L’International Convention on the Control of Harmful Anti-fouling Systems impedisce, attraverso un’apposita normativa, l’utilizzo su carena di pitture antivegetative contenenti sostanze agenti come biocidi. La Convenzione è entrata in vigore il 17 settembre 2008 e la nostra analisi è rivolta a quei prodotti su base siliconica che prevedono l’aggiunta di polimeri super assorbenti e non solubili in acqua, che saranno testati sulla carena di una petroliera della compagnia, in occasione dei prossimi lavori di bacino. L’inquinamento dovuto all’introduzione di specie marine invasive tramite l’acqua di zavorra, è una delle maggiori minacce per i mari. Per questo motivo l’IMO ha introdotto nel 2004 la normativa BWM, che entrerà in vigore con diverse scadenze, scandite per navi nuove ed esistenti. La scelta della migliore soluzione, in termini di impianto, dipende da svariati parametri che devono tener conto sia dell’aspetto tecnico, che economico. The International Convention on the Control of Harmful Anti-fouling Systems on Ships will prohibit the use of harmful organ tins in anti-fouling paints used on ships. The convention entered into force on 17 September 2008 and our analysis it’s about a product based on patented fluoropolymer foul release technology, that will be tested on a tanker’s hull of the company during the next dry docking. The technology provides a smooth, low-energy surface to which fouling organisms either cannot attach, or to which they adhere only loosely and can therefore be easily removed. Pollution due to the introduction of marine invasive species through ballast water of the vessels has been identified as one of the greatest treats for seas. The International Convention for the Control and Management of Ballast Water and Sediments was adopted in February, 2004. The Convention will be adopted with different deadlines scheduled for new and existing ships, provides for the discharge parameters of the BW. Choosing the best solution depends on economic and technical parameters.