Exporting and supplying a range of automotive care products like engine carbon cleaner, lubricant spray, lubricating oil additives. These are used for various maintenance services in automotive industry such as Heavy Duty Release Lubricant, 20 ST Paste, Anti Seize Paste, Chuck Paste, Engine Clear Coat, Engine Oil Additives, Automotive Rubbing Compound..

1. Fine Engineering Specialty Lubricants
Oil | S i lt G | M i t SOils | Specialty Greases | Maintenance Sprays | P t | A ti C i Li ids | Pastes | Anti Corrosion Liquids

3. High Speed Bearing Greases
Product Field of Application Properties Appearance/Base
Code
R 880 Spindle bearings/ Highly water OffwhiteR‐880 Spindle bearings/ Highly water Offwhite
Sealed Bearings/ Resistant barium/
Textile Spindles Can withstand synthetic oil
temp upto 200°C
HS500 Spindle bearings/ Highly water OffwhiteHS500 Spindle bearings/ Highly water Offwhite
Sealed Bearings/ Resistant Lithium/
Textile Spindles synthetic oil
LM1991 Long term Lubrication Good load carrying Offwhite
for Metal to Metal capacity. PAO/Barium‐
and Metal to Plastics Lithium.
High speed vertical/
horizontal sliding
Movement in
CNC Machines.
CS11 Prolonged lubrication Highly water Red
metal ‐metal,sliding repellant lithium soap/
surfaces in CNC properties. synthetic oil
Machines.
for bearings operating
at moderate speed
and low loads
Technical Details Advantages/Benefits
OP temp: 50°C to +200° C Reduction of wear andOP. temp:‐50 C to +200 C Reduction of wear and
Drop Point : +245°C Prolonged Lubircation
D/N Factor :1000000
NLGI :2
Worked Penetration :265‐295
OP temp:‐60°C to +160° C Reduction of wear andOP. temp: 60 C to +160 C Reduction of wear and
Drop Point : +190°C Prolonged Lubircation
D/N Factor :1000000
NLGI :2
Worked Penetration :265‐295
OP. temp:‐30°C to +200° C Provides quiet operation
Drop Point : +225°C of the machine.
D/N Factor ‐
NLGI :2
Worked Penetration :265‐295
OP. temp:‐20°C to +130° C Reduces friction and wear.
Drop Point : +275°C Protects against rust
D/N Factor ‐ and corrosion.
NLGI :2
Worked Penetration :265‐295
water washout@ 80°C: 1.8%

4. Speed Bearing Greases
oduct Field of Application Properties Appearance/ Base
ode
SPL 48 Plain and antifriction Withstands extreme Blue
bearings. pressures at Special
elevated Synthetic Oil
Temperatures
LP2 F B i i G d L d i T lLP2 For Bearings operating Good Load carrying Translucent
under high loads and Capacity. Brownish
high temperature. Lithium/
refined oil
AS12 Bearing Grease Operates very Reddish Glint
Conveniently with Synthetic Blend
metals of several
Combination.
Preventing metal toPreventing metal to
Metal Contact
DK72 High Speed spindle Highly water Offwihite
bearing /textile resistant.g /
bearings.
Technical Details Advantages/Benefits
OP. temp:‐10°C to +230° C Highly resistant to Water.
Drop Point : +270°C Prevents corrosion.
D/N Factor : ‐‐‐ Compatible with all metals.
NLGI :2
Worked Penetration :265‐295
Water washout @80°C:
Completely resistant.
OP 35°C 185° C G d L d i iOP. temp:‐35°C to +185° C Good Load carrying capacity
Drop Point : +220°C Pumpable in Centralized
D/N Factor : ‐‐‐ Lubrication System.
NLGI :2
Worked Penetration :265‐295
OP. temp:‐10°C to +165° C Does not thin down/
Drop Point : +190°C squeezed out of the
D/N Factor ‐ Lubricating Area.
NLGI :2 reduces friction and
Worked Penetration :265‐295 wear.Worked Penetration :265 295 wear.
Water washout @80°C: 2% reduces down time /
Maintenance.
OP. temp:‐60°C to +160° C Quiet operations of the
Drop Point : +190°C machine.p
D/N Factor:80000
NLGI :1‐2
Worked Penetration :261

5. I.High Temperature Greases
.no Product Field of Application Properties Appearance/ Base
Code
1 R891 High temp grease for Doesnot carborize Black
furnace trolleys and Highly resistant to synthetic base
Bakery Machinery Oxidation.
2 89HC High temp grease for Doesnot carborize Black
furnace trolleys and Highly resistant to synthetic base
Bakery Machinery Oxidation.
3 AX141 Roller&PlainBearings Doesnot carborize White
operating atlowspeeds Highly resistant to Syntheticbase
&hi temps Oxidation.
4 PS90 Conveyor bearings in Doesnot carborize White
powder coating booths Highly resistant to synthetic base
Oxidation.
5 EM71 Lifetime lubrication High performance Yellowish
for metal/metal and and high special
Metal/Plastic sliding temperature synthetic oil.
Surfaces.bearings resistant grease.
operating at wide
i htemp range with
moderate load and
high speed electric
Motors.
Technical Details Advantages/Benefits
OP.temp:‐30°C +750°c Good Thermal Stability.
Drop Point‐+750c Can be used for bearings
D/N Factor : ‐‐‐ operating under high
NLGI :2 Vacuum.
Worked Penetration :265‐295
OP.temp:‐30°C +400°c ‐‐‐‐‐
Drop Point : +500°C
NLGI :2
worked Penetration :265‐295
OP.temp ‐30°c +300°c Good Thermal Stability with
Drop Point: 325°c squeezed out of the
NLGI :2 Extreme pressure properties
worked Penetration :265‐295
OP.Temp ‐30° +340°c Good Thermal Stability with
Drop Point:+385c squeezed out of the
NLGI :1‐2 Extreme pressure properties
Worked Penetration :261
OP.Temp ‐25 °c to +215°c Lifetime lubrication for
Drop Point:+235c metal to metal and metal to
NLGI :2 plastic sliding surfaces.
Worked Penetration :265‐295 protects against corrosion.
Water washout @80°C: 2.9%

6. High Temperature Greases
P d t Fi ld f A li ti P ti A /BProduct Field of Application Properties Appearance/Base
Code
6 synthetic Antifriction Bearings High performance Lithium /PAO
GB2 Life time lubrication grease with Red
of Gear Boxes excellent EP
subjected to Low to Properties.
Medium Speeds. Compatible with
mineral and
synthetic oils.
SP50 Plain and Antifriction Highly water Light Green.
Bearings. resistant with high Special
shear strength and Synthetic Oil
high load carrying
capacity.
8 EPR2 Bearings operating High Load Carrying Creamish
under high Load Capacity. Complex Soap/
for Vertical and Resistant to Hot Synthetic Oil
Horizontal Sliding and Cold water.
Lubrication in Press.
T h i l D t il Ad t /B fitTechnical Details Advantages/Benefits
OP.temp:‐50°C +225°c Good thermal
DROP point: Above 270°C stability with minimum
D/N Factor : ‐‐‐ maintenance.
NLGI :1.5
Worked Penetration :310
OP.temp:‐10°C +265°c Compatible with all metals
Drop point: 300°C Rubber and Plastics.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
Synthetic base oil
viscosity @40°C : 135 cst.
Water washout @80°C:
completely resistant
four ball EP Properties
Load wear index : 98Load wear index : 98
OP.temp:‐30°C to +180°c Can withstand shock loads
Drop point: 245°C and vibrations.Pumpable in
D/N Factor : ‐‐‐ Centralized Lubrication
NLGI :2 Systems.
Worked Penetration :265‐295

7. Temperature Greases
duct Field of Application Properties Appearance/Base
de
932 M High performance Good thermal Light Coloured
grease for roller stability with high Mineral/
bearings exposed to water resistance. synthetic oil and
high temperature. Polymer.
R850 T Universal Heavy duty Excellent EP Dark Grey
Mos2 grease for Ball/roller/ Properties. Lithium Soap/
Grease /needle /spherical Mineral Oil
bearings.
splined shafts/Gears/
threaded drive
spindle.
HTBL Roller and Plain High resistance to Brownish
Grease bearings operating at Oxidation.Does not synthetic
d S d d C b iModerate Speed and Carbonize.
Elevated
temperature.
LF211 Roller,Plain and Excellent hot and Green
Grease antifriction bearings cold water Lithium soapGrease antifriction bearings cold water Lithium soap
in screw compressors resistance. and synthetic
oil.
Technical Details Advantages/Benefits
OP.temp:‐30°C to +180°c Life time Lubrication
DROP point: 265°C of Electric Motor bearings
D/N Factor : ‐‐‐ and textile machinery
NLGI :2 bearings.
Worked Penetration :265‐295
OP.temp:‐30°C to +200°c Forms a solid lubricant film
Drop point: ‐‐‐‐ under heavy load application.
D/N Factor : ‐‐‐ minimises wear.
NLGI :2
Worked Penetration :265‐295
Water washout @80°C: 3.2%
OP.temp:‐20°C to +400°c Good thermal Stability
Drop point: 425° c
/D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
OP.temp:‐10°C to +230°c Compatible with all metals,
Drop point: 260° c Rubbers and PlasticsDrop point: 260 c Rubbers and Plastics.
D/N Factor : ‐‐‐
NLGI :3
Worked Penetration :265‐295
synthetic oil viscosity
40 c : 135 cst
water washout @ 80 c : 0.80%
four ball EP Property
Load wear index [ASTMD2596]
:94.

8. High Temperature Greases
o Product Field of Application Properties Appearance/Bas
C dCode
3 Poly U 61 Plain and Antifriction Good thermal Yellowish
Grease bearings. stability with high Special
water resistance. synthetic oil and
Polyurea.
e Technical Details Advantages/Benefits
OP.temp:‐25°C to +260°c Excellent extreme pressure
DROP point: 285°C Properties at elevated
D/N Factor : ‐‐‐ temperature.
NLGI :2
Worked Penetration :265‐295
Water washout @ 80 c :
Completely resistant.
four ball EP Property
Load wear index [ASTMD2596]
:98

9. III.Low Temperature Greases
S.no Product Field of Application Properties Appearance/Base
CodeCode
1 SAN‐LT Bearings used in Highly resistant to White
‐88 Conveyor and freezer Oxidation,Moisture Special Phenyl,
Cart Casters.Plastic to and corrosion. Methyl Silicones
Plastic and Metal to Chemically inert
Plastic Sliding movements. Grease.
2 OR‐8293 O Ring Lubricant Good Oxidation Biege to Pink.
Good Lubricant between resistance with good Silicone/Ester
Rubber and Metal Parts. thermal stability. Special Lithium
Soap.
3 302 Roller and Plain Bearings High Load Carrying Whitish
Synthetic Guides/Small Gears Capacity. Wide Synthetic Base
Grease and Cams. Operating temperature With Aluminium
range.Completely Complex and PTFE
Synthetic Oil Based
4 17 SE for bearings operating Excellent Load Amber
Grease under extreme Low carrying Synthetic Diester
temperature. capacity with hot oil/Micro Gel.
and cold water.
Technical Details Advantages/Benefits
OP.temp:‐75°C to +190°c Compatible with all plastics
DROP point: 240°C and Rubber.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :282
Water washout @80°C: Comp
letely Resistant
OP.temp:‐65°C to +180°c Compatible with Most Plastics.
Drop point: +230°C
D/N Factor : ‐‐‐
NLGI :1
Worked Penetration :300‐340
Water washout @80°C: 3.1%
OP.temp:‐45°C to +170°c Compatbile with many Plastics
Drop point: +280° c Elastomers and rubber.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
Oil Evaporation : 0.2
OP.temp:‐75°C to +160°c Good resistance to Hot and
Drop point: 275° c Cold water.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
Water washout @80°C: 0.80%

10. Low Temperature Greases
o Product Field of Application Properties Appearance/Bas
Code
5 Low Metal to Metal /Metal to Prolonged Off white
temp Plastic and Plastic Lubrication and Synthetic Oi,PTFE
Grease to plastic sliding corrosion resistance. Lithium soap.
application.
se Technical Details Advantages/Benefits
OP.temp:‐65°C to +165°c Quiet Operation of the
E, Drop point: 205°C machine.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
Water washout @80°C: Comp
l l R iletely Resistant

11. ater Resistant Greases
Product Field of Application Properties Appearance/BaseProduct Field of Application Properties Appearance/Base
Code
WR313 Bearings Operating Extremely water Dark Grey
under high speed repellant Syntheticunder high speed repellant Synthetic
and High Load.
21 Conveyor bearings in Withstands high Creamish
Water Bottling plant Paper temperature with SyntheticWater Bottling plant,Paper temperature with Synthetic
Resistant Industry. good corrosion
Grease resistance.
Technical Details Advantages/BenefitsTechnical Details Advantages/Benefits
OP.temp:‐30°C to +265°c Can Operate under Dusty
DROP point: 300°C Atmosphere Also can operateDROP point: 300 C Atmosphere.Also can operate
D/N Factor : ‐‐‐ under sea water and steam.
NLGI :2
Worked Penetration :282Worked Penetration :282
OP.temp:‐18°C to +200°c Good resistance to Hot and
Drop point: +230°C Cold WaterDrop point: +230 C Cold Water.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265 300Worked Penetration :265‐300
Water washout @80°C:
Completely resistant

12. d Processing /Pharma Industry Greases
Product Field of Application Properties Appearance/Base
CodeCode
R808 Lubrication of bearing, Compatible with White
FG Sliding Parts and Valves Plastics and rubber. Synthetic
l b i t St Pl Gl d i D t ll O Additilubricant Stems, Plug Glands in Does not swell O Additives.
Paste Pipeline. Ring.
R808 HT Lubrication of bearing Compatible with White
Food Sliding Parts and Valve Plastics and rubber. Synthetic
Grade Stems, Plug Glands in Does not swell O Additives.
lubricant Pipeline. Ring.
Paste
e Technical Details Advantages/Benefits
OP.temp:‐50°C to +200°c Tasteless,Odour free ,Non
DROP point: greater than 200°C toxic .Does not affect foamin
D/N F t P ti f BD/N Factor : ‐‐‐ Properties of Beer.
NLGI :2
Worked Penetration :265‐295
OP.temp:‐50°C to +285°c Tasteless,Odour free ,Non
DROP point: greater than 300°C toxic. Does not affect foami
D/N Factor : ‐‐‐ Properties of Beer.
NLGI :2
Worked Penetration :265‐295
Water washout @80°C:
Completely resistant

13. VI. Vacuum Greases
S.no Product Field of Application Properties Appearance/Ba
Code
1 R900 Packaging Grease Non toxic Milky white
SVP Waterline Valves and Silicon/Inorgan
Grease Open gears in paper Thickener.
industryindustry.
ase Technical Details Advantages/Benefits
OP.temp:‐40°C to +200°c Good water resistance.
ic DROP point: nil
D/N Factor : ‐‐‐
NLGI :2NLGI :2
Worked Penetration :265‐295

14. .Greases for Plastic Injection Moulding
dustry
Product Field of Application Properties Appearance/Base
Code
1 Premium Bearings operating Extreme Pressure Brown
EP‐O under high Load and High Load Lithium 12 Hydroxy
Grease Vertical and Horizontal Carrying Capacity. Stereate/ Refined
Sliding movements Mineral OilSliding movements. Mineral Oil.
2 Premium Bearings operating Extreme Pressure Brown
EP‐2 under high Load and High Load Lithium 12 Hydroxy
Grease Vertical and Horizontal Carrying Capacity. Stereate/ Refined
Sliding movements. Mineral Oil.
3 R2020 Thread Lubricant Paste High Load Carrying Copper Brown
Copper exposed to high Capacity. Good Micro fine
Antiseize temperatures. electrical conductivity. Copper Flakes in a
Paste Rack and Pinion Good resistance to Special Oil carrierPaste Rack and Pinion Good resistance to Special Oil carrier
arrangements exposed to Oxidation and and thickener.
marine atmosphere. corrosion.
Technical Details Advantages/Benefits
OP.temp:‐30°C to +170°c Resistant to Cold and Hot
DROP point: 210°C Water.Pumpable in centralized
D/N Factor : ‐‐‐ Lubrication system. Exceellent
NLGI :0 anticorrosion PropertiesNLGI :0 anticorrosion Properties.
Worked Penetration :355‐385
OP.temp:‐30°C to +180°c Resistant to Cold and Hot
Drop point: +225°C Water.Pumpable in centralized
D/N Factor : ‐‐‐ Lubrication system. Exceellent
NLGI :2 anticorrosion Properties.
Worked Penetration :265‐295
OP.temp:‐35°C to +1110°c Ideal Assembly Lubricant for
Density: 1.40 gms/cc threaded connections
D/N Factor : ‐‐‐ exposed to high temperatures
NLGI :2 and vibratory loads AvoidsNLGI :2 and vibratory loads.Avoids
unWorked Penetration :260‐300 Seizing and sintering of
Coverage :40 mts sq per Kg threaded connections.

15. VIII .Greases for Printing
Industry
S.no Product Field of Application Properties Appearance/Base
Code
1 AS12 Bearing Grease Operates very Reddish Glint
Conveniently with Synthetic Blend
metals of several
Combination.
Preventing metal to
Metal Contact
2 LP2 For Bearings operating Good Load carrying Translucent
under high loads and Capacity. Brownish
high temperature. Lithium/
refined oil
3 MX For plain and Grease does not Reddish
grease antifriction bearings get thrown off Special Synthetic Oil/
or drip during PTFE.
operation.Highly
Water resistant
4 SPL 48 plain and antifriction withstands extreme Blue
bearings pressures at Specialbearings. pressures at Special
elevated Synthetic Oil
Temperatures
Technical Details Advantages/Benefits
OP. temp:‐10°C to +165° C Does not thin down/
Drop Point : +190°C squeezed out of the
D/N Factor ‐ Lubricating Area.
NLGI :2 reduces friction and
Worked Penetration :265‐295 wear.
Water washout @80°C: 2% reduces down time /
M i tMaintenance.
OP. temp:‐35°C to +185° C Good Load carrying capacity
Drop Point : +220°C Pumpable in Centralized
D/N Factor : ‐‐‐ Lubrication System.
NLGI :2
Worked Penetration :265‐295
OP. temp:‐25°C to +200° C Reduces friction and wear.
/ Drop Point : +240°C
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
Water washout @80°C:
Completely water resistant
OP. temp:‐10°C to +230° C Highly resistant to Water.
Drop Point : +270°C Prevents corrosionDrop Point : +270 C Prevents corrosion.
D/N Factor : ‐‐‐ Compatible with all metals.
NLGI :2
Worked Penetration :265‐295
Water washout @80°C:
Completely resistant.

16. I .Greases for Printing
dustry
Product Field of Application Properties Appearance/Base
Code
5 PGL 55 Lubrication of small Excellent Greyish Black
to large size gears, corrosion Synthetic
subjected to heavy Protection and
loads and high Bitumen free.
circumferential
speeds.
6 NPL6 Bearings Operating Highly resistant Creamish
Under High Loads to hot and cold Special Lithium/
water Synthetic Oily
7 LFP16 Guideway Lubrication High Load Brownish
and Conveyor chain Carrying Lithium Soap/and Conveyor chain Carrying Lithium Soap/
bearing Lubrication Capacity Mineral Oil
8 KL OOO Lubrication of Track Heavy duty Creamish
Rollers ,Rack and tacky lubricant Synthetic
Pinion and with friction
Conveyor chain modifiers,anti
Bearings wear and extreme
pressure.
Technical Details Advantages/Benefits
OP. temp:‐30°C to +220° C Provides excellent film
Drop Point : +245°C on gear surfaces.
D/N Factor : ‐‐‐ avoiding wear and pitting
NLGI :2 of tooth flanks.
Worked Penetration :280‐300 Grease does not get thrown
off during operation.
OP. temp:‐15°C to +160° C Good Load Carrying
Drop Point : +200°C Capacity and excellent
D/N Factor : ‐‐‐ corrosion Protection./
NLGI :2
Worked Penetration :265‐295
OP. temp:‐30°C to +115° C Can be used in
Drop Point :n a Centralized LubricationDrop Point :n.a. Centralized Lubrication
Density @20°C : 0.95 System.
OP. temp:‐10°C to +170° C Provides quiet
Drop Point : N.A. operation of the machine.
D/N Factor : ‐‐‐ Grease does not drip down
NLGI : OOO can be easily applied thru
Worked Penetration :430‐470 brush.Suitable for
Water washout @80°C: 0.4 centralized Lubrication
system.

17. /X .Greases for Heavy Engineering /Construction
ndustry
no Product Field of Application Properties Appearance/Base
Code
1 HDEP2 Bearings operating Heavy load dark greyg p g y g y
under heavy load. carrying capacity lithium 12 hydroxy ‐
For vertical and excellent shock stereate/ refined
Horizontal sliding load absorption mineral oil.
applications. capacity.
2 Chisel Lubrication of wear Heavy load Copper Brown
Paste bushes in pneumatic carrying capacity Nano Copper base
hydraulic hammers excellent shock
[Rock Breakers] load absorption
capacity.
3 TXL2 Bearings Operating Heavy load Brownish red
under high vibrating carrying capacity lithium 12 hydroxy ‐
loads.Lubrication of excellent shock stereate/ refined
spider bearing block load absorption mineral oil.
i h it i t tin cone crushers. capacity.resistant
to hot and cold
water.
4 HTK Kiln Lubrication for Good thermal Brownish
Grease slip seal application stability with Lithium complex/Grease slip seal application stability with Lithium complex/
in Sponge Iron Plants extreme pressure Special Mineral Oil.
properties.
Technical Details Advantages/Benefits
OP. temp:‐30°C to +180° C Provides Prolongedp g
Drop Point : +225°C Lubrication.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
OP. temp:‐20°C to +1110° C forms a thin film on the
Drop Point : N.A. surfaces and prevents
NLGI : 2 fretting corrosion.
Worked Penetration :310‐320
OP. temp:‐30°C to +245° C Used in Centralized
Drop Point : +275°C Lubrication system.
D/N Factor : ‐‐‐
NLGI :2
W k d P t ti 265 295Worked Penetration :265‐295
OP. temp:‐20°C to +400° C Resists Oxidation and does
Drop Point : None not carbonize.Drop Point : None not carbonize.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295

18. X .Gear Box Greases
S.no Product Field of Application Properties Appearance/Ba
Code
1 Synthetic Life time lubrication Good thermal Dark Grey
GBL‐O of gear boxes stability and Lithium ,Solid
Special subjected to low to protects against Lubricants and P
grease medium speeds corrosiongrease medium speeds. corrosion.
conveyor gear boxes.
2 Synth Lubrication of Good thermal Brownish
GL‐OO Planetary Gear Boxes stability and Lithium/PAO
Grease protects against
corrosion.
3 Open Small to Large Sized Excellent Greyish Black
Gear Gears Subject to corrosion SyntheticGear Gears Subject to corrosion Synthetic
Grease Heavy Load and high Protection.
Circumferential
speed transport
cables and Wire rope.
ase Technical Details Advantages/Benefits
OP. temp:‐50°C to +170° C Compatible with mineral
Drop Point : +195°C and synthetic Oil.Minimises
PAO. D/N Factor : ‐‐‐ Leakages.Reduces Gear
NLGI :O WearNLGI :O Wear.
Worked Penetration :355‐385
OP. temp:‐50°C to +200° C Compatible with mineral
Drop Point : +250°C and synthetic Oil.Minimises
D/N Factor : ‐‐‐ Leakages.
NLGI :OO Reduces Gear Wear.
Worked Penetration :+412°c
OP. temp:‐30°C to +220° C Provides excellent film on the
Drop Point : +245°C gear surface and avoids pittingDrop Point : +245 C gear surface and avoids pitting
D/N Factor : ‐‐‐ and waer. Grease does not
NLGI :2 get thrown off during
Worked Penetration :280‐300 Operation.

19. .Special Grease for Industrial Applications: A.LM Guideways/
rew
Product Field of Application Properties Appearance/Base
Code
PS40 Lubrication of LM Execllent water Creamish
Grease guides in electronics repellancy. Synthetic oil with
and precision Special Additives
Industry.
GBKOO Suitable for Gear Box Excellent anti wear Dark brownGBKOO Suitable for Gear Box Excellent anti wear Dark brown
[Spur,bevel and worm and corrosion lithium soap/ mineral
gear and toothed resistance. oil/Silicate.
coupling] free from solid
Lubrication of rams/ lubricants.
guides in mechanical
presses.
LM 1095 Life time lubrication Good corrosion Offwhite
of Metal ‐metal, resistance. synthetic oil,barium/
Metal to plastic Lithium Complex with
sliding surfaces special additives.
Bearings operating atBearings operating at
Moderately high
speed and high load.
SL899 Lubrication of all High Load Beige
types of bearings/ carrying capacity synthetic oil /refined
LM Guides operating mineral oil
under high load and special calcium soap
tough conditions in
textile/Paper/
Electrical Motors
/Ball
Technical Details Advantages/Benefits
OP. temp:‐45°C to +160° C Longer relubrication
Drop Point : +205°C periods.
D/N Factor : ‐‐‐
NLGI :1
Worked Penetration :310‐340
Water washout @80°C: 0.80%
OP temp 30°C to +180° C Good wetting characteristicsOP. temp:‐30°C to +180° C Good wetting characteristics
Drop Point : none
D/N Factor : ‐‐‐
NLGI :OO
Worked Penetration : nil
Water washout @80°C:
Completely resistant
OP. temp:‐30°C to +160° C Reduction of wear and
Drop Point : +195°C Prolonged Lubrication
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265 295Worked Penetration :265‐295
Water washout @80°C: 1.20
OP. temp:‐35°C to +150° C Life time lubrication
Drop Point : +200C of bearings.
D/N Factor : ‐‐‐
NLGI :2

20. .Special Grease for Industrial Applications:
o Product Field of Application Properties Appearance/Base
Code
5 EP2 Bearing operating Excellent load Brownish5 EP2 Bearing operating Excellent load Brownish
Special under high loads carrying capacity Lithium 12 hydroxy
vertical and horizontal resistant to hot stereate /mineral o
sliding movements. and cold water.
6 GYOOO LM Guides and Reduction of wear Yellowish
ball screw in CNC Prolonged Synthetic Blend
Milling machine Lubrication and
good wetting
Properties.
7 Synthetic LM Guides and Excellent EP Red
GBOO ball screw in CNC Properties Lithium Thickeners/
Milling machine PAO
Technical Details Advantages/Benefits
OP temp:‐30°C to +180° C Pumpable in centralizedOP. temp: 30 C to +180 C Pumpable in centralized
Drop Point : +225 c lubrication system.
il D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295
OP. temp:‐10°C to +150° C Forms a thin lubricant film
Drop Point : nil on the metal surfaces.
D/N Factor : ‐‐‐ Grease does not drip down.
NLGI :OOO
Worked Penetration :430‐470
Water washout @80°C:0.5
OP. temp:‐50°C to +210° C Compatible with mineral
/ Drop Point : +250 c and synthetic Oil.
/D/N Factor : ‐‐‐ Good thermal stability.
NLGI :OO
Worked Penetration :412

21. Special Grease for Industrial Applications: B Vertical Guidew.Special Grease for Industrial Applications: B. Vertical Guidew
Product Field of Application Properties Appearance/Base
Code
1 DE150 Vertical centre Extreme Pressure Yellow
Punch in turret and good shock Lithium 12 hydroxy
press brake. Load resistance. stereate/synthetic oil.
rack and pinion
movements.
Bushes,threaded
joints
2 LMS2 Life time Lubrication Reduction of Beige
of Metal to Metal wear and Synthetic oil/
Metal to Plastic Prolonged Barium Complex with
Surfaces in CNC Lubrication Special Additives.
Machines.
Bearings operating
under high speed
and high load
3 HTVP2 Life time Lubrication Non melting Dark Grey
of Metal to Metal grease Synthetic oil/Mos2
Metal to Plastic
Surfaces in CNC
Machines.
Bearings operating
under high speed
and high load
waysways
Technical Details Advantages/Benefits
OP. temp:‐30°C to +170° C Can operate over a wide
Drop Point : +220°C temperature range.
D/N Factor : ‐‐‐
NLGI :1
Worked Penetration :230‐260
OP. temp:‐30°C to +165° C Quiet operation of
Drop Point : +195 C the machine.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration : 265‐295
Water washout @80°C: 1.20
OP. temp:‐30°C to +300 C Pumpable in Centralized
Drop Point : None Lubrication System.
D/N Factor : ‐‐‐
NLGI :2
Worked Penetration :265‐295

22. XI .Special Grease for Industrial Applications: B. Vertical Gu
S.no Product Field of Application Properties Appearance/B
Code
4 HPHS Life time Lubrication Reduction of creamish
of Metal to Metal wear with Synthetic Oil/L
and Metal to Plastic good corrosion Soap.
and Plastic to Plastic protection
Sliding Surfaces Properties
uideways
Base Technical Details Advantages/Benefits
OP. temp:‐45°C to +280° C Prolonged Lubrication.
Lithium Drop Point : +280°C
D/N Factor : ‐‐‐
NLGI :1
Worked Penetration :310‐340
Water washout @80°C: 3.20

23. XI .Special Grease for Industrial Applications: C.Turret Lubrica
.no Product Field of Application Properties Appearance/Base
Code
1 LFP16 Roller and Plain High Load Brownsih
Bearings/Guideways. CarryingCapacity Mineral Oil/Lithiu
Soap
2 Premium Bearings under high Good shock load Translucent brow
AW2 Load.Vertical and and vibrating Lithium 12 hydro
horizontal Lubrication Load carrying stereate/syntheti
capacity Oil
ation
e Technical Details Advantages/Benefits
OP. temp:‐30°C to +115° C Good anti wear and Corrosion
um Density @20° C :0.95 resistance.
D/N Factor : ‐‐‐
wnish OP. temp:‐30°C to +190° C Resistant to hot and cold
xy Drop Point : +225C water.Pumpable in
ic D/N Factor : ‐‐‐ centralized Lubrication
NLGI :2 system.

24. .Special Grease for Industrial Applications: D.Hotforging Lub
o Product Field of Application Properties Appearance/Base
Code
1 HW86 Hot forging die Odourless Black
Lubricant/Precision Smokeless Micrographite
forging. Homogenous carrier ‐water
Mixture with
no sedimentation
in concentrate.
ricant
e Technical Details Advantages/Benefits
Ph :11 Provides high lubricity
density : 1.1kg /Litre and release for Difficult
Press Operation including
hot/Precision forgings.

25. .Special Grease for Industrial Applications:Automotive Indus
Product Field of Application Properties Appearance/Base
Code
SR551 Brake Drum assembly Extremely water Red
Grease in 3/4 wheeler repellant Lithium Complex/
Synthetic Oil
Caliper Lubrication of sliding High temperature Red
Pin surfaces,pin,bearings resistance and
Grease operating at waterGrease operating at water
moderate speed. repellancy
pins and guides of
moulding machines
LAP‐O Lubrication between High Load Creamish
l / l h / lGrease elastomers/Metal carrying capacity synthetic/Spl
Metal to Metal , with good Lithium Soap
Plastic to Plastic water resistance
sliding surfaces.
assembly grease for
Plain Bearings and
for Linear motion in
brake and clutch
where it comes in
contact with Dot3,4
and 5 brake fluid.
stry
Technical Details Advantages/Benefits
OP. temp:‐25°C to +200° C Does not thin and squeeze out
Drop Point : +250°C of the lubricated area.
D/N Factor : ‐‐‐ Operates conveniently with
NLGI :2 metals of several
Worked Penetration :265‐295 combinations,thereby
Water washout @80°C: 0.4 preventing metal to metal
contact.
OP. temp:‐45°C to +210° C Good lubrication properties.
Drop Point : nil
D/N Factor : ‐‐‐D/N Factor :
NLGI :2
Worked Penetration : 265‐295
OP. temp:‐45°C to +200 C Good antiwear and
dhDrop Point : +240 C adhesion properties.
D/N Factor : ‐‐‐
NLGI :O
Worked Penetration :355‐385

26. S i l G f I d t i l A li ti A t ti I d.Special Grease for Industrial Applications: Automotive Indu
Product Field of Application Properties Appearance/Base
Code
4 87 MO Life time lubrication Good hot and Brown transparent
Grease of metal to metal , cold water Mineral Oil/Lithium
l l i d i SMetal to Plastic and resistance Soap
Plastic to Plastic good wetting and
Sliding and rotary excellent shear
Motion. strength.
Lubrication of small
gears,Plain and g
roller bearings.
SAN‐LT‐ Lubrication of anti Chemically inert White
88 friction bearings resists to oxidation Lithium soap/Special
Grease Life time lubrication moisture and Phenyl,methyl
of metal to metal , corrosion silicones.
Metal to Plastic and
Plastic to Plastic
Sliding and rotary
Motion.
Lubrication of clutchLubrication of clutch
cable assembly
6 3132 Lubrication of over Long term White
grease running clutch in Lubrication
starter motor.
lubrication of bearing
and sliding parts of
process filling
machines.
tstry
Technical Details Advantages/Benefits
OP. temp:‐40°C to +140° C Compatible with all
Drop Point : +165°C Plastics,Rubber and metals.
/D/N Factor : ‐‐‐
NLGI :1
Worked Penetration :310‐340
Water washout @80°C:
Completely resistant.
OP. temp:‐75°C to +190° C Compatbile with plastics
Drop Point :+240 C and rubber.
D/N Factor : ‐‐‐ designed to operate at
NLGI :2 extreme low temperatures.
Worked Penetration : 265‐295
Water washout @80°C:
Completely resistant.
OP. temp:‐40°C to +180° C Compatible with
Drop Point :+200 C rubber and plastics.Does not
D/N Factor : ‐‐‐ swell O Rings.
NLGI :2 Prevents embrittlement of
Worked Penetration : 265‐295 rubber and plastics.

27. .Special Grease for Industrial Applications:Textile Industry
Product Field of Application Properties Appearance/Base
Code
1 SR491 Bearings and Sliding Reduces friction Red
Grease Applications/CAM and wear. Lithium Complex/
Lubrication in Synthetic Oil.
Quilting Machine.
2 ALK1000 Open Girth Gear Good adhesion Brownish
Grease Drives.Specially properties. Special Mineral Oil
used in printing and
weaving machines.
3 LFP16 Guideway Lubrication High Load Brownish
and Conveyor chain Carrying Lithium Soap/
bearing Lubrication Capacity Mineral Oil
4 R‐880 Spindle bearings/ Highly water Offwhite
Sealed Bearings/ Resistant barium/Sealed Bearings/ Resistant barium/
Textile Spindles Can withstand synthetic oil
temp upto 200°C
5 HS500 Spindle bearings/ Highly water Offwhite
Sealed Bearings/ Resistant Lithium/
Textile Spindles synthetic oil
Technical Details Advantages/Benefits
OP. temp:‐10°C to +210° C Reduces downtime/
Drop Point : +270°C maintenance.
D/N Factor : ‐‐‐ does not thin down or
NLGI :1 squeeze out of lubricating
Worked Penetration :310‐340 area.
Water washout @80°C: 0.40
OP. temp:‐10°C to +110° C Can be used in
Drop Point : nil centralized Lubrication
density @20°C : 0.92 gms/cc3 systems.
OP. temp:‐30°C to +115° C Can be used in
Drop Point :n.a. Centralized Lubrication
Density @20°C : 0.95 System.
OP. temp:‐50°C to +200° C Reduction of wear and
Drop Point : +245°C Prolonged LubircationDrop Point : 245 C Prolonged Lubircation
D/N Factor :1000000
NLGI :2
Worked Penetration :265‐295
OP. temp:‐60°C to +160° C Reduction of wear and
Drop Point : +190°C Prolonged Lubircation
D/N Factor :1000000
NLGI :2
Worked Penetration :265‐295

28. OILS ‐synthetic Gear Oil
Product Field of Application Properties Appearance/Base
Code Lubrication of Heavy
Synthetic duty manual Reducsed friction Pale transparent
Gear transmission and and wear at PAO
Box Oil rear axles. high temperature
320 and heavy loads
1 Synthetic Duty manual Reduces friction Red
Gear transmission and and wear at PAO
Box Oil rear axles high temperatureBox Oil rear axles. high temperature
220 and heavy loads
Technical Details Advantages/Benefits
ISO Viscosity Good Foaming behaviour
grade :320 Compatbile with non
ASTM0‐445 ferrous metal
viscosity @40 c :320 cst
viscosity @100 c :45 cst
Pour point C : ‐38 C
ASTMD‐97
Flash point : 290 C
ASTM D‐92
Density @ 20 C : 1.15
ASTM4052
ISO Viscosity Good Foaming behaviour
grade :220 Compatbile with non
ASTM0 445 ferrous metalASTM0‐445 ferrous metal
viscosity @40 c :220 cst
viscosity @100 c :45 cst
Pour point C : ‐38 C
ASTMD‐97
Flash point : 260 CFlash point : 260 C
ASTM D‐92
Density @ 20 C : 1.05
ASTM4052

29. OILS ‐Gear Box Oils
o Product Field of Application Properties Appearance/Base
Code Lubrication of Heavy
1 Synthetic Duty manual Reduces friction Red
Gear transmission and and wear at PAO
Box Oil rear axles. high temperature
150 and heavy loads150 and heavy loads
e Technical Details Advantages/Benefits
ISO Viscosity Good Foaming behaviour
grade :152 Compatbile with non
ASTM0‐445 ferrous metal
viscosity @40 c :150 cstviscosity @40 c :150 cst
viscosity @100 c :45 cst
Pour point C : ‐38 C
ASTMD‐97
Flash point : 260 C
ASTM D‐92
Density @ 20 C : 1.05
ASTM4052S 05

30. OILS ‐High temperature Conveyor chain Oil
o Product Field of Application Properties Appearance/Basepp p pp /
Code Lubrication of Heavy
1 HTC Internal and external Excellent thermal Transpareny
High lubrication of roller resistance at
h d b l dtemp chains and bearings elevated
chain in furnace conveyors, temperatures.
oil Paint booth conveyors
and powder coating
conveyors.
2 HTEP‐3 Internal and external Excellent thermal Bluish
Oil lubrication of roller resistance at Ester/AdditivesOil lubrication of roller resistance at Ester/Additives
chains and bearings elevated
in furnace conveyors, temperatures.
Paint booth conveyors
and powder coating
conveyors.
Technical Details Advantages/Benefitsg /
Density @ 27 C :0.98 gm/cc Can be used in automatic
Viscosity @ 40C : 148 cst dispensing system.
l hFlash Point : 325
Operating temp: ‐20 to +300 C
Density @ 27 C :0.98 gm/cc Can be used in automatic
Viscosity @ 40C : 362 cst dispensing systemViscosity @ 40C : 362 cst dispensing system.
Flash Point : 285 Lubricant does not carbonize
Operating temp: ‐10 to +240 C

31. ILS F d G d OilILS ‐Food Grade Oils
Product Field of Application Properties Appearance/Base
Code Lubrication of Heavy
R‐808 Lubrication of roller Good thermal Amber
FG chains and bearings stability.
High in food processing
temp units
chainchain
Oil
food Lubrication of gear Resistant to cold Red
grade boxes in food Process and hot water
gear ing and packaging
oil industry.
Technical Details Advantages/Benefits
Density @ 27 C :0.98 gm/cc Can be applied by automatic
Viscosity @ 40C : 220 cst spraying system.
Flash Point : 325
Operating temp: ‐20 to +300 C
Viscosity @ 40C :175 cst Prolonged relubrication
Flash Point :245 periods upto 3 months.
Pour point :‐10 C
Evaporation loss
at 200 C,1 hour : 4%,

32. OILS ‐Synthetic Compressor
l
Product Field of Application Properties Appearance/Base
Code
Complub Aircompressor Low ash and Transparent Pale
SL46 Lubricant. carbon formation. Liquid.
excellent water
repellancy.
OILS ‐Vacuum Pump Oil
Product Field of Application Properties Appearance/Base
Code
Food Vacuum pumps Low vapour Water white
grade operating at high and pressure.Low
vacuum low temperatures. Sludge deposits
Pump
Oil 65Oil 65
OILS ‐Tapping Oil
Product Field of Application Properties Appearance/Base
Code
synthetic For tapping of Good antiwear Brown Amber
tapping MS/SS/Copper/Nickel and antirust Synthetic
oil Chrome metals. Lubricant.
Technical Details Advantages/Benefits
Viscosity @40C : 105 cst Longer Oil and filter Life.
Sulphated Ash weight% : less reduces wear of rings and
than 0.01 cylinders.
flash Point: 270
Density@ 15 C : 0.86
Technical Details Advantages/Benefits
Operating temp: ‐50 C to +260C Resists emulsion formation.
Viscosity @ 40C : 61 cst Good antirust properties.
Flash Point : 290 C
Technical Details Advantages/Benefits
Specific gravity : 0.93 gm/cc at Smooth tapping with
25 C sharp thread profiles.
Flash Point : 145 Increases the tap life.
Pour point : ‐10

33. stes
Product Field of Application Properties Appearance/Base
Code
R2020 Threaded connections High load carrying Copper BrownR2020 Threaded connections High load carrying Copper Brown
Anti on Turbine/Gas capacity,Good
seize generators and engine electrical
paste heads,steam lines conductivity.
Rack and Pinion resists oxidation
arrange ments and corrosion.
exposed to marineexposed to marine
atmosphere.
VP38 Lubrication of chucks/ High load carrying Dark grey
collets in pipe bending capacity, Homogenous mixture
drawing, press resists oxidation of fine Mos2 powderg, p p
fitting machine. and corrosion. ,graded solid
lubricants in
synthetic Oils
R‐25 Lubrication of Long term Off white
Chuck pneumatic chucks in Lubrication. synthetic/Lithium p y /
Paste CNC Machines. Avoids fretting Hydroxy stereate.
corrosion.
R422 Standard Antiseize Smooth dismant Dull black
Assembly Lubricant for all ling of Homogenous Mixture
Paste Production and assemblies. of micro fine Mos2
repair works. Powder, graded solid
press fittings of wheel lubricants in synthetic
bearings,Threaded oils.
spindles.
Technical Details Advantages/Benefits
Density : 1 4 gm/cc Keeps the threads separatedDensity : 1.4 gm/cc Keeps the threads separated
NLGI:2 even after exposure to
Operating temp: ‐35 to +1100 C high temperature, water,
Coverage : 40 sqm /Kg sea water thereby avoiding
seizing and sintering of
threads.
Density : 1.1 gm/cc Resists water ,Oil and
NLGI:1 Most chemicals.
Operating temp: ‐35 to +280 Cp g p
Coverage : 45 sqm /Kg
unworked penetration : 230‐260
Worked Penetration : 265‐290 Resisits water,Coolant and
Operating temp: ‐40 to+130 C steam.p g p
Drop point ; 165
NLGI:2
Density: 1.5 gm/CC Resists water oil and
unworked most chemicals.
penetration : 260‐300p
NLGI :2
operating temp; ‐35 to +450 C
Coverage ; 45 sqmtr /Kg

34. stes
Product Field of Application Properties Appearance/Base
Code
AL611 Lubrication of Good anti Grey
Valves,Spindles ,tool corrosion properties special mineral oil/, p , p p p /
holders. with excellent barium complex.
resistance to
hot and cold
water.
6 44 C Lubrication of door Improves sliding White
Grease locking systems,spring properties of synthetic base
movements,cables Plastic, elastomers
,small gears. steel and non
ferrous metals
excelent low
temp behaviourtemp behaviour.
5050 Lubrication of threaded High Load Blackish graphite/
antiseize connections in carrying Copper.
paste turbine,gas capacity and
generators,engine good
heads. corrosion
resistance.
8 R1020 Good Lubricant for Resists water ,Oil Dull black
MS Press fitting and and Most chemicalsMS Press fitting and and Most chemicals
Assemlby priming.
Paste
Technical Details Advantages/Benefits
Operating temp: ‐20 to +170 C Protects against tribo
NLGI:2 corrosion.
Drop point: 225
Worked Penetration :265‐295
Operating temp: ‐50 to +150 C Good corrosion and
NLGI:1 water resistance.
Drop point: 190
Density: 1.35 gm/cc Avoids seizing and sintering of
Unworked Penetration : 260‐300 threaded connections at
NLGI:2 high temperature.
Operating temp; ‐35 to +1100 Makes dismantling easy.
Coverage ; 40 sqmtr/Kg
Density: 1.50 gm/cc Prolonged lubrication.
Unworked Penetration : 265‐300Unworked Penetration : 265 300
NLGI:2
Operating temp; ‐35 to +450
Coverage: 45 sqmtr/Kg

35. stes
o Product Field of Application Properties Appearance/Base
Code
9 LF208 Threaded connections Extremely water Yellowish brown past
exposed to high temp resistant.
and sea water.
0 Zn High pressure Good water Off white
Assembly Lubricant for rack and resistance. micro zinc oxide in
Paste Pinion. special napthenic oil
Threaded joints on carrier along with
turbine,gas calcium hydroxied an
generators ,engine additives.
heads,wind shield ,
and wipers.
1 Chisel Lubrication of threaded Excellent Load Copper Brown
Paste connections/wearing carrying capacity Nano copper basedPaste connections/wearing carrying capacity Nano copper based
bushes in hydraulic with good thermal synthetic additives.
rock breakers. stability.
Technical Details Advantages/Benefits
e Density: 1.3 gm/cc Resists corrosion and
unworked penetration : 260‐300 oxidation.
NLGI:2
Operating temp: ‐35 to+245 C
Density: 1.3 gm/cc Good assembly Lubricant.
unworked penetration : 235‐260
NLGI:1
Operating temp: ‐55 to+300C
d Coverage |: 45 sqmtr/Kg
Operating temp: ‐20 to +1100 C Avoids seizure of threaded
NLGI:2 connectionsNLGI:2 connections.
Worked Penetration :310‐320 Prolonged Lubrication at
Resistance to Water : 1 ‐90 extreme temperatures.

36. rays
Product Field of Application Properties Appearance/Base
Code
R720 Easy and Quick Displaces Moisture Light Coloured
Multi dismantling of seized and eliminates Mineral Oil
Action corroded screws,bolts sqeaking noices.
Spray joints ,lever, valves Good anticorrosion
etc. Properties and
also acts as a
Lubricant.
R841 Lubrication of roller Good thermal Black
High chains,conveyor resistance.
Temp chains in furnace/
chain Painting boothchain Painting booth.
Spray
R1003 Dry Lubricant for Good antifriction White
Ptfe lubrication of and antiwear Highly purified PTFE/
Bonded guideways,joints/ properties. Inorganic Binders
coating sliding surfaces of
Spray earth moving
equipments.
R100 Dry Lubricant for Good antifriction Greyish Black
M 2 l b i ti f d ti P M 2 P d /Mos2 lubrication of and antiwear Pure Mos2 Powder/
bonded guideways,joints/ properties. Inorganic Binders
coating sliding surfaces of
spray earth moving
equipments.
Technical Details Advantages/Benefits
Op temp: ‐30 to 160 C Extremely high
Flash Point : 85C penetration.
Density @ 27 C : 0.95 gm/cc Provides Prolonged
Viscosity @ 40C : 140 Lubrication of chains
Flash Point : None operating under elevated
Operating temp: 20 to 800 C temperatureOperating temp: ‐20 to 800 C temperature
Operating temp; ‐70 to +250 C Good adhesion to metal
Curing time: 6‐7 mins at surfaces.
room temperature.
Coating thick ness : 8‐17 microns
Op temp: ‐100 to 450 C Good adhesion to metal
C ti thi k 7 15 i fCoating thickness : 7‐15 microns surfaces.
Curing time: 5 mins @ room
temperature.

37. rays
Product Field of Application Properties Appearance/Base
Code
R100 Dry Lubricant for Good antifriction Greyish Black
Mos2 lubrication of and antiwear Pure Mos2 Powder/
bonded guideways,joints/ properties. Inorganic Binders
coating sliding surfaces of
spray earth moving
equipments.
Corrosi Protects highly Good adhesion Transparent dry film
on grounded machine resists sultry
protection surfaces against environment
spray corrosion. .gives corrosion
Protection upto
24 months.
R750 HD Protects highly Good adhesion Green/White wet film.
CP Spray grounded machine resists sultry
surfaces against environment
corrosion of Mould .gives corrosion
cavities,bearing Protection upto
races etc 24 months.
Ideal for assembly
of components.
R760 Protects metals like Good protection Light beige.
Hi temp steel,aluminium, against thermal
bonded cast iron ,zinc corrosion.
coating against thermal
spray Corrosion
Technical Details Advantages/Benefits
Op temp: ‐100 to 450 C Good adhesion to metal
Caoting thickness : 7‐15 microns surfaces.
Curing time: 5 mins @ room
temperature.
Op temp: ‐20 to 90 C Suitable for ferrous and
non ferrous metal.
Curing time: 7 mins @ room does not affect most rubbers
temperature. and plastics.
Op temp: ‐40 to 85 C Suitable for ferrous and
non ferrous metal.
does not affect most rubbers
and plastics.
can be cleaned easily with
dry cloth.
Op temp: ‐40 to 480 C Efficiently resists effect of
Density : 1.50 gm/cc oxygen,sulphur capable of
oxidizing metals at elevated
temperature.

38. Sprays
o Product Field of Application Properties Appearance/Base
Code
9 R795 Release agent for Good releasing Colourless
Releasing rubber,epoxy properties. Polymer based
agent moulding.
spray
Technical Details Advantages/Benefits
Op temp: ‐40 to 480 C Efficiently resists effect of
Density @ 27C : 1gm/cc compatible with most
Viscosity @ 25C : 400‐410 elastomers.
Flash Point : greater than 240

39. Our COur CClientsClients