2. 耐普矿机
NAIPU MINING MACHINERY
Jiangxi Naipu Mining is a manufacturer specializing in developing, manufacturing, distributing and servicing mining
equipment and spares. The company is accredited to ISO-9001:2008, ISO-14001:2004 and OHSAS 18001:2007. The company is
accredited to a domestic high-and-new-tech enterprise certification.
Naipu develops a variety of products, covering the mineral processing flows in non-ferrous metals, ferrous metals and
non-metals industries, with its main products as of slurry pumps and rubber wet ends, hydrocyclones, rubber mill liners and
trommels, rubber stators and impellers for flotation machines, rubber and polyurethane screen panels and plates, steel and rubber
composite pipes and hard-wall mining hoses. The Company also applies new polymer materials of rubber and polyurethane in the
manufacturing of mining equipment spares, resulting in higher abrasion and corrosion resistance performance and doubling their
service life than that of metal ones.
Naipu possesses a first-class fluid dynamics, mechanical design, rubber formulation and process R&D team,
specializing in the development and application of mining equipment, molds, new materials and new technology. FLUENT/CFX and
EDEM softwares are used for pump hydraulic design while ANSYS software used for structure strength analysis. Naipu designs
products and molds with 3D softwares, and undertakes design of new products for clients home and abroad, including
manufacturing according to drawings and materials. Our 750NZJ slurry pumps, NX838 hydrocyclones, stators and impellers for
320m³ flotation machine and Φ3530×4805mm trommels, independently developed and manufactured by Naipu, are the first in
China and are also world-class products.
Aiming at the industrial development trend, Naipu persists in “Innovation of science and technology, product Innovation,
management Innovation and service Innovation”, believes in the management idea of “a leader in the industry and a winner by
quality”. Utmost efforts shall be made to serve our customers, and to manufacture high-efficient, energy-saving and environment-
friendly mining equipment.
Introduction
of NAIPU
Qualification
Tea
m
General ManagerBoard Chairman
Weekly Meeting Outward Bound Training
Sales
Network
ISO9001 ISO14001 OHSAS18001 State New Product
Certificate
3. 耐普矿机
NAIPU MINING MACHINERY
Jiangxi Naipu Mining is a manufacturer specializing in developing, manufacturing, distributing and servicing mining
equipment and spares. The company is accredited to ISO-9001:2008, ISO-14001:2004 and OHSAS 18001:2007. The company is
accredited to a domestic high-and-new-tech enterprise certification.
Naipu develops a variety of products, covering the mineral processing flows in non-ferrous metals, ferrous metals and
non-metals industries, with its main products as of slurry pumps and rubber wet ends, hydrocyclones, rubber mill liners and
trommels, rubber stators and impellers for flotation machines, rubber and polyurethane screen panels and plates, steel and rubber
composite pipes and hard-wall mining hoses. The Company also applies new polymer materials of rubber and polyurethane in the
manufacturing of mining equipment spares, resulting in higher abrasion and corrosion resistance performance and doubling their
service life than that of metal ones.
Naipu possesses a first-class fluid dynamics, mechanical design, rubber formulation and process R&D team,
specializing in the development and application of mining equipment, molds, new materials and new technology. FLUENT/CFX and
EDEM softwares are used for pump hydraulic design while ANSYS software used for structure strength analysis. Naipu designs
products and molds with 3D softwares, and undertakes design of new products for clients home and abroad, including
manufacturing according to drawings and materials. Our 750NZJ slurry pumps, NX838 hydrocyclones, stators and impellers for
320m³ flotation machine and Φ3530×4805mm trommels, independently developed and manufactured by Naipu, are the first in
China and are also world-class products.
Aiming at the industrial development trend, Naipu persists in “Innovation of science and technology, product Innovation,
management Innovation and service Innovation”, believes in the management idea of “a leader in the industry and a winner by
quality”. Utmost efforts shall be made to serve our customers, and to manufacture high-efficient, energy-saving and environment-
friendly mining equipment.
Introduction
of NAIPU
Qualification
Tea
m
General ManagerBoard Chairman
Weekly Meeting Outward Bound Training
Sales
Network
ISO9001 ISO14001 OHSAS18001 State New Product
Certificate
4. 耐普矿机
NAIPU MINING MACHINERY
Jiangxi Naipu Mining is a manufacturer specializing in developing, manufacturing, distributing and servicing mining
equipment and spares. The company is accredited to ISO-9001:2008, ISO-14001:2004 and OHSAS 18001:2007. The company is
accredited to a domestic high-and-new-tech enterprise certification.
Naipu develops a variety of products, covering the mineral processing flows in non-ferrous metals, ferrous metals and
non-metals industries, with its main products as of slurry pumps and rubber wet ends, hydrocyclones, rubber mill liners and
trommels, rubber stators and impellers for flotation machines, rubber and polyurethane screen panels and plates, steel and rubber
composite pipes and hard-wall mining hoses. The Company also applies new polymer materials of rubber and polyurethane in the
manufacturing of mining equipment spares, resulting in higher abrasion and corrosion resistance performance and doubling their
service life than that of metal ones.
Naipu possesses a first-class fluid dynamics, mechanical design, rubber formulation and process R&D team,
specializing in the development and application of mining equipment, molds, new materials and new technology. FLUENT/CFX and
EDEM softwares are used for pump hydraulic design while ANSYS software used for structure strength analysis. Naipu designs
products and molds with 3D softwares, and undertakes design of new products for clients home and abroad, including
manufacturing according to drawings and materials. Our 750NZJ slurry pumps, NX838 hydrocyclones, stators and impellers for
320m³ flotation machine and Φ3530×4805mm trommels, independently developed and manufactured by Naipu, are the first in
China and are also world-class products.
Aiming at the industrial development trend, Naipu persists in “Innovation of science and technology, product Innovation,
management Innovation and service Innovation”, believes in the management idea of “a leader in the industry and a winner by
quality”. Utmost efforts shall be made to serve our customers, and to manufacture high-efficient, energy-saving and environment-
friendly mining equipment.
Introduction
of NAIPU
Qualification
Tea
m
General ManagerBoard Chairman
Weekly Meeting Outward Bound Training
Sales
Network
ISO9001 ISO14001 OHSAS18001 State New Product
Certificate
5. 耐普矿机
NAIPU MINING MACHINERY
※ Hydrocyclones
Hydrocyclones are important classifiers in ore dressing
concentrators, especially for separating fines, and are also
applied in desliming, sand removing and thickening. With the
development of technology,cyclones are demanded in two
extremes: large diameter (high capacity) and small diameter
(separating fines).
I. φ838 Hydrocyclone -
Structure
Φ838 Hydrocyclone Cluster
II. Typical Application
Process
III. Typical case
Φ838-7 cyclone cluster on site
Φ500-6 cyclone cluster on site
O/F elbow
Feed machine
piece
Vortex finder
Middle cone2
Bottom cone
Apex
Feed chamber
Upper cone
Middle cone1
Splash-proof sleeve
O/F adaptor
Wear Resistant
Rubber Lining
Structure of a Single Cyclone
Polyurethane Lining
6. Distribution of Mill Spares
※ Mill Spares
Naipu, with R&D and tests conducted in the past many
years, has succesfully put into operation its rubber liners,
composite liners, and elastomer trommels on ball mills,
SAG mills and AG mills, with technical breakthrough
achieved as well. Naipu has stratigic cooperation
relationship and partnership with CITIC Heavy Industries
and some other large scale enterprises in China.
耐普矿机
NAIPU MINING MACHINERY
I. SAG Mill Liners
The change of liners is the most important factor affecting
the efficiency of SAG mill. In order to maximize service life of
liners and minimize of shutdown of SAG mill, Naipu Mining
successfully improve the usage of the SABC liners and win
customers’ appreciation after long time site research,
development and design, experiment.
1. Composite Liners
Composite liners and composite lifters are composed of
wear-resistant rubber and wear-resistant alloy through
special techniques, which have changed the phenomena
of cracks of the metal liners and leaks due to insufficient
torque of liner bolts. Naipu makes innovations not only on
materials , but also makes improvement on ways
Composite LiftersComposite Liners
2. Rubber Grate
Compared with metal grates, rubber grates have the
following advantages:
› Light in weight, easy assembly and disassembly.
› Abrasion resistant, service life is over 1.5 folds of that
of metal grates.
› No deformed apertures nor decreased opening area
due to impact of steel balls to affect pulp discharge.
› No opening blockage thanks to the elasticity of rubber.
› High Pricing/Performance Ratio.
Site Photo Site Photo
Rubber Grate Plate Products in Use
1. Rubber Liners
Discharger Cone
Pan Liner
Pan Liner
II. Ball Mill Spare Parts
LifterFE Assembly Liner
Head Liner
7. 耐普矿机
NAIPU MINING MACHINERY
III. Elastomer Trommel
Rubber-lined trommels manufactured by Naipu are of unique
structural design and performance, and are widely used on ball
mills and SAG mills.
1. Main Structure Type
2、主要结构形式的应用
Naipu designs trommels for clients based on their requirements to suit
their specific metallurgical conditions.
Cylindrical and conical trommels are for mill discharge classification,
removing coarse solids and scats, improving cyclone efficiency and
pump life.
Reverse spiral trommels are installed at grate mills and AG mills for
pre-classification, controlling feed size to the mill in the next stage.
Double-deck Character and Size Classifying Trommels both remove
coarse scats and control feed size to the mill in the next stage, as well
as return the middlings for regrinding.
3. Brief Refefence2. Rubber Magnetic
Liners
Rubber magnetic liners are mainly used on vertical mill,
with features of small size and light weight, easy
assembly and long service life.
Magnet on Backside
Rubber Magnetic Liners in VTM-800-WB
Wear-resistant
Rubber on Frontside
Conical TrommelReverse Spiral Trommel
Double-deck Character and
Size Classifying Trommel
Tromme
Mill Specs Trommel
Specs
Clients
Φ7.9X13.6m
Ball Mill
φ3530x4805mm Sino Iron, WA,
Australia
Φ
7.32X10.68m
Ball Mill
φ3000x3940mm DS Concentrator,
Dexing Copper, JCC,
China
Φ5.5X8.8m
Ball Mill
φ2300x3466mm VARGEM GRANDE,
Vale, Brasil
Φ7.32X12.5m
Ball Mill
φ3000x3305mm TaiSteel (Group)
Co., Ltd, China
Φ
9.15X5.03m
SAG Mill
φ3000x3605mm WLGT Mining,
China Gold Group,
China
Φ8.5X4.0m
SAG Mill
φ2300x3741mm DGS Conc, Tongling
Copper Group,
China
8. 130m3 Flotaton Machine
rotor and disperser
320m3 Flotaton Machine
rotor and disperser
耐普矿机
NAIPU MINING MACHINERY
※ Flotation Machine
Spares
NAIPU has long term tech cooperation with BGRIMM, jointly
researching and developing rotors, dispersers and other
rubber components for flotation machines.
Naipu produces rotors and dispersers on KYF type and XCF
type flotation machines, as well as on BS-K8 and some
other types, sizing 50m3 to 320m3.
Rotors and dispersers consist of metal skeleton and rubber
covering.
Major rotational component of rotor is tested for dynamic
balance, resulting in a reduced partial load and improved
stability during operation.
※ Vibrating Screen Spares
Compared with metal panels, rubber or polyurethane
ones have features as follows:
Light in weight, easy loading/unloading on site,
lessened labor intensity
High damping, lower noise
Good resilience, increasing bouncing frequency of
material, improving screening efiiciency
No blocked apertures
Thanks to abrasion resistance of rubber, aperture
sizing remains stable, thus screening precision is kept at
or over 90%.
2. Brief Reference
1. Product Structure
BS-K Flotation Machine
KYF Flotation Machine
9. 耐普矿机
NAIPU MINING MACHINERY
※ Rubber-lined Pipes
Rubber composite pipes produced by NAIU
are in two series of rubber-lined steel pipe
and mining hose.
I. Rubber-lined Steel Pipes
1. Features
1)Wide range of application
2)Super impact resistance
3)Wear resistance
4)Corrosion resistance
5)Long service life
6)Reusable
7)Easy installation and maintenance
II. Mining Hoses
1. Features
1)Reliability, impact resistance
2)Wide range of temperature, from -50 ~ 95°C
3)Abrasion and corrosion resistance, ageing resistance.
4)Anti static pressure, high tensile resistance
5)Slow scaling, energy saving, easy mounting
2. Brief Reference
2.Brief Reference
10. 耐普矿机
NAIPU MINING MACHINERY
※ Reference List of Clients
紫 金 矿 业丰 宁 鑫 源 矿 业
Erdenet Mining Co, Mongolia
Phase III, CONCEIÇÃO MINE, Vale, Brazil Australia - SKM
ОАО "ТЯЖМАШ",Uzbekistan
Saindak Cu/Au,Pakistan
MEGAMINE S.A,ChileOyu Tolgoi LLC,Mongolia
Peru Iron Mine,Peru
Sino Iron,WA, Australia
Сорский ферромолибденовый завод,Russia Chambishi Copper, Zambia
ME Elecmetal, Chile Sweden LKAB
Duratray In’l Pty,Australia Rocklands Copper Concentrator,Australia
Luanshya Copper ,Zambia
11. 耐普矿机
NAIPU MINING MACHINERY
Area of new factory under construction covers 25 acres, which is 3 folds of that of the
old factory.
Bird View of New
Factory
※ Enterprise Development
2008-2010
198.92 Mil.
2005-200746.28 Mil.
2011173.94 Mil.
2015
400.00 Mil.
2013203.66 Mil.
Sales Amount
12. 地址:江西省上饶经济开发区工业四路
Address:No.4 Industrial Rd.,Shangrao Economic Development Zone,Jiangxi, China
邮编/ZC:334100 网址/Web: www.naipumining.com
电话/TEL;0086-21-67268186
传真/FAX: 0086-21-62544619
Honest Cooperation Results in Win-Win