ANALYSIS OF SIC BASED POWER ELECTRONIC INVERTERS FOR HIGH SPEED MACHINES,2015 Power Electronics Projects Training
Contact: IIS TECHNOLOGIES
ph:9952077540,landline:044 42637391
mail:info@iistechnologies.in
www.iistechnologies.in
TỔNG ÔN TẬP THI VÀO LỚP 10 MÔN TIẾNG ANH NĂM HỌC 2023 - 2024 CÓ ĐÁP ÁN (NGỮ Â...
ANALYSIS OF SIC BASED POWER ELECTRONIC INVERTERS FOR HIGH SPEED MACHINES
1. ANALYSIS OF SIC BASED POWER ELECTRONIC
INVERTERS FOR HIGH SPEED MACHINES
Presented by
IIS TECHNOLOGIES
No: 40, C-Block,First Floor,HIET Campus,
North Parade Road,St.Thomas Mount,
Chennai, Tamil Nadu 600016.
Landline:044 4263 7391,mob:9952077540.
Email:info@iistechnologies.in,
Web:www.iistechnologies.in
www.iistechnologies.in
Ph: 9952077540
2. Abstract
• Silicon carbide (SiC) based power switching devices have been extensively studied by researchers
and engineers in recent years because of their superior physical properties compared to silicon.
• However, the benefits of using SiC devices have yet to be fully explored, especially for highspeed
or high-fundamental frequency motor drive applications.
• Hence, this paper contributes to the understanding of the benefits of SiC inverters as applied to
high-speed or high-fundamental frequency drives.
• This research investigates the high switching frequency capabilities of SiC inverter to improve the
performance of high-speed machines or high fundamental frequency operation and achieve
lower weight and volume of the both motor and inverter
www.iistechnologies.in
Ph: 9952077540
4. Existing System
• High-speed electric machine systems have been used widely in the industry recently due to
advantages such as high power density and relatively small weight and volume.
• There is an increasing interest in designing high-speed machines with larger number of poles to
further achieve the reduction of weight and volume.
• The fundamental frequency required by these machines can be multiples of kilo-Hertz. Silicon (Si)
IGBT technology has a major limitation to achieve these high fundamental frequency generations
in kHz range because of maximum switching frequency limitations.
www.iistechnologies.in
Ph: 9952077540
5. Proposed System
• Due to the low loss characteristics, SiC based inverters can operate with much higher efficiency
than similarly sized Si inverter if the switching frequency and power rating are the same.
• The increased efficiency gain will translate into energy savings and weight reduction. Many
researchers have looked into the higher efficiency aspect, but they typically focused on low speed
machines.
• In reference, a SiC JFET-based integrated six-pack power module is characterized.
www.iistechnologies.in
Ph: 9952077540
6. TOOLS AND SOFTWARE USED
• MP LAB
• ORCAD/PSPICE
• MATLAB/SIMULINK
www.iistechnologies.in
Ph: 9952077540