the event.
IMPORTANT NOTE
Please quote the name of the delegate, event title and invoice
number on the advice when remitting payment. Bank charges are
to be deducted from participating organisations own accounts.
Please fax your payment details (copy of remittance advice, cheque
or draft to +65 6508 2407).
Attendance will only be permitted upon receipt of full payment.
Participants wishing to register at the door are responsible to ensure
all details are as published. IBC assumes no further liability or
obligation, beyond the refund of the paid registration fee, in the
event of postponement or cancellation by IBC.
DATA PROTECTION
The personal information entered during your registration/order,
or provided by you, will be held on a database and may be shared
with companies in the Informa Group in the UK and internationally.
Occasionally, your details may be obtained from or shared with
external companies who wish to communicate with you offers
related to your business activities. If you do not wish your details
to be used for this purpose, please contact our Database Department
at Email: database@ibcasia.com.sg, Tel: +65 6508 2400 or Fax:
+65 6508 2408.
If undelivered, please return to:
111 Somerset Road,
TripleOne Somerset #10-06, Singapore 238164
Tel: +65 6508 2400 Fax: +65 6508 2408
30 – 31 October 2014 | M Hotel, Singapore
6 EASY WAYS TO REGISTER
Email
register@ibcasia.com.sg
Fax
+65 6508 2407
Web
www.ibc-asia.com/navalarchitecture
MAIL the attached registration
form with your cheque to
IBC Asia (S) Pte Ltd
c/o Informa Regional Business
Services
111 Somerset Road, TripleOne
Somerset #10-06, Singapore
238164
Scan the QR Code
with your smartphone
and register today
EARLY BIRD RATE
Register and Pay
on or before 22 August 2014
Register and Pay
on or before 26 September 2014
Register and Pay
after 26 September 2014
Individuals
Special Group
Discount
Book a group of 3 or more delegates and pay per delegate
SGD 2,895 (Save SGD 500 per delegate and 4th attends FREE!)
P52114 WEB
REGISTER TODAY! +65 6508 2401 register@ibcasia.com.sg www.ibc-asia.com/navalarchitecture