1. Nuovissimo stucco poliestere universale
ultraleggero (1,0 Kg/L )
con microsfere di ultima generazione.
Estremamente spatolabile, coniuga ottime proprietà
riempitive con facilità di carteggiatura.
Non aggiunge peso ai manufatti.
Disponibile nel colore crema.
The new universal lightweight (1 Kg/L)
polyester bodyfiller with new-generation microspheres.
Excellent spreadability, it combines excellent filling
properties together with the easiest sanding.
It does not weight down the repair piece.
Available in cream colour.
S61 ONELIGHT.
POLYESTER LIGHT WEIGHT
BODYFILLER.
S61 ONELIGHT.
STUCCO
POLIESTERE LEGGERO.
www.icrsprint.it
2. B) NOTE TECNICHE:
Composizione: Resine poliestere insature e cariche speciali
Peso specifico: 1,0 ± 0,05 Kg/Lt
Colori disponibili: Giallo
Dati di sicurezza: Fare riferimento alla scheda di sicurezza
C) PREPARAZIONE DEL SUPPORTO:
• Lamiera zincata, alluminio e sue leghe, ferro,
lamiera d’acciaio, plastiche
• Vernici Originali o vecchie verniciature ben consolidate
• Pulire bene la superficie da trattare con Antisil V09
e assicurarsi che sia asciutta e priva di silicone, cere
grassi e sostanze estranee in genere
• Su fondi o smalti carteggiare e pulire la superficie
prima di stuccare
D) AVVERTENZE:
> Miscelare accuratamente lo stucco con il 1-3%
di induritore in pasta. Evitare l’uso di una dose eccessiva
di induritore perchè potrebbero generarsi macchie
di perossido in fase di verniciatura.
> Non utilizzare il prodotto a temperature inferiori a 5°C.
> Conservare in luogo fresco ed asciutto.
E) LAVORAZIONE:
1-3% induritore in pasta potlife 3-5’ a 20° C
Applicazione a spatola
< 30’ a 20° C
4-5’ a 1 mt
P60-P120 sgrossatura
P180-P220 rifinitura
F) PULIZIA DEGLI ATTREZZI:
> Con diluente nitro o da lavaggio.
G) PROSECUZIONE DELLA LAVORAZIONE:
> Primer 1K
> Fondi 2K: Acrilici, Poliacrilici, PE, Epoxy
Le informazioni tecniche ed i suggerimenti sono conformi a quanto risulta dalle
nostre esperienze. Noi assicuriamo la perfetta qualità del prodotto. Tuttavia, non
essendo le condizioni di utilizzo sotto il nostro controllo, non assumiamo nessuna
responsabilità sui risultati ottenuti.
A) DESCRIZIONE E CAMPO D’IMPIEGO:
Stucco universale ultraleggero per la stuccatura di ogni tipo di supporto,
dotato di ottima spatolabilità e compattezza. La sua particolare compo-
sizione permette una eccezionale carteggiabilità, minima permeabilità
all’umidità, forte potere adesivo ed ottima finitura. Non aggiunge peso
ai manufatti dove la leggerezza è importante come nei settori nautica,
aeronautica, veicoli industriali, autobus, ecc.
Durante la carteggiatura si ha una maggiore quantità di materiale
asportato a particelle grosse con una notevole riduzione di polvere
dispersa nell’ambiente. Il VOC del prodotto pronto all’uso misurato
secondo ISO 11890 risulta inferiore ai 250 g/l, limite di categoria
dettato dalla Normativa Europea 2004/42.
IT SCHEDA TECNICA S61
S61 ONELIGHT BODYFILLER YELLOW
Stucco poliestere universale ultraleggero
S61 ONELIGHT BODYFILLER YELLOW
Universal polyester ultra-light weight putty
A) DESCRIPTION AND FIELDS OF APPLICATION:
Universal putty with an ultra-light specific weight to treat every kind of
surface, it characterizes for a very easy application by knife and an
excellent compactness. Its specific formulation allows a particularly easy
sanding, a very low permeability to humidity, a strong adhesion and
an excellent finishing. It is particularly suitable for nautical applications,
industrial vehicles, buses, etc. every time the lightness is an important
topic.
The sanding of a higher quantity composed by big particles allows
the strong reduction of powders dispersion.Voc < 250 g/l according
2004/42CE.
EN TECHNICAL SHEET S61
INDUSTRIA CHIMICA REGGIANA - I.C.R. S.p.A - Sede e Stabilimento: 42124 Reggio Emilia - Via M. Gasparini, 7 - Tel. +39 0522 517803 - Fax +39 0522 514384
Stabilimento di Lodi: 26817 S. Martino in Strada (LO) - Via del Commercio, 1 - Tel. +39 0371 475313 - Fax +39 0371 475370 - info@icrsprint.it - www.icrsprint.it
ICR Ibérica S.A. - Pol. Ind. Sta. Magdalena, C/ Guillem Rovirosa 18-24 - 08800 Vilanova i la Geltrú, España - Tel. +34 93 8932695 - Fax +34 93 8143495 - info@icriberica.com
B) TECHNICAL DATA:
Composition: Unsatured polyestere resins and special fillers
Specific weight: 1.0 ± 0.05 Kg/Lt
Available colours: Yellow
Safety data: Refer to the safety sheet
C) SURFACE PREPARATION:
• Galvanized sheets, aluminium and its alloys, iron,
steel plates, plastics
• Original paints or aged topcoat finishes
• Clean well the surface to be treated with V09 Antisil.
Make sure it is dry and free from silicone, wax, grease
and any extraneous material
• On base coats or enamel top coats, sand and clean
the surface before applying the filler
D) AVVERTENZE:
> Mix well the filler with 1-3 % paste hardener.
Do not exceed with the hardener to avoid risk
of staining during painting operations.
> Do not utilize the product at temperatures below 5°C.
> Store in a cool and dry place.
E) PROCESSING:
1-3% C10 paste hardener potlife 3-5’ at 20° C
Application with putty knife
< 30’ at 20° C
4-5’ at 1 mt
P60-P120 coarse sanding
P180-P220 finishing
F) TOOLS CLEANING:
> With nitro or washing thinner.
G) RECOATING:
> 1K Primer
> 2K Fillers: Acrylic, Polyurethane, PE, Epoxy
Technical indications and advices are based on our own experiences.
We assure the perfect quality of products. However, being the utilization out of our
control, we assume no responsibility on the results obtained.